Related
Hi guys, I'm trying to install RomAur onto my device http://forum.xda-developers.com/showthread.php?t=2641067.
1st step is to root the device ON LOCKED BOOTLOADER which leads me to http://forum.xda-developers.com/showthread.php?t=2634196.
And from that thread I've followed the instructions, placed my 2 .ftf files in the firmwares folder within Flashtool.
At which point I've run into 2 problems. 1st, the Z1c isn't recognised by the tool. So I tried to tell the program that it's just a Z1.
Next problem occurs when I try to flash the device, my specific firmware doesn't show up in the Firmware Selector. The only thing showing is X10 V1 BLRelock, which was already there by default.
Could someone give more detailed instructions as to how to flash using Flashtool please.
If you want to unlock the bootloader make sure to back up TA partition!
Check out my guide, it's more detailed: http://forum.xda-developers.com/showthread.php?p=50176658 (rooting is the same process as Darkimmortal's guide)
See step 8, you probably didn't put the ftf file in the correct folder.
zxz0O0 said:
If you want to unlock the bootloader make sure to back up TA partition!
Check out my guide, it's more detailed: http://forum.xda-developers.com/showthread.php?p=50176658 (rooting is the same process as Darkimmortal's guide)
See step 8, you probably didn't put the tft file in the correct folder.
Click to expand...
Click to collapse
Thanks for replying.
I can't seem to manually update the z1c drivers, device manager keeps telling me i have the latest driver. So I skip that step and carry on.
Stuck at 8. I've tried putting the ftf in /firmware as well as other locations and changing the directory that flashtool will search.
Something else is wrong, any other suggestions?
sllik said:
Thanks for replying.
I can't seem to manually update the z1c drivers, device manager keeps telling me i have the latest driver. So I skip that step and carry on.
Stuck at 8. I've tried putting the ftf in /firmware as well as other locations and changing the directory that flashtool will search.
Something else is wrong, any other suggestions?
Click to expand...
Click to collapse
You can see the source folder in the top of the Firmware Selector. Default is "C:\Flashtool\firmwares". Make sure your file is inside there and ends with ftf.
Also check if the file has the correct hash:
SO-02F_14.1.H.1.281_docomo.ftf
MD5: 259221BCEEB54F3AD7F9721111E0EF1D
SHA1: 365C185A3D5B8DA64B8B84ECBEE62DD882739E4A
zxz0O0 said:
You can see the source folder in the top of the Firmware Selector. Default is "C:\Flashtool\firmwares". Make sure your file is inside there and ends with ftf.
Also check if the file has the correct hash:
SO-02F_14.1.H.1.281_docomo.ftf
MD5: 259221BCEEB54F3AD7F9721111E0EF1D
SHA1: 365C185A3D5B8DA64B8B84ECBEE62DD882739E4A
Click to expand...
Click to collapse
Bad hash. Thanks for the help, redownloading now, hope it succeeds this time.
Please let me know if it worked after redownloading, I will add it to the guide :good:
Stuck on step 13.
Run Z1C-lockeddualrecovery(...)installer.zip's install.bat and select option 3 [Installation on unrooted ROM] ( URL goes here )
I'm running the .bat file and selecting option 3 but I get stuck with the text saying 'Waiting for Device, connect USB cable now..."
I can't turn my phone on, well I can't tell if it's on or off since it just stays black, but pressing volume up and down vibrates the phone.
sllik said:
Stuck on step 13.
Run Z1C-lockeddualrecovery(...)installer.zip's install.bat and select option 3 [Installation on unrooted ROM] ( URL goes here )
I'm running the .bat file and selecting option 3 but I get stuck with the text saying 'Waiting for Device, connect USB cable now..."
I can't turn my phone on, well I can't tell if it's on or off since it just stays black, but pressing volume up and down vibrates the phone.
Click to expand...
Click to collapse
Make sure your phone is off (hold volume up and power button 5seconds, if the phone was on it will vibrate 3times and shut down).
Then power on your phone normally (hold power button until there is a slight vibrate). The screen will stay black, this is normal.
Plug in the USB cable to your pc and continue with step 13.
If it still says 'Waiting for device' you either:
a) don't have the drivers installed (check in device manager if something shows up when the phone is connected)
b) didn't correctly execute step 10
c) selected some wrong options in step 11
If it's b) or c), best solution is to start from scratch.
zxz0O0 said:
Make sure your phone is off (hold volume up and power button 5seconds, if the phone was on it will vibrate 3times and shut down).
Then power on your phone normally (hold power button until there is a slight vibrate). The screen will stay black, this is normal.
Plug in the USB cable to your pc and continue with step 13.
If it still says 'Waiting for device' you either:
a) don't have the drivers installed (check in device manager if something shows up when the phone is connected)
b) didn't correctly execute step 10
c) selected some wrong options in step 11
If it's b) or c), best solution is to start from scratch.
Click to expand...
Click to collapse
Ok so I managed to sort it out by starting from scratch.
I think it would be helpful to mention in your guide that the phone is blank from steps 13 through to 15. Thanks for the help, appreciate it.
Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.
chanwt12000 said:
Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.Hi, I am a Nexus 7 user and was tried to root my device using the Toolkit v1.8.2
I am not experience in rooting Android machine, this was my first time and unsuccessful. My device is now could not be started up.
The following is all information I summarized for this exercise, and would like to seek all advice on the followings.
--1 Is my device "recoverable" if yes, how and what do I need to do please?
--2/ or is it definitely "bricked" so I have no chance to recover it at all.
I am totally in-familiar with rooting machine and I have no access to Linux machine.
Any advice is welcome.
Thx in advance.
Machine: Nexus 7 v2- wifi version Android 4.4.2, Build - KOT49H
Computer: Windows 7 64 bit system
Nexus Root Toolkit v1.8.2
Worked procedure:
1/ Follow the "Initial Setup - Full Driver Installation Guide- Automatic + Manual"
Step 1 to Step 4, install the drivers on the computer. and "Full Driver Test" passed
2/ Click "Unlock", pressed "Y" to proceed. - Device went into a screen asking me to select and confirm, I used the "Vol +" to select "yes" and pressed "power" to confirm, but nothing happened on both computer and device after the "power" switch was pressed. Instead, it freeze the device. nothing is responding even after 10 minutes.
3/ I have pressed the "power button again for 5 sec. and device shutdown to black screen.
4/ Since then, every time I try to start the device, the machine first show a "Google" , then a "rotating flower pattern" and won't started. i.e. - "the flower pattern" keeps looping.
5/ on the computer side, no matter what command is given in Nexus Root Toolkit, a notification of ADB device was not found error comes up.
Consequence
A) Device can be switched on and off by pressing "power" button. when switch on, it display "Google" , then a rotating flower pattern, and never end.
Switch the power button for 5 sec again, device switch off.
B) When device is off, press 'power' and "vol -" will switch on the device to a menu with a robot lay down, options "Restart bootloader", "Recovery mode", "Power off" and "Start" can be selected.
C) For "restart bootloader" the screen goes black for 2 sec, then the menu appear again with "Start" option. i.e.- no error no message
D) For "Start " - the device just just act like normal start, end up in a looping rotating flower pattern.
E) For " Recovery mode" - device screen goes black for 3 sec. show "Google" then show a dead robot with an exclamation mark on it, message " No command" is showing. - After awhile, device restarted and end up in the rotating flower pattern.
F) When plugged in, Window 7 can detect the device, when teh device is in the menu, "Android Bootloader Interface" is shown in Windows Device manager, when the device is starting, " Nexus 7" is detected in Windows Device manager but not both.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=2741375&stc=1&d=1399986292
http://forum.xda-developers.com/attachment.php?attachmentid=2741374&stc=1&d=1399986292
http://forum.xda-developers.com/attachment.php?attachmentid=2741373&stc=1&d=1399986292
I'll take up the task to help you. You are not bricked. You are stuck in something called a bootloop, which is basically when the device enters the boot sequence, but never finishes. The flower pattern that you are looking at us called the boot animation. The computer never recoginizes the tablet through ADB because the tablet never gets to that point.
The screen with the Android laying on his back is actually the bootloader itself. That's why restarting the bootloader brings you to the same screen. I actually want you to be in the bootloader screen. You already have the Nexus 7.2 drivers, so you're ahead of the game.
You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
You need to boot into the bootloader, and run the command:
fastboot flash recovery <recoveryname>.img
This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Dear aarsyl,
Thx for your help and it is much better to know my device is not "bricked". Thx again!
Thx for your detailed explaination and I feel much better by knowing a little bit more on what is going on.
>>>>You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
[I also found it in my computer already .\WugFresh Development\data\Recovery_Custom\TWRP
but I downlaod it again from your link and put this file in the same directory where I find the fastboot.exe and adb.exe, which in my case is .\WugFresh Development\data\ ------ done.]
>>>>You need to boot into the bootloader, and run the command:
[- I supose you refer to my Nexus 7, so I will switch it on with the "power button + vol -" button. and get it into the bootloader.]
>>>>fastboot flash recovery <recoveryname>.img
[Here I got an query, what image file I need to use? is it the <openrecovery-twrp-2.7.0.0-flo> ? Do I neeed to run it as an adminstartor in Window 7?
so, do u mean I need to type: fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img ?
is it right?--(A)
if not, then I am not sure what recovery file to be used!
I do not have any other img file in package I downloaded previously
>>>>This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Not quite understand it this bit, but as you say. it can wait later.
So assume I do the "fastboot flash recovery <recoveryname>.img and get the TWRP on the Nexus 7.
What do I expect to see from the nexus screen. Does it have any note saying completed, or shuold I expect a reboot of the Nexus.
I think one of the problem dealing with these kind of thing is lack of acknowledgment fromt eh machine so we do not know if the operation is successful or not.
chanwt12000 said:
Dear aarsyl,
Thx for your help and it is much better to know my device is not "bricked". Thx again!
Thx for your detailed explaination and I feel much better by knowing a little bit more on what is going on.
>>>>You also need to visit here to download TWRP 2.7. You also need to put the file in the same directory as the fastboot and adb files.
[I also found it in my computer already .\WugFresh Development\data\Recovery_Custom\TWRP
but I downlaod it again from your link and put this file in the same directory where I find the fastboot.exe and adb.exe, which in my case is .\WugFresh Development\data\ ------ done.]
>>>>You need to boot into the bootloader, and run the command:
[- I supose you refer to my Nexus 7, so I will switch it on with the "power button + vol -" button. and get it into the bootloader.]
>>>>fastboot flash recovery <recoveryname>.img
[Here I got an query, what image file I need to use? is it the <openrecovery-twrp-2.7.0.0-flo> ? Do I neeed to run it as an adminstartor in Window 7?
so, do u mean I need to type: fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img ?
is it right?--(A)
if not, then I am not sure what recovery file to be used!
I do not have any other img file in package I downloaded previously
>>>>This should get TWRP onto your device. You can then download a rom of your choice to put on the tablet. Since you will not have access to place files on the device through USB, you will have to sideload it. First, let's get recovery working, then come back to me if you need help sideloading the rom through ADB while in recovery.
Not quite understand it this bit, but as you say. it can wait later.
So assume I do the "fastboot flash recovery <recoveryname>.img and get the TWRP on the Nexus 7.
What do I expect to see from the nexus screen. Does it have any note saying completed, or shuold I expect a reboot of the Nexus.
I think one of the problem dealing with these kind of thing is lack of acknowledgment fromt eh machine so we do not know if the operation is successful or not.
Click to expand...
Click to collapse
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I decided to have a go with the downloaded twrp img file.
I launched the command " fastboot flash recovery openrecovery-twrp-2.7.0.0-flo.img" from a command window as an adminstrator.
The command failed with an error saying (remote: Bootloader is locked)
And when I check the Nexus 7 screen, it does said "Locked Status - locked" in the last line.
photo showing both the computer and teh Nexus 7 screen.
Oh, I hadn't realized that you were still locked. No wonder you're not getting anywhere.
Reboot into the bootloader, and run:
fastboot oem unlock
Follow the screen instructions to unlock the bootloader, then run the command to flash the recovery. I advise changing the recovery name to something shorter and simpler, like twrp27flo.img, for example.
aarsyl said:
Oh, I hadn't realized that you were still locked. No wonder you're not getting anywhere.
Reboot into the bootloader, and run:
fastboot oem unlock
Follow the screen instructions to unlock the bootloader, then run the command to flash the recovery. I advise changing the recovery name to something shorter and simpler, like twrp27flo.img, for example.
Click to expand...
Click to collapse
Hi, Nice to have reply from you again.
Ammm. I switch on the device to the bootloader alright. run teh command "fastboot oem unlock"
On teh command window, it said" < waiting for device>
and there is no visible change on the device screen.
It already last for 10 minutes now.
I do noted that both windows are freezed and do not respond to key press and button press respectively. No responds on both the device and computer.
How lond does this process take to show the mentioned "screen instruction"? I don't see one!
chanwt12000 said:
Hi, Nice to have reply from you again.
Ammm. I switch on the device to the bootloader alright. run teh command "fastboot oem unlock"
On teh command window, it said" < waiting for device>
and there is no visible change on the device screen.
It already last for 10 minutes now.
I do noted that both windows are freezed and do not respond to key press and button press respectively. No responds on both the device and computer.
How lond does this process take to show the mentioned "screen instruction"? I don't see one!
Click to expand...
Click to collapse
wow.. it is unlocked now!
Should I continue to use the "fastboot recover command with TWRP file" as per your advise or should I continue to use the "Root" command in NexusRoot Toolkit ??
It is very happy to see there is progress.. Thx...
please keep coming...
I would go with using fastboot to install TWRP. In truth, to truly "root" your device, you actually need a working rom on the device. Otherwise, rooting will be in vain. Unlocking the device was the most important.
aarsyl said:
I would go with using fastboot to install TWRP. In truth, to truly "root" your device, you actually need a working rom on the device. Otherwise, rooting will be in vain. Unlocking the device was the most important.
Click to expand...
Click to collapse
Hi again,
Yes. my device is now boot up as brand new.
One side observation though, every time I issue command through window 7 in a command window, everything will freeze up, (not remember if I unplugged the device) until I press the power button to restart the Nexus 7. Same for the last time when i did the unlock and this time recovery.
The hesitation was how do I know when to do this, was worrying there is still some communication between the two machines if I unplug or interfer, may just disturb the communication and corrupt files. -- I normally give it some 10 minutes before I do the unplug and restart. any comment or advice?
Anyway, the device is now up and running. What is the status now? is it with the original version of software? or TWRP version or what?
The device is now remain "unlocked" - is it ok or I need to lock it again?
You have mentioned to download a "Rom", what about it, it is only need if i want to continue to "root " the device?
Sorry for so much question.
I am so happy to see it comes alive again but really would like to understand the current status of it.
Thank again. aarsyl
To be honest, I'm not entirely sure what the status of your device is right now. I was under the implication that you had no Rom on the device. Since you are trying to root for the first time, then yes, you are on the stock software that comes with the device. If you search your app drawer and find the SuperSU app, then you are already rooted, my friend. If it is not there, then search for SuperSU 1.94 in Google, and download the zip file. Then reboot into recovery and flash it.
In other news, I am happy that you got your device working, and I am more than happy to help. The only thing that I don't do is recommend roms. I encourage users to explore different roms for themelves.
[b]AarSyl[/b] said:
To be honest, I'm not entirely sure what the status of your device is right now. I was under the implication that you had no Rom on the device. Since you are trying to root for the first time, then yes, you are on the stock software that comes with the device.>>> since you mentioned I probably have no rom on the device...and you also mentioned "stock software with my device"..I think these are 2 different things right? because i always thought they are the same thing.
If you search your app drawer and find the SuperSU app, >>>App drawer, do you refer to the Apps Tab under Setting? I don't have SuperSU in there.
then you are already rooted, my friend. If it is not there, then search for SuperSU 1.94 in Google, and download the zip file.
Then reboot into recovery and flash it. >>>>I have to say you lost me, do u mean use the ""fastboot flash recovery <Super SU file>.img" command?
In other news, I am happy that you got your device working, and I am more than happy to help. The only thing that I don't do is recommend roms. I encourage users to explore different roms for themelves.>>>No problem, I shall be looking out for that
Click to expand...
Click to collapse
Well, sure I will continues to look up the information from the basic, but at the moment Would you please enlight me for the following 2 questions
1/ Should I uncheck or check the USB debugging tab under Developer options - it will be very good if you would like to explain a little on what it does, so I will have a more l\idea what it does when when do i need them.
2/ As i said, teh device is now unlocked, is it ok to leave it unlock or should i have it lock? - again if you would explain a little more on this that will be marvest.
cheers
chanwt12000 said:
Well, sure I will continues to look up the information from the basic, but at the moment Would you please enlight me for the following 2 questions
1/ Should I uncheck or check the USB debugging tab under Developer options - it will be very good if you would like to explain a little on what it does, so I will have a more l\idea what it does when when do i need them.
2/ As i said, teh device is now unlocked, is it ok to leave it unlock or should i have it lock? - again if you would explain a little more on this that will be marvest.
cheers
Click to expand...
Click to collapse
I'm sorry for the long delay. I got locked out trying to log in after I changed my username twice, and it just got messy for me. At any rate....the SuperSU zip file is to be flashed through recovery. When you boot into recovery, select Install, then navigate through the device to find the folder that the file is located. Follow the screen directions to flash items.
USB Debugging needs to be checked for ADB to work, so.....yeah....leave it on.
You don't have to relock your device unless you have to bring it back to the store for repairs. It only stops you from making changes in the bootloader, such as flashing new recoveries, and I think that most fastboot commands might be blocked. I have never tried to use fastboot on a locked device, so I really don't know. Leaving the device unlocked doesn't make it vulnerable or anything, at least to my knowledge.
AarSyl said:
I'm sorry for the long delay. I got locked out trying to log in after I changed my username twice, and it just got messy for me. At any rate....the SuperSU zip file is to be flashed through recovery. When you boot into recovery, select Install, then navigate through the device to find the folder that the file is located. Follow the screen directions to flash items.
USB Debugging needs to be checked for ADB to work, so.....yeah....leave it on.
You don't have to relock your device unless you have to bring it back to the store for repairs. It only stops you from making changes in the bootloader, such as flashing new recoveries, and I think that most fastboot commands might be blocked. I have never tried to use fastboot on a locked device, so I really don't know. Leaving the device unlocked doesn't make it vulnerable or anything, at least to my knowledge.
Click to expand...
Click to collapse
Thx for your advices AarSyl,
I have successfully root the device and get the Super user app running by following one of tutorial video.
For the first time, when I start at teh bootloader and conduct a "Recovery", it shows a dead robot again but without "no command". I have to redo the fastboot command in the command window with the TWRP recovery file once again. (but this time is very smooth no need to unplug cable that sorts of thing) then I get into the TWRP menu after "Recovery".
chanwt12000 said:
Thx for your advices AarSyl,
I have successfully root the device and get the Super user app running by following one of tutorial video.
For the first time, when I start at teh bootloader and conduct a "Recovery", it shows a dead robot again but without "no command". I have to redo the fastboot command in the command window with the TWRP recovery file once again. (but this time is very smooth no need to unplug cable that sorts of thing) then I get into the TWRP menu after "Recovery".
Click to expand...
Click to collapse
Great. I'm happy that it is working for you. A little tip...download Quick Boot from the Play Store. With one touch, you can power off, boot into the bootloader, boot into recovery, or reboot Android.
I just bought a 2013 Nexus 7 today for very cheap, to use in my car as a headunit and learn a bit about flashing different roms, using the timur kernal, etc. It looks like it was used at some sort of healthcare facility though, because it has some "Optum Health" software on it, deeper than just an app it remained after a factory reset. On restart the optum health logo comes up, immediately after the google logo and says loading, well before it actually loads to the home page of the tablet. So it's pretty deep. I was thinking a fresh factory ROM would help me out.
I was following this guide to get twrp on the phone, as wifi wasn't working (most likely because I had tried to remove the optum stuff by disabling apps, and I got a little trigger happy) load via adb:
https://www.xda-developers.com/how-to-install-twrp/
Everything was cool until I went to restart it. I typed "fastboot reboot" into the command prompt, she restarted, and gets infinitely stuck at the "Optum Health" logo, and the word "Loading" pulses underneath.
I can't get it back to the bootloader by holding the volume buttons and "hold", the cmd/powershell doesn't see the device connected. However, the computer makes the chime sound of a device connecting when I try to open the bootload menu using the buttons, the power shell waits longer to say it failed, but it still doesn't work.
Do I have any options? Or did I completely brick my old, cheap, facebook marketplace, probably stolen from a hospital tablet?
solson1041 said:
I can't get it back to the bootloader by holding the volume buttons and "hold", the cmd/powershell doesn't see the device connected. However, the computer makes the chime sound of a device connecting when I try to open the bootload menu using the buttons, the power shell waits longer to say it failed, but it still doesn't work.
Do I have any options? Or did I completely brick my old, cheap, facebook marketplace, probably stolen from a hospital tablet?
Click to expand...
Click to collapse
Follow these instructions to resolve the problem and flash up-to-date Android - https://wiki.lineageos.org/devices/flo/install
"With the device powered off, hold Volume Down + Power until the bootloader appears, then release the buttons." it really works.
Then connect it to a PC and install proper USB driver - https://www.xda-developers.com/google-releases-separate-adb-and-fastboot-binary-downloads/
Once you get ADB & Fastboot installed on your PC or linux , do a command prompt with the device connected.
adb devices
It should list your device in your terminal output. If and when it does..If your a little hinky on the buttons just do a command prompt: adb reboot recovery, adb will reboot your device for you into recovery mode. Then follow the LOS instructions provided for you & you will be amazed at how great your tablet works. Just a little FYI, if you've never done this before, find the "pico" gapps, don't try to install any of the bigger ones, there is not enough room on the sys partition for the full gapps install. After & if you get pico installed you can always add to it with all the room you have left now on the rest of the device. Also when you are installing LOS, make sure you find and install the gapps at the same time you install the OS, before you reboot your device. It will save you a lot of headaches. Just follow the directions and you will be very happy.
Hey everyone!
So, I've got a HD1903, 8GB RAM 128GB ROM. I updated to OxygenOS 11.0.02, but it was still buggy as hell, so I decided to downgrade. I also had rooted the phone, and decided to get rid of that too. I went to the stock fastboot roms page, downloaded the 10.0.13 ROM and used 'flash-all.bat' file to clear everything. But halfway, it reboots, goes into recovery, then goes to Qualcomm Crashdump mode. That's it. No code or anything, just Qualcomm Crashdump mode, in Blue and Red letters. I tried to hold vol-up, vol-down and power to get into fastboot, but it just loads the fastboot splash screen, then goes back to the same qualcomm crashdump mode screen. Even if i try to hard reset it, by holding vol-up and power, it still goes to the same screen.
Anyone know what to do? I have no idea how to use the 'MSM tool' that everyone talks about, so any guiding advice would be great!
Thanks!
DM me here - https://www.facebook.com/prantor.khan.16 I'll help
HueyT said:
Click to expand...
Click to collapse
I didn't install TWRP, this was all on stock recovery. I also cannot get into fastboot mode.
Msmtool does not need twrp or fastboot--just the software, rom image, drivers, and button combo pushes and holding
OK, so I got it working again, thanks to the advice of reddit users, discord users and the latest msm tool and some googling. I held the vol-up and vol-down buttons for 30 seconds, then connected it to the laptop, with msm running, to a usb 2.0 port, and pressed start. hey presto, it worked. Thanks guys!!
scoped_ar07 said:
Hello
Using the MSM tool is very simple, you just have to download it from this link.
https://drive.google.com/file/d/12y3lO0wIgb2_LSDeVw9x_2C_HjbgZlb_/view?usp=sharing
NOTE: only works on Windows PC
1. Unzip the contents of the RAR into a folder.
2. Run the MSM application
3. Click Start.
4. Connect the cell phone in EDL mode (volume up + down button)
5. Wait for the process to finish (it takes a long time, please be patient)
6. The phone will restart automatically and a message will appear informing you that the equipment is damaged (don't be careful).
Note: The phone should automatically boot into fastboot mode and display a menu, but if it doesn't and instead boots to the T-mobile screen, you need to force shutdown with the power button for several seconds and then manually start it in fastboot mode. (volume up + volume down + power button)
7. Now you need to unlock the bootloader with the command from a Windows CMD window, but you need to download this ADB tool first.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a Windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8- Execute this command while the cell phone is connected in Fastboot mode.
fastboot flashing unlock_critical
9- A question will appear on the phone in which you must allow the unlocking.
-With the volume keys select the option to allow it and press the power button.
-At this time your bootloader will be unlocked.
10. Copy the ADB tool files into the folder where ROM 10.0.13 is and replace everything.
11. With the phone connected to the PC, on the command line, run the flash-all.bat file
12. When the phone restarts and the yellow and white letters appear informing that the phone is not safe because the bootloader is unlocked, repeatedly press the (volume down) button until a menu in Chinese appears.
-PC will detect the phone again in fastboot mode and continue to flash
-Leave the phone and PC still until the process is finished.
-In the command line it will indicate that it cannot find files or partitions (ignore it)
13. Finally, the computer will restart automatically and you will be able to use it normally.
Notes:
1. If the phone after the flashing process with MSM starts up and shows the T-mobile logo, don't worry, just turn it off with the power button and connect it in fastboot mode.
2. Do not try to use it with the firmware that I install with MSM, as it will not work properly.
3. Before locking the bootloader again (if you plan to do so) first update via OTA, to the most recent version of Oxygen, otherwise the system will crash again and you will have to repeat the whole process.
Click to expand...
Click to collapse
Stronger1101 said:
Hi
Using the MSM tool is very simple, you just have to download it from this link.
hotdogt_11_O.01_190920 op7t tmo usa patched unlock bootloader.7z
drive.google.com
NOTE: It only works on Windows pc
1. Unzip the contents of the RAR into a
2. Run the MSM application
3. Click Start
4. Connect the cell phone in EDL mode (volume up + volume down button)
5. Wait for the process to finish (it is delayed)
6. A message appears informing that the equipment is damaged, do not be careful.
7- Now you must unlock the bootloader with a command from a windows CMD window, but first you must download this ADB tool.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8. Now run this command while the cell phone is connected in Fastboot mode.
fastboo ...
Hi
Using the MSM tool is very simple, you just have to download it from this link.
https://drive.google.com/file/d/12y3lO0wIgb2_LSDeVw9x_2C_HjbgZlb_/view?usp=sharing
NOTE: Only works on Windows PC
1. Unzip the contents of the RAR into a folder
2. Run the MSM application
3. Click Start
4. Connect the cell phone in EDL mode (volume up + volume down button)
5. Wait for the process to finish (it's time consuming, be patient)
6. The phone will restart automatically and a message will appear informing you that the equipment is damaged (don't be careful).
Note: The phone should automatically start in fastboot mode and show a menu, but if it doesn't and instead starts on the T-mobile screen, you must force shutdown with the power button for several seconds and then manually start it in fastboot mode. (volume up + volume down + power button)
7. Now you must unlock the bootloader with command from a windows CMD window, but first you must download this ADB tool.
https://dl.google.com/android/repository/platform-tools-latest-windows.zip
-Unzip the tool into a folder
-Open a windows command window, in administrator mode and direct it to the path where you unzipped the ADB tool.
8- Execute this command while the cell phone is connected in Fastboot mode.
fastboot flashing unlock_critical
9- A question will appear on the phone in which you must allow the unlocking.
-With the volume keys select the option to allow it and press the power button.
-At this moment your bootloader will be unlocked.
10. Copy the ADB tool files into the folder where ROM 10.0.13 is and replace everything.
11. With the phone connected to the PC, in the command line, run the file flash-all.bat
12. When the phone restarts and the yellow and white letters appear informing that the phone is unsafe due to having the bootloader unlocked, repeatedly press the (volume down) button until a menu in Chinese appears.
-The PC will detect the phone again in fastboot mode, and continue flashing
-Leave the phone and the pc still until the process is finished.
-In the command line it will indicate that it cannot find files or partitions (don't pay attention)
13. Finally the equipment will restart automatically and you will be able to use it normally.
Notes:
1. If the phone after the flashing process with MSM starts up and shows the T-mobile logo, don't worry, just force it off with the power button and connect it in fastboot mode.
2. Do not try to use it with the firmware that I install with MSM, as it will not work properly.
3. Before blocking the bootloader again (if you plan to do it) first update via OTA, to the most recent version of Oxygen, otherwise it will crash the system again and you will have to repeat the whole process.
Click to expand...
Click to collapse
Oh wow that was a long and well defined post. Thank you for taking the time to type it out.
As it happens, I fixed my issue already (IDK if there's a solved flair for XDA or something?). I downloaded the latest (10.0.15) MSM Tool from the XDA page, held the vol-up and vol-down for 30 seconds this time (as per advice from discord users) got the phone into edl mode, connected to a usb 2.0 port and let msm tool do it's thing. Everything is working perfectly now.
I've got the same problem but even with holding vol up+down buttons for 30 seconds I can't get into edl mode. It boots into qualcomm crashdump mode. I don't have fastboot working, I only see fastboot splash screen for a sec and then qualcomm crashdump mode appears. Could someone help?! As soon as usb cable is connected phone boots into qualcomm crashdump mode. no matter what I do.
Also do service centers undertake servicing for such phones which bricked because of badly flashed roms.
Āryan-9909 said:
Also do service centers undertake servicing for such phones which bricked because of badly flashed roms.
Click to expand...
Click to collapse
Yes, theyll just change out the motherboard
HueyT said:
Yes, theyll just change out the motherboard
Click to expand...
Click to collapse
If they're going to just change the motherboard, I wonder what the EDL mode is meant for. Anyways, I won't go for motherboard change one can buy a new and better phone at that kinda price.
Anyways, I Fixed it through EDL method, you have to hold vol up and down simultaneously and immediately connect to windows (while still holding both buttons) via original USB cable. Check with Device manager if your device shows up, it's easy enough but you might have to keep trying to you get it right. Thereafter, disable driver verification in windows and if Sahara communications failed message appears in msm tool, turn off phone and repeat the procedure again.
The repair peeps only fix hardware and not software. It's more cost effective for them to swap out hardware faster than messing with msmtool like us
Āryan-9909 said:
I've got the same problem but even with holding vol up+down buttons for 30 seconds I can't get into edl mode. It boots into qualcomm crashdump mode. I don't have fastboot working, I only see fastboot splash screen for a sec and then qualcomm crashdump mode appears. Could someone help?! As soon as usb cable is connected phone boots into qualcomm crashdump mode. no matter what I do.
Click to expand...
Click to collapse
OK, so you won't get any confirmation that you're in EDL modem you just have to wing it. What I did, I first opened the MSM tool on my laptop, connected the USB side to the laptop at a USB 2.0 port, and kept the USB-C side within easy reach. I held the buttons down with one thumb for 30-35 seconds, and while still holding them down with one hand, i connected the cable to the phone and clicked enum in MSM, it showed connected so I let the buttons go, and it didn't restart. I clicked start, and it worked for me.
scoped_ar07 said:
OK, so you won't get any confirmation that you're in EDL modem you just have to wing it. What I did, I first opened the MSM tool on my laptop, connected the USB side to the laptop at a USB 2.0 port, and kept the USB-C side within easy reach. I held the buttons down with one thumb for 30-35 seconds, and while still holding them down with one hand, i connected the cable to the phone and clicked enum in MSM, it showed connected so I let the buttons go, and it didn't restart. I clicked start, and it worked for me.
Click to expand...
Click to collapse
You don't have to hold buttons for that long, you can immediately connect it to PC. There is usually a sound to indicate that a new device has been connected to windows, you can also keep device manager open for confirmation. This video really helped.
After receiving a " qualcomm crash dump" , I was able to boot into recovery. Then I had done a factory reset.
Phone turns on fine, charges as well.
Although, On my Laptop / Desktop it does not see the phone within MSM, ASs well as ADB, Fastbootd or device manager.
I have the correct drivers downloaded.
Ideas ?
hightech316 said:
After receiving a " qualcomm crash dump" , I was able to boot into recovery. Then I had done a factory reset.
Phone turns on fine, charges as well.
Although, On my Laptop / Desktop it does not see the phone within MSM, ASs well as ADB, Fastbootd or device manager.
I have the correct drivers downloaded.
Ideas ?
Click to expand...
Click to collapse
Qualcomm 9008 drivers too?
HueyT said:
Qualcomm 9008 drivers too?
Click to expand...
Click to collapse
Yes.
I went ahead and ran another factory reset via recovery, no luck.
New cable, another PC?
HueyT said:
New cable, another PC?
Click to expand...
Click to collapse
Tried both, my desktop would always connect, adb, fastboot, etc.
I had just just freshly installed oneplus drivers including qualcomm on my laptop. Device was not recognized before driver installation or after.
Figure id try on my Mac, and linux laptop. no dice.
ADB is enabled.
Here are the drivers that are installed on my PC ( I enabled hidden devices, in order to see them ) These were recognizing prior to " qualcomm crash dump" . Not phone will not even be seen
Hello
I need help here I have tried everything to fix my oppo reno 6 5g chinese version and now I am at a dead end can anybody give any suggestion.?
My phone is on black screen and its showing only for 2 second on device manager as some other version which made mtkclient tool to failed handshake and sp flash tool to give error.
like attached screen shots.
In device manager it is showing as V_1632 which is idk what.
I tried all combination but phone is at black screen now.
Device is not going into BROM mode.
Any help will be much appreciated.
hmmm, at least you didn't flash the wrong preloader, so we can save this pretty easily actually.
Just simply follow this guide:
Download VCOM drivers: Mega Link
Install LibUSB and filter your device driver after connecting it through USB while pressing on both vol + and vol - buttons.
Install Python and install it's requirements using the command `pip install pyusb pyserial json5` in CMD.
Extract MTK bypass util anywhere and run the command `python main.py` in the extracted folder through CMD while your device is connected (KEEP HOLDING VOL + AND VOL - DURING THE BYPASSING!!!).
Open SP and flash the scatter file of your stock ROM (PLEASE ONLY FLASH YOUR STOCK ROM) (ONLY USE DOWNLOAD MODE).
Then reboot your device and it should work.
If you face any issue or don't know how to do a step of those just reply to the thread. I'll try to attach some pictures, just be aware I'm only online at about this time.
XDHx86 said:
hmmm, at least you didn't flash the wrong preloader, so we can save this pretty easily actually.
Just simply follow this guide:
Download VCOM drivers: Mega Link
Install LibUSB and filter your device driver after connecting it through USB while pressing on both vol + and vol - buttons.
Install Python and install it's requirements using the command `pip install pyusb pyserial json5` in CMD.
Extract MTK bypass util anywhere and run the command `python main.py` in the extracted folder through CMD while your device is connected (KEEP HOLDING VOL + AND VOL - DURING THE BYPASSING!!!).
Open SP and flash the scatter file of your stock ROM (PLEASE ONLY FLASH YOUR STOCK ROM) (ONLY USE DOWNLOAD MODE).
Then reboot your device and it should work.
If you face any issue or don't know how to do a step of those just reply to the thread. I'll try to attach some pictures, just be aware I'm only online at about this time.
Click to expand...
Click to collapse
I did everything like you described step by step first 3 steps were installations so that went ok but in step 4 I followed your instructions but nothing happend.
I pressed VOL up+VOL down buttons but nothing happend for long time.
Here is screen shot of CMD
I think preloader is damaged or something because not its not going in BROM mode at all only black screen.
If i press VOL up+VOL down+PWR buttons then in device manager phone is shown as I shared screenshot in post but only for like 2 seconds.
like this
Also in SP flash tool detects the phone but when I hit the downlad button it gives error STATUS_ERR instantly not even start the process.
Most likely you didn't use LibUSB right, just open the app connect the device and when you see it in the list of devices highlight it and press install
XDHx86 said:
Most likely you didn't use LibUSB right, just open the app connect the device and when you see it in the list of devices highlight it and press install
Click to expand...
Click to collapse
I did exactly what you said but the problem is phone is like not responding to VOL+andVOL- buttons command, in LibUsb where it says waiting for devicec i pressed both volume buttons and connect and waited for 1 minute atleast but nothing attached screenshot for rfrence. its just empty.
But when i press all HW buttons then LibUsb shows a device then I select it and install and completes it but thats the problem it only shows for 2 second then gone.
like this
what should i do now?
I think you fried the preloader mate, you need to do a test point connection and force the device to connect to the cpu directly.
If you're unsure how to do that please send your device to a professional instead.
XDHx86 said:
I think you fried the preloader mate, you need to do a test point connection and force the device to connect to the cpu directly.
If you're unsure how to do that please send your device to a professional instead.
Click to expand...
Click to collapse
yeah im not sure how to do that. I think too much flashing may have resulted in that.
Thank you for your help.
but in case if they didnt take it then im afraid im gonna have to try that is there any tool or process or help where i can learn more abt this test connection process?
mamomia said:
yeah im not sure how to do that. I think too much flashing may have resulted in that.
Thank you for your help.
but in case if they didnt take it then im afraid im gonna have to try that is there any tool or process or help where i can learn more abt this test connection process?
Click to expand...
Click to collapse
It's device specific so I'll need to look into it and reply to you, but generally speaking you're going to connect a USB to the device through specific CPU pins on the motherboard.
XDHx86 said:
It's device specific so I'll need to look into it and reply to you, but generally speaking you're going to connect a USB to the device through specific CPU pins on the motherboard.
Click to expand...
Click to collapse
Oh it means I need to open up the phone.
That will be the problem because I dont have the tools to do that.
I guess first I have to try and find some professional then.