Related
OK - I've been using the ATT store Body Glove case since I bought the Captivate, which is ok but I don't really like the stripes on the back, and it is a bit too slippery for me.
I just ordered the Seidio case because it has more of a matte finish and I liked the felt interior. So I don't know if I like it or not.
A few minutes ago I took the phone out of it's case to dust it and clean out the case when I got a call. I was surprised at how slim the phone felt without it's Body Glove case on. I liked it. But I also found it a bit slippery. ( A speaker phone call was put on the arm of the chair I was in - with the case it would hold - without it slid away)
Now I am wondering if I should just use some skateboard tape or something similar on key areas to allow me to set it down and hold it comfortably (where it won't slip) instead of using a case. I don't use a screen protector and I don't think this phone needs it.
Any comments or suggestions?
Now that I've thought about it for a few minutes - I think what I want is a rubberized battery cover. That would be the bomb.
I don't use a case on mine and I've yet to get a single scratch on the front or back - the glass is very tough. I cringe at having to use a case, losing accuracy, clarity, and brightness on the screen and having to touch through that...having it hard to slip in and out of my pocket...not looking as nice. It's like if your wife made you use a condom every time.
just "paint" it with some Elmer's Rubber Cement. Im really kidding but I'm with you I like the feel of the phone and I hate the rubber case I got it makes it a pain to get in and out of the pocket. Personally I plan on selling this phone in a couple of months so I want it in good condition.
vsboxerboy1 said:
I don't use a case on mine and I've yet to get a single scratch on the front or back - the glass is very tough. I cringe at having to use a case, losing accuracy, clarity, and brightness on the screen and having to touch through that...having it hard to slip in and out of my pocket...not looking as nice. It's like if your wife made you use a condom every time.
Click to expand...
Click to collapse
Agreed that the screen is fine on its own. But I still think the back needs some help.
Also, I do not like condoms. Neither do my wife and kids.
Ah, well I saw something a while back where someone basically took four little rubber/plastic stickers and put one on each corner of the back of the phone to lift the back up off whatever surface you set it on just a hair. I would imagine that you'd get good traction with that too - I can't seem to find the exact application of it though......
This thread is mostly me think out loud.
I believe that what I want is a rubberized battery cover.
The cover is slightly recessed - it is lower then the bottom locking section and the top section with the camera. It also wraps around the sides almost 1/2 of the way.
I think that if the battery cover were coated with a rubberized, non-slip material, it would be better. If the rubberization made the cover stick out slightly, rather than be recessed, it would allow the phone to be set on it's back and not slide away and keep the camera off the deck. Also, the wrap around side parts of the cover would help when holding the phone.
Now, can someone tell me of a place/process that might do this? (Not rubber cement but close) My pickup has a Rhino Lining coating that I love. There is a place nearby that does that work but the coating is like 1/8-1/4 inches and that is a bit to thick for the phone.
Any Ideas?
http://www.plastidip.com/home_solutions/Plasti_Dip
http://www.brownells.com/.aspx/pid=1150/Product/GUN_KOTE_trade__OVEN_CURE__GUN_FINISH
http://www.goboatingamerica.com/products/DM_article.asp?id=3645
Found these
Bought this stuff at Home Depot.
Then tested in on this beer can. I didn't clean or prep the can, just picked it up off of the floor.
This is 5 coats. It is still thin. Dries fast and feels just about how I'd like it to. Not tacky - sort of a hard rubber feel. It is flexible, the can bends and the stuff stays with it.
It can be scratched, you may be able to see a scratch I made with my nail. It didn't go all the way through to the can though - and I had to scratch hard. It looks like it would be easy to spray another coat over any scuffs.
I plan to do the back of the battery cover - thick enough to make it a bit taller than the top and bottom sections of the phone. The way it is going it seem like that may take 15+ coats. I'll keep testing.
Two things about that though, the battery cover is used not only as the speaker output but the battery cover itself also dissipates a good amount of the heat that the phone generates. You probably want to be a more careful than usual in designing something that is going to smother this part of the phone.
not sure how much you're looking to spend but I put the Zagg total protection on mine. You get full protection on your phone but you can't see it, so you still get the sleek look and it's still very thin as well. The clear plastic is also great for gripping, I can set it on the dash of my car and drive normally and it won't budge.
I've had good luck with bestskinsever.com
Used it on my Nexus One and the fit was good, buddy got one for his vibrant and the fit is good as well.
journeyman82 said:
not sure how much you're looking to spend but I put the Zagg total protection on mine. You get full protection on your phone but you can't see it, so you still get the sleek look and it's still very thin as well. The clear plastic is also great for gripping, I can set it on the dash of my car and drive normally and it won't budge.
Click to expand...
Click to collapse
Looks interesting. I wish they had the leather skin for the captivate. I would be all over that. In fact I may need to take a trip to the fabric store to see what they have.
Thanks.
Ok to finish up my saga...
I liked the faux leather on the cover mentioned in the post above so I went to the fabric store and ended up with some black, I believe they call it marbled vinyl. It looked and felt similar to the back of a blackberry I once held.
I tested it on my trusty Busch Light can with some 3M spray adhesive and it seemed to hold fairly well.
So I went for it. I taped off the inside and the prongs of the battery cover. Sprayed glue on the cover and the back of a piece of vinyl cut too big. Stuck it on and smoothed it out. I sat the cover on a bag of rice and and put a bag of brown sugar on top (to push around the curves) and topped it off with a gallon jug of tile grout.
Waited an hour, probably longer than needed, and used a pointy x-acto knife to trim off the excess. I had also put a piece of tape over the speaker holes so I cut that back open to. The underside of the vinyl has a white background so once it was trimmed to fit I went around the edges with a fine tipped sharpie, which blended well.
Overall I like it. It is just a bit thinker that the top and bottom bands, so if you lay her on her back those parts don't touch a flat table. It has a leathery, grippy feel without being tacky, which is what I was going for. I do already miss the front edge lip that the Body Golve provided but it is also almost it;s original thickness.
Pics below. (Sorry about the crappy last pic. I had the phone with new back all set up on a white surface, ready for it's glamor shot, when I realized that the phone is my camera)
Staplebox: great job!
Wow that is a nice, careful job.....
staplebox said:
Ok to finish up my saga...
I liked the faux leather on the cover mentioned in the post above so I went to the fabric store and ended up with some black, I believe they call it marbled vinyl. It looked and felt similar to the back of a blackberry I once held.
I tested it on my trusty Busch Light can with some 3M spray adhesive and it seemed to hold fairly well.
So I went for it. I taped off the inside and the prongs of the battery cover. Sprayed glue on the cover and the back of a piece of vinyl cut too big. Stuck it on and smoothed it out. I sat the cover on a bag of rice and and put a bag of brown sugar on top (to push around the curves) and topped it off with a gallon jug of tile grout.
Waited an hour, probably longer than needed, and used a pointy x-acto knife to trim off the excess. I had also put a piece of tape over the speaker holes so I cut that back open to. The underside of the vinyl has a white background so once it was trimmed to fit I went around the edges with a fine tipped sharpie, which blended well.
Overall I like it. It is just a bit thinker that the top and bottom bands, so if you lay her on her back those parts don't touch a flat table. It has a leathery, grippy feel without being tacky, which is what I was going for. I do already miss the front edge lip that the Body Golve provided but it is also almost it;s original thickness.
Pics below. (Sorry about the crappy last pic. I had the phone with new back all set up on a white surface, ready for it's glamor shot, when I realized that the phone is my camera)
Click to expand...
Click to collapse
love it, im stealing that!
Go for it. Usually I prefer to buy a second of whatever I am defacing before I deface it but I didn't find any battery covers online. I also didn't look to hard.
It is still on and I still like it. The only thing I don't like too much are the sides. I completely covered the back, right up to the side edges. It is a perfect thickness on the back but feels too thick on the sides. I wish I could have found a thinner material that I could have built up on the back and tapered to one layer on the sides. I really wanted grippyness on the sides so, oh well, it's good enough.
I'm still on the look out for a better spray on rubber. I'll update if I find anything good.
Hopefully someone will start making aftermarket battery covers with some options.
Thanks and good luck,.
Second the stealing. Awesome idea and writeup. Thanks for sharing.
From a phone on an app
I scrapped the vinyl. The edges were just bugging me to much. I still think a thinner material would work well though.
I cleaned up the cover - looked fine again with all the glue off of it.
I went back to the rubber spray. I've got about 8 coats on in the attached pic. Need to wait about 30 min in between coats. I'll keep going until I go to sleep, let it dry overnight - and test it out tomorrow.
ETA - put it on the phone the today. Love it. Doesn't add any bulk and provides a grippyness to the back and sides. I'll find out how durable it is.
Hey guys, i was wondering if any of you put tape on the chrome bezel before putting on cases to prevent scratches. I tried this before and it seemed to work good, but i've never seen it being mentioned in any threads.
Another reason I'm asking is because I'm thinking of ordering a hybrid case (from this thread: T-Mobile Galaxy S2 T989 Hybrid case - $8! GREAT!!)that's supposedly somewhat of a loose fit. I was planning on putting double sided tape on the bezel to make the silicone part stick right onto the bezel to fix that problem.
Any thoughts/opinions would be appreciated!
Thanks guys!
Putting tape on the bezel is a good idea to prevent scratches, however, there's a chance of the adhesive becoming lose over time (especially with the warmth coming from the hand). Thus, it would also leave that sticky tape residue.
I haven't tried the case you have mentioned, but I think putting double sided tape isn't necessary. Tape will be a decent temporary fix, however, I don't think it will be strong enough to have the silicone stay in place (especially if the adhesive gets warm and loosens up as mentioned before). The case should be fine even without the tape, but you won't lose much from trying.
If you are really set on getting that case and you are looking for something that would prevent scratches on the bezel. Another alternative to tape I would recommend is this body skin. Bestskinsever is currently having a sale, just recently ordered one for myself. It will have a better aesthetic on the phone and at least not leave any adhesive residue.
Hope my feedback helps
I have the case. Its not really a loose fit because the hard part of the case holds the softer, rubber part of it into place, and its not really needed.
Rearth Discover Wallet Case Review
Im a little surprised that no one has done a review of this product for the Nexus 5 yet but its hard to plop down a good chunk of change for a phone case especially if the point of getting said phone was because it is a bargain. I usually don't buy cases which cover the phone completely with a flap (wallet style) but I really love my Nexus 5 and this case looked like the best I could find and at around 50 bucks I hoped for the best...
The Box
Sorry no pictures of this because I opened it in an unboxing video and didn't think to take pictures of it. The box was very flimsy, almost looked as if it was damaged. The plastic window showcasing the phone had been pushed in creating a hole which you could stick your fingers into. That didn't really bother me much as long as the contents weren't damaged.
There were a few items in the box:
-The case
-Little card explaining the features of the case
-Screen protector and screen protector accessories (I didnt use any of these because I have a Spigen screen protector on my Nexus 5 already)
The case was held in place inside the box by a thin piece of cardboard with a weird paper strap which had adhesive on the very and which was stuck to the phone case. Peeling off the piece of paper with adhesive on it left a mark which I first thought was just stuck adhesive (Turns out this actually damaged the leather leaving marks)
The Case
The case felt very nice to the touch as it is real leather, It made my phone look like a little book. This case obviously adds a lot of bulk but its meant to replace your wallet in addition to protecting your phone.
Front of the case
Back of the case, notice the damage to the leather? Cutouts are fine with the exception of a little piece of plastic left over from the molding process with by the camera hole at 11 o'clock.
Great stitching and some branding.
Branding on the rib.
Inside the case, four pockets, some subtle branding.
How the phone is held in, some branding, Ringke Fusion case with a leather cover. All holes are nicely cut out and all buttons are covered and responsive.
The Conclusion
In conclusion it's a flawed beauty, it is so close to being perfect for me. I think this is a great start for Rearth, they usually make much cheaper products, but for the cost I don't think the adhesive should've left a mark like that (I feel its not acceptable), I think they should at least remove the "Ringke Fusion" on the case and it's missing one key feature that turns me off, there is no wake function for this case.
I will be contacting Rearth to see if I can get a replacement or if they will be updating this case at least with a sleep wake function.
Thanks for reading/watching guys!
Hi
I bought a oneplus one about 3 months ago and I absolutely love it however I dropped it a while ago and everything is fine but the frame area to the left of the charging port is completely jacked up :/ chunks of it are missing too...
I'm currently using the oneplus flip cover however it doesn't cover it up, so my question is: is there any light tpu/hard shell case that covers up the entire silver bezel, or at least the bottom of the phone so I don't have to look at this anymore xD. All cases I've seen so far leave a bit of the bottom frame exposed just enough so you can see the damage :'(
Anyone know any case that can cover it up?
Thanks!
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Guess it all depends on what kind of protection you want. If you just want mild protection and to just cover the sides, then go with the tpu case. If you want heavy protection, I would suggest the Tudia Omnix Hybrid, http://www.amazon.com/TUDIA-Full-body-Protective-Protector-Resistant/dp/B00SO4XYHA . I have the Tudia case and it has taken a beating and protected the phone very well, even from some pretty high falls. Only con about the Tudia case, is that the front covers the sides of the screen a bit and prevents touch at the the very edges of screen. This can be a bit bothersome if using apps in full screen/landscape when you have to swipe down to exit full screen.
noahvt said:
Hi
Anyone know any case that can cover it up?
Thanks!
Click to expand...
Click to collapse
kenboyles72 said:
I would suggest the Tudia Omnix Hybrid
Click to expand...
Click to collapse
I too have a Tudia--Slim-fit Cygen.
thanks
thanks
Bino92 said:
I advise you to look for the "Diztronic" TPU case, covers completely the silver frame, following the contour of the screen. There's just a 1 cm spot where the frame is visible, at the bottom of the cover, near the hole for the USB cable, but in normal use is not visible. It's 6 months that I'm using this cover in combination with a tempered glass and I'm really satisfied.
Click to expand...
Click to collapse
I totally agree, couldn't have said it better. Here are some visuals for you. I got the Diztronic case when I bought the phone, it has protected it from falling out a car, off the desk, and off a moderately high shelf. You can get a tempered glass screen protector off eBay, have to search a bit (TechArmor don't have one). I got one from user dreamlight2004 for around 5 dollars. I made the mistake of getting the OPO screen protector when i first got my phone and it went bad a month ago, a hard scratch from a key. Tempered glass protector looks so much better. Just loaded COS13, it should keep me busy until the OP3 gets announced - so far it's looking to be a really good phone (boo on the OP2 and OPX)
Case view
Phone view
I agree, Diztronic bumpers are terrific.
I'm using this one http://www.ebay.com/itm/Rearth-Case-OnePlus-One-Folie-Ringke-Fusion-Schutzhulle-Cover-Tasche-klar-/121715293296?hash=item1c56cbfc70:g:gAUAAOSwT6pVt5tV And it is awesome. You can also print your designs for this case!
Ringke Fusion for me is great. It covers the OPO completly.
DO NOT BUY THE TUDIA CASE.
I bought it because I thought it looked pretty sweet. It's the worst case I have ever owned, and I have owned a few. Half the case is slippery nonsense plastic. You grab your phone "wrong" (by this I do not mean insecurely, but simply you happen to not have your fingers on enough of the case's rubber outline), it's like holding an eel.
The clips covering the audio jack and usb port are an absolute NIGHTMARE to open, and plugging in your charger for the night would realistically take three hands with 17 fingers each to manage in a reasonable timeframe. Good thing my audio jack's clip, after having been used exactly twice without even the slightest bit of the abuse it deserved, now no longer clips into it's crevice, and is permanently hanging out at a 30 degree angle. The pop-out clip on the back is nail ruining torture to get out, as is the rubber outline holding the front of the case, should you want to get this garbage off to see how far you can launch it through the air in rage.
I wouldn't use this piece of junk if they paid me.
I am using the TUDIA Dual-Layer case+a glass screen protector, which turned my One to a tank
I drop it way too often, but it still works flawlessly, so I can recommend this case. It also coverers the aluminum frame
I can rep the Poetic Case found here:
I took out the screen protector but I have been rocking the case for more than a year. It is kinda bulky but I have no worries about dropping it or tossing my phone on my desk. Also, It is kinda water resistant (with the screen protector). I have dropped like a glass of water on it and quickly cleaned it up with no harm
Wanted to share with you all, a really good case that is worth the money for this phone, and I am really happy with it.
The case is intended to put on and leave on, hence the adhesive films on the inside of the front cover, the back (with yellow cushioning) just clips on with a strong solid tight fit. The front cover bezel/lip looks to be about 2.5-3mm deep, but accessing the right side soft menu still good. My finger size is about average/medium size and I have no problem also accessing the power button and fingerprint sensor on the side beside the s-pen.
Used the glue adhesives on the front screen that were already applied, just had to pull off the backings (They also included an extra set of glue adhesive strips for a second mount if you ever need to take off and put back on) and it fits perfect, lines up with all the holes and speaker grills. The back piece with the hinge cover (with 2 spring loaded hinges), protects the back and fold hinge while the lip around the camera protects the camera lenses. It too also has perfect alignment with holes and has lots of clearance with the USB C port fitting. The hinge cover protector also gives you something to hold/grip when the phone is unfolded.
Suggest you first get a front glass screen protector (I used the Spigen Glastr Ez Fit for perfect alignment and easy application) for the front and camera lenses protectors also before applying this case.
This quality case feels very good, smooth, solid, elegant, and provides a great grippy feel. More importantly, I feel more confident holding the phone with this case on, as it feels like it could weather some accidental mishaps and protect the phone.
In my pictures, you will notice I also put a pop socket on the back centre for four reasons:
1) use for general holding in hand, even more support than the hinge cover protection bump when fully open
2) use as a kick stand for front screen and/or the unfolded full screen
3) use for a magnetic mount that I have in my car - so phone can sit in folded vertical or horizontal orientation and also unfolded orientation, using a pop socket flat mount with the metal plate stuck on the back of it- I just slide my pop socket into the pop socket flat mount holder and then attach to the magnetic mount, which also allows me to:
4) wireless charge at home, by twisting the top half of the pop socket half a turn to remove, when it is pushed in, which will allow a closer clearance for wireless charging through the case as it is all plastic
One critical point based on the design of the spring loaded hinge cover protector, when you do unfold/open the phone to full screen, and you are using the back screen for taking a selfie, you loose about 1 cm of view area on the left of the front screen. This minor con is something I can live with as this is in only this situation and for the design, it is a great compromise having that hinge protection.
In closing, I am really happy I got this case. I was originally worried that it might be too bulky, eventually ending up removing it for a thinner/smaller case, but I think it has a great balance of protection, holds the s-pen on the front side of screen keeping it's thickness down (compared to the Samsung pen/kickstand case, or others in some cases), and one of the few cases that protects the hinge, allowing the phone full protection around the whole phone. Hopefully you found this helpful for your situation.
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
I read a lot about people having a challenge to pull the case cover off on the Z fold 3, some had glued the back on also which the current 4 version doesn't have or need, as it snaps on pretty good, but some with the 3 did use the glue strips which made it a challenge to get off. I can't speak to this Z fold 4 vs the 3 case, but having used it a couple of days, I still think it is a solid quality case.
It is a "little" thicker than the Samsung pen case, but not by much, and the pen holder on the Spigen sits in a nice place compared to the Samsung making it thinner right away, even with the hinge on the back when opened up. I understand why they need the glue adhesive on the front protection cover, as it needs to stay locked on especially when you are pulling on the s-pen constantly. What I really like is that it does protect the Fold's hinge area also... the Latercase is super thin, so less protection and the hinge is susceptible when folded with mishaps and for me I use both the front and the inside about the same. I can't see me taking the front cover off for a long time and don't think I will need to clean from the inside on the front panel as the fit is super tight, but the back can be snapped off easily if necessary. There are a lot of people that have used the Latercase as it is thin and has good grip, but doesn't have the "bunker" safety. As I mentioned in my closing casual review, I was afraid the size of the case would be too much for the protection it offers, but it is a lot better than I thought it would be in terms of weight/thickness and with the hinge protection and great pen storage location, I am very happy with it.
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
eswar539 said:
used to have slim armour pro on my fold 3. i thought same as you and glued the front and back to the phone. i didnt removed for 2 months as theres was no need but after 2 months i wanted to clean the phone as dust clogged in corners, dam that case bonded with phone like a rock. no matter how much i pulled it wont come off lmao. i had to use some 70% alcohol and slowly pried it off. there were several scraches on the front screen border where the case was contacting the phone. also its weighs so much, i dont know why they named it as slim as it aint slim at all. but i have to say that case is like BUNKER and protected my phone from several hard falls
this time thinking of going with latercase as i rarely fold my phone unless im going outside.
Click to expand...
Click to collapse
Had the same issue with mine. Damaged and scratched my z fold 3 due to the case adhesive.
Tried to go another route for my fold 4 and got the vrs terra guard modern case, It looked alright & initially I was happy as it had Good Protection. It felt more plasticy than the spigen version but i liked the design so ignored the finish.
Over my 4 days of use I found that the magnets in the hinge created big dead spots in the inner screen where the S-Pen wouldn't register.
Screen protector included is much smaller than the active screen area. (So basically useless)
The hinge created a weird noise while opening and closing which i ignored and it eventually broke after 4 days of use (the hinge created tension in the plastic holding it and lifted the inner base of the case and broke).
Thankfully no damage to the phone.
I'll probably try the iblason or supcase I saw on some youtube channels they looked solid and only had one small piece of adhesive tape for the top cover.
Syd91 said:
Screen protector included is much smaller than the active screen area. (So basically useless)
Click to expand...
Click to collapse
Spigen screen protector for the outer small screen is very good. Although its not edge to edge which will hinder with cases.
_GRIZZLY_ said:
I recommend stick for example transprant tape for hinge to protect before scratches from this case. Every unfold and fold device i saw more scratches on the tape and thanks for it no on the hinge
I did it on my fold 2 from first days and now look like new.
Click to expand...
Click to collapse
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
jonstatt said:
So far, I don't see anyone has managed this on a fold 4! The hinge film gets pushed off when you open the phone as the tolerances are much tighter than the 2 and 3
Click to expand...
Click to collapse
Interesting, so in this case scratches problem can be unfortunetly hard to resolve.
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
For its price, its terribly expensive. There are cases just like it for 30% less money that use magnets on the hinge instead of glue, and the material feels better. I feel as though Spigen rips people off and they must have massive profit margins if you see the cases that show up on amazon and aliexpress.
What case do you recommend then?
Q-Prof said:
After over a month with the Spigen Slim Armor Pro Pen Edition case, it is holding up great. Haven't had any close ones or miss-haps to talk about, and the under the hinge protector, minor dust, which is cleaned out easily with a clean micro-fibre. The case gives me the confidence that it has that 100% protection. Very well designed with upgrades to it since the first one they offered for earlier folds, I have to say this is their best design yet. Everything just works well, the case, the EZ glass front protector, the pen holder, the camera lens cover protection, the removable pop socket with the metal stick on that works with my car magnetic mount and the ESR phone boost kickstand. As for the fold 4 itself, no issues and works well with the Watch 5 pro and Buds 2 pro. The only one thing I wish it did have is a wider front screen similar to the Mix 2/Vivo Fold, but with all the pro's, in Canada, it is the clear winner for Folds here.
Click to expand...
Click to collapse
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
elio321 said:
Just got my Z FOLD 4 a couple of days ago..(used to have orginal Z FOLD.....then Xiaomi Mi MIx FOLD..now this beast..it is awesome!)....I have the Samsung case with pen holder...but interested in this Spigen one you recommend..you say it allows wireless charging with the case on ? (the Samsung one does not.....)...and looks like it gives easier access to the S pen too...but does the S pen not block the fingerprint reader ? It is kinda damm expensive too for a case ...let's hope it comes down in price in Amazon prime sale next week !
Click to expand...
Click to collapse
Hey Elio,
Congrats on getting the Z Fold 4,
No issues with the finger print reader, I have average sized hands and thumb works all the time, there is enough room. Yes it is expensive, but well worth it, you wont feel ripped off as it is excellent quality, and there is no other design out there that has this unique set of design features. The case feels really good in the hand (not plastic feel... more of a smooth rubbery feel, so great grip) and it fits like a glove on the case. As for charging wirelessly, no problem... I even have a removable pop socket and an ESR phone boost kickstand, and still no problem charging after I remove the top of the pop socket (just a quick 1/2 twist when it is pushed in). Not only easier access to the pen, but better placement in my opinion, I would rather have a little wider than making it thicker... it already is thick because of the fold design... so why put a storage s-pen on the back... and putting it in the hinge protector like some designs makes the hinge protector a huge bump on the back when open.
I have very negative experience with the Spigen cover cases for Fold 4. The first one, the Tough Armor got broken after 16 days. The second one, the Slim Armor Pro got broken today after 4 months. Totally, I lost almost 150€ for these two cases ;-( I will request replacement. My conclusion is there is no way to make a good unbreakable cover case for Fold 4. For my previous non-foldable phones the Spigen cover cases where perfect.