Hi Guys,
I've just ordered 17 touch pro 2's for work and I'm very impressed with them so far. Absolutely awesome phone. We've just got one issue which is the fact that when the phone is locked (we used centralised policies with exchange) you can't dial from our Parrots. The phone says you must unlock the device to allow bluetooth connection.
Does anyone know a way around this without taking the locks off of the phone which is a big no no. Tested it with a collegue's Omnia and it works fine.
You can replicate this issue by using the Bluesoleil dialer which is what I've been doing for testing.
The parrot receives calls fine, just can't make them he the phone is locked.
TIA.
Same problem
Hi there,
I'm having the same issue for dialling out via bluetooth whilst the phone is locked. The TP2 says it needs to be unlocked before answering the call.
There MUST be some registry key to change to prevent this "feature" ... none of the previous HTC phones I have had have had this problem.
Thanks in advance for any help!
i have the same problem, i installed s2u2, which solves the not being able to dial out when its locked, but it's not the most reliable solution.
i'd rather have it working like it did on my kaiser before this phone.
hope someone helps us out.
I tried out S2U2, but the problem is it's only a keypad lock, so plug the phone in USB for example and you still have full access to the device.
S2U2 also does not stop you sliding out the keyboard and pressing the mail button to read the emails on the phone, so this isn't a solution we can use, it's not even a compromise
Haven't had much luck with HTC support either. They are very quick to respond but don't respond with anything of value.
I just wanted to bump this thread -- I picked up a Tilt2 and have the same problem -- really annoying when trying to dial from the car and having to unlock (didn't have this issue on my Fuze).
Yeah this is the most annoying thing I have ever seen. There must be a way to turn it off. I use Ford Sync and really don't want to have to worry about my phone being locked or unlocked. Seems like this goes against all those phone laws. You are making me look at my phone first to make sure it isn't locked before I can safely dial.
Wish I had found this thread before I went ahead with getting a Tilt 2. Didn't have this problem with my Tilt.
Is this a WM6.5 limitation? Hopefully there is an obscure setting that I'm too stupid to find.
Cheers
... and I was just about to ask on this thread whether or not this was still a problem in WM6.5 but I guess I have my answer now.
It's definitely an issue in WM6.0
I contacted AT&T and they said to contact HTC.
HTC gave me this answer:
Thank you for contacting HTC Technical Assistance Center. I apologize for the length of time it took me to respond to your email. I understand how important it can be to use Bluetooth from your device when your device is locked. I will be happy to address the concern for you.
There is not a setting on your ATT Tilt 2 for enabling Bluetooth when your device is locked. When pairing Bluetooth with your vehicle your device must remain unlocked to use the correct functionality. I would suggest placing your device into hibernation mode and keeping your device in a carrying case.
Hi,
I have upgraded by TP2 with the offical HTC rom for 6.5 and installed my blackberry connect 1.06 client. Now, even with the BB lock enforced, as it was with the TP2 using 6.0 and it is working perfectly handsfree in my CAR, locked or not. Previously the TP2 with the stock 6.0 ROM wouldn't make calls when locked.
If people are reporting here that is didn't work in 6.5, then there must be a registry setting somewhere to enable or disable it.
I am just happy that I can make a call in the car, without having to pull over and unlock my phone.
If someone can give me a hint as to where in the registry to look I can compare some settings?
I have a stock AT&T Tilt-2, I loaded loaded "smartlock 1.7" to autolock the phone at power off and also when "in-call" to avoid random dialing. I don't use the PIN for locking.
I can dial hands free BT in my car and with headsets with no issues, power on/off whatever.
Maybe it'd disabled when locked with the PIN?
I am seeing the same issue with two of my users:
One is using a Verizon Wireless TP2 with MW6.1 stock ROM
The other is using an Unlocked HTC touch Pro 2, on the AT&T wireless network (not a Tilt2) with the HTC WM6.5 ROM upgrade.
The Verizon users is using Sync on his Ford Vehical. The other is using whatever system is in his BMW.
Both can pair with the car's system, but if the phone is locked with a PIN the user is not able to place a call without first unlocking the phone.
Has anyone found any information on this?
If MSVC is an option then it has the ability to dial while password protected.
Just noticed this has been bumped. I upgraded all of our phones to the standard Windows Mobile 6.5 from Vodafone when it came out a month ago and this problem is now resolved you'll be glad to know.
I've got 25 handsets currently working fine with no real issues. All the niggles that I had have gone away with 6.5 so it's definately worth the upgrade.
6.1 was screwed and no use with handsfree dialing if you use windows lock which we enforce on our exchange server.
Seems like every provider is a little different.
I have the AT&T Tilt 2 which came with WM6.5, AT&T support claims its a Microsoft and HTC problem. HTC claims its a Microsoft problem.
Anyone have a good support link to Microsoft to get this problem resolved?
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Registry
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
black88mx6 said:
Can someone with a working 6.5 rom please post the following registry info to see if there is a way to enable the bluetooth dialing on the roms that are not working?
HKLM\Software\Widcomm\General
When you get the unable to dial message it puts a new key in there called DontAskHfpCallFailOnDeviceLock and I figure that the bypass might be in this same area.
Click to expand...
Click to collapse
erenken said:
Here is everything under the BTConfig\General section.
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\General]
"StackMode"=dword:00000001
"DeviceName"="HTC-ST7377"
"BDAddr"=hex:\
00,23,76,37,a9,89
"BlockBTIfHopper"=dword:00000001
"SendCompressedTelProperties"=dword:00000001
"UsePocketPCName"=dword:00000000
"UnnamedDeviceName"="<No Name>"
"UartPriority"=dword:00000096
"TransmitPriority256"=dword:00000098
"SuspendWithScoConnected"=dword:00000001
"SuspendTimeout"=dword:00001388
"SndPriority"=dword:0000009b
"SecurityType"=dword:00000002
"SCODelayTime"=dword:000007d0
"ReceivePriority256"=dword:00000097
"RadioInitLibrary"="BRCMInit.dll"
"PowerControlLibrary"="Serial_BTUR_DM.Dll"
"PCRemoteAutoConfig"=dword:00000001
"OriginalAudioDriver"="wavedev.dll"
"KeepStackLoaded"=dword:00000001
"EnableAFH"=dword:00000001
"DiscoverableTimeout"=dword:0000003c
"DeviceInactivityDuration"=dword:0000003c
"ConnectRelatedDefault"=dword:00000000
"BIPEnabled"=dword:00000001
"AFHAvoidedChannels"=dword:00000014
Click to expand...
Click to collapse
erenken,
Thanks for the info. The only item different on my 6.5 Tilt2 is that I also have a key "DontAskHfpCallFailOnDeviceLock"=1. Sounded very promising.
Unfortunately, changing this key to 0 and even deleting it doesn't make a difference: I still cannot dial via bluetooth while the phone is locked with a pin. I tried these changes both with and without a soft reset between.
mnunes:
Were you able to find a fix for this? I am in the same boat.
DaBody1 said:
mnunes:
Were you able to find a fix for this? I am in the same boat.
Click to expand...
Click to collapse
No, so far no luck. I can't say I've been looking very hard, though. It's one of those things I've started to learn to live with, as annoying as it is.
I have a Samsung Galaxy Note 4 Edge from Verizon. Everything worked fine on the phone until one day a problem just occurred and even with the help of Verizon’s tech support, I haven’t been able to resolve it. The problem is whenever I receive an incoming call, the caller cannot hear a tone when I press anyone of my dial pad keys. This makes it impossible to proceed through an automated system that requires you to press certain numbers in order to advance. NOTE … I only experience this problem on incoming calls! If I initiate the phone call, the party I’ve called can hear a tone whenever I press a key on my dial pad. That means I can place a call to an automatic system and proceed through it by pressing the keys necessary to reach my desired destination.
Verizon’s tech support suggested that I reset my phone to its new, out of the box condition. I did that and it didn’t fix the problem. I tried starting the phone in safe mode, thus taking any 3rd party apps out of the equation and that didn’t help. I tried changing the DTMF setting from normal to long and that made no difference. Finally Verizon sent me out a new phone and that didn’t fix the problem. And last but not least, Verizon gave me a new sim card, which still didn’t fix the problem. Now I have all new hardware and the same old problem! Verizon keeps bumping me up the tech assist ladder, but so far no one has come up with a solution.
If anyone has any ideas, thoughts or suggestions that would help to solve this mystery, I would be eternally grateful!
Thanks in advance!
Good luck! I'm on my 4th replacement and still have all of the same problems. Now they are sending the phone to Samsung to tear apart and checking my cell area for related problems. Both mine and my wife's note 4s are plagued by the same problems. I guess the next step is trying a different manufacturer.
Sent from my SM-N910V using Tapatalk
I had his same issue on Verizons iphone 6 and iphone 6 plus, could never get through automated menus.
Now that I think of it, I have had this issues on my G4 and G3 and pretty much any device on Verizon.
Hi, I until recently I had Xiaomi Note 6 Pro, great phone and it was the global version I believe, one of the many thing I liked was the fact that it had Call recorder built in, and meant that I could record all my phone calls in and out and set to automatically record, I found this very useful as my hearing is not the best and it enabled me to play back the call so that I could clarify the conversation.
I now own Mi 10T lite, great phone and I am mostly pleased with it, but I can't record my calls, I purchased it via Xiaomi Uk (I am in the UK) I read somewhere that the EU had banned the recording of calls (or something like that)
So has anyone got any Ideas how I can get this phone to record calls, I don't want to root the phone or load any other Roms, I am wishing to keep the phone as it was delivered, happy to use an app, providing it can be set to record all.
Your help would be great, Thanks
graham35 said:
Hi, I until recently I had Xiaomi Note 6 Pro, great phone and it was the global version I believe, one of the many thing I liked was the fact that it had Call recorder built in, and meant that I could record all my phone calls in and out and set to automatically record, I found this very useful as my hearing is not the best and it enabled me to play back the call so that I could clarify the conversation.
I now own Mi 10T lite, great phone and I am mostly pleased with it, but I can't record my calls, I purchased it via Xiaomi Uk (I am in the UK) I read somewhere that the EU had banned the recording of calls (or something like that)
So has anyone got any Ideas how I can get this phone to record calls, I don't want to root the phone or load any other Roms, I am wishing to keep the phone as it was delivered, happy to use an app, providing it can be set to record all.
Your help would be great, Thanks
Click to expand...
Click to collapse
Hi Graham, I have Mi 10T lite 5g on Three in UK. Not rooted. I am using Cube ACR free version, installed using defaults and it works well. It also manages to link the calling number to my contacts (with permission). The caller is a bit quieter than my side of conversation but loud enough when replaying. I used Cube on my last 3 Xiaomi phones, one rooted two not rooted. It worked on all three.
eemNote3 said:
Hi Graham, I have Mi 10T lite 5g on Three in UK. Not rooted. I am using Cube ACR free version, installed using defaults and it works well. It also manages to link the calling number to my contacts (with permission). The caller is a bit quieter than my side of conversation but loud enough when replaying. I used Cube on my last 3 Xiaomi phones, one rooted two not rooted. It worked on all three.
Click to expand...
Click to collapse
Thank you for the info, I will give it a try, and it is good to hear you have it working well with the M10T Lite, I really liked the way the Xiaomi Note 6 pro, had it integrated in the system, everything about it was simple, but I will give the Cube ACR a try thanks.
I would still be interested to hear what other people may be using as well, thanks
Hi
I was given a Pixel phone from a friend who bought it online on Ebay.
However i think it is an Engineering set. The phone is not normal.. it has no dialer, goggle app store or any normal applications, noo google chrome.. i cannot even set the phone to USB debugging
Can some one in this forum help me to flash a normal android 10 on this machine
YOur help will be much appreciated.
Regards
BC888
You still looking for this? I can help you
Hello All,
It's been a while since I've been on XDA, and I recently upgraded from a Redmi Note 6 Pro to a Redmi Note 9T to take advantage of 5G.
So far I'm loving the phone, but there is one peculiarity, and that's noted in the subject. It seems to have appeared right after I issued the dialer code, *#*#86583#*#*, to enable VoLTE on my phone, which is a global model on which VoLTE comes disabled by default.
I cannot understand why Security is constantly flagging Data Roaming when it is already set to Never. I have been ignoring the message, but if there is a solution to make it stop I'd love to hear it. This is one I just have not had any success finding any good information on. I've never been in a situation where international data roaming could have come into play, and yet this warning persists.
Thanks in advance for any insights.