Related
EDIT 8/2/19: I do not own this device anymore. So i cannot and dont know if anything changed about the procedures unlocking rooting etc. BUT if you are getting any trouble i might can help you. Comment your thoughts below
Hey guy, i saw a lot of guys here wondering how to root and flash twrp recovery on thier devices . Today i am gonna show you how to do that.
First of all make sure 3 things :
1. backup your images, contacts, music tracks etc on a external SD CARD, or on your computer.
2. You MUST have the BOOTLOADER unlocked. To do that, read this guide http://en.miui.com/thread-202290-1-1.html
3.Charge your device to 80%+
HOW TO FLASH TWRP AND ROOT MI MAX
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img"
14. Your phone is now in TWRP recovery mode ( if it is not, the write on ADB: reboot recovery )
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
DOWNLOADS
1. ADB- (https://forum.xda-developers.com/showthread.php?t=2588979)
2. XIAOMI MI MAX HYDROGEN DRIVERS (http://xiaomiadvices.com/download-xiaomi-usb-drivers/)
3. TWRP RECOVERY IMAGE https://dl.twrp.me/hydrogen/ LATEST VERSION IS twrp-3.2.3-0
4. BetaSuperSu 2.74 http://www13.zippyshare.com/v/OFQGvIyA/file.html
RESERVED
The thread must be removed to XIAOMI MI MAX GUIDES, NEWS, & DISCUSSION
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
This device uses dm-verity!
This means that swiping to allow system modifications will prevent you from being able to boot if you are using the stock kernel. In order to bypass dm-verity's boot prevention, you will have to install a kernel that has dm-verity disabled in the fstab.
Click to expand...
Click to collapse
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
hello, please write again your problem. I can understand what do you mean.
StonebridgeGr said:
hello, please write again your problem. I can understand what do you mean.
Click to expand...
Click to collapse
Ok just two questions then, because I'm not sure what you can't understand. Please explain.
1) What Android, MIUI and kernel did you root?
2) Do you have SuperSu.zip in TWRP 3.0.3 by default? You didn't say anything in your guide about downloading it and from where + what version.
noob456 said:
Hallo Friend!
I am about to test your guide. I think it is most decent among other guides on the net...
Could you please just tell me if it's gonna work on:
Android 6.0.1 MMB29M
MIUI 8.2.1.0 (MBCMIDL) Stable
kernel 3.10.84-perf-gfe86e7b
bootloader UNLOCKED
Is superSU by default included in the TWRP you gave? No need to download it additionally from somewhere?
What about warning about "dm-verity" on official TWRP website?
Should this be any concern that the phone will not boot up again? Should this be disabled first?
Is it better to use the TWRP version you provided (3.0.3.0? not listed on official TWRP website? why?) or the lastest 3.1.0.0?
Click to expand...
Click to collapse
This twrp. Img it's for all the versions but only for mi max. Not the prime . This twrp doesn't contain superSU. If I remember correctly. But if on the TWRP contain the super su. Don't say yes. Just flash it like I saying on the guide. Maybe they upload a newest version. You can use the new. I think I put the official website . I will check it.
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
noob456 said:
Ok thanks for the answer. Please check from where I download SuperSu - which version would be best.
Please tell me your Android, kernel and MIUI version that you rooted.
Click to expand...
Click to collapse
LOL I forgot to add the superSU link...
That's what I told you. Then please do.
noob456 said:
That's what I told you. Then please do.
Click to expand...
Click to collapse
ok on the first post you can find all the links. if i miss something please tell me here !
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
It's compatible with mi max. You will not have any problem. Don't worry
noob456 said:
Is this beta version of SuperSU reliable? Did you use it? Not better to use a stable version?
Click to expand...
Click to collapse
Waiting to tell me if everything went fine with the installation and the flashing
Hey, tried following Your guide to install a new rom last night. Great guide for noobs like me, but it may be worth renaming the thread to something like "How to flash whatever makes You happy on to Your Mi Max". These instructions seem to work fine regardless of what's being flashed. Great job, mate!
So I finally tried it and it was successful for me as well! But I used the latest version of TWRP (3.1.0) and SuperSu (2.79-20161205). Please add a point in your tutorial to upload SuperSU.zip to the phone first, because out of emotion, I forgot... So I flashed TWRP, booted it and then... ups... no SuperSu So I wanted to reboot the phone to upload SuperSU but since only SuperSU patches dm-verity (the thing I was afraid of the most - I told you before), my phone got into boot-loop and didn't want to start. So I just uploaded SuperSU to a memory card, entered Fastboot Mode again with key-combination, plugged the cable, typed "fastboot reboot-bootloader" command and was again in TWRP to flash SuperSu from my memory card.... ufff.
So I would reedit it a bit:
0. Copy SuperSU.zip to the phone/memory card!
1. Go to Settings-About phone-Find the MIUI VERSION, and tap on it for 5-10 times.
2. Go back to settings, sellect adittional settings. click on Developer options, and select enable
3. Find the option USB Debugging and enable it.
4. Download the TWRP recovery from the link
5. rename the file to 'recovery.img'
6. Move the image to the same file where the ADB was installed ( it should be on Computer-> C: -> Adb )
7. Open the adb folder
8. Press and hold the shift key and right click in the folder
9. click on the option "Open command window here"
10. Boot your device on fastboot mode by turning it off, pressing Power and the Volume Down buttons together, and then connect it with your computer
11. First type this command "fastboot devices" to check if your device is into fastboot mode
12. Enter the command "fastboot flash recovery recovery.img"
13. Enter the command "fastboot boot recovery.img" - the phone will get disconnected from your PC automatically
14. Your phone is now in TWRP recovery mode (it takes about 30-60 seconds before FastBoot screen switches into TWRP - wait patiently)
15. select Install Zip and click on 'SuperSu.zip'
16. corfirm the flash
17. reboot your device
18. DONT PANIC IF YOU DEVICE WONT TURN ON. Sometimes need to wait 10-20 secs.
Hey, I just got connected with WiFi and new MIUI 8.2.3.0 MBCMIDL wants to be installed, although the phone is rooted with bootloader unlocked. Is it safe to apply the update? Is it goona remove root so that I have to go over the process again?
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Is there anyway to root the phone without connecting it to pc?
noob456 said:
So I tried the update. First time it said it failed, second time it downloaded the whole ROM after which it rebooted device and TWRP started doing "something" - I don't know what. After that the phone didn't want to boot, and what's even better didn't want to run recovery (TWRP), instead it went into fastboot. What I had to do was to use MiPhoneDrivers from this topic: https://forum.xda-developers.com/mi-max/how-to/guide-install-global-miui8-root-t3435594 (including MiFlash 2015, because 2016 version didn't want to work properly on my PC) and follow the instruction from official MIUI website to flash from scratch the new ROM MIUI 8.2.3.0 which I did. After that my phone was alive again. I installed TWRP and rooted the phone again. Now I've got MIUI 8.2.30 rooted. :] End of the story so far. My settings left untouched - icons, wallpaper etc. So that would be the way to update MIUI if they prepare a new one.
Click to expand...
Click to collapse
Thanks for saving me the trouble.
Can someone help with a better method of applying updates?
Will downloading the zip (1.4GB approx) and flashing via TWRP help?
EDIT: included rough procedures for OEM unlocking, and updated link to recovery-verified.img (Sorry for uploading the wrong file ><)
Hi all bv9000 pro Users!
Recently I went on a journey to root this awesome rugged phone with one purspose: to remove that F*@(#&$ god awful loud annoying sound triggered by the OS when you use a camera app to take a picture + the boot startup sound (A bug blackview hasn't gotten around to fixing).
I successfully managed to port TWRP 3.1.1 from the Blackview bv8000 Pro and run it on the Blackview bv9000 Pro-f!
I've then managed to flash in Magisk to gain root access.
DISCLAIMER: I do not take responsibility for any bricked phones caused by the process, do so at your own risk (yadayadayada).
NOTE 1: Although I've got it running on the bv9000 Pro-F, this image should also work for the non-fullHD version, if someone can test this I'd be happy.
The link to the stock ROM (with the modified recovery img) can be found in the post below.
NOTE 2: No need to download anything other than what I've listed, Magisk is included in my custom recovery to circumvent the need to load the devices encrypted storage (or any other external storage) nothing stops you from mounting external usb storage.
What you'll need:
- USB Mouse (As there is no touchscreen input support, your device should have come with a usb-c otg cable so there's no problem here!)
- MediaTek SP Flash tools (I'd recommend the latest version) https://spflashtool.com/
- unlocked bootloader (You should be able to do this via the developer settings -> unlock OEM Bootloader)
EDIT: To unlock the boot loader, do the following:
1) Go to settings -> unlock OEM Bootloader (tick)
2) plug your device in (assuming you have ADB installed), use adb to access fastboot via. command prompt:
"adb reboot bootloader"
Then once the device is rebooted into fastboot mode
"fastboot oem unlock"
KEEP IN MIND THIS WILL REMOVE ANY FILES, so back them up
- I've done this with windows, but you should be able to repeat with linux no problems!
- A little patience
Pre-preparation:
First install any updates and back up your data (it's just easiest to use the google cloud backup as restoring becomes easy as pie, updating also fixes the setup wizard crashing on first setup). This is necessary because OTA updates cannot be performed with TWRP recovery, and flashing TWRP before doing OTA updates will flick the device into a recovery boot loop.
Install the SP Flash tools, and the MediaTek VCOM Drivers
(I won't link the specifics here, a quick google search should be able to help you, just note you might need to disable driver signature enforcement)
Two options for flashing:
1)
My Full Stock ROM already pre-prepared for flashing:
Patched ROM
No need for extra prep here! you should just be able to load the scatter
2)
My custom patched TWRP stock rom: recovery-verified.img
Blackiew's stock rom: stock rom
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
Once you've done with the pre-prep, switch off your device, take a deep breath and you're ready to go!
Steps!
1) Load up SP Flash Tools, select the android scatter file you've downloaded in the R06 folder
2) Select Download Only (I MEAN IT, FORMATTING WILL REMOVE YOUR IMEI AND RENDER THE PHONE USELESS)
3) Deselect everything but recovery (You only want to flash this)
4) Hit download
https://pasteboard.co/HkufwZZ.png
5) Hold volume up + power and plug in your phone, keep the volume up button held
6) very quickly the flash should be complete, and you should be greeted with a big ol' green tick to verify
https://pasteboard.co/HkuiTBB.png
7) Once you're done, remove your USB cable, plug in the OTG then we proceed to flash magisk
8) Hold power + volume up until you reach the bootloader, then use the menu to select recovery
9) You *should* be greeted with the TWRP recovery screen (Which is great success! )
DON'T PANIC IF YOU CANNOT USE THE TOUCH SCREEN, the kernel I've patched is missing this, seems the driver is different between touch screens, just plug in your OTG mouse to continue from here!
10) Use your mouse to first hit cancel, we don't need to decrypt the user data storage.
11) But oh no! it's all in Russian (no problem, Next step sorts that)
12) Use your mouse to navigate the menus as shown here to change to English! (or your preferred language) Change Language
13) Click install, then navigate up folder levels until you are in the root directory
14) scroll down and click on Magisk.zip, install it, allow it to install any apps as system apps (because this will then install to the system image, not the userdata)
15) reboot the phone (if it hasn't rebooted already)
16) You should be able to boot into your usual phones OS, if you don't see Magisk listed in your phone apps, just download it from here:
Magisk Manager
17) Congratulations! You should have complete root access :laugh::laugh::laugh:
Feel free to express your thanks, or list any problems you have, but keep in mind my studies take all my life, so I may not be able to help with all the problems you have
Congrats! Would it work on the BV9000 HD version?
Hi!
From what I've seen they both run the helio p25 chip
(Just a difference in RAM size) so it should.
You're more than welcome to try.
Just keep a backup of the original ROMs recovery. If something goes wrong during the boot to recovery you can easily re flash
hi i tried both optinos but they didn't work for me
I tried the first and the second options and it was showed me same error:
ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
I tried download only, format all and download, if i install original ROM its installing without problems!
In settings-> developer options -> OEM unlocking is enabled
can someone give me tips if I'm doing something wrong. thanks
My phone is Blackview BV9000PRO-F
Hello,
i have the blackview 9000 pro Hd (not full hd)
i first tried your prepared patched rom = not working (get erorrers in step 6)
then i chose step 2 and i was thinking to use the stock rom from the NOT full hd rom
now i get a green screen from the flashing: but after rebooting in recovery nothing happens, just normal reboot then
perhaps this is not so clair for me:
- Download the stock rom, backup the recovery-verified.img in the R06 folder, and then replace it with my custom patched TWRP stock rom (file name should be the same).
- Run "CheckSum_Gen.exe" once you replaced the file, it will generate the necessary checksum to allow SP flash tools to successfully flash recovery.
the file name you posted here " My custom patched TWRP stock rom: recovery-verified.img" is ramdisk-recovery.img
i replaced the ramdisk-recovery.img... it is not clair need to replace recovery-verified.img to?
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
>
dingsje said:
Hello,
>i have the blackview 9000 pro Hd (not full hd)
>i first tried your prepared patched rom = not working >(get erorrers in step 6)
>then i chose step 2 and i was thinking to use the stock >rom from the NOT full hd rom
>now i get a green screen from the flashing: but after >rebooting in recovery nothing happens, just normal >reboot then
>perhaps this is not so clair for me:
>- Download the stock rom, backup the recovery->verified.img in the R06 folder, and then replace it with >my custom patched TWRP stock rom (file name should >be the same).
>- Run "CheckSum_Gen.exe" once you replaced the file, >it will generate the necessary checksum to allow SP >flash tools to successfully flash recovery.
>the file name you posted here " My custom patched >TWRP stock rom: recovery-verified.img" is ramdisk->recovery.img
>i replaced the ramdisk-recovery.img... it is not clair >need to replace recovery-verified.img to?
Click to expand...
Click to collapse
Hi,
I've uploaded the wrong file, the uploaded file should be recovery-verified.img.
I'm uploading a new file and will correct the link now,
Please accept my apologies ><
hyperlethalvector92 said:
>I tried the first and the second options and it was >showed me same error:
>ERROR: STATUS INSUFFICIENT_BUFFER(0XC0010007)
> tried download only, format all and download, if i install >original ROM its installing without problems!
>can someone give me tips if I'm doing something wrong. >thanks
>My phone is Blackview BV9000PRO-F
Hi, you need to unlock the OEM bootloader, if this is still locked it will prevent the flashing of custom ROMS.
I might've missed this step, will update post as necessary.
Click to expand...
Click to collapse
I already did this step:
Enable developer options-> OEM unlocking is enabled
Is that enough for this MTK phone to be unlocked the bootloader ?
And tried the both options but the results are same.
I have been unlocking bootloaders on many phones but first time MTK phones. If i try with adb commands it recognize when is in the android with command adb devices and show my device but if I try reboot bootloader and check in device manager in windows its show its connected and drives are correct but if i try to show the devices, it doesn't show any device connected
Hi,
You need to install fastboot drivers once it's in bootloader mode,
then use fastboot, not adb.
"fastboot oem unlock"
Then follow instructions.
simply doing settings -> oem unlock won't unlock the bootloader, it allows you to do so later via. fastboot
Check the original post, I've added the extra instructions sorry about the confusion!
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
zlatkomas said:
Thanks a lot. I finally succeeded to unlock the bootloader and root my phone and install the magisk.. I did without use your rom just I unlocked the bootloader and install your twrp file and after in the recovery mode i format the data and istall magic and i still have the last updated android.
I hope this it ill help to other people. Cheers
Click to expand...
Click to collapse
I'm glad ^______^
Enjoy your rooted phone
I used this video to root my bv9000 pro hd
much easier than this above, i think it works to on bv9000 pro fhd
https://www.youtube.com/watch?v=c48ISLPjn4Q
Congratulations .... I need a tip,.
And, brother, thank you very much. Worked perfectly.
But first I would like to get you a tip ..
One of the main reasons I have done all this complicated process was to be able to disable the crap of the loud music that plays when the device is started.
I want complete silence at startup.
How do I disable this ****?
Code for Huawei mobile Wi-Fi e5577s-321
Pls help unlock my Huawei mobile Wi-Fi e5577s-321
Imei
860782038163889
TWRP looping after OTA update
My dear, the procedure worked very well, until an OTA update was downloaded.
You are now looping on TWRP. How do I get out of this?
:crying:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
mackie_ma said:
help!
i missed to run wireless software update,so ROM clashed.
How can i re-install custom ROM?
Click to expand...
Click to collapse
Hi guys, lemme apologize for disappearing, life and whatnot!
For those stuck in a TWRP boot loop, simply restoring the original recovery then restarting the phone will be enough to fix the problem.
(Actually you really don't need TWRP after the phone is rooted, maybe I should update the guide?)
Many Thanks
First off, thank you for your hard work. Loved the "**** it we have an OTG cable let's use it" haha. It works fine for me.
Second, do you happen to know if someone has ported Oreo on our bv9000 ? Or do you know of any ETA ?
Thanks again,
Cheers
Anyone tried on the BV9000 Pro? Don't think mine is 'F' OR 'Fhd'.... I must have first model brought out...
Ugh.. Windows and Drivers?!?!
I keep getting Driver not Recognized in Windows 7 Pro X86.
I installed the latest vcom/usb drivers, in legacy also. No Go.
I installed from several other sources the drivers, including the Automatic Mediatek driver install. No Go.
So if anyone has a tip for me, please let me know because once more Windows is proving itself ridiculous. I can't even get to the storage of my phone. Did something change with a Windows Update that it's not allowed anymore?
I put my BV9000 Pro in OEM Unlock and USB Debugging. I backupped everything. My phone is ready for it. It's as ready as Amy having coitus with Sheldon for the first time.
Disclaimer :
YOU are choosing to make these modifications
and YOU are the only one responsible for any damages done to your device
==== Notes/Prerequisets/Links ====
* you should have already unlocked your bootloader (if not then start the process as soon as possible because it's going to take a while).
* backup your stuff, make sure you have sufficient charge just in case anything went wrong.
* download the unoffical TWRP port from Here (get the latest version)
* get the latest magisk from Here
* install device usb drivers
* set up fastboot properly Method A, Method B (using chocolaty)
- - - - - - - - - - - -
instructions :
1- shutdown your device completely.
2- enter fastboot mode by pressing and holding the Vol Down + Power Button button until you see xiaomi's mi bunny with a blue "fastboot" text underneath it.
3- connect your device to your pc via usb cable.
4- on your pc check if you have fastboot configured properly and your device recognized by typing:
Code:
fastboot devices
if it's detected then you're good to proceed to the next step.
5- flash the twrp recovery image by using the usual fastboot commands.
Code:
fastboot flash recovery recovery.img
in our case it should look something like:
Code:
fastboot flash recovery recovery-TWRP-3.3.0-0517-XIAOMI8LITE-CN-wzsx150.img
6- unplug usb cable and hold the Vol up + Power Button (don't let go of the buttons untill the devices vibrates) and let it boot to the twrp recovery you just installed.
7- if you rebooted successfully, you should be at TWRP splash screen, if greeted with a slider slide it and continue.
8- in the main menu of TWRP, go to "Install" choose the magisk zip file you downloaded and flash it, when done reboot the device.
9- congratulations friend, you're now rooted and have TWRP as your recovery Happy Flashing :highfive:
- - - - - - - - - - - -
Optional : install Orange Fox Recovery from Here (Supports Encryption and MIUI OTA updates).
- - - - - - - - - - - -
2020-02-25 Last upated and working on MIUI Global Stable 11.0.8 Pie
just in case
Is it possible to just accesss the TWRP to edit build.prop enabling camera2 Api?
If I remember is something about:
fastboot boot twrp.img
and then:
setprop persist.camera.HAL3.enabled 1
Without the need of root the device.
Thanks for the guide!
antonioli84 said:
Is it possible to just accesss the TWRP to edit build.prop enabling camera2 Api?
If I remember is something about:
fastboot boot twrp.img
and then:
setprop persist.camera.HAL3.enabled 1
Without the need of root the device.
Thanks for the guide!
Click to expand...
Click to collapse
Sorry for the late reply
No problem
+
I'm not really sure if you could do it with TWRP's built in file manager without root
You could try
I've seen people do it with adb but haven't had the chance to try it yet
take a look here : https://www.google.iq/amp/s/amp.red...gswg/camera2_api_without_root/#ampf=undefined
And here (this has some very useful info)
https://www.google.iq/amp/s/forum.x...o/guide-enable-camera2-api-root-t3690366/amp/
malek_anas_97 said:
Sorry for the late reply
No problem
+
I'm not really sure if you could do it with TWRP's built in file manager without root
You could try
I've seen people do it with adb but haven't had the chance to try it yet
take a look here : https://www.google.iq/amp/s/amp.red...gswg/camera2_api_without_root/#ampf=undefined
And here (this has some very useful info)
https://www.google.iq/amp/s/forum.x...o/guide-enable-camera2-api-root-t3690366/amp/
Click to expand...
Click to collapse
Thank you for the reply. I've done it in Mi A1 but I don't know if it's the same procedure because of the MIUI. One of the links says that we have to change something in kernel to do it.
It would be good expert people try it to see what method works. It's sad that the Mi 8 Lite doesn't have a proper forum until now.
antonioli84 said:
Thank you for the reply. I've done it in Mi A1 but I don't know if it's the same procedure because of the MIUI. One of the links says that we have to change something in kernel to do it.
It would be good expert people try it to see what method works. It's sad that the Mi 8 Lite doesn't have a proper forum until now.
Click to expand...
Click to collapse
i enabled it in stock miui by adding "persist.camera.HAL3.enabled=1" to my build prop and then rebooting
malek_anas_97 said:
i enabled it in stock miui by adding "persist.camera.HAL3.enabled=1" to my build prop and then rebooting
Click to expand...
Click to collapse
Thanks for the reply.
What method did you use to change build.prop?
Can't find a similar guide for the Mi 8, is it the same process as for the lite ?
antonioli84 said:
Thanks for the reply.
What method did you use to change build.prop?
Click to expand...
Click to collapse
i'm rooted with magisk
with a file manager, i use this one https://play.google.com/store/apps/details?id=nextapp.fx&hl=en
+
this addon https://play.google.com/store/apps/details?id=nextapp.fx.rr
the file is in /system/build.prop
webvan said:
Can't find a similar guide for the Mi 8, is it the same process as for the lite ?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=YI2CtIIPVaI
malek_anas_97 said:
i'm rooted with magisk
with a file manager, i use this one https://play.google.com/store/apps/details?id=nextapp.fx&hl=en
+
this addon https://play.google.com/store/apps/details?id=nextapp.fx.rr
the file is in /system/build.prop
Click to expand...
Click to collapse
Thank you man. I would like to know if anyone can do the trick without root. I've bought a Mi 8 Lite for my wife and it would be nice to her receive the updates from Xiaomi and use the GCam the same way she receives in Mi A1.
malek_anas_97 said:
7- if you rebooted successfully, you should be at TWRP splash screen
you will be greeted with a slider slide it and continue
Click to expand...
Click to collapse
Hi Malek,
When you first boot to TWRP, were you asked for the decryption password? If yes, did you just format data to skip this? I was asked for the password and my screen PIN did not work. Just wondering if there is no other choice that to format data.
Official Xiaomi Mi 8 Lite (Platina) telegram group 24/7 support and latest ROM news posted here first!
Rules :
1 - English only.
2 - Be polite.
3 - Don't spam.
Gp Link : https://t.me/joinchat/DXcdlA0r5XYI-ooJlO8IlQ
Please Join
chan200606 said:
Hi Malek,
When you first boot to TWRP, were you asked for the decryption password? If yes, did you just format data to skip this? I was asked for the password and my screen PIN did not work. Just wondering if there is no other choice that to format data.
Click to expand...
Click to collapse
to this point i don't really understand how encryption works on this device
it's on by default i guess
so what i finally did the other day to be kinda sure of what's happening
i flashed stock rom in Mi Flash with the clean all option checked
i set up the phone for the first time without setting any fingerprint or security or anything
after that i flashed twrp
from twrp i flashed dm verity and encryption disable
get it from here https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
(make aure to read the first post)
then formatted data
after that the booted up and i set it up normally
and then booted to twrp again to flash latest magisk
now when i check if my device is encrypted using this adb command "adb shell getprop ro.crypto.state"
i get "unencrypted"
so i guess it works? i don't know lol
malek_anas_97 said:
i flashed stock rom in Mi Flash with the clean all option checked
i set up the phone for the first time without setting any fingerprint or security or anything
after that i flashed twrp
from twrp i flashed dm verity and encryption disable
Click to expand...
Click to collapse
It looks like your phone was not encrypted (or was encrypted with MIUI's default password) when you flashed TWRP, as you had clean flashed stock then set up without setting security. That you could start TWRP to flash "dm versity and encryption disable", without being asked to input a password first, shows that TWRP was able to handle the default encryption (or no encryption) of the clean MIUI install.
In my case I already have a screen PIN set up on my phone before trying to install TWRP, and this version of TWRP can't handle it. Another difference is that I have not actually flashed TWRP onto the phone but have merely booted to TWRP via fastboot. I wouldn't have thought that this would affect TWRP's ability to decrypt the DATA partition though.
In hindsight I should have just done the minimum setup after the phone was wiped by the bootloader unlocking process before installing TWRP. I guess that unless there is another version of TWRP out that can handle the screen PIN encryption, my only option is to wipe clean the phone so that I can repeat what you did. However, now that I have reinstalled everything on the phone, I am a bit reluctant to do this just to get root. I think I will wait until there is an AOSP ROM available and do the wipe/format at the time of switching. Hopefully I don't have to wait too long!
chan200606 said:
In my case I already have a screen PIN set up on my phone before trying to install TWRP, and this version of TWRP can't handle it. Another difference is that I have not actually flashed TWRP onto the phone but have merely booted to TWRP via fastboot. I wouldn't have thought that this would affect TWRP's ability to decrypt the DATA partition though.
Click to expand...
Click to collapse
An update: I've now got over this encryption thing. It is indeed the screen PIN that was causing me problems. While I had tried removing the PIN and all fingerprints last time, I had powered down the phone immediately after removing the PIN and booted into fastboot mode. Today I thought I better try it one more time: after removing the PIN, reboot the phone to system first before powering it down and restarting in fastboot mode. This cycles the phone system at least once without the PIN so hopefully any traces of the PIN would really be wiped. And indeed it works - the booted TWRP (i.e. not flashed to phone) has no problems reading my phone and I could install Magisk.
So I now have stock recovery + Magisk on my Mi8 Lite, which is the minimum I wished to do to it. Maybe at a later date I would flash TWRP onto the phone as well.
i cant unlock my mi 8 lite, say user portrait scores too low or black, i activate all need, oem, usb, sync device. no work, any help?
Everything is ok for global rom.
For the language twrp asked directly at first launch for it and you don't need anymore magisk, you can install it directly from twrp. ( advance/install root ) it'll install the version 17.1 and you can update it from the app on the phone.
No problem for reboot into twrp ( volume up + power) even with fingerprint.
kax001 said:
i cant unlock my mi 8 lite, say user portrait scores too low or black, i activate all need, oem, usb, sync device. no work, any help?
Click to expand...
Click to collapse
i really have no idea why this is happening to you
i searched online and it seems like you're not the only one having this
vonclutch said:
Everything is ok for global rom.
For the language twrp asked directly at first launch for it and you don't need anymore magisk, you can install it directly from twrp. ( advance/install root ) it'll install the version 17.1 and you can update it from the app on the phone.
No problem for reboot into twrp ( volume up + power) even with fingerprint.
Click to expand...
Click to collapse
yeah i know there's no problem in turning the phone off then rebooting manually with the buttons
but i was talking about using "fastboot reboot recovery" command to reboot to recovery from fastboot directly
anyways glad everything worked for you friend : )
Hello everyone, after struggling for a few hours I managed to finally disable force encryption in my phone (so that TWRP could backup the data partition).
I'd like to write a quick list of what I did in the form of a guide to unlocking the bootloader, installing TWRP and getting root with Magisk. I'm just a user, not a developer and this guide is brief, it's not a detailed tutorial and does not include trivial steps (like how to install drivers for your OS).
Warnings: Although small, there is always the chance this bricks your phone. I take no responsibilities.
This will factory reset your phone so back up everything before you start.
My phone is Lenovo S5 (K520) Global version (see screenshot) I don't know if this will work for other firmwares.
Prerequisites:
Install Phone, ADB and Fastboot drives. You can get ADB and Fastboot binaries from here:
https://forum.xda-developers.com/showthread.php?t=2588979
Download this archive:
http://www.mediafire.com/?4dcvzw1hdmzfn10
It contains all the files used in this guide.
Alternatively, download all the files used from their sources.
You will need an SD card or a USB flash drive with an OTG adapter.
Copy the following files to it:
A. "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3817389 )
B. "Magisk-v18.0.zip"
(Downloaded from http://forum.xda-developers.com/showthread.php?t=3473445 )
C. (optional) "\stock\boot.img"
(Downloaded from the global firmware @ 4pda)
If you chose to use Micro SD card, you can insert it now.
Note: I know there is a way to push these files directly to TWRP from PC through USB instead of using SD Card/Flash drive but I've never tried it.
Lets start:
1. Go to 'Settings>About phone' and tap on "Lenovo version" several times until developer options are enabled.
2. Go to 'Settings>System>Developer options' and enable "OEM unlocking" (Note: for me this option was greyed out and I had to connect to wifi and wait for a minute or two).
Optional: Enable "USB debugging" if you wish to enter fastboot via ADB.
3. Turn off the phone and press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" on the phone screen (alternatively, don't turn off the phone and instead enter fastboot mode via ADB (adb.exe reboot bootloader)).
4. Connect the phone to the PC via USB and open a command prompt in the location that you installed fastboot binary to.
Type (after each command press enter):
Code:
fastboot devices
To verify that the phone is recognized. And if it is type:
Code:
fastboot oem unlock
Now on the phone LCD navigate to "Yes" with volume buttons and press power to select it.
Your phone will factory reset, this will take a few minutes. Let it finish.
5. Put the TWRP image in your fastboot path. I used "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" downloaded from this URL:
https://forum.xda-developers.com/android/development/lenovo-s5-k520-twrps-t3863860
But I included 2 more files that I found (I did not try them).
6. Enter fasboot mode again and type:
Code:
fastboot flash recovery recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img
(Substitute "recovery-twrp-3.2.3-crn-seoul(v3.2.3-1).img" with the recovery filename of you choice)
7. If successful, disconnect the USB cable and enter Recovery mode, do not turn off or reboot the phone because upon restart the phone will revert to stock recovery (I.E. delete TWRP).
To enter Recovery mode press and hold 'Volume down'+'Power' buttons until you see "fastboot mode" and from there choose "Recovery mode" with the volume buttons and confirm with the power button.
(Alternatively, you can try holding 'Volume up'+'Power' to directly enter Recovery mode but I found it a little finicky)
8. In TWRP, swipe to allow changes. Press cancel when asked for a password to decrypt data.
If you chose to use a USB flash drive with an OTG adapter, connect it and mount it (Mount>usb-otg).
9. Go to Wipe>format data, type "yes" and confirm (if you have any data like installed apps, contacts etc., it will be deleted).
10. Go to Install and install "Disable_Dm-Verity_ForceEncrypt_12.16.2018.zip".
The files will be in (/external_sd/ or /usb-otg/).
11. Install "Magisk-v18.0.zip"
Important note: If you want to keep encryption (if you don't care if TWRP can't access /data/) and just obtain root, skip steps 9 and 10.
12. Reboot to system and wait for a few minutes for the initial setup.
If for some reason boot fails (nothing happens after 10 minutes) and you can still enter TWRP (hold 'Volume up'+'Power'), then you can revert the changes by restoring the stock boot image (TWRP>Install>Install image>boot.img - put a checkmark on "boot").
If this worked for you, please tell us by replying to this thread.
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
C4lculated said:
I also wanted to root but I didn't want to run a bunch of unknown programs (from XN Logos), so I managed to install TWRP and root with magisk. I wrote a guide on how to do it:
https://forum.xda-developers.com/ge...ide-lenovo-s5-k520-twrp-root-decrypt-t3882402
Click to expand...
Click to collapse
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
does anyone enable lte bands, 4 and 28?
just bought this phone, currently on shipping..
I'll first try with twrp + aosp 9 GSI
Hi man, have you upgrade to gsi
acost91 said:
Thanks a lot man. This phone is a beast in quality/price when talking about hardware. Costs a bit more than 100€ and has the same hard than others at 180-200€ at least. Bad thing is software but with TWRP and root everything is possible . Just found what project treble is, amazing possibilities. Can't beliebe nobody replied yet to yor post. Its a great guide and you show all the sources from where your downloads come. As you said in another thread its better this way so people can trust your content more:
I am yet waiting for my Lenovo S5 to arrive but I will give this guide a try. I was about to follow XN logos (stupdroid) guide/software but I prefer yours. Just one question... have you checked whether the TWRP v3.2.3 (latest) from dmilz make proper working backups? Can I trust that a full backup will be loaded correctly after installing any unofficial ROM, to go back to stock if necessary? I made once the mistake of relying a TWRP and later I found out that one was ok for flashing but didn't create working backups. I asked him also the same question, but I guess you also tried yourself to make a backup and restore from it using TWRP.
Next step will be to flash an Android 8.1 or 9 GSI rom (did I already say I'm amazed by GSI/project treble roms? just found about them last days). I will update you about my luck following your guide
Click to expand...
Click to collapse
Kindly drop the procedure am hitting brick with all the method i used .????????
Stock firmware lenovo k520
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Working on S5 Pro too?
Hi! Can it work on S5 Pro too? I really want to root this device and I don't find out a way to get this happening. Thanks!
Does this work for s5 pro l58041?
Thanks
B4ph0 said:
I have tried your method on ROM that is based on China and also globally, and TWRP was successfully installed, and I have also tried several Rom GSI, and only AOSP Extended is successful, but with Bluetooth bugs it cannot be turned on, if others want flash files and stock firmware for k520, just let me know, thanks.
Click to expand...
Click to collapse
Hi! Sorry for offtopic!
Could you please PM me the link on AOSP extended image which you installed. Thank you!
Hello! Did somebody managed to install GCAM to Lenovo S5? I'm trying and I can;t do this, magisk modules are not loading...
so far I've used 2 alternative rom and works fine, aosp & octopus os, especially octopus os
I need some help..
Did anyone had lenovo s5 persist.img..
I lost my persist afer flashing global rom.208st via qfil..
I check the rom has no persist.img
Please visit to https://youtu.be/wbpV59kutJM for tutorial flash and upgrade Lenovo S5 in YouTube
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
has anyone achieved unlocking bands in this phone?
Please port miui 11 9.10.30 mi-room pie 9.0 redmi note 4x SD625 to lenovo S5.
https://megaroms.net/miui-11-9-10-30-stable-port-for-redmi-note-4-4x/
https://sourceforge.net/projects/miui-ports.whats-new.p/files/mido/miroom/
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
Suryo75 said:
hello guys, i always get into download mode,after press reboot system (twrp), any solution for my problem ?
Click to expand...
Click to collapse
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
jychung93 said:
After unlocking bootloader, is there anyway to remove the hideous "software can't check for corruption" warning? Thanks.
---------- Post added at 01:44 AM ---------- Previous post was at 01:39 AM ----------
This means no rom is installed in your phone. Either you accidentally wipe system in twrp, or the rom is corrupted.
Download the deodexed stock rom below and flash with twrp. Should fix your problem.
https://drive.google.com/open?id=13tRqo5eSpRiVJwKiA-iSj2GyIF353ATQ
Click to expand...
Click to collapse
thank you i'll try
Could you plz make tutorial about getting back to stock unroot...thx
Twrp gone
Hello sir thank you for this wonderful tutorial,
But I have a problem , after booting to TWRP , then boot to system after that when I try to go back to recovery mode TWRP , twrp is gone , stock recovery back
I tried to root my phone and added magisk zip and apk in the internal storage, then rebooted but TWRP didn't showed up like in the tutorials. I could enter fastboot and could actually open the phone before I flash twrp by one click something. Then it turned into a bootloop. But I could enter the fastboot before I flash "begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.00_9.0_eea" by MiFlash but I chose to save user data. Then I came up with an error:Not catch checkpoint (\$fastboot -s.*lock). Now it is in a bootloop and I cannot open fastboot again. The account is unlocked already, and MiFlash sees the device when I click service help in recovery mode and connect it via USB. Is there a way to recover my data in it? Please help me, I had at least 50 GB of pictures that I didn't backup I saw someone says he could upload twrp using LWUP, then got all the data to PC somehow, but I don't really have any knowledge of it and I actually didn't know how to do that. I am just a regular user. If there is a way please share with me. At least I want to open my phone without a root.
Why do developers keep writing all those advices : "backup your data beforehand"? People seem unable to read it. Hate to say it, but this should be your lesson. That error is normal, the mi flash program shows that error because you didn't lock the bootloader again.
AmmarNaN said:
I tried to root my phone and added magisk zip and apk in the internal storage, then rebooted but TWRP didn't showed up like in the tutorials. I could enter fastboot and could actually open the phone before I flash twrp by one click something. Then it turned into a bootloop. But I could enter the fastboot before I flash "begonia_eea_global_images_V10.4.5.0.PGGEUXM_20191007.0000.00_9.0_eea" by MiFlash but I chose to save user data. Then I came up with an error:Not catch checkpoint (\$fastboot -s.*lock). Now it is in a bootloop and I cannot open fastboot again. The account is unlocked already, and MiFlash sees the device when I click service help in recovery mode and connect it via USB. Is there a way to recover my data in it? Please help me, I had at least 50 GB of pictures that I didn't backup I saw someone says he could upload twrp using LWUP, then got all the data to PC somehow, but I don't really have any knowledge of it and I actually didn't know how to do that. I am just a regular user. If there is a way please share with me. At least I want to open my phone without a root.
Click to expand...
Click to collapse
I dont know what to say man. Next time just follow guide or youtube guide.
Now you can try flash any Miui version which have twrp decryption support and try to back up things you want.
You can try flash twrp suitable with your version now to check if you can backup or not
Can I just flash twrp? But how? I don't even know how to do it I just followed mi video on youtube
AmmarNaN said:
Can I just flash twrp? But how? I don't even know how to do it I just followed mi video on youtube
Click to expand...
Click to collapse
For Miui 12.0.x or Miui 12.5.x just search youtube:
Twrp miui 12.0 begonia (and find video about miui 12, not 12.5)
Twrp miui 12.5 begonia
For older miui version i didn't test myself so i won't send here. You can try flash these type of version and twrp to check and hope it not encryption error.
Kirasu2080 said:
For Miui 12.0.x or Miui 12.5.x just search youtube:
Twrp miui 12.0 begonia (and find video about miui 12, not 12.5)
Twrp miui 12.5 begonia
For older miui version i didn't test myself so i won't send here. You can try flash these type of version and twrp to check and hope it not encryption error.
Click to expand...
Click to collapse
It doesn't show fastboot all the tutorials enters fastboot then continues. How to make it without fastboot mode do you have any idea? I guess on Xiaomi we need to authorize something which service takes a payment for entering the account.
AmmarNaN said:
It doesn't show fastboot all the tutorials enters fastboot then continues. How to make it without fastboot mode do you have any idea? I guess on Xiaomi we need to authorize something which service takes a payment for entering the account.
Click to expand...
Click to collapse
Hold power + volume down until it turn off and come to fastboot mode