[Xiaomi Mi 10T Lite (gauguin)] need help for firehose file patching - Xiaomi Mi 10T Lite Questions & Answers

My mi11 bricked.The screen only shows errors: system ui isn't responding,I entered recovery mode and then upgraded to the latest system now.but nothing changed.I also restored the factory settings, but the problem has not been resolved.
Miflash error: Flashing is not allowed in Bootloader Lock State​so,i need help for the firehose file patched to skip the EDL authentication for flash rom (gauguin_images_V13.0.11.0.SJSEUXM)
Many thanks for your help .

It will be you are hard to find. Weather try in developer options to unlock bootloader wait 7 days and flash again

its bricked.Unable to enter settings, unable to open developer options

I bought a second-hand mobile phone to restore, because the display was broken, the seller said that there were no associated accounts, as the display did not show an image and only sound, I deduced that everything was going well, when I tried I found that I had an MI account associated. the seller don't know also the mi account information, now I can't use it at all, I didn't want to spend more money on the phone so I tried everything that is within reach on the internet. The mobile has:
1. My account (I don't have the information)
2. Impossible to unlock the bootloader (I can't access the mobile phone)
3. Impossible to enable debug mode (I can't access the mobile phone)
4. I can connect in fastbook
5. I can connect in adb sideload
6. I can connect in EDL mode (Qualcomm 9008)
I tried QPST, QFIL, but it always gives an error, maybe because of the firehose.
As the bootloader is blocked, I have no more chances for free, the last hope was to try Firehose in Auth for this model, but I can't find it anywhere.
The cell phone does not detect the Touch, and every time I turn it off it restarts automatically. However I can use a mouse in OTG.
I thought if I did a flash it would solve it too.
The last solution is to pay someone who can do the job and guarantee that it will work without restrictions, for that you would also have to find someone you can trust.

Related

Urgent, bypass pincode possible?

My father in law died last weekend and we don't know the pincode of his stock Nexus 5X. We can access his Google account and we know the pincode of his sim card. I hope someone can help us out to get access to his phone. Things we've tried:
- The vingerprint reader was setup but we've tried a lot of possible pins. We've tried his vinger yesterday but because of the attempts the pin is also required now.
- With a pattern lock you'll get a possibility to unlock through the Google account password after some attempts but his phone was secured with a vingerprint and/or pincode. Only the delay between attempts get increased, currently 16 minutes between them.
- The lock option from https://www.google.com/android/devicemanager, but because there is already a pin lock it doesn't work. The pin doesn't change.
- I've tried to access the phone through ADB, booted into the recovery but "adb devices" doesn't see the phone. When I choose to "install update through adb" I see the devices with "adb devices" but I can't use "adb shell", only sideloading works.
- Installing a custom recovery could work but the bootloader is locked, when I unlock it a full wipe will be performed so we still can't access the data.
- From the Play store in the browser on my Mac I've installed the androidlost.com app on the phone, but the app needs to be opened once before it can be used.
- A rubber ducky could help us out, but I don't have one and the time between attempts get increased and increased... it would take weeks, months or years to unlock.
What other possibilities do I have?
First sorry for your lost!
Second, i don´t know for sure, but maybe get the phone to the store where you bought it and explain the situation, maybe they will give a correct advice or like you said the phone is registed in google ( device manager) maybe if you contact them they will help you with that ( the problem is they probably will take a long time to reply or don´t reply at all) or wait for a more expert user than me here in xda,
again, sorry for your lost and hope you solve this problem,
cheers
If the phone was rooted with a recovery installed, YES, you could delete the passcode files and get into it, without root/recovery, you cannot get into it without the password, that is the point of encryption and passwords and all that jazz.... Yes there is probably a way for some high level hacker to do it but good luck finding that.... If you just want to be able to USE the phone, do a factory reset from recovery....

[SOLVED]Need Help Regarding Bootloader Unlocking Of Mi Max Prime(128gb)

Hi Everybody,
I need help regarding Bootloader Unlocking of Xiaomi Mi Max Prime(128gb).
I`ve all the prerequisits :
1. Unlocking Permission
2. ADB and Fastboot Drivers Installed
3. Mi Acoount activated
4. Usb Debuging, OEM Unlocking, Usb Debugging(security Settings) Options - ON.
5. Mi Cloud - Find Device - ON
6. Device Located (Both in Device and PC).
7. MiFlash Unlock Tool - Account verified for Permission.
But can`t Add Device and Account through Mi Unlock Status option in Device - It always shows "86012 with some chainis languages".
I`ve tried FlyVPN too to add the device and account, but can`t add.
It always shows "Couldn`t verify device - Current account is different form the account info on the device" - when I use any Old version of MiFlash Unlock Tools (i.e MiFlashUnlock_1.1.1111.1_en, MiFlashUnlock_1.1.0317.1_en etc).
And it always shows "Current account is not bound to this device"
In the "Settings -> Developer options -> Mi unlock status" binding account and equipment
" - when I use the latest version of MiFlash Unlock Tools (i.e miflash_unlock-en-2.2.406.5 ).
I really don`t understand, what I`m missing ?
It`s being 6 days I`ve got the permission, can`t even yet unlock the bootloader.
Would anyone help me to unlock the device?
Any suggesstions/advice will be highly appreciable.

[HELP] Can't update recovery / Can't bypass 'Just a sec' dialogue in setup wizard.

I need help with my Honor 8 Pro.
So, I unlocked my bootloader and installed TWRP but after some days I screwed up something and the TWRP's gone and now there's just the erecovery available (However its only giving me 'Update and reset' option instead of usual wiping and it's failing to update itself on clicking that option)
Second part is, I can boot my device but its getting stuck on 'Wait a sec' screen after entering WiFi details in the setup wizard (and I can't bypass it because of 'The way you restored factory settings may pose security risks. Please verify your identity with your Google account' message)
Any help would be appreciated.
P.s. USB debugging is turned off so phone is not getting detecting in ADB/Fastboot

RN8P blocked with Mi account.

I found a RN8P and is blocked by Mi account, I waited for the go owner to call but nothing. Is there a way I can unblock it so I can reach the owner? I don’t want to spend money on it since it won’t be for me. Any thoughts,ideas, advices?
Here is the instruction, but it is in Russian
Xiaomi Redmi Note 8 Pro - Прошивки MIUI - 4PDA
Xiaomi Redmi Note 8 Pro - Прошивки MIUI
4pda.ru
I had the same Problem, i buyed a RN8P where the Seller has forgotten his Password from his MI Account. One Day i wiped all Data because the Phone was messed up with unnecessary Programms and Data and after rebooting there comes a black screen and "This Device is locked".
After Weeks of reseaching over the inet and trying multiple Ways and Account Remover, Unlocker, etc. i have found a Solution! You can remove the MI Account from your RN8P by using this Guide to flash a new firmware following this Guide:
UNBRICK BEGONIA NO AUTH
Requirements: 1) PC 2) Internet 3) Patience Windows Method: • Download this file - Click-Here (Download from Telegram) (https://mega.nz/file/A4YSEZaA#0Jk3_jH8uVtMnATciVRtWw2r_SH0NPLq4P6SrGNuwJQ)
telegra.ph
Note that is very importand that you do that without connection to the internet! You have to do some additional steps....
First you have to format 3 Partitions on the Phone: Go to the "Format" Area of SP Flash Tool, select "Manual Format" and type
(to format the FRP Partition) Begin Adress "0x5888000", Format Lengh "0x100000"
(to format the MI Account Partition) Begin Adress "0xe188000" Format Lengh "0x4678000"
(to format the userdata Patition) Begin Adress "0x1d2800000" Adress Lengh "0x30000000"
You have to run the "BROM Tool" everytime before you can do one Action with the SP Flash Tool, means before each Format or before each flash. The SP Flash Tool will crash after formatting each Partition but thats not bad, just restart, run the BROM Tool and continue. After you have formatted these 3 partitions you can flash a firmware of your choice.
After flashing turn your phone on (dont insert a SIM Card or connect it with Wlan to the Internet!), go to the main options and disable any automatic update you can find! Such as automatic Firmware or App Updates. You have to deinstall or deactivate every original Xiaumi App just to be sure. I also deactivated some Certificates from Companies but you should be very careful with this.
Why you have to deactivate those Xiaomi Apps and automatic Updates?
The Xiaomi FRP Protection is Server hosted, so when you have disabeld the MI Account FRP Protection with the Steps above, some Apps on your Phone could call Xiaomi Servers and automatically sends the Serial Number (not the IMEI, i mean the Serial Number you see with the fastboot command "fastboot devices") home and the Xiaomi Servers tell back that its a "blacklistet Device" and it will go in locked state again. So you have to do everything again.
I hope i could help some of you guys who have the same problem like me. Unforgently xiaomi support doesn't help people (regardless wich problem). Please excuse my English, i'm not a native speaker, if you have further questions or other issues, please feel free to ask!
If you have Problems tonuse the "BROM-Tool" please note that you have to install TWO Device filters for mediatek devices!
hi i tried this and i downgrade it bypas mi account and enter the systemand seems to be ok but when connect internet and phone licking again in mi account. what can i do to?

Xiaomi 5A (MDG6) - How to unlock without losing data. USB debugging off

Hello everyone.
I've been digging through forum to find a solution to my problem. I have forgotten lock screen pattern to Xiaomi 5A, I would keep on going and try to enter and remember which combination I used, but every attempt is followed by 4min lock up. I've stored there a password in a notepad which I must retrieve.
I have an access to MI account. USB debugging mode is off.
I've tried few things already.
Method 1#:
https://forum.xda-developers.com/t/...ing-android-password-pattern-face-pi.2620456/ - Doesn't work, as USB debugging mode is off.
To enable usb debugging I found one method. Using MI unlock software LINK to enable fast boot and then follow with the steps from above. However on MI UNLOCK I'm showing "After you unlock the device, it will become less secure. Your personal data may be leaked or lost.". Could any one confirm that this process won't wipe the data?
Method 2#:
Secret codes - none of them work.
*#*#6484#*#*
*#*#3646633#*#*
*#*#4636#*#*
Your help will be greatly appreciated and the right solution rewarded. Please let me know if you have any ideas how to access the phone.
Thanks!
unlock your device didnt erase your data
SzatanSzarlatan said:
Hello everyone.
I've been digging through forum to find a solution to my problem. I have forgotten lock screen pattern to Xiaomi 5A, I would keep on going and try to enter and remember which combination I used, but every attempt is followed by 4min lock up. I've stored there a password in a notepad which I must retrieve.
I have an access to MI account. USB debugging mode is off.
I've tried few things already.
Method 1#:
https://forum.xda-developers.com/t/...ing-android-password-pattern-face-pi.2620456/ - Doesn't work, as USB debugging mode is off.
To enable usb debugging I found one method. Using MI unlock software LINK to enable fast boot and then follow with the steps from above. However on MI UNLOCK I'm showing "After you unlock the device, it will become less secure. Your personal data may be leaked or lost.". Could any one confirm that this process won't wipe the data?
Method 2#:
Secret codes - none of them work.
*#*#6484#*#*
*#*#3646633#*#*
*#*#4636#*#*
Your help will be greatly appreciated and the right solution rewarded. Please let me know if you have any ideas how to access the phone.
Thanks!
Click to expand...
Click to collapse
Unlocking bootloader should erase your data

Categories

Resources