Related
Hi guys, I am not new to android, I daily flash my Samsung Nexus via CWM all the time.
However, My dad recently went to india and i believe got his phone unlocked their for Indian sim cards to work.
Now if they flashed a indian rom on the phone as well, How do i flash the native BELL rom? also, How do i unlock this?
I read around one has to download multiloader and find the Bell Flash file, or whatever the stock one is that Bell gives out in Canada.
Can anyone help me with this? I'm new to this area of XDA. Basically I need a Bell stock flash file, and need to network lock his sim card back to Bell again.
Cheers
Ok So from reading around it seems like I should do the following:
-Download Multiloader--- Done
- Download Bell Software from SAMFIRMARE, Im downloading the Firmwares for GT-S8500M - Canada (Bell)? is that right one?
- Follow http://forum.xda-developers.com/showthread.php?t=1759424 guide to flash my firmware,
and then I should have my dads phone back and on the Bell network right in Canada?
Please give more details so that it is easier to understand you and offer solution.
If I guess right, your dad's phone is Samsung WAVE 8500? And that the phone is completely unlocked now?
If the answer is affirmative, then there is no need to lock it back again to Bell Network. An unlocked phone can be used with any SIM card.
And as the phone was originally of BELL network, just go to Sammobile and download the Canadian firmware for S8500 (WAVE).
Flash your phone with the downloaded firmware and start using it. You don't have to LOCK for it to work with BELL.
The above is only if your dad's phone is WAVE and originally of BELL network. If not, please give more details.
Hey thanks spacks. It was originally from Bell. So if it was flashed to some firmware for india, I will just flash it back to the Bell firmware.
Right now its locked to his India cell phone carrier, So i should probably flash the bell rom to put him back on his original network.
If i run into problems I will post back here, as I am leaving for work now
Edit** If the phone is just locked to the indian carrier, How can i UNLOCK it without flashing a new firmware??
Please read this thread : http://forum.xda-developers.com/showthread.php?t=1473089
Best Regards
Ok i tried the first step to flash the boot files BUT now running into a issue, the laptop wont detect the samsung phone anymore, I tried reinstalling and updating drivers and uninstalling them, Can anyone help me? The phone boots up to the "Samsung Wave I8500M" logo screen but freezes...I really need to flash this Bell firmware asap.
Ooooops
This is not going well as expected :S
Go to SamMobile and download the canadian fw available there and flash it
Then try again with the flock to unlock your phone
Best Regards
Edit : here is the file you are seeking : http://hotfile.com/dl/153842100/e332000/S8500MUGJF5_S8500MBMCJF5_BMC.zip.html
mylove90 said:
Ooooops
This is not going well as expected :S
Go to SamMobile and download the canadian fw available there and flash it
Then try again with the flock to unlock your phone
Best Regards
Edit : here is the file you are seeking : http://hotfile.com/dl/153842100/e332000/S8500MUGJF5_S8500MBMCJF5_BMC.zip.html
Click to expand...
Click to collapse
Hey it's okay! I fixed it the driver was somehow corrupt, so I downloaded Samsung kies, everything is fixed. Flashed the Canadian firmware last night.
However, is there any way to get BADA 2.0 on the Canadian wave?? Any flash files? I can't find anything.....I hate when they delay updates!
Sent from my Nexus S
If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?
batillojr said:
If you have S6 from Tmobile unlocked with metropcs , can you please post a screenshot of "abour device" ?
Click to expand...
Click to collapse
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?
digisolnc said:
hey, I have an S6 128GB originally TMobile, flashed the Metro ROM and its now unlocked. What do you want to see in particular in About Device?
Click to expand...
Click to collapse
i wanted to see if the baseband changed from tmobile to a metropcs baseband
batillojr said:
i wanted to see if the baseband changed from tmobile to a metropcs baseband
Click to expand...
Click to collapse
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.
digisolnc said:
Baseband with the Metro ROM is G920T1UVU1AOCH, but the problem is, I flashed both of the S6's I have here to the Metro ROM to unlock them so I have no idea what the original baseband was lol I hope you do!
Any luck on the S6 Edge unlock? I scour the internet everyday for developments but I havent seen anything I feel like this S6 Edge I have is either going to sit here forever or Ill have to sell it as a blacklisted phone because its financed and I KNOW its going to get blocked.
Click to expand...
Click to collapse
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.
batillojr said:
the fact that baseband has a G920T1 means that it did changed the radio , while every damn firmware i tried never change the baseband ., is good to know though ... and if you have an S6 Edge try this before selling it .. ask to borrow someone's tmobile sim card and try to at least do a temporary unlock if that doesn't work then download the app VyprVPN select germany (i did) with the tmobile sim still in and try temporary unlock again,,, doing this at least it bought a month's use of my phone , maybe a solution will come up later on.
Click to expand...
Click to collapse
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/
digisolnc said:
So youre saying that when you flash the Metro ROM to it, its not changing your baseband? I used the one posted by UnlockBase. Were you able to successfully unlock yours?
And yeah, Ive tried the TEMP and PERM unlock on the S6 Edge. I put my TMobile dealer SIM in it hoping that would help as its a free $80 monthly demo line I get for selling TMobile service. I would gladly try that method, but since we sell these phones, a TEMP unlock wont help me I need a permanent solution so once I sell it, Ill know the customer wont have any issues down the road. I have both of the S6's up for sale now that they are unlocked, but I have always wondered if Samsung REGION LOCKS these phones. Ive tested my personal ATT line in it, and it works great, but alot of my customers on eBay export these phones overseas, so Im hoping these new Samsungs arent region locked :/
Click to expand...
Click to collapse
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I gotcha. I did something similar. I flashed the international ROM on the S6 EDGE via TWRP and it told me the code is incorrect. I know the code is correct because if I ever it in with no SIM and the #7465625*638*# and put the code in it says successfull. This is SOOOOOO frustrating. The lock has to do with the radio or the bootloader/baseband.
batillojr said:
when you try to flash any firmware with odin it ends on FAIL.. you can flash rom with twrp but baseband remains the same ,, so i dont know if the unlock app from tmobile is tied in the bootloader or radio or something else ... so far i'll just enjoy the 30days left and see what happens after that ... cause after it accepted my att sim card a message will appear reminding me the unlock was to end on Jul01 and if i wanna to do permanent unlock, so i flash a firmware from a canada version G925W so the reminder went away but i dont know if that means that in 30 days i'll be locked again
Click to expand...
Click to collapse
I am interested to see if that works which it may as the app is not there to retrigger the lock. You never know.
I currently have metro pcs and I bout an unlocked Samsung galaxy s6. My original Sim is too big so I have to go to metro to get a new one but the phone is not reading the new sim in order for them to program it. How do I fix this or get around this? Should I not let metro try to activate the phone?
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
toronado13 said:
I was able to flash the ATT rom onto my Verizon S9. I got a VZ s9 from work but I'm on ATT. For the most part it's worked great, I had done the same thing previously with a Galaxy S7. I say for the most part b/c I am on here tonight to post a question myself about the fact that I'm getting a delay with MMS messages. I imagine it has something to do with the APNs I have setup, but I can't seem to figure it out.
Click to expand...
Click to collapse
Did you have to flash to the U1 software first?
I do think that is what I ended up doing... tried to go directly first and it kept failing. Got fed up and decided to just try and put the bone stock rom on it, and that went on really easily.... so after using it like that a few days I tried to drop the ATT rom on it and it worked without issue.
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
Yes, but you need to go to the u1 firmware 1st then to the other carrier firmware. Also make sure you avoid the newer firmwares with the new bootloader, as the unlocked model and certain carrier models don't have the new bootloader.
*Detection* said:
No, bootloaders are different, with the S7 there was an unbranded U firmware that was compatible with most of them, unlocked firmware will be that one for the S9, but no you cannot just flash different device firmwares to the wrong model
Click to expand...
Click to collapse
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
elliwigy said:
lolol
yes u can.. u can flash between U and U1 firmwares no problem..
normally ud b correct tho but since s8/s8+ it has been ok.. just cant flash 9600 or 9650 to a U or U1 device
Click to expand...
Click to collapse
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
*Detection* said:
That'll be why I still thought that then, coming straight from the S7 > S9
Had many members flashing the wrong firmwares thinking they could do that and bricking their S7s / wondering why ODIN failed
Click to expand...
Click to collapse
I tried downloading vzw firmware G960USQS3ARI6 to my unlocked sprint s9 and still not vzw flashed. want to do this so can have voice over LTE. Any other steps im missing? flash went through but still sprint
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA. ?
HAPPY FLASHING!
nickosarus2008 said:
As soon as Firmware ver. 3 came out for the G960U1, I was able to flash it to my Sprint G960U and finally have VoLTE, WiFi calling and stable LTE for MetroPCS. Used samkey to unlock it from Sprint. My phone is actually performing much faster without all of Sprint's bloatware hogging my RAM and storage space. I can confirm that OTA updates still work the same...I received September's security patch (current) with no problems. Device is still official status and Knox hasn't been tripped.
A lot of people think you can just flash the carrier firmware of your choice and boom, it works...I had the same thought process....that's not the case. You have to make sure that there is a matching firmware version for the carrier you want to flash to, as well as make sure the G960U1 firmware version (the unlocked version of the S9's software you have to flash first before even carrier flashing) is the same version of what is installed on your phone now. It's easy ya'll......just READ lol.
I'm in love with my phone again thanks to XDA.
HAPPY FLASHING!
Click to expand...
Click to collapse
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Curtis2018 said:
Hi, I got one unlocked G960U1(G960U1UES3ARI1) and downloaded new fireware(G960U1UES3ARI1-SPR) from sammobile, but after flashed SPR ROM successfully, the info on the phone still shows XAA, anything I missed here? Thanks!
Click to expand...
Click to collapse
Well first off, you have the unlocked phone. I don't. My G960U is originally from Sprint, so I'm not sure about carrier flashing regarding the G960U1. I thought it was supposed to provision itself after you put the sim in, and the associated carrier apps will download since it's the unlocked model...but I may be wrong...
SEALBoy said:
I've read that the Galaxy S9 hardware is identical for all carriers in the USA.
If I bought a factory unlocked Galaxy S9 can I flash it to the carrier I am using (Verizon, Sprint, T-Mobile, AT&T) to enable carrier specific software and features? Can I flash it back to the unlocked firmware?
I already see a thread about flashing the unlocked firmware to carrier models so I am assuming there are no issues there.
Can one carrier model be flashed to another carrier model?
Click to expand...
Click to collapse
I know so many people have already answered your question from some saying No to others saying Yes but you need to Install U1 first and Bla Bla Bla.
I want to give you one specific answer: With S9 you can any Carriers firmware you wish or even Unlocked phone's firmware. You will never have any issue. And you don't ever need to flash U1 or something else before changing carrier firmware you can Flash from ATT S9 firmware to VZW S9 firmware without any issue. You can also flash from U to U1 which is from Carrier specific to Unbranded/Unlocked but only hiccup is original Odin will give you SHA-256 error, which is normal because you are flashing U1 firm to U device or vice versa. This error can easily be resolved by used Patched odin that disabled SHA-256 check. And trust me you will never have any issue.
You will never want to do this but I have gone as far as mix-matching U and U1 firmware together as well. Like flashing AP, BL and CP of U device but flashing CSC of U1 device. and it still works.
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
---------- Post added at 03:08 AM ---------- Previous post was at 02:57 AM ----------
ret4425 said:
hey there, a little late to the party, having trouble with going from a Verizon to a Sprint, even by way of U1. I can't get any of them to work. And I've been told I have to go from VZW to U1 before I went to Sprint. Is that not the case? I'm having a hell of a time getting anything to flash, everything fails.
Click to expand...
Click to collapse
well, I tried to load the Sprint image from the VZW, no dice. It said it passed, but upon reboot loaded up the old Big Red (even with the Sprint SIM in it).
Anyone have any ideas? This is driving me insane....
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
ackaite said:
I have a att note 10+ that I sim unlocked it will take a Verizon sim and work 100% but it will not work with straight talk i have no service can't call text and no data every once in awhile a text will get thru but can anyone help me with this I can't root because I can't oem unlock unless there is another way any help would be appreciated
Click to expand...
Click to collapse
Did you set the APN information correctly?
Also are you using the N975U1 firmware or the standard AT&T firmware?
Are you using the BYOD sim card from straight talk?
What have you done over the phone with Straight Talk as far as troubleshooting? - this one can be important. If the phone isn't working with straight talk only it maybe a configuration (apn setting) or provisioning issue.
Are you sure the device is compatible with the area or region your in?
What provider/tower (Verizon, AT&T, etc.) does straight talk have you going through?
More information on what you have done to setup the phone for straight talk, troubleshooting steps you have taken, what information straight talk may have provided (etc. etc.) will help others be able to help you. Providing little or no details makes it rather hard to offer any help.
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
ackaite said:
The apn won't let me put dun in the type I sim unlocked it with a puk code and got strighttalk byop I tried flashing the U1 firmware to it wouldn't take it so I did a Verizon firmware thinking that might help and same thing with the striaght talk it doesn't wanna work i put a Verizon sim in it and it works just like it did on ATT so I'm confused as to why the straight talk sim won't work they can't figure it out on their end either
Click to expand...
Click to collapse
Straight Talk uses different mobile providers to offer service different areas.. They utilize Verizon, AT&T, Sprint and T-Mobile (Sprint and T-Mobile have merged recently, but Sprint towers are still active).
I have seen posts across the internet that indicate you should be using the U1 firmware on the phone.. I would make sure your converting the phone to the U1 firmware properly.
If I recall correctly (this is how I did it previously) when flashing the U1 firmware make sure your doing it without the sim card installed and using the non home_csc file. Factory data reset the phone after you successfully flash the U1 firmware and then insert the sim card after setting the phone back up (so it can apply the new sim/network settings).
I would strongly suggest you do not restore a backup during initial setup when you do this. If you restore a backup it may restore previous network settings/configurations that were for what you had previously.
If flashing U1 firmware doesn't help (and since this this is a Straight Talk specific issue) then it's more then likely on the end of Straight Talk. I would call them and make sure that your sim card is the correct one for the cell towers they have you going through and the phone you have. Using an incompatible sim card (or one that is faulty) can cause issues like this. You can also have them send you another sim card to try.
Also contact them to make sure the service is properly provisioned and activated on your phone. Double check the APN with them, and see if they have an alternative one to try. It is also possible that a service outage maybe (or issue with Straight Talk internally) in your area, so I would call them to make sure that neither are not the case here.
ackaite said:
I factory reset the phone reset network settings did just about everything I could with the phone besides it being funny about the apn cuz it says apn cannot be changed on this device if you put dun in the apn type i dunno the only thing I notice is when the Verizon sim card is in the phone the network mode is set to global whereas with the striaght talk its LTE/CDMA and it won't let you change it to global
Click to expand...
Click to collapse
The Global setting doesn't really matter in this case and your phone will be set to use the towers that Straight Talk has you going through.
The only thing that I can think of that would be a problem with network mode is if your sim card from straight talk is meant for a different provider then the towers they use in your area (i.e. sim card is for AT&T but the provider they have for the area is Sprint).
the straight Talk sim works in other phones no problem a s8 and a older note im thinking att has something in the software to block other apns i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
ackaite said:
the straight Talk sim works in other phones no problem a s8 and a older note
Click to expand...
Click to collapse
I would not use older phones as a means to say the sim card is good. Besides that's irrelevant to what is going on with the Note 10+
ackaite said:
im thinking att has something in the software to block other apns
Click to expand...
Click to collapse
Then this means one of two things... Either you didn't get the phone unlocked or else you did not convert to another carrier (or the U1 firmware XAA region) correctly.
If your using the unlocked firmware (U1 XAA region) then you should be able to edit the APN. If not then you should be able to create one.
ackaite said:
i dunno i unlocked it with a PUK code and flashed verizon firmware on it thinking i could get passed it but the verizon sim works 100% and the att sim works 100% too but a straighttalk sim card (verizon) towers the phone tries it shows 4g and disappears and then it shows it has service but cant call it just says emergency calls only
Click to expand...
Click to collapse
That sounds like either the sim card isn't good, the phone was not activated/provisioned properly in there systems (call them and double check IMEI and model information), the phone is not compatible with the service they offer in your area (I suggest using the XAA region U1 firmware in this case) or else your phone is not fully unlocked.
I would also suggest google searching or else asking them for any updated or alternative APN's to try. It maybe very likely the one you have is not suitable for the phone/area... It wouldn't be the first time I have had an issue similar to this like this.
I am opt to believe the first 3 are the most likely scenarios since the phone works on Verzion with the sim card per your indication.
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
ackaite said:
Yeah and the only reason I tried the older phone is to see if the sim card is activate with the number and the phone itself pulled the apn from network
Click to expand...
Click to collapse
From personal experience I would advise in the future you don't do that. When you activate the phone you should activate the one you are using and definitely do not use an older phone to activate a newer phone. I have had many problems with this in the past as provisioning for an older phone didn't always work for my newer ones..
ackaite said:
when I tried to flash to U1 the phone gave me a error but it took the Verizon firmware for the 975U but its still not working do you know of a good link for the firmware your talking about so I can try that
Click to expand...
Click to collapse
I waited for you to give more information on the issue, but you didn't. So I am sorry, but if you don't provide the details of what is going on it makes helping you very difficult. You didn't say what error you are getting, what the firmware version(s) are of what your trying to flash and what is currently on the phone.
Here's the last piece of help I can offer now.
I can tell you that the following can be found on the forum by searching:
Links and how to obtain the firmware - Multiple threads asking the same question exist here. Also Frija, SamFirm, SamMobile are just a few examples of what can be found referenced here.
Bootloader version(s) - what will happen when you try to downgrade and what will happen (along with a important thing) when you upgrade.
Websites to find firmware - SamMobile and some others have been mentioned.
Patched Odin - In case you need the latest version it has been mentioned here already.
I can also tell you that by using Google and searching for SM-975U1 XAA on Sammobile does in fact work.
Brother give me root file for note 10 plus SM-N975U android 10 version one Ul version 2.5 plz help me
Hi guys just got a new phone supposed to be uk unlocked sim free brand new.but its weird
The service provider sw ver dont look english to me
SPR/XAA/VZW
I have my ee sim card inserted and it works to make calls. But there is a weird notification saying OMADM activation not completed
Also says LTE on the screen something I've never heard of or seen here in england we use 4g volte.so I'm confused also the software for uk phones are BTU/BTU/BTU OR XEU/XEU/XEU
And last the box is weird as it says unlocked by Samsung and has a warming saying reproductive harm I was thinking wtf is this phone.
Also it says Qualcomm on the top on a sticker,we use xenox version england
Ps I brought it from Amazon uk
none of it of sounds like a uk version. more like a us one.
raul6 said:
none of it of sounds like a uk version. more like a us one.
Click to expand...
Click to collapse
Can you go into detail please as I'll need to send it back unless there is a way to change it to a uk phone.and what is omadm error popping up on every reboot
Bump for help please guys
No Samsung or phone experts here?that knows what any of this means?
haircut123 said:
Can you go into detail please as I'll need to send it back unless there is a way to change it to a uk phone.and what is omadm error popping up on every reboot
Click to expand...
Click to collapse
you have us version. it can't be turned into uk one. the error is to the with original us firmware and us network
I think it's a Sprint variant.
Samsung CSC Codes List (All) | Change CSC on Samsung Devices
Today, we'll explain Samsung CSC codes. Besides, we also have a list of CSC codes or region codes with a method to change CSC on Samsung.
www.droidviews.com
Is it new?
Yes from amazon uk
So this phone cant be used here in England then other than making phone calls ?and how do I get uk firmware onto the phone?I'm a noob and not good with computers
Also changing the csc codes to uk what will that change?as we dont even have the snapdragon model in england?so would there even be uk firmware for an American phone?
Google tells me spr means sprint and that's the first code of the 3
Vzw looking on google means Verizon and that's the 3rd code so the phone was originally a Verizon locked phone.thats was unlocked and flashed with sprint fw, because the second csc code says xaa and apparently that means unlocked.
So what does this mean for me a uk user.luke I said in the uk our phones are BTU/BTU/BTU or XEU/XEU/XEU if there uk and unlocked
If you have a active sim, try inserting it.
It should come online.
My unlocked 10+ I just got did, zero issues.
If not I would return it.
blackhawk said:
If you have a active sim, try inserting it.
It should come online.
My unlocked 10+ I just got did, zero issues.
If not I would return it.
Click to expand...
Click to collapse
How can I flash uk xenox firmware onto an American snapdragon phone?.I'm a beginner when it comes to this.as I only buy uk phones as I'm in the uk and it seems complicated flashing stuff this handset is a u version and I want to make it the f version
You cannot flash UK firmware on your US phone.
Just return it to Amazon, claim full refund as the product is not as advertised: no UK unlocked version, not new. Also screenshot in post #8 refers to firmware of a Note 9, not a Note 10 (N960 is Note 9), this makes this phone even more suspicious...
Return it. There's a lot of bs going on with sellers of this phone. This has gotten really bad. Amazon, saw some deceptive advertising there recently for this model and the N20U.
Best to contact the seller on the phone first; no phone contact, don't use. Make sure you are given full specs on their site and it's compatible with your country/provider.
Buy only a new one if possible. Used ones may be running on Android 11, you don't want that!
I was able to find a reliable US vender and got a new umlocked 10+ 256gb/12gb Snapdragon about a week ago for $800. It was as advertised except due to its manufacturing date is running on Q not Pie. It's a keeper.
OnnoJ said:
You cannot flash UK firmware on your US phone.
Just return it to Amazon, claim full refund as the product is not as advertised: no UK unlocked version, not new. Also screenshot in post #8 refers to firmware of a Note 9, not a Note 10 (N960 is Note 9), this makes this phone even more suspicious...
Click to expand...
Click to collapse
Oh sorry it's a note 9 i apologise.so if I cant change it to a uk firmware is the phone useless to use in the uk other than to call people?because my sim card works to make calls
Also OMADM activation not completed message is pissing me off
What does it even mean.i think my phone has sprint firmware on it?how can I change it to normal unlocked firmware so it's nothing to do with sprint I cant stant that OMADM ITS MAKING ME MAD
And Verizon is what I think the phone was originally.
Last thing the phone was sold as brand new sealed but it's not even in the correct box the phone I have is 128gb not 512gb
And it had a sealed sticker saying euro sim only but the phone is American? I think the box is fake ?as it looks nothing like any note 9 box I've ever seen
I'm going to try and flash the phone the phone is currently csc SPR/XAA/VZW boot loader 5 I've just downloaded android 10 also on bootloader 5 ovbisly the XAA VERSION will it work or can I only download and flash SPR FIRMWARE?
as I'm trying to get rid of the MADMEN activation not completed message
Update I tried to flash it but when I pressed start in Odin nothing happened so I guess I'm stuck on spr for life unless I forrgire out how to change the first csc
haircut123 said:
Update I tried to flash it but when I pressed start in Odin nothing happened so I guess I'm stuck on spr for life unless I forrgire out how to change the first csc
Click to expand...
Click to collapse
Check this https://forum.xda-developers.com/t/...and-guide-to-convert-to-usa-unlocked.3927478/
SubwayChamp said:
Check this https://forum.xda-developers.com/t/...and-guide-to-convert-to-usa-unlocked.3927478/
Click to expand...
Click to collapse
Cheers the phone is u1 allready just cant change SPR TO XAA
So it's impossible to flash to unlocked unbranded so it's going back to the scammer that sold it to me on amazon
haircut123 said:
So it's impossible to flash to unlocked unbranded so it's going back to the scammer that sold it to me on amazon
Click to expand...
Click to collapse
It's not impossible but if you are not experienced with better get it back, it doesn't worth the try, you can end by messing up completely.
I've flashed phones many many times before normally when I update the fw via ota and then regret it and need to downgrade back .this phone I just flashed but the start button wouldn't work because I was trying to flash XAA VERSION and not the SPR VERSION .I guess if I was to follow a guide on changing the csc from SPR TO XAA then flashing will work but what the point i wanted a uk brand new factory sealed sim free handset like I paid for
So this pos phone can go back to the scammer on amazon.its a discrace they are making fake seals on the boxes.using fake accessories and lieing saying the phones are uk.the average person would fall for this lies because the phone is unlocked my uk sim will work but you get that OMADM pop up and it's a nightmare.plus I doubt half the functionality will even work.