So, I'm very eager to upgrade to a 7.1.1 custom ROM from 6.0.1 (currently using Dirty Unicorns 6.0.1), but I seem to have an issue with any android 7.1.1 version of a custom ROM I install where the sensors for auto rotate and auto brightness stop working. I've tried complete wipes and resets and installed crDroid, resurrection remix dirty unicorns and lineage OS. All of them have the same result. When downloading any apps that can be used to test and calibrate sensors, they all will read for that the sensor is unavailable for all hardware in the phone except for Wifi and GPS. Is this a general issue with android 7.0.1 on nexus 5x or is this just me? I've yet to find any other forums or pages with anyone experiencing this.
Any suggestions at all on this? I don't want to be stuck using Android 6 forever.
Any advice that can be offered would be greatly appreciated!
Ryan
kvothe26 said:
So, I'm very eager to upgrade to a 7.1.1 custom ROM from 6.0.1 (currently using Dirty Unicorns 6.0.1), but I seem to have an issue with any android 7.1.1 version of a custom ROM I install where the sensors for auto rotate and auto brightness stop working. I've tried complete wipes and resets and installed crDroid, resurrection remix dirty unicorns and lineage OS. All of them have the same result. When downloading any apps that can be used to test and calibrate sensors, they all will read for that the sensor is unavailable for all hardware in the phone except for Wifi and GPS. Is this a general issue with android 7.0.1 on nexus 5x or is this just me? I've yet to find any other forums or pages with anyone experiencing this.
Any suggestions at all on this? I don't want to be stuck using Android 6 forever.
Any advice that can be offered would be greatly appreciated!
Ryan
Click to expand...
Click to collapse
Make sure you read the OP of the ROM you are installing.
Clean flash everything with correct vendor image.
kvothe26 said:
So, I'm very eager to upgrade to a 7.1.1 custom ROM from 6.0.1 (currently using Dirty Unicorns 6.0.1), but I seem to have an issue with any android 7.1.1 version of a custom ROM I install where the sensors for auto rotate and auto brightness stop working. I've tried complete wipes and resets and installed crDroid, resurrection remix dirty unicorns and lineage OS. All of them have the same result. When downloading any apps that can be used to test and calibrate sensors, they all will read for that the sensor is unavailable for all hardware in the phone except for Wifi and GPS. Is this a general issue with android 7.0.1 on nexus 5x or is this just me? I've yet to find any other forums or pages with anyone experiencing this.
Any suggestions at all on this? I don't want to be stuck using Android 6 forever.
Any advice that can be offered would be greatly appreciated!
Ryan
Click to expand...
Click to collapse
I have a similar problem with every 7.1.1 custom ROM. Lift to check phone is not working (and yes, ambient display is enabled, vendor is correct). Every stock-based 7.1.2 ROM does work. Try flashing Stock+ 7.1.2 and see if your sensors work.
indian84 said:
Make sure you read the OP of the ROM you are installing.
Clean flash everything with correct vendor image.
Click to expand...
Click to collapse
I am always clean flashing. What do you mean by correct vendor image? It's always a bullhead version of the ROM. Maybe I misunderstand what you mean.
kvothe26 said:
I am always clean flashing. What do you mean by correct vendor image? It's always a bullhead version of the ROM. Maybe I misunderstand what you mean.
Click to expand...
Click to collapse
There is something called vendor image that you have to flash along with the ROM. It's generally linked to the build number.
Read the OP of the ROM you are using, it should have the correct vendor image you should use. If THE OP does not mention anything about the Vendor image, just search the thread or politely ask what vendor image to use.
Hopefully someone should link the download link for you. If not, you can easily Google it.
indian84 said:
There is something called vendor image that you have to flash along with the ROM. It's generally linked to the build number.
Read the OP of the ROM you are using, it should have the correct vendor image you should use. If THE OP does not mention anything about the Vendor image, just search the thread or politely ask what vendor image to use.
Hopefully someone should link the download link for you. If not, you can easily Google it.
Click to expand...
Click to collapse
Ohh. I was never aware of having to do something like this. I've always just downloaded the ROM and flashed it. Really appreciate this! Thanks! I'll have to give this a try.
kvothe26 said:
Ohh. I was never aware of having to do something like this. I've always just downloaded the ROM and flashed it. Really appreciate this! Thanks! I'll have to give this a try.
Click to expand...
Click to collapse
I have a strong feeling flashing correct vendor image will solve your problems.
indian84 said:
I have a strong feeling flashing correct vendor image will solve your problems.
Click to expand...
Click to collapse
You were right!
I downloaded the latest image from google and used the flash-all.bat script through fastboot, reflashed twrp, flashed crDroid 7.1.1, got a vendor image mismatch error on boot, then flashed the recommended vendor image version and now I'm booting without error and all sensors are working! I noticed Wifi detection and connection were working a but slow before, now everything is working perfectly. I was completely unaware that this needed to be done. It never came up as an issue for me when I was on Nexus 5.
I love the XDA community! Thanks a million for your help!
kvothe26 said:
You were right!
I downloaded the latest image from google and used the flash-all.bat script through fastboot, reflashed twrp, flashed crDroid 7.1.1, got a vendor image mismatch error on boot, then flashed the recommended vendor image version and now I'm booting without error and all sensors are working! I noticed Wifi detection and connection were working a but slow before, now everything is working perfectly. I was completely unaware that this needed to be done. It never came up as an issue for me when I was on Nexus 5.
I love the XDA community! Thanks a million for your help!
Click to expand...
Click to collapse
Separate Vendor partition was introduced with 5X and 6P. It was not needed on earlier devices.
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this.
Disclaimer: Only tested with RR, PixelExperience, and ArrowOS GSI.
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
4. Fluid NG - App in Google Play Store to have the same recents/home/back gestures from MIUI 10.
reasonablebasis said:
Disclaimer: I am not a developer (I don't code), but I have been flashing ROMs for many devices over the years. This is more of a practical guide from an end-user perspective in pursuit of finding the best ROM for this magnificent hardware. This is more of a compilation of all the relevant information I found. I'm very open to suggestions/corrections that could improve this
I haven't seen a proper guide to flash GSI ROMs for Mi Mix 3, thus I decided to share what I know that works. I put a brief explanation for each step below.
1. Unlock Bootloader - If you haven't done so yet, I recommend following the instructions in https://www.reddit.com/r/Xiaomi/wiki/bootloader
2. Install TWRP
a) I recommend to use the official TWRP from this link https://twrp.me/xiaomi/xiaomimix3.html or refer to the forum https://forum.xda-developers.com/mi-mix-3/development/recovery-unofficial-twrp-recovery-t3901261.
b) To install TWRP, I recommend to follow the instructions from Xiaomi.eu. For those not familiar, the "twrp.img" in the code should be the full path of the file. Something like "D:\folder\twrp.img"
c) If you have an older version of TWRP, I suggest to update it to the official.
3. Install Xiaomi.eu - Start from this step in case of bootloops or issues (especially caused by Magisk modules by my experience)
a) This is what I do instead of the 'flash vendor.img from Chinese Dev' prerequisite mentioned in other threads. This is an easier step (just one flash in TWRP) and a better fallback (a working ROM) in case things go wrong. I have had no issues (fingerprint, calls, etc..) with this and I've done this thrice.
b) Download the latest MIUIv10.2 Stable for MIMix3 from the link https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-stable-release.47170/.
c) Wipe > Format Data (prevents problems, and removes encryption if you had it). Also do Factory Reset (idk, just to be sure).
d) Copy xiaomi.eu ROM to internal storage, then Install > Flash. No need to boot/restart, proceed to the next step.
4. Install GSI ROM - wth is GSI? https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
a) We can actually install any GSI in https://forum.xda-developers.com/project-treble/trebleenabled-device-development but there is an issue in installing Google Apps (Open GApps) as many people mentioned in https://forum.xda-developers.com/mi-mix-3/development/9-0-resurrection-remix-v7-0-t3891975 and as confirmed by the official TWRP thread https://forum.xda-developers.com/mi...p-recovery-t3901261/post79035909#post79035909
b) Given the above, the only feasible options are GSI ROMs with built-in GApps and the only 2 I found are PixelExperience GSI and ArrowOS GSI. As GApps is integrated in the system.img, no need to flash Open GApps thus no issues. Having tried both, I personally recommend ArrowOS due to the performance and additional customization options.
c) Download the arm64 AB version (ArrowOS as an example) https://forum.xda-developers.com/pr...abled-device-development/gsi-arrowos-t3835111
d) Copy the resulting system.img to internal storage (extract if its a .zip), in TWRP click Install > Install Images > select system.img of ArrowOS > select System partition. You can now boot, or follow next step to root with Magisk.
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-mix-3/how-to/root-magisk-18-2-mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Final Thoughts
ArrowOS GSI seems to be stable enough and I'm using it as my daily driver now. I am so much happier compared to when using MIUI Global ROM. I really like the performance (very fluid), battery life (a lot better than MIUI Global), customizations (like traffic indicator, status bar stuff), unli Google Photos, and everything that makes AOSP/stock android awesome. No more bloatware, annoying non-dismissable notifications, and horrible auto brightness from MIUI.
The only real issue I encountered so far is the bluetooth audio/music issue, but this seems to be a common problem in GSI ROMs. Bluetooth calls work though. There is no app to handle the slider (but I don't care. lol). Lastly, the AI button becomes useless, but see below for the fix.
Optional stuff that makes things better:
1. Remapping AI button - When using GSI ROMs, AI button becomes useless. But to map it back to Google Assistant (or anything actually), follow the instructions from this thread (needs some knowledge about Tasker). https://forum.xda-developers.com/showpost.php?p=78523778&postcount=38 For the Tasker Task, I selected Input > Voice Command. This now assigns the button to open Google Assistant. Does not work well when screen is off though, but its just easy to unlock.
2. Google Camera - The main reason why I bought this phone. Google Camera brings out the best in the awesome camera - Use this version https://forum.xda-developers.com/mi-mix-3/themes/gcam-6-manual-focus-long-exposure-t3885610
3. Stereo Speaker Mod - https://forum.xda-developers.com/mi-mix-3/themes/magisk-stereo-speaker-mod-mix-3-t3900580 Makes the phone earpiece into a speaker, increasing overall volume. I personally use version 3 and I'm very happy.
Click to expand...
Click to collapse
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well. CTS will fail for obvious reasons
Mackay53 said:
Not all GSI work ontop of Xiaomi Eu
Flashing magisk and safety net patch also doesn't guarantee safety net passing on a few of the GSI as well.
Click to expand...
Click to collapse
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Can't remember as it was a while ago, possibly OctoOS and descendant and 1 other, omni ROM maybe.
For the ones that come with SU you need to navigate to the xbin folder in the system and remove the SU file.
Then cause Xiaomi EU uses the wrong fingerprint props you need to use the magisk props config module and manually type in the mix 3 fingerprint (unless the module has been updated to include mix 3).
If you installed the Chinese dev vendor then the props will be there ready to be used so the magisk module can make them active without manually typing it. This will sort out both safety net fails.
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
reasonablebasis said:
Noted. Which GSI have you tried that do not work on top of Xiaomi.EU? I tried RR, PixelExperience, and ArrowOS and all work well. I can put this as a disclaimer.
Any solution for the Magisk safetynet, or is this really the best solution available so far?
Click to expand...
Click to collapse
Pixel dust gsi too....
reasonablebasis said:
If this was sometime ago, the features in China Dev would have already been integrated in the latest China Stable, which is the basis of Xiaomi.EU.
Maybe you can test it now to see if Xiaomi.EU really works. I tried it with RR, PixelExperience, and ArrowOS and I'm facing no issues. So flashing China Dev vendor.img seems to be an outdated instruction.
Click to expand...
Click to collapse
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Mackay53 said:
The 3 GSI you mention is a very small sample of the GSI available so you can't say it's an outdated instruction. Have you tested them all like I have? No you haven't.
Xiaomi EU does not use the correct mix3 vendor.img, that's what causes the issue.
Click to expand...
Click to collapse
Ok, I'll put a disclaimer that this only works on RR, PixelExperience, and ArrowOS. Anyway, I'm sure that the latest stable Xiaomi.EU vendor works without any issues with ArrowOS, else why would I be using it as my daily driver.
[deleted, duplicate post]
Someone know if there is a GSI with gapps and that don't have issue with bluetooth?
SafetyPatch module
reasonablebasis said:
5. Install Magisk
a) The Magisk version that passes SafetyNet is the builds from ianmacd https://github.com/ianmacd/MagiskBuilds look for v18.2 (newer versions might work but I haven't tried them yet). You can still use the official Magisk Manager and the ianmacd version will be recognized. Just change the update channel in Magisk to https://goo.gl/yZpnrf. Credits to this thread https://forum.xda-developers.com/mi-...mix-3-t3905754
b) After flashing Magisk, boot, install Magisk Manager, then download and install the module "SafetyPatch". SafetyNet check will now be success.
c) Even though SafetyNet is passed, some banking apps still are not working. Hopefully someone can share a solution (probably MagiskHide Props Config, or canary builds?) to make banking apps work.
Click to expand...
Click to collapse
Mate, I can't find this module via Magisk Manager... Please help!
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
You sure? Try searching for "SafetyPatch"
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Strange....
reasonablebasis said:
You sure? Try searching for "SafetyPatch"
Click to expand...
Click to collapse
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
On Arrow ?
Wahoux said:
On Arrow ?
Click to expand...
Click to collapse
Yep! Not sure how to prove that though xD
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Wahoux said:
Android Q GSI !
https://www.xda-developers.com/android-q-gsi-project-treble/
Click to expand...
Click to collapse
Dare to try? xD
jonny908 said:
Dare to try? xD
Click to expand...
Click to collapse
ahah no xD
Right now i'm about to flash Arrow, I hope I won't have bluetooth issue . On the non-GSI Pixel Experience, some reported issue with bluetooth whereas it was working fine for me... so let's see :fingers-crossed:
jonny908 said:
Mate, I can't find this module via Magisk Manager... Please help!
Click to expand...
Click to collapse
jonny908 said:
Issue resolved. I had to use Magisk Manager 7.x.x, I was trying using 6.0.
Installed, MagiskHide working as it should now.
---------- Post added at 18:23 ---------- Previous post was at 18:15 ----------
@reasonablebasis
Sorry for third post in a row., but.... I have no issues with bluetooth audio/music that everyone is talking about. Listening to Spotify on my QCY bluetooth earphones now.....
Click to expand...
Click to collapse
Wow good for you. You flashed xiaomi.eu prior to GSI right? enumerate the steps you did, so that we we hopefully can replicate your success. Hehe
Why??? why Xiaomi why...
I've followed a lot of tutorials to flash a camera 2api module enabler this shouldn't be complicated so i'm gonna post what i have been doing to see if someone can help
Bootloader unlocked
In fastboot mode:
fastboot flash recovery twrp.img (am using the latest)
So i flash twrp temporarely just to enable gcam
In twrp i used a lot of modules but none of them work
Some even say that the flash was sucessful but in manual camera compatibilty it knows that the cam2api isn't enabled
If anyone could help it would be amazin
(Miui 11.0.5 Android 9)
My fear is that i can't flash cam2api on pie that would be a shame
Also, i don't want to root the phone that's why i'm not using a build prop editor
Ok so this just got more bizarre i've extracted the build.prop and the changes are there
the value is set to 1!!... but i am still failing any camera 2 api test...
If someone could help me understand this behaviour it would help a lot
Same for me. All camera2api guides I've seen are more or less sophisticated ways of adding lines to /system/build.prop, but that doesn't seem to be enough to enable camera2api and I'm dying to know why.
Whyred, MIUI Global 11.0.3, Android 9, bootloader unlocked. When I pull build.prop to my PC, it contains both "persist.camera.HAL3.enabled=1" and "persist.vendor.camera.HAL3.enabled=1", but camera tests fail and ported gcams just crash.
All ideas welcome.
Hi! today i was thinking to post some gsi i used
1: Pixel Experience (https://forum.xda-developers.com/t/gsi-unofficial-12-pixel-experience.4354695/)
Android 12, i had a very nice experience. All the GApps, nice customization. 10/10
2: CrDroid (https://forum.xda-developers.com/t/rom-12-0-crdroid-8-official-miui-cam-included.4387221/)
Also nice, but no GApps 8.1/10
3: Caos: (https://forum.xda-developers.com/t/caos11-project-aosp-based-on-october-build.4338637/)
Also no GApps, but i saw that is AlwaysOnDisplay which was nice, since i use it very much
!!This is my personal opinion, no hate to anyone!!
(To mention, my phone has an problem, because hotspot and headphones won't work, anyone has an ideea what is the problem?)
Thanks for looking, hope i was helpful in finding something new for your phone.
Cheers!
How did you install these GSI I'm starting now, thanks
CallMeNico said:
Hi! today i was thinking to post some gsi i used
1: Pixel Experience (https://forum.xda-developers.com/t/gsi-unofficial-12-pixel-experience.4354695/)
Android 12, i had a very nice experience. All the GApps, nice customization. 10/10
2: CrDroid (https://forum.xda-developers.com/t/rom-12-0-crdroid-8-official-miui-cam-included.4387221/)
Also nice, but no GApps 8.1/10
3: Caos: (https://forum.xda-developers.com/t/caos11-project-aosp-based-on-october-build.4338637/)
Also no GApps, but i saw that is AlwaysOnDisplay which was nice, since i use it very much
!!This is my personal opinion, no hate to anyone!!
(To mention, my phone has an problem, because hotspot and headphones won't work, anyone has an ideea what is the problem?)
Thanks for looking, hope i was helpful in finding something new for your phone.
Cheers!
Click to expand...
Click to collapse
How did you install these GSI I'm starting now, thanks
[RECOVERY][UNOFFICIAL] TWRP for Galaxy A22 SM-a225F/a225M Android 11+12
UPDATE Flash at your own Risk !!! Tested Working: Backup Flash zip Fastbootd support Flash gsi roms Not Working: Usb Otg You tell me How to Flash on Android 11 1. Reboot Device to Downloadmode 2. Unlock Bootloader 3. Install adb and...
forum.xda-developers.com
Here is a guide
Proximity sensor is broken on any GSI roms. Anyone is able to fix it? Did I flashed something wrong?
Rolimlucas said:
Proximity sensor is broken on any GSI roms. Anyone is able to fix it? Did I flashed something wrong?
Click to expand...
Click to collapse
Hi, the same thing is happening to me, could you find a solution?
dtlucillek20 said:
Hi, the same thing is happening to me, could you find a solution?
Click to expand...
Click to collapse
No, I couldn't find any fix or anybody who could help me. So I moved to stock ROM and rooted it