Develop Bugs

[MPD24.107-70 DEBLOATED] iniro_mxp_rom_6.0.1_v1.2

Hi,
Here is my second version of iniro_mxp_rom based on XT1562 MPD24.107-70 (Android 6.0.1).
It is debloated but it has Google Apps, moto display and miracast working. FMRadio too and more stuff.
It has xposed installed.
Bootanimation and logo are changed to simplest one.
This rom is rooted.
The kernel is Phoenix Kernel to have notification led enabled by default.
Also it has more ringtones.
Credits and thanks:
eskamhl's for Marshmallux
minimale_ldz
AnoopKumar for Phoenix Kernel
C. Ghisler - Total Commander creator
Klaus Weidner - Hacker's Keyboard creator
TeslaCoil - Nova Launcher creator
Installation requisites:
-Custom Recovery (TWRP 3.0.2-r3 recommended)
Installation:
-Wipe /system /data /cache /dalvik-cache
-Install .zip
-Reboot and enjoy
Download:
iniro_mxp_rom_6.0.1_v1.2:
https://drive.google.com/file/d/0B33xcE352phbZFk2eGRPX3ZjUjA/view?usp=drivesdk
Extras:
Notification Led enabler: https://drive.google.com/open?id=0B33xcE352phbRFVFN3BmUVdnSlE
Notification Led disabler: https://drive.google.com/open?id=0B33xcE352phbYV9NaFdsY21TTjA
Moto display enabler: https://drive.google.com/open?id=0B33xcE352phbRVZHTU1HamFEVFk
Moto display disabler: https://drive.google.com/open?id=0B33xcE352phbcVQ3Uk14d2ZzV0E
24.107-70 baseband: https://drive.google.com/open?id=0B33xcE352phbNkIxeWZWV2pKUXc
VoLTE fix: https://drive.google.com/open?id=0B33xcE352phbaUdhdnpqQ09ldFU
Stock kernel: iniro_mxp_rom_MPD24.107-70-Stock_Kernel:
https://drive.google.com/open?id=0B33xcE352phbbEQyRjg1a3JnSDg

What's the differces between yours and this
http://forum.xda-developers.com/moto-x-play/development/rom-stock-debloated-rom-6-0-1-t3432821

This rom is a flashable zip and not a twrp backup. Base rom is the same in both roms. Preinstalled apps,... are not the same.

link not found

diegomartinezlovey said:
link not found
Click to expand...
Click to collapse
Thx for advice. Now is up

Sorry, but the link still doesn't seem to be working.
Sent from my XT1562 using Tapatalk

So Dual SIM?

I installed the ROM on my Indian version of x play 1562 ds. But my phone didn't boot. It did not proceed beyond the android screen. So I had to revert back to my backup. I am on the same version of stock firmware.

I will install this rom, Thanks!

It is Asia dual sim version. Please check link again, it is working for me. Thx.

situ1962 said:
I installed the ROM on my Indian version of x play 1562 ds. But my phone didn't boot. It did not proceed beyond the android screen. So I had to revert back to my backup. I am on the same version of stock firmware.
Click to expand...
Click to collapse
Do you wipe before flash? When it boots, boots two times, one for splash and one more for the rom. First rom boots takes some time.

Thanks a lot, that's what I'm looking for.
Just flashed it a few hours back, and it works like a charm on my Middle Eastern XT1562 dual sim.
Performance is smoother than stock, no doubt. Gonna use it and see how it goes with the battery backup.
A little issue happens here (no big deal to me) is Moto Display. It is ON by default and I couldn't find any options in app drawer as an app, nor in device settings. I looked into files and I found it in priv-app, copied it to storage and reinstall it, then I got it FC twice, I rebooted then again I got it FC twice.
Booted into recovery and deleted the Moto Display folder, reboot into system then got FC twice, eventually its not working anymore (that's what I want), so the Moto Display and FC are no biggies.
Good job bud, I'll feedback soon.

iniro said:
Do you wipe before flash? When it boots, boots two times, one for splash and one more for the rom. First rom boots takes some time.
Click to expand...
Click to collapse
Yes,I wipe as mentioned in the op.But at the end of wiping process a red error message is displayed 'unable to mount storage'.Is it the issue or is it normal?
Also,how much time it should take for the initial booting?
Edit: Problem solved.I wiped the phone from recovery and then it booted ok.But it seems the rom is not rooted.So I had to flash supersu 2.62 version.Now I shall try it for a couple of days and shall report here.Thanks for the rom.
Edit 1:Scrolling is not smooth as it should be.It is a bit laggy.Also led not working.How to enable it?

volte support?
is this rom having the update of volte ?

Two things I want to disable:
1/ LED notifications
2/ Moto Display
Any help please?

Zeez Saud said:
Two things I want to disable:
1/ LED notifications
2/ Moto Display
Any help please?
Click to expand...
Click to collapse
I updated OP with extra links:
Extras:
Notification Led enabler: https://drive.google.com/open?id=0B33xcE352phbRFVFN3BmUVdnSlE
Notification Led disabler: https://drive.google.com/open?id=0B33xcE352phbYV9NaFdsY21TTjA
Moto display enabler: https://drive.google.com/open?id=0B33xcE352phbRVZHTU1HamFEVFk
Moto display disabler: https://drive.google.com/open?id=0B33xcE352phbcVQ3Uk14d2ZzV0E
Thx!

Rahil0597 said:
is this rom having the update of volte ?
Click to expand...
Click to collapse
If Asian DS MPD24.107-70 have update of VOLTE, this one too. But I dont know how to check it. Sorry. If you know how please I will take a look for it.

situ1962 said:
Yes,I wipe as mentioned in the op.But at the end of wiping process a red error message is displayed 'unable to mount storage'.Is it the issue or is it normal?
Also,how much time it should take for the initial booting?
Edit: Problem solved.I wiped the phone from recovery and then it booted ok.But it seems the rom is not rooted.So I had to flash supersu 2.62 version.Now I shall try it for a couple of days and shall report here.Thanks for the rom.
Edit 1:Scrolling is not smooth as it should be.It is a bit laggy.Also led not working.How to enable it?
Click to expand...
Click to collapse
Once rom is installed is necessary to update supersu binaries. Thx!

iniro said:
Once rom is installed is necessary to update supersu binaries. Thx!
Click to expand...
Click to collapse
OK.Thanks.The led works for notifications only,not for charging.Can it be enabled?After some time the rom is running smoothly. I think it took time to optimize.
This version of Indian firmware has inbuilt VoLTE.By dialing *#*#4636#*#* we can enter to settings menu.There is an entry named TURN OFF VOLTE PROVISION FLAG.Since VoLTE is mentioned,I think it is present.

thanks for building this rom. fast and smooth.
i wanted to get supersu updated to 2.76, but after flash it in TWRP, the older version supersu disappeared and new version not installed,
any idea, please.

[G800F/M/Y][ROM][7.1][NDE63P] CyanogenMod 14.1 for G800F/M/Y [Test 07/11/2016][eol]

CyanogenMod is discontinued.
This ROM is continued as a LineageOS ROM.
Check the G800F LineageOS ROM for more info.
This is a CyanogenMod 14.1 ROM for the Exynos3470 based Samsung Galaxy S5 mini (G800F/G800M/G800Y).
DO NOT USE IT FOR G800H OR YOU WILL BRICK YOUR DEVICE
Although G800F and G800H share the same name they are not related in terms of hardware due to the different SoCs used (Exynos vs. Snapdragon).
Hence please do not ask for support or ROMs for the G800H.
Important note: It is possible that flashing this ROM can cause efs partition issues. Therefore it is strongly recommended to make a backup of your efs partition before flashing this ROM. This can be done via TWRP.
Working features
HW accelerated GUI
Camera (pictures+video: Back+Front) (switching between camera and video-recording might crash the camera-app)
MTP storage
Flash Light
Bluetooth (A2DP, HFP, HID)
IR
Sound
SMS
Initiate and receive calls (the first ingoing call seems to have no sound)
Wifi
Mobile Data
USB-OTG (Keyboard, Mouse, USB-Audio, Mass-Storage)
NFC
Hardware sensors (Orientation, Compass, Proximity, Acceleration, Hall sensor, Step counter)
Light sensor (needed for auto-brightness)
Pulse sensor (preliminary and very inaccurate. Works with Apps like Kardiograph)
SD-Card as internal storage (new Android M feature)
GPS
Fingerprint scanner
Non-working features:
SELinux
Known issues:
See the Bug Report section of this thread
Disclaimer:
You flash this image at your own responsibility. I am not responsible for any damage that might be caused by flashing this image (bricked device, lost data, ...)
Flashing this kernel image will trigger the KNOX counter, so your warranty will be void.
Applications that use KNOX (e.g. "Private Mode") might not work anymore when returning to the stock ROM, as the device is regarded as compromised. Do not flash this ROM if you need those applications.
The image is only for Exynos3470 based S5 Mini variants SM-G800F/M/Y.
It might be instable, crash your device, drain your battery, or even might damage your smartphone (e.g. if an USB-OTG device drains too much power)
Some users reported that their touch-screen stopped working permanently after some weeks of usage. For some user's (two at the moment including me) NFC stopped working permanently. Probably this issues are not related to this ROM as also many stock user's complain about hardware issues (random reboots, black screens, unresponsive touchscreen) but you have been warned.
Backup your data before flashing and check if the original firmware is present (e.g. at SamMobile)
Click to expand...
Click to collapse
Before you start:
Backup your data, like call history, contacts, sms, WhatsApp messages, favourite app settings that are on internal and external sd (by using Titanium Backup or other apps available on PlayStore). At least all internal data will be lost in any case. If you have bad luck you might also loose data from your external sd card.
Download:
Odin3-v3.07 (it is contained in CF-Auto-Root)
TWRP 3.0.0 recovery image [25/03/2016] (AndroidFileHost Mirror)
CM 14.1 ROM for G800F/M/Y (Android File Host)
Google Apps (contains Google Play, ...) for Android 7.1. The following is recommended:
Open GApps Project, Platform:ARM, Android:7.1, Variant: whatever you prefer (e.g. "mini" or "nano")
Install recovery:
Reboot your device into Odin mode: turn off your device, then press Volume-Down + Home + Power button at the same time and release them.
Confirm the following warning message with the Volume-Up button.
Connect your device to your PC via USB
Make sure the device driver's are installed on your PC
Start Odin
In Odin select PDA and select the recovery image (recovery.tar.md5)
Check that only "Auto Reboot" and "F. Reset Time" is set
Click on "Start": the kernel image should be flashed now and the device should reboot afterwards. By flashing the recovery, your warranty will be void.
After the recovery flashing process was successful, power of your device. If not restart into Download mode and flash again or flash the stock rom.
Before you flash:
You need the latest TWRP recovery (see above). Otherwise TWRP might not be able to flash the ROM. This is because TWRP checks now if the device is "supported".
Wipe the device to avoid problems with remaining files from the old installation (see instructions below). This also applies if you already installed an older version of CM 14.1.
Flash CyanogenMod:
Reboot into recovery mode (Press Volume-Up + Home + Power button)
If you come from a stock ROM, this is your opportunity to make a Backup of your phone(Backup, then select Boot, System, Data, then swipe to backup). Note that the recovery might fail to restore the backup when you want to go back to the stock ROM (for me it got stuck after a restore during boot. But the backup was made with a different version of TWRP, so it might work in general) - simply do not expect too much of it at the moment.
If you haven't copied the installation files yet, you can now copy the GApps and CyanogenMod zip to your internal sd or external sd (be careful not to put the files into the data directory of the internal sd card as this will be deleted in the next step). Be sure that MTP is enabled (inside Mounts, click on Enable MTP), then, from your pc, copy the files. If MTP does not work from recovery, try it directly from Android or remove the external sd card from the phone and put it into your PC.
Wipe Dalvik Cache, Cache, System and Data (inside Wipe -> Advanced Wipe). Do not report problems if you did not wipe those partitions as the problems are most probably related to this!
Install the CM ROM zip-package
Install the GApps zip-package
How to root:
No SuperSu is needed as CyanogenMod already comes with integrated root support. Root access is disabled by default.
You normally do not need root access. If you want to activate root access for apps, do the following:
Open the Settings menu, select "About Phone"
Tap on the "Build number" entry seven times. You should be notified, that the developer settings are now active.
Open the Settings menu, select "Developer options". Enable root access by selecting "Apps" in the "Root-Access" setting.
In case you want to go back to the stock ROM:
lf you do not have the latest ROM for the G800F you can download it from SamMobile
Reboot your phone into Odin mode
Open Odin on your PC and connect your smartphone with your PC via USB
If you have a zip-file unzip it so that you have a .tar.md5 file
In Odin click on the PDA button and select the .tar.md5 file. Then press "Start".
Normally the stock rom fails to boot as the data from CM is still on the data partition. So after flashing the stock rom, reboot into recovery mode (it looks a bit different now). First wipe the data partition, then wipe the cache.
Reboot
Changelog
Code:
07/11/2016:
* Initial test build
This section is for developers:
A README file with build instructions can be found here:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
Sources:
Code:
https://github.com/cm-3470/android_device_samsung_kminilte
https://github.com/cm-3470/android_vendor_samsung_kminilte
https://github.com/cm-3470/android_kernel_samsung_kminilte
https://github.com/cm-3470/android_device_samsung_smdk3470-common
Developers welcome
At the moment the G800F/M/Y specific port of this ROM is only done by two persons (CTXz and hennymcc). Although Unjustified Dev also works on this ROM he does not own an Galaxy S5 Mini but a Galaxy Light which has a similar base but is different when it comes to camera, nfc and other components (maybe even slightly when it comes to audio and radio).
Help from other developers is always welcome. See the bug/feature section and this thread to see what is missing. Just give some short info (here in this thread or PM) that you want to work on some issue or feature so that work can be synchronized. Maybe there are also other devs that want to work with you on the same issue.
Knowledge in how the kernel works and good programming skills in C, C++ and Java would be nice but not necessary for all problems. At least you should be able to build the ROM and test your changes yourself but you do not need experience in porting ROMs.
Thanks to CTXz, Psyafter, spookcity138 and ayke for working on this ROM.
XDA:DevDB Information
[G800F/M/Y][ROM][7.1][NDE63P] CyanogenMod 14.1 for G800F/M/Y [Test 07/11/2016][eol], ROM for the Samsung Galaxy S5 Mini
Contributors
hennymcc, CTXz, spookcity138, psyafter, ayke
Source Code: https://github.com/cm-3470
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: TWRP Recovery [version >= 15/08/2015]
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-11-07
Last Updated 2017-02-01

Reserved
This is just a test build. CM 14.1 is not released yet and still instable. There are lots of known issues.
Here a short list of known problems:
First incoming call has no sound
Camera app crashes when you try to switch between camera and video recording mode (in this case: restart the app and recording will work)
Messages with "Browser crashed" will occur from time to time
The default browser does not always display all the text that was typed into a text field.

This was an awesome ROM but now I propose LineageOS 14.1

It works perfect (at least until now) for me ? great job
I hope @ayke brings OTA updates here to make everything easier
Enviado desde mi SM-G800F mediante Tapatalk

This rom is really great! Smooth and without big issues. Everything works as you said and here are some screenshots of Antutu if someone need them. Thanks devs!

What's the problem with first income call? The first one is the only one with no sound?

Great job Henny

@hennymcc
Robotic voice again ��
Everything else works fine
===========================
Guys I've been testing the Rom for a few hours, and it's preety awesome.
The only bad thing is the robotic voice. @spookcity138
As i remember you fixed this last time
Do your stuff mate

CostasGr said:
@hennymcc
Robotic voice again ��
Everything else works fine
===========================
Guys I've been testing the Rom for a few hours, and it's preety awesome.
The only bad thing is the robotic voice. @spookcity138
As i remember you fixed this last time
Do your stuff mate
Click to expand...
Click to collapse
what about battery drain?

sgilyin said:
what about battery drain?
Click to expand...
Click to collapse
seems normal so far

is this normal?
CostasGr said:
seems normal so far
Click to expand...
Click to collapse

With my usage yes.
The only problem is robotic voice

Hey !
Thanks for your amazing job (all of you), I don't have any browser crashes since I use chrome and I remove the stock browser, I also don't have any crash with my camera. I use Google Camera for that. Here is a list of bugs I've noticed:
- Chrome (stable) has crashed the first time I've opened it (only one time, that's why I did say that I don't have any browser crashes)
- Sometimes, something like "MTP Host" crashes..
- In Allo, while sending a message, there's a little sound, that's not a bug since it's in the app... But that sound is garbled (I don't know if that word is correct, I've used Google Translate for it)
I guess that's all..
Also, I don't have robotic voice... Good bye ! And thanks again
EDIT: About the "MTP Host" app.. it's the download app :/

Bugs
Hi there, thanks for your work on the rom really enjoying it and love Android 7.
Throughout my use I have discovered a bug with YouTube (not sure if it's the app or rom, but reporting anyway as did not happen on Mm) where changing into 720p causes the app to zoom into the upper left corner of the video. It can be remedied buy only using 360p but is rather annoying.
Again thanks for the work on the rom and all the best in the future. ?

Anyone have the link for xposed framework of this version?

Thomzey said:
Hi there, thanks for your work on the rom really enjoying it and love Android 7.
Throughout my use I have discovered a bug with YouTube (not sure if it's the app or rom, but reporting anyway as did not happen on Mm) where changing into 720p causes the app to zoom into the upper left corner of the video. It can be remedied buy only using 360p but is rather annoying.
Again thanks for the work on the rom and all the best in the future. ?
Click to expand...
Click to collapse
I also experienced that with some internet players when watching HD content..
Enviado desde mi SM-G800F mediante Tapatalk

CostasGr said:
@hennymcc
Robotic voice again ��
Everything else works fine
===========================
Guys I've been testing the Rom for a few hours, and it's preety awesome.
The only bad thing is the robotic voice. @spookcity138
As i remember you fixed this last time
Do your stuff mate
Click to expand...
Click to collapse
Well,as of now my sim card is not detected on CM14 for some strange reason. I seem to be alone in that. The robotic voice,if I remember correctly is linked to using the LP libs. Maybe someday we'll see official MM for the g800f. [emoji3]
Sent from my SM-G800F using Tapatalk

spookcity138 said:
Well,as of now my sim card is not detected on CM14 for some strange reason. I seem to be alone in that. The robotic voice,if I remember correctly is linked to using the LP libs. Maybe someday we'll see official MM for the g800f. [emoji3]
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
You had changed the device tree as I remember and you fixed it last time ( I might be wrong I have no idea about developing) anyhow any help would be awesome because I need my phone for my work so I cant have that robotic voice... Thank you

Great job guys :good:
What are the chances like to get a first update soon? Or better said, moving to beta status?
I think the user respondings are quit positiv so far.
Greetings
Sunn76

Sunn76 said:
Great job guys :good:
What are the chances like to get a first update soon? Or better said, moving to beta status?
I think the user respondings are quit positiv so far.
Greetings
Sunn76
Click to expand...
Click to collapse
Most oft the current issues are Cm related so the CM-Team needs to update their sources time by time
Sent from my SM-G800F using XDA-Developers mobile app

[P901] [7.1.2] lineageos 14.1 v1a3g

This Lineage Os 14.1 rom
To use s pen sensor script, you have to install root app like Magisk.
The kernel uses swapfile in data partition , you can adjust swappiness by editing the "01swappiness" file in /etc/init.d/01swappiness , I set default to 10.
Now, AEC had been added to voice call, the far-end will no longer have echo.
But have to test more on AEC.
BUILT LOG
Last Update: All codes up to date 14/02/2021
Built Log: Update up to date 16/02/2021
16/02/2021 Voip on bluetooth is not working any more
16/01/2020
Fixed audio Hal and Kernel for Bluetooth communication like Line, Skype, and Messenger. Now bluetooth works perfectly both up and down stream.
16/07/2019
Fixed spen-detection script and make it runs with less power.
04/06/2019
Update source code and fixed spen-detection script.
24/02/2019
Update audioeffect and Enable and improve Voice call AEC.
21/02/2019
update hal path and adjust volume not to loud
update kernel , on some fs.
Built Log: Update up to date 4/1/2019
This version update the s pen input sensor to enable/disable touch screen input when using s pen.
ROM:
Lastest version:https://cloud.degoo.com/share/Q1A-1zzZ5Fdpf2cKTohNig
Features:
All working, with auto voice call recording for every call.
First time just enable voice call recording, on incall ui click record, and give permission, to record. Then after end call set the autorecording . On next call it will autometically record all call.
Now Bluetooth voice communication work perfectly on Line, Skype, Messenger.
Khomsn
Source: https://github.com/lineageos
Kernel: https://github.com/khomsn/android_kernel_samsung_v1a3g
Device:https://github.com/khomsn/device_samsung_v1a3g
vendor:https://github.com/khomsn/vendor_samsung_v1a3g

Thanks for the effort, i have the following questions:
Is it rooted?
Can i dirty flash it on the unofficial 7.1.x?
Is the phone call voice transmission working both ways , meaning the person on the other side of the e call can actually hear you, as this is the current issue with 7.1.x?

yamosaad said:
Thanks for the effort, i have the following questions:
Is it rooted?
Can i dirty flash it on the unofficial 7.1.x?
Is the phone call voice transmission working both ways , meaning the person on the other side of the e call can actually hear you, as this is the current issue with 7.1.x?
Click to expand...
Click to collapse
1. Yes ready for root, you can use any root tool like SuperSU or Masigk.
2. Yes you can but clean flash is better.
3. yes both ways on speaker/headset/bluetooth
and recording is clear both ways.
Try it.

Thank you for work. I have a problem with S-pen. Spen working good only when my palm is above the screen, when palm lying down on the screen, spen doesn't working at all. With this issue it's impossible to use spen comfortably.

grigoras said:
Thank you for work. I have a problem with S-pen. Spen working good only when my palm is above the screen, when palm lying down on the screen, spen doesn't working at all. With this issue it's impossible to use spen comfortably.
Click to expand...
Click to collapse
Now I have updated my build so Touchscreen Input will be disabled when S-pen is near by the screen and will be enabled when S-pen is far away. So we can use spen confortably NOW:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:.
Will Share on Finished next built

thanks, man for this wonderful rom. pls, how do I install google apps?

9ja Droid boy said:
thanks, man for this wonderful rom. pls, how do I install google apps?
Click to expand...
Click to collapse
TWRP, Go to recovery and install gapps.zip

khomsn said:
TWRP, Go to recovery and install gapps.zip
Click to expand...
Click to collapse
OK.. I don't know the right Google app to download I tried flashing the one I downloaded I got an error "not compatible that I should download the right app" pls can u help me with the right link?

9ja Droid boy said:
OK.. I don't know the right Google app to download I tried flashing the one I downloaded I got an error "not compatible that I should download the right app" pls can u help me with the right link?
Click to expand...
Click to collapse
https://opengapps.org/
please select, Platform:ARM, Android:7.1, any Variant: from Aroma to Pico.

khomsn said:
https://opengapps.org/
please select, Platform:ARM, Android:7.1, any Variant: from Aroma to Pico.
Click to expand...
Click to collapse
Appreciated bro..

New Update on GDrive Now.

New update with Voice call AEC

i got black blank screen after flash with twrp. what should I do? Please help

mejonay said:
i got black blank screen after flash with twrp. what should I do? Please help
Click to expand...
Click to collapse
Reboot to twrp, wipe cache , check and fix system+data partition then reboot

Hi, thanks for this ROM, I'm planning to install it this weekend on my device.
Just a quick question, though: what is the difference between this one and the one here: https://forum.xda-developers.com/galaxy-note-pro-12/development/rom-7-1-xsm-p901-unofficial-lineageos-t3576054?

indotoonster said:
Hi, thanks for this ROM, I'm planning to install it this weekend on my device.
Just a quick question, though: what is the difference between this one and the one here: https://forum.xda-developers.com/galaxy-note-pro-12/development/rom-7-1-xsm-p901-unofficial-lineageos-t3576054?
Click to expand...
Click to collapse
That is the old post , which was locked by idiet Admin.

khomsn said:
That is the old post , which was locked by idiet Admin.
Click to expand...
Click to collapse
Uh...I am the OP of that post and it is not locked!

gcrutchr said:
Uh...I am the OP of that post and it is not locked!
Click to expand...
Click to collapse
Sorry miss understand:crying:

New update, previous built SPen script is broken.

Hi, my device are SM-P901, and I cannot flash to this custom ROM.
When flashing, it says like this in TWRP:
patched image unconditionally
unknown command (log) (with red line on it)
Can you help me? I really want to boot it to LineageOS..
Thank you before

[DISCONTINUED][ROM][9.0][SM-G930F] Lightheart OS [30/10/2020]

Lightheart 1.0 - The key to speed.​
Hi everyone. My name is Skulldron and for those of you who do recognise me, know me as the creator of Project Pixel, another one of the greatest ways to emulate the Pixel Experience, whilst keeping all the benefits of using OneUI and its stock optimized drivers as its base. Today I'm going to introduce something, different. Over the years of working on Touchwiz based ROMs, I've learnt the description of every little apk, every little permission, what it accepts and what it rejects, its pros and its cons. As a result of this experience, I have one of the best debloat lists out there, with each item on the debloat list, being tested, through extensive testing, and it goes over every file and every partition known in the OneUI OS. This exact same debloat script was used in Project Pixel, which has received positive review after positive review for how efficient and how lightweight OneUI became after the debloat. Today however, I present to you Lightheart OS, a new project that I will be building myself and updating monthly. Today I showcase Lionheart, the Lineage OS to my Cyanogenmod.
Key Features:
1. Heavily Debloated System: The debloat script that was made by me, has over 250+ debloated permissions, apks and other files.
2. Better Battery Performance due to Efficiency - With the removal of an incredible amount of bloat, along with better performance and lesser services, you should be looking at better SOTs and better standby times.
3. Kernel Power Control: With MTweaks and Magisk, you will be able to control your device’s clock speed and be able to force higher GPU and CPU Clock, when doing more intensive tasks such as gaming.
4. Better Kernel Performance - Due to the deepness of the debloat, the kernel now has more RAM and more space to be more efficient and allow it to focus on less threads at once.
5. Latest available patch with the promise of updates every month - Every month an update is released, the ROM will be updated along with it, with a time frame of 1-2 weeks.
6. Restored some stock Google Permissions - Some stock google framework was restored, such as the default setup wizard.
7. All Essential Samsung Features have been kept - All essential OneUI features have been kept alive, for the sole purpose of necessity.
8. Completely Deknoxed -The ROM has been Deknoxed and FRP lock measures have been disabled
9. VoLTE Supported
Individual Features:
1. AdAway
2. Eleven Music
3. Files GO
4. GBoard
5. Android Pie AOSP Emojis
6. Lightheart X Boot Animation
7. AOSP System Sounds
8. Samsung Gallery (Stripped Down and lightened to improve performance)
9. Samsung's Stock Camera with HDR parameter changes, debloated and additional video modes
10. SystemUI Tuner (Provides battery stats along with other useful customizations - Check QS icons and add it to QS Panel to view)
11. YouTube Vanced (Ad-free Youtube)
12. Mtweaks (Has Hardware Control - Similar to Kernel Adiutor but more tailored to Exynos)
INSTALL INSTRUCTIONS: (Backup everything,contacts, photos etc.)
1. Download the zip and download the latest Magisk (ROM will not boot if Magisk is not flashed due to encryption procedures)
2. Wipe System, Data, Dalvik Cache and Cache
3. Flash the zip and flash Magisk.
Notes:
- To view Battery Stats and Storage, pull down the Quick Settings Panel and on the top right click the three bubbles button and then Button Order. Then move the new Battery and Storage icon to the Quick Settings.
- Set Trebuchet as default launcher, for better battery savings. OneUI Home was only included for its app switcher.
Changelog:
1.0 - Initial Release
If changes are made, they will be highlighted in the next post.
Download Links:
1. Lightheart 1.0:
https://drive.google.com/file/d/1cqQXrQecOmmXEhXnUx6GL8aV7_Xsarwk/view?usp=sharing
2. Magisk Manager:
https://github.com/topjohnwu/Magisk/releases
3. Magisk:
https://github.com/topjohnwu/Magisk/releases/tag/v20.4
Credits and kernel source:
Cronos Kernel Source: https://github.com/ananjaser1211/Cronos_8890/releases/tag/V4.0-Pie
@arcatarc for permission to use his base
Check the screenshots tab to see screenshots of the ROM in action.
XDA:DevDB Information
Lightheart 1.0, ROM for the Samsung Galaxy S7
Contributors
Skulldron
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Bootloader Available
Based On: OneUI
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-10-30
Created 2020-10-30
Last Updated 2020-10-31

Samsung note fe base???

Hi, thanks for the ROM. Will try it. Could you please provide md5?

Can't use GPay

mie_ayam said:
Samsung note fe base???
Click to expand...
Click to collapse
Yes it is running the base from a Note FE. In particular the SuperLegerra ROM

wow, ... and echo cancellation works perfect ... but two things that I miss so far
the option "kill app back button" in the settings -> developer options ... please don't forget to build-in
the possibility to mount the SD card in the file system
Both options are default in LOS ... and yes, I know it was an initial release.
Thx for your work. we are hopefully waiting for the improvements!
:good::good::good:

Download and trying to install tonight

Info regarding phone stuck on boot pic
Hi there,
I have little experience with custom roms etc. I had installed LineageOS some moths ago as my phone was working poorly on stock rom and now with LOS 17.1 was starting to have problems again. Like an hour ago decided after some research to install this rom. However, after flasing the rom and magisk (I couldnt flash Gapps as error 20 appeared), my phone got completely stuck on boot picture (SAMSUNG GALAXY S7; POWERED BY ANDROID). I have both tried to get into twrp (previously installed) and download mode. No luck in any of the cases. I have tried to do the same from odin, to flash again twrp. However, as I cannot access download mode, I didnt work.
Now, I´m trying my best to figure out how to install some OS and continue from there, or at least be able to flash twrp and install another ROM.
I would much appreciate any advice in the matter.
Thanks in advance.
EDIT: NEW SITUATION. No need of help anymore (by now)

iggamez said:
Hi there,
I have little experience with custom roms etc. I had installed LineageOS some moths ago as my phone was working poorly on stock rom and now with LOS 17.1 was starting to have problems again. Like an hour ago decided after some research to install this rom. However, after flasing the rom and magisk (I couldnt flash Gapps as error 20 appeared), my phone got completely stuck on boot picture (SAMSUNG GALAXY S7; POWERED BY ANDROID). I have both tried to get into twrp (previously installed) and download mode. No luck in any of the cases. I have tried to do the same from odin, to flash again twrp. However, as I cannot access download mode, I didnt work.
Now, I´m trying my best to figure out how to install some OS and continue from there, or at least be able to flash twrp and install another ROM.
I would much appreciate any advice in the matter.
Thanks in advance.
EDIT: NEW SITUATION. No need of help anymore (by now)
Click to expand...
Click to collapse
Could you write down here how you can solved the proble, it might be helpfull for other.

Hi All, has anyone got EdXposed working?
I've installed magisk 21.1, riru core 21.3 , and riru YAHFA 0.4.6.4 EdXposed manager shows framework not active :/

Does mobile hotspot work?
I've been looking for a ROM that has kept the Samsung gallery and camera so I want to try this ROM. but I need to be able to use mobile hotspot so please let me know if it works fine. Thx

Hello, the ROM works great. There are some minor things. Like always on display does not work with option to tap the screen to show for 10 seconds. Also for some reason I can't instal Revolut from the play store. And lastly Titanium backup does not restore all the apps. I could not figure out a way how to make that work.

The hotspot works fine on mine.
I had the same issue with Titanium backup.
In the end I used split screen and installed each app from the play store, then restored data only.
Has anyone got xposed working?

Gapps
Do I need to flash gapps or is it included?
I'm currently using lineage is 16 with gapps. Do I need to flash gapps again if flashing a ROM again? Sorry I'm a newbie.

Wara35 said:
Do I need to flash gapps or is it included?
I'm currently using lineage is 16 with gapps. Do I need to flash gapps again if flashing a ROM again? Sorry I'm a newbie.
Click to expand...
Click to collapse
No gapps needed.
---------- Post added at 03:59 PM ---------- Previous post was at 03:52 PM ----------
@Skulldron, thanks for the ROM, works great and it's stable. Just few things. Could you please update the Adaway app? There is a newer stable version on xda available. I tried to update it myself but it was not possible. Also could you please fix the Always on display function? The tap on screen option does not work.

Blato said:
Hello, the ROM works great. There are some minor things. Like always on display does not work with option to tap the screen to show for 10 seconds. Also for some reason I can't instal Revolut from the play store. And lastly Titanium backup does not restore all the apps. I could not figure out a way how to make that work.
Click to expand...
Click to collapse
As I experienced from other ROM that based on Note FE base, the Galaxy S7 cant show AOD with tap to show mode due to hardware problem, so please choose always show option on the setting

Flashing a different rom, I do like this rom but need xposed and it's annoying that YouTube and adaway are system apps.

6sicSIX said:
Flashing a different rom, I do like this rom but need xposed and it's annoying that YouTube and adaway are system apps.
Click to expand...
Click to collapse
Youtube and Adaway can be removed with System App remover or Link2sd from Play Store. Then you restart the S7 and install Adaway from github and Vanced.app

I do like this rom, espicially the first boot right after install, which was really fast, made an impression. Probably the most battery friendly and lite-weight One UI-Rom one can find. One usability problem for me was the *missing feature that increased touch sensitivity*. With my screenprotector on, I have to push harder and several times before successfully pulling down the notification bar or when writing or selecting.

Is it just me or is SmartSwitch taking a long time/not restoring messages? I get to the part when it would start restoring messages but then it just never loads.. other then that, the ROM is great!

6sicSIX said:
Hi All, has anyone got EdXposed working?
I've installed magisk 21.1, riru core 21.3 , and riru YAHFA 0.4.6.4 EdXposed manager shows framework not active :/
Click to expand...
Click to collapse
I tried many versions of modules ,but no luck .Is possible to work exposed framework?

[SM-P901] [V1A3G] [UNOFFICIAL] [ROM] [EXYNOS5420]Lineage 17.1 | Android 10 Q

I'm not responsible for any damage to your device.
By flashing this you take responsibility of anything that happens to it.
Process at your own risk!
AND FEEL GOOD!​
Now it is time to upgrade our P901 to Android 10 Q​Work
Almost all, I thinks but please give a feedback for any problem and suggestion.
Now P901 can make gsm call / sms / full cellular network.
BT SCO voice call working perfectly on narrow/wide band.
Preinstall v4afx to data partition and working good.
Camera (internal app) can take picture only now.
Video recorder working with app ,like HedgeCam 2, which supports Camera2 API.
Known Issues
- Video recording not working
- S-pen randomly freeze and reboot, still.
- Feedback sound enable will breaks Sound system, Don't enable any feed back sound.
Instructions
1. Install custom recovery
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Full wipe all
4. Flash firmware and gapps
Sources:
https://github.com/Lineageos
https://github.com/LineageOS/android_hardware_samsung
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos
https://github.com/LineageOS/android_hardware_samsung_slsi_exynos5
https://github.com/khomsn/android_hardware_samsung_slsi_openmax
https://github.com/khomsn/android_hardware_samsung_slsi_exynos5420
Kernel: https://github.com/khomsn/android_kernel_samsung_v1a3g
Device: https://github.com/khomsn/device_samsung_v1a3g
Vendor: https://github.com/khomsn/vendor_samsung_v1a3g
THANKS & CREDIT​Credit to All developers that do share codes to our community and Thank to all of them and you , that makes this ROM.
Spacial Thanks to Valera1978 and ShevT for his kernel base / device prototype.
Spacial Thanks to universal5433 for device prototype.
Credit to v4afx developer viper4android
ROM DOWNLOAD / Change Logs go to Post # 2.

Download ROM Here​16/11/21 Last update (11/11/21 broke the bluetooth sco) now fixed.
Spen still random freeze and reboot.
Don't enable Touch sound , it will break sound system.
11/11/21 Working Camera, and Auto Call Recorder (if it is allowed in your area)
now preinstall ViperFx , Galaxy Store , to Data partition if it not yet install,
Spen is fixed ( I hope , Thanks to ShevT for fixed, I applied his patch so, he said no more freeze and reboot).
31/8/21 ViperFx work
Remove Viper4Android for preinstall but still include lib, you must install Viper4Android , I use this package and it work, viperfx_2.7.2.1.apk . This version you can Change , cpu governor, swappiness, mount-bind ext sd card folder to internal folder.
Spen is same issue , also the Camera.
15/6/21 update BT SCO voice calling, IR and Samsung audio.
This built, update BT SCO driver hal to enable voice call both gsm and voip. IR is working perfectly now. Audio less plop sound or XRUN less.
Replace pre-audioprocessing with android lib -> no echo on caller side when using voip now.
27/4/21 with Samsung Audio - Initial Release
Log: Initial release with Samsung Audio , which cannot use DEEP_BUFFER_PLAYBACK so sometime you will hear plop sound and absent sound.
27/4/21 with v1a Audio Hal - Initial Release
Log: Initial release with Samsung Audio , which can use DEEP_BUFFER_PLAYBACK so sometime you will hear less plop sound and absent sound. This one gives smooth sound.
TWRP for v1a3gxx is here. Use this one to flash. This update , you can easily check+fix file patition of internal storage with this command on terminal of TWRP "chfixfs".

Please how do we get access?

kaengselllley said:
Please how do we get access?
Click to expand...
Click to collapse
Sory, I forgot to open for public. Now you can access.

khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."

khomsn said:
Sory, I forgot to open for public. Now you can access.
Click to expand...
Click to collapse
thanks
I'm getting "Error executing updater binary in zip ....."

Use This TWRP

i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.

khomsn said:
Use This TWRP
Click to expand...
Click to collapse
Thank you for the help

RW168 said:
i flash Viper4Android v.2.7.2.1 using magisk, is not working, and i use transparent clock & weather, it can not detect the current location, please advise.
Thanks.
Click to expand...
Click to collapse
Magisk Latest update not compatible with Viper4Android

khomsn said:
Magisk Latest update not compatible with Viper4Android
Click to expand...
Click to collapse
when use this rom [ROM][SM-P900][UNOFFICIAL] Lineage 17.1 | Android 10 Q |, viper4android works fine. its not magisk problem..

Is it possible to remove spen feature from thr rom and prevent reboot??

mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
mvdarwin said:
Is it possible to remove spen feature from thr rom and prevent reboot??
Click to expand...
Click to collapse
don't use spen for now

Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.

RW168 said:
Hi Khomsn, thanks for the Rom, i flashed the new rom, but earphone using jack is not working, only working with tablet speaker, please advise, thanks.
Click to expand...
Click to collapse
Do you have previous backup for data partition, I had this problem before it is some error in data file that prevent audio route to function properly. So restore that partition and reinstall rom. Or rest to factory.

For Netflix , you have to download last version to sdcard an install. Play store not show and not allow to install.
But it works.

Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.

ivan.odinets said:
Hi Khomsn! First of all, thank you for the ROM and for the source codes. I have successfully build working rom using your sources.
I should notice, that for me S-Pen is working nice. First time - device indeed got frozen, and went to the reboot. But after this - no further S-Pen problems. Unfortunately, this is not working with the camera.
But, unfortunately I did not manage to get AFWall+ working. Even after adding NAT support to the kernel I am receiving errors from iptables.
Click to expand...
Click to collapse
Source code is not up to date yet. Now source code is updated.

Camera error on this
libexynosv4l2: failed to ioctl: VIDIOC_QBUF (22 - Invalid argument)
libexynosv4l2: failed to ioctl: VIDIOC_REQBUFS (-1 - Invalid argument)
buf index always 0 .

Hi Khomsn, thanks for the rom. You make our note 12.2 survive through the years
One question about some notifications didn't get in previous unofficial lineage rom. This build is signed with a public key & SElinux deactivated... should I simply turn off the notification ? or any guidelines how i can resign myself the build and activate SElinux (can i use the source code to do that) ?
thank you again and the other devs for these fantastic roms