Develop Bugs

TCT-Alcatel Move

Hi XDA geeks , pros and fans !
I'd like to start this new threadline concerning the freshly-appeared TCT MOVE handheld device marketed for the budget segment.As i understand it appeared in march or later this year and has quite good specs for the approx. 100 euro category.
Some details can be found on
http://alcatelonetouch.com/products/smartphones/move
Contrarily to some beliefs IT IS NOT a branded OT-908 ,rather a cosmetized one .It comes in black or silver / white , a bit heavy for it's size , and higher specs than the OT-908.
Concerning the hardware specs, i'll be coming back later with some accurate chipset and sensor details.For now
OS is Android Froyo v2.2.2.Looks like there will be official ROM updates,at the time being there is the OneTouch Upgrade v1.2 ,which downloads about 540 Mb chunked firmware files, and exits with error.
Memory is 512 Mb RAM , for user space is available about 300 Mb
512 Mb ROM flash, available to user about 160Mb.
SD card slot supports up to 32Gb MicroSD, the phone comes with a 2Gb one.
Camera is a 2.1Mpixel one.There is no secondary one,but the main camera is available for video calls,with Yahoo! Messenger i tested it myself.How to use it this way i will explain later.
GPS is amazing , if assistance software is used , the lock-on takes only seconds.
Sensors - linear acceleration sensor
- 3 axis orientation sensor
- 3 channel magnetic field sensor (digital compass)
- light sensor for illuminance detection
- optical proximity sensor , it seems not in use by operating system(or rather poorly)
Processor - 600 MHz Qualcomm ARMv6 compatible, min frequency is 122 Mhz, and deep sleep capability.Qualcomm MSM 7627 chipset

rooting ?
hi djada80.i should like to ask if you managed to root your phone ?

Yeah , it's quite simple.There are in the Android Market some free apps , i think the best which i also use is the one named Ginger Break.Just download and install it.Detailed usage info can be found here
http://forum.xda-developers.com/showthread.php?t=1044765

firmware upgrade
it seems that the branded ones somehow cannot be upgraded ! at this point i need assistance , so PLEASE , if there is anybody experienced in debranding Acatel smartphones, then YOU ARE MOST WELCOME !.I saw guys having problem with debranding T-Mobile Move , so let's DO IT !

cannot sync with windows
i cannot sync my tmobile move with windows.have a toshiba satellite c665 with win 7 .pls help !

connect phone to computer,enable usb tethering.install alcatel android manager on computer. Can be found here
alcatelonetouch.com/contents/download/T-Mobile_AndroidManager_2.2.1108.1645.rar
This should work,instead of Android Sync Manager WiFi ,the last has some issues with this phone ,do not use it.

Yahoo! messenger front camera
Contrarily to some beliefs THERE IS POSSIBLE TO MAKE VIDEO CALLS with front camera only on Froyo 2.2.It is quite simple:
1.) if you have any version of yahoo apps , remove them all
2.) install Y!Messenger v1.3.2 , the afferent audio and video plugin and
optionally Y!Mail v1.3.2
Nothing fancy with it , just works.Remember, DO NOT UPDATE from Market.
Might also check this,if it doesn't work
http://forum.xda-developers.com/showthread.php?t=1087769

remove bundled apps ?
Hi !
Is there a way to remove some of the unnecessary factory shipped apps ?

RE
Yes , there is. So the smart method vould be to remove them from phone memory , and eventually install it on SD Card , if they are (and they are) UNMOVABLE.
Or just leave them ,anyway a factory reset will restore all the shipped applications.
1.) [optional] install Android SDK with platform 2.2 , sdk tools and eventually drivers.Enable USB debugging on device.On PC launch command prompt and change directory to \Android\android-sdk\platform-tools\.Run command
adb shell pm setInstallLocation 2
This enables SDCARD installation by default.Prerequisits to have ROOT ACCESS.
2.) with RootExplorer simply delete unwanted applications from \custpack\apps\ on device.Optionally you can make backups.
3.) if you made backups , the backed-up apk can be used to be reinstalled , NOW ON SD CARD
Good luck.

RE again
A reboot of the device is required to cleanup the junk after a forced delete.Or it can be done manually , BUT USE CAUTION.

i have an alcatel move branded Cosmote Move, i like this phone very much but i`ve managed to brick it the second time, first time i bricked and took it to waranty, they reinstall the software free of charge, now it has the same simptoms (pass the carrier logo and get stuck to carrier animation) and i need to send it to waranty again. i dont manage to get it unbricked. i`ve root it with gingerbreak but this phone doesnt go to recovery mode. i`ve searched the internet and google it for hours, but nothing.
if anyone knows how to do it please tell me, in the user manual says hard reset vol - and power, get stuck whit touch buttons light up and screen black!!
thanks in advance

re Themaster
it's not a brick yet i suppose , though you didn't specify how you managed to "brick" your phone.a nice clean reflash would solve the problem , probably you deleted some system files while in root mode.again did you use root explorer or something similar ?
try a factory reset as it follows:
1.) turn off the phone
2.) press vol up and the power on and hold the buttons pressed for about 1 minute
3.) the phone boots up , android logo appears and then an animation with some sort of thrashcan or whatever
4.)wait until it finishes , then the phone shuts down automatically.power on the phone and it will be restored
Beware ,battery must be at least 70 % charged or kept in charger , NOT USB connected to PC.
This restores phone to factory state , but not all the applications from /custpack/apps
Best regards !

Useful Key Combinations
These keypress modes apply on a shut down phone
Hard Reset - reinstalls android core system from ROM , deletes user data and misconfig
key combo : vol up + power on long pressed until trashcan animation appears
Flash Mode - used for ROM update , useless momentarily
key combo: vol down + power on long pressed , black screen appears and touch buttons lit up
Root access , mount filesystem with root access ,DANGEROUS !
key combo : home + power on long pressed until boot

build environment under Ubuntu
Lately, there has been some problems setting up an Android build environment under Lucid Lynx, as i've seen many have been complained for the missing java5 jdk.
For Romanian users: seems to be a problem with the Romtelecom DNS servers , when adding Jaunty or Dapper repositories to Lucid.
Use Google DNS as alternatives 8.8.8.8 and 8.8.4.4.This works.

From what I've been able to determine. The move and 908(s) are the same hardware with with only cosmetic differences. Something is different in software, I've been unable to root my 908s with ANY tools I've found.
I was also unable to use ADB under windows. The handset apparently requires four drivers, I was only able to find three of them. I got the Alcatel tools to work, as well as tethering, but no ADB. i didn't have any such issues under Ubuntu, but without root it isn't helpful.
I could not locate a stock rom or source anywhere on the Alcatel sites, so I sent a GPL request, i'm waiting to hear back.

UPDATE
After a long night I managed to root my 908s. I'll write out the jist of it, but I was flying by the seat of my pants, fueled by caffeine and sleep depervation. DON'T consider this a HOWTO.
First off, to the best of my knowlage there is no one click solution as of yet. As I said before still missing the driver that makes ADB work in windows, and handset based solutions didn't pan out. A little reasearch showed that the OT-990 has the same chip/ram and ROM space as ours. The screen is bigger, and I don't know what board is in it, but on a hunch I figured it was close enough. So I went here: http://forum.xda-developers.com/showthread.php?t=1164391 in the hopes that some sort of combined effort in future ROM development would be possible.
Yes that's right folks its a guide to MANUALLY root you handset with ADB. So not for the faint of heart. I didn't have high hopes, as issuing ls -l on either the sqlite folder or data threw a permission denied. So blindly I tried to push psneuter, busybox and su to /data/local. I almost fell off my chair when it worked! from there I used psneuter to get ADB into root, and managed to get the su binary to /system/xbin, and Superuser into /system/app. Superuser was installed, but still no root. So I checked out Root Checker to see what was going on. There are three places that su typically lives; /system/xbin, /system/bin, and /sbin. So I tried to put su in those folders. I got it into /system/bin but sbin is mounted read-only. I did not remount any directories, as the instructions are lacking syntax (I'm a little rusty with advanced mounting commands). I think things are mapped a little differently anyway. I still did not have root on the handset, so I then fired up Superuser to see what it could see. It saw the su binary, even though it wasn't working right. Then I thought well if it can see it, then maybe it can update and fix it. Sure enough after running the update to su in Superuser, (drumroll please...) I had working root.
So that's my story so far, I'm gonna give Alcatel a week or so to reply to my request. Then we'll take it from there. (Hey it worked on Huewei right?)
If a real dev should come across this, feel free to jump in. Its a solid little phone and has the potential to work on a range of handsets.

Gratitude
Thanks snkiz for your attention ! I am pleased that someone 'heavy' noticed my efforts of dedicating this threadline to the newcomer ! Indeed a small little phone with potential , maybe in time we get it gingerbread , cupcake ( or whatever ),even wm6.5 or 7 ...
As of ADB drivers , i had ADB from the first by these steps:
1.) http://www.alcatelonetouch.com/contents/download/move upgrade 1.2 Setup.rar , package contains the drivers
Now i noticed that when i try firmware upgrade , the utility downloads about half a giga of *.bin files and then exits with 'download failed error'.
2.) installed Android SDK , platform tools and Google drivers (i am not sure if necessary), the 2.2 platform (api 8)
Under Win7 cmd in platform tools , adb shell , su and on device pops up 'unknown has been granted superuser rights' and voila! in cmd shell i have '#'.Previously installed Gingerbreak.
My device is a Cosmote Move.

Ya, no I got that file too. I think they are "consumer drivers" because like I said I got all the Alcatel tools running but on my win 7 one driver was still missing, and I have pretty good googlefu. effin hate windows, this is why. I'm by no means a "heavy" but I am comfortable in a Linux environment, that helps alot. As to you being able to get gingerbreak to work, i'd bet that comes down to carrier firmware.
---------- Post added at 06:53 PM ---------- Previous post was at 06:39 PM ----------
djada, seeing as your the op could you please re-tag the thread with the model numbers to make it easier to find? cosmote, 908, 908s, and qualcom should do.
perhaps a mod could move this thread to the android hacking forum where it can get the proper attention please?

ADB driver
Driver files are from WHATEVER.\android-sdk\extras\google\usb_driver\ , if does not install automatically , can be forced.Anyway Win$ux 7 detects ADB interface , installs some sh.t from windows update server , and you'll have an ADB interface in Device Manager (working or not).Try to force the google drivers.
On the other hand ,i'm sorry but dunno how to move the thread , maybe i should start a new one in
http://forum.xda-developers.com/forumdisplay.php?f=565&order=desc&page=552
Just looked at it and they don't have Alcatel

Mod
Just started workin on a Cyanogen build , if i manage to build at least a kernal img , maybe i can lure in the Koush guy from github.We are in need of flash , backup , recovery tools.Not as lucky as the Samsung or HTC guys ...

Nextbook Flexx 11 how to dual boot android and 8.1/10

ok! where to even start...
I like many got this 2in1 at wal-mart and I live it. unfortunately I like many am not yet familiar with the new UEFI bootloader bios SOC stuff
heres what I do know and please correct me if im wrong. also please tell me if this 2 in 1 is and can be flashed the same as the asus t100
ok the Flexx11 has a bayntrail-t CR quad core processor 1.33-1.83ghz model Z3735F the t100 is3740
11.6" screen ips touchscreen at 1366x768 res
Efun is the corp and yifang vers.NX1106.1.02.008\139
THE BIOS IS YFG0315009112
it is a 32bit EFI bootloader
the reason I mention all of this is I have tried several times to dualboot androoid and each time ruined the computer and had to return it and I simply no longer wish to return it and love it to much to get something else
the first try the time began to lag and was unfixable for some reason the second time i somehow lost the keys booting and formatted wrong or something and the tablet bricked it would remain black with keyboard lit and no button combo could get it back no boot at all.
I am currently using AMIDUOS to run android kitkat and I love it but from what I understand it isnt compatible with win10 and really still isnt the same as the full android being on the tablet although really really close and awesome
but honestly I have been doing this stuff for years and now with this new windows secure boot and system on a chip stuff im lost

ever get anywhere with this?

I'm curious as well.
It has to be possible. I say that because I recently owned a ChuWi dual-boot device with the same Baytrail processor and SOC.
I wonder if it wouldn't be possible to take a system dump from one of the chuwi dualboot devices and flash it to the nextbook.
Sent from my Ascend Mate 2 using XDA Free mobile app

I'm also interested in doing this. It appears that the Nextbook Ares has the same hardware (minus 1GB RAM) but has Android. I contacted Nextbook to see if I could get a copy of the Ares Android firmware but was denied. If someone with the Ares could upload a backup that would be helpful.

I was finally able to get this working using this method...
https://hitricks.com/guide-how-to-dual-boot-remix-os-with-windows-uefi-legacy
So far I was able to get it to boot from a partition on the main drive as a test. In the process of installing to a secondary partition on my sd card. We'll see how it goes.
I wasnt able to get the boot menu that he shows but after going through the steps I then had an Android OS boot option in the bios boot menu. Pretty awesome! Runs great. Tried running Dead Trigger 2 as a test with full graphics. Ran perfectly.

I just bought one of these yesterday, and it shipped with Windows 10 Home 32-bit. I'm trying to install the 64-bit version but it won't boot from USB. Turns out it doesn't support 64-bit OSes. Where can I find recovery images for this? I messed up and now I don't have audio or touchscreen drivers.

64 bit processor?
I just bought one of these yesterday, and it shipped with Windows 10 Home 32-bit. I'm trying to install the 64-bit version but it won't boot from USB. Turns out it doesn't support 64-bit OSes. Where can I find recovery images for this? I messed up and now I don't have audio or touchscreen drivers.
Click to expand...
Click to collapse
Alright, I'm slightly confused now. Looking at system specs for mine it says it has an x64 based processor. Doesn't that mean it should be able to handle 64-bit OS? Even though it comes with 32-bit? If possible I would like to put 64-bit on it as well, but I'd like to be sure that that's not going to break it.

GeneticJulia said:
Alright, I'm slightly confused now. Looking at system specs for mine it says it has an x64 based processor. Doesn't that mean it should be able to handle 64-bit OS? Even though it comes with 32-bit? If possible I would like to put 64-bit on it as well, but I'd like to be sure that that's not going to break it.
Click to expand...
Click to collapse
It just won't boot the USB. At all. Unless it's 32-bit.

rowdyrocket said:
I was finally able to get this working using this method...
https://hitricks.com/guide-how-to-dual-boot-remix-os-with-windows-uefi-legacy
So far I was able to get it to boot from a partition on the main drive as a test. In the process of installing to a secondary partition on my sd card. We'll see how it goes.
I wasnt able to get the boot menu that he shows but after going through the steps I then had an Android OS boot option in the bios boot menu. Pretty awesome! Runs great. Tried running Dead Trigger 2 as a test with full graphics. Ran perfectly.
Click to expand...
Click to collapse
I'm loving Remix OS on here with dual boot. Having some issues though and I really want this to work.
Main and I mean main issue is no sound at all, no rotation is next in line and Bluetooth isn't working. Everything else works great.
This is so awesome its like Android lollipop with windows desktop functionality. Now if I can get the bugs fixed I will be in android hog heaven.
GREAT FIND BRO!!!!! EXACTLY what I was looking for maybe even better than.
for those interested here is the XDA section for all things REMIX OS
http://forum.xda-developers.com/remix
By the way for those who may want to know I installed dual boot onto the hard drive it went with no issues.Here's some tips for flexx 11
1. I used a partition manager such as easy partition manager to partition the C: drive regardless of what the tutorial said. Couldn't use windows disk management. I deleted the recovery for an extra 5 gigs (make a backup if you do) I used about 19 gigs from the C: drive and made an E: NTFS.
2.Also do not use the remix files from that tutorial use the ones here from the main site http://www.jide.com/remixos-for-pc they are newer and the ones from the other post where incomplete. Also the newer ones on the site now include OTA updating which is totally awesome.
3. I'm hoping this will help someone..... After I was all finished I expected it to dual boot as any other dual boot restart and then i would see options for the OS's not the case here I got stuck on this I was using easy BCD and trying all sorts of stuff, once I looked at the tut a little closer I realized you don't need any of that. Once your all done do a restart and it will go back to windows as usual. Now go to settings, then recovery, then advanced startup and choose from devices I think its the second option on the left list. There you will find Android OS click that and it will take you to your dual boot options. Sounds a lot more complicated than it really is. But believe me once you know this your better off.
And that's all I've got please and I mean please post here with any fixes especially for sound and if you have questions I will try to help.
Thanks
PS: I AM GETTING OCASIONAL LOCK UPS, MEANING THE OS FREEZES AND I HAVE TO RESTART BY HOLDING POWER.

Im not sure if this is good news or not...
Using the methos outlined I was not able to get audio bluetooth autorotate and other things to work but after a bit of digging I found out that remix os has an image specifically for nextbook baaytrail (Our PC) here: http://www.jide.com/remixos/devices
click other upper left.....
I cannot find instructions to install this though and using the other install instructions from here fail because the only part of the file to replace is the system image.
I also attempted the other install methods and easy BCD does not work for this PC
So if anyone can help to install this file specifically for our computer as well as verify that it works and what works and how you installed would be great

OK this is really cool I have made headway sort of.
I have installed kit kat android-x86-4.4-r3.img using the Androidx86-Installv24-5800.exe installer and i have rotation, root and it works pretty good for the most part wifi works great so far no bluetooth, it freezes during shut down and the major issue as in most cases is the sound. Im not sure about the camera now that I think about but i will check and report back here.
I really want the sound working on this and I woud be bigtime happy this forum could be solved as far as im concerned
From what I understand there is a bug with baytrail and linux where the spp port is pointed automatically to the usb or something. but for the life of me after weeks of scouring the internet cannot find a laymens guide to a simple fix for this. I'm really not even sure there is one because I'm yet find a rock solid confirmation of a solution

Update: camera doesn't work either
So far the 4.4.3 port is the best. I just can't seem to find any help whatsoever so its looking like so close yet so far away. Its a pure shame that audio and a few other major bugs are the only things in the way of this being a fully working and easy dual boot method.

I have bought a nextbook flexx10 but am unable to install remix OS. I have followed all the steps highlighted before.
1. partitioned the drive with gparted to make a 10G NTFS drive
2. downloaded android x86 5.1.1 iso and remix iso from jide website.
3. used android installer and android 5.1.1 iso to install the image
4. used 7zip to uncompress the remix iso
5. then copied over the 4 necessary files from remix to the drive to the android drive
6. copied over grub.cfg
Now, I do see the entry for androidOS but when I select that, I just get a message at the center of my screen that says "AndroidOS boot failed" and a blue OK button in DOS like font. thats it.. I am interested in knowing if any additional BIOS settings needs to be tweaked.
furthermore, I have tried installing android x86 6.0 by formating the same partition as ext4. All proceeded well and i got to the last screen that said "Run android-x86 now" or reboot. I removed the USB and was able to get into android. (some missing functionality). But when i reboot into windows and try to boot into androis, I get the same message of Andoid boot failed..
Thus I need to know if there's some BIOS settings related to permissions or sorts that i'm missing.
thanks

murlig123 said:
I have bought a nextbook flexx10 but am unable to install remix OS. I have followed all the steps highlighted before.
1. partitioned the drive with gparted to make a 10G NTFS drive
2. downloaded android x86 5.1.1 iso and remix iso from jide website.
3. used android installer and android 5.1.1 iso to install the image
4. used 7zip to uncompress the remix iso
5. then copied over the 4 necessary files from remix to the drive to the android drive
6. copied over grub.cfg
Now, I do see the entry for androidOS but when I select that, I just get a message at the center of my screen that says "AndroidOS boot failed" and a blue OK button in DOS like font. thats it.. I am interested in knowing if any additional BIOS settings needs to be tweaked.
furthermore, I have tried installing android x86 6.0 by formating the same partition as ext4. All proceeded well and i got to the last screen that said "Run android-x86 now" or reboot. I removed the USB and was able to get into android. (some missing functionality). But when i reboot into windows and try to boot into androis, I get the same message of Andoid boot failed..
Thus I need to know if there's some BIOS settings related to permissions or sorts that i'm missing.
thanks
Click to expand...
Click to collapse
Sorry for the late reply, use the installer and create a separate drive using C: like a D: or E: and get android 4.4 the .IMG that should work for you and the installer should do everything for you.
So use the uefi android installer after you partition a drive to load android 4.4 the uefi IMG
Its just going to piss you off though because there's no audio and seemingly no way to fix it, which is a crying shame ��
P.S. typically secure boot is off in the bios on this machine, but if by any chance you turned it on or the newer ones come that way make sure it is off or this will not work.

UEFI Settings
So I can get to a menu with 6 icons (2 rows and 3 columns) by running the "shutdown.exe /r /o" command and then going to Troubleshoot>Advanced Options>UEFI Firmware Settings and clicking restart. The problem is that when I get to this menu the touchscreen and keyboard do not work, and I can only move the highlighter up and down, not left and right. Hopefully one you guys have figured this out. I contacted the Nextbook support desk and they were no help at all.

korycooper said:
So I can get to a menu with 6 icons (2 rows and 3 columns) by running the "shutdown.exe /r /o" command and then going to Troubleshoot>Advanced Options>UEFI Firmware Settings and clicking restart. The problem is that when I get to this menu the touchscreen and keyboard do not work, and I can only move the highlighter up and down, not left and right. Hopefully one you guys have figured this out. I contacted the Nextbook support desk and they were no help at all.
Click to expand...
Click to collapse
Okay. So I was able to test this one of my co workers Nextbook and it seems like its a problem with mine.

This might be beneficial for us Flexx 11 users. It's a full port of Remix 2.0 to the Ares 8 with everything working except the camera rotation issue. Very promising. I've heard the hardware is similar. Working on attempting to install on mine. Anyone else tried it?
http://forum.xda-developers.com/remix/supported-devices/port-remix-os-2-0-nextbook-ares-8-t3498015

Hey guys,
NextBook Flexx 11, 64Gb, NXW116QC264, Windows 10
I'm really interested in trying to install Remix OS in Dual boot. However, in my trials, I goofed up my tablet. I found an image, but it turned out to be a Windows 8.1 image, and it wiped everything from my tablet. I had originally had Windows 10 on it.
Could someone perhaps be able to send me the recovery partition of their Nextbook; as long as they had Win10 installed. Maybe if I dump a Win10 recovery partition, I can do a repair on it and restore Win10 to the system.
I can't find the stock/factory rom for the Win10 version of the Flexx.
Thanks in advance,
Kori

KorishanTalshin said:
Hey guys,
NextBook Flexx 11, 64Gb, NXW116QC264, Windows 10
I'm really interested in trying to install Remix OS in Dual boot. However, in my trials, I goofed up my tablet. I found an image, but it turned out to be a Windows 8.1 image, and it wiped everything from my tablet. I had originally had Windows 10 on it.
Could someone perhaps be able to send me the recovery partition of their Nextbook; as long as they had Win10 installed. Maybe if I dump a Win10 recovery partition, I can do a repair on it and restore Win10 to the system.
I can't find the stock/factory rom for the Win10 version of the Flexx.
Thanks in advance,
Kori
Click to expand...
Click to collapse
Just to be clear...(and this goes for everyone wondering in the future) it was windows 10, from the factory??? Last i checked
they only shipped with windows 8.1 or android, depending on the model...If not and you put windows 10 on there, back when it was free, you just use the media creation tool from Microsoft to update windows 8.1 to Windows 10 (after restoring windows 8.1)... it can do this because most tablets have unchangeable hardware, so no cd key is required...it's like how your md5 hash verifies your downloaded files, Windows provides Microsoft with your hardwares md5 hash signature and if it is in the list, then it activates the pc/tablet... but, it only works if you got it free, not if you bought it... if you bought win10 then you will need your cd-key when you re-install, while the other steps are same as above... just note, that for the free upgrade there was NO cd-key, therefore in that instance, if it asked you for a key, you would leave it blank, which you can do in any case, and add your key in from Windows if needed...
And... as for the others having sound issues in Android, I read something about a reason for that having to do with something called an... 'audio stack', I think it was??? Not 100% sure what it meant, but basically, it is designed so the audio hardware only works in windows, I think... (so they can make more money, by making you buy the android tablet separately...)
hope this helps someone who stumbles upon this thread...

Wiebenor said:
Just to be clear...(and this goes for everyone wondering in the future) it was windows 10, from the factory??? Last i checked
they only shipped with windows 8.1 or android, depending on the model...If not and you put windows 10 on there, back when it was free, you just use the media creation tool from Microsoft to update windows 8.1 to Windows 10 (after restoring windows 8.1)... it can do this because most tablets have unchangeable hardware, so no cd key is required...it's like how your md5 hash verifies your downloaded files, Windows provides Microsoft with your hardwares md5 hash signature and if it is in the list, then it activates the pc/tablet... but, it only works if you got it free, not if you bought it... if you bought win10 then you will need your cd-key when you re-install, while the other steps are same as above... just note, that for the free upgrade there was NO cd-key, therefore in that instance, if it asked you for a key, you would leave it blank, which you can do in any case, and add your key in from Windows if needed...
And... as for the others having sound issues in Android, I read something about a reason for that having to do with something called an... 'audio stack', I think it was??? Not 100% sure what it meant, but basically, it is designed so the audio hardware only works in windows, I think... (so they can make more money, by making you buy the android tablet separately...)
hope this helps someone who stumbles upon this thread...
Click to expand...
Click to collapse
I realize this is a dead thread, but I had to chime in... I bought my NextBook Flexx 11 from Walmart 3 or 4 years ago and it shipped with Windows 10 Home, not Windows 8.1... However, IMHO, Windows 10 is a resource hog on this little device. I'm currently looking in to installing Linux...

Locked bootloader, cannot OEM Unlock or access USB Debugging

Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.

Calgary84 said:
Short version of question: How can I unbrick my ONEPLUS 3 (A3000) if I cannot boot to Android and OEM Unlock AND USB Debugging both have not been enabled?
Long version: Phone was recently purchased second hand from a third-party market (Kijiji, kind of like craigslist for Canadians). Person I bought it from claimed in the ad that the device was in a bootloop and couldn't access the OS. I had in the past successfully saved a ONEPLUS 1 from bricked status, so I didn't feel a simple bootloop would pose much of an issue. That, and at the price he was selling I really couldn't turn it down.
I tried various different methods of restoring the phone's partitions, OS, and firmware to stock/custom, but had no real luck with any (I will list below what I have attempted). If there was a root cause of this, I believe it's due to the fact that some part of the phone's storage partition (boot or system if I had to guess) had become corrupted at some point. Given the volume of threads I've seen here and elsewhere online, I wouldn't rule out a bad OTA flash, but doesn't really matter. What does matter, however, is that the Android OS is inaccessible despite my best efforts, and the bootloader is set to locked and ADB Debugging remains off.
Generally speaking, is there a way to access Developer Options to correct both these issues through terminal or a tool? I'm confident that I can get my device working again if I could access this menu, but as of yet I have had no luck.
Methods used to restore/info worth mentioning
While I don't doubt their effectiveness at large, for whatever reason I have yet to find a tool/guide that yields the anticipated results upon completion. MSM Download Tool (V3 and V4) have both been downloaded, executed, and completed numerous times, but will still not boot past the loading screen upon completion.
According to Unified Android Toolkit, my device build is being detected as "OnePlus3 7.0 NRD90M" and All-in-One Toolkit is showing that Android 6.0.1 is installed.
Drivers are all installed correctly, as proven both via tools downloaded and through Windows CMD terminal (adb devices, fastboot devices, adb get-state, etc)
Stock recovery and bootloader modes can both be reached through both hardware keys and software commands. I will note that it seems to take longer than I'd expect to boot to either of these modes using hardware keys.
I have utilized multiple USB ports, Type-C cables, different OS' on two laptops (MS Windows 10 and 7, FWUL Linux). I usually have no problem with the device being detected by the system. When I have, it usually involved one pesky USB cord.
common commands used and their effects:
fastboot OEM unlock: fails, cannot be done remotely
fastboot flash x: fails, remote: flashing partitions not allowed
ADB push: fails. cannot access partition
ADB devices: device is seen by system with serial and state
fastboot devices: device is seen by system with serial
ADB sideload: varying results. Some will fail at 0% citing "total xfer: 0.00x", some will reach 47% and fail (always exactly 47% oddly). Generally if the sideload operation passes 47% it will complete.
fastboot format/erase x: fails, partition formatting/erasing not allowed
fastboot continue: executes, but does not help with android bootloop issue as I had hoped
While I searched for an answer online, I did come across an infosec whitepaper regarding ONEPLUS 3 vulnerabilities, though it was over a year old. To my surprise, the command they had been entering works on my device, but I'm not sure how to properly use it effectively. The command used was fastboot OEM boot_mode [rf/wlan/ftm/normal]. Now, I was unable to determine what each of the triggers does, but what I did discover is that with boot_mode set to rf, my device would display chinese/korean lettering in lieu of the usual ONEPLUS logo with "powered by Android" below. This is also how I managed to have my device show up in CMD terminal for ADB commands to be issued. To the best of my knowledge though, there doesn't seem to be much point to it as I couldn't push/pull any files. Does anybody know where I could find more info on this command, as I'd like to know what the other triggers accomplish.
I've just about exhausted every available resource looking for an answer, but im still coming up short. I've gone as far as contacting ONEPLUS directly, but without proof of purchase they can't (more accurately won't) help me. And while it's not a business practice I would personally support, I can understand why they have it implemented. I've contacted a few phone shops in the area, but none have been able to assist me further than I've already gotten in this process.
I apologize again for creating a new thread about this, but I felt my circumstances warranted a new thread due to the bulk of the others having either an unlocked bootloader or TWRP installed, neither of which I do.
So, can anybody offer their help or suggest something I haven't already tried? Or should I be on EBAY looking for motherboards? Thanks in advance.
Click to expand...
Click to collapse
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!

tnsmani said:
Thanks for the exhaustive description. You seem to have covered every known method. If the MSM Tool also fails, I think that it is a hardware issue and you are better off searching for a new motherboard instead of wasting further time on trouble-shooting.
Best of luck!
Click to expand...
Click to collapse
I was afraid of that..... is there a way to test a given hardware component?

Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM

acetone802000 said:
Have you tried the unbrick tool FULL updated: https://mega.nz/#!NmhhgZyB!CM7Fw8VjECiMIhh4gRXUx24QVCiE599_ZFAPDf08AiM
Click to expand...
Click to collapse
Indeed I have, dozens of times between the full and mini versions. I've even gone as far as running the toolkits featuring MSMDownloadTool v4.0 to see if it achieved different results (it did not). The mini tool would finish doing its thing (turned the text green upon completion),but I would face varying partitions not being flashed correctly. The full version completes and does not have these varying partitions missing, but the device would then be either stuck in a bootloop where it will eventually reboot itself, or would hang indefinitely on the "swirling dots" loading screen. I tried the remedy of deleting cache in recovery, but this did not help.

deleted

***UPDATE*** - As I mentioned in this thread earlier, I noticed a discrepancy between the variant type listed on my actual device and the variant type returned when queried via fastboot. This got me thinking, and to make a long story somewhat shorter, I found that while most stock Oxygen images I attempt to sideload onto the device fail (at precisely 47%, oddly), I was able to sideload two different Hydrogen images without any resistance at all. I'm guessing something to do with the eMMC vs UFS file storage systems and how each OS uses them.
So I got Hydrogen flashed onto my my device. Smooth sailing, right? Afraid not. Despite fastboot's output clearly stating it was a successful transfer, and the stock recovery on the device echoing this, I still cannot get the OS to load. Now i' stuck with the loading screen hanging indefinitely prior to animation occurring, so basically the static ONEPLUS logo. Factory resets and cache wipes have done nothing to help the situation along. Conventional wisdom from the threads here seem to say using the MSMTool is the right answer..... and thus the circle of frustration is complete with me arriving back where I started. Does anybody have another suggestion I can try out? Still can't flash/boot to TWRP, unlock bootloader, or access Android to activate USB Debug/OEM Unlock either btw.

Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?

voodooline said:
Have you tried flashing just the firmware, i havent flashed in years but i would assume you could sideload the firmware as well?
Click to expand...
Click to collapse
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.

150208 said:
Guess who didn't read? And after a year without flashing + a lack of reading skills, you still think you could solve this case? That's a spirit.
===
You better do pm some devs in dev section and point them to this thread and see if they can help, if you are still curious.
My guess is dead emmc, it can be replaced without buying the whole board.
Click to expand...
Click to collapse
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.

voodooline said:
I did read it, its funny always someone who has to be a **** about things. I should have been more specific. He was able to flash h2os. So he could try to flash the firmware for h2os to see if that gets it to boot.
Click to expand...
Click to collapse
Magnificent, bro.
You're a truly genius.

Abdroid tv box T9 RK3318 2gb ram 16gb rom stuck on TV logo after unroot with superSU

Hi all!
Some days ago I urooted my TV android tv box with superSU and then I restarted it. From that moment when I plug the device it only reach the T9 logo (not the android one) and don't go further.
I've tried different ways to try to unstuck it, but nothing has worked.
I tried:
- enter recovery boot by holding the button in the av hole -> nothing happens
- install new firmware with adb sideload with both ubuntu and windows 10 -> always get errors (often error: closed, sometime other errors that at the moment don't remember)
- install new firmware with sd card using SDCard Installer -> the device doesn't boot when the sd is inserted
Moreover, with adb in ubuntu sometimes it recognises the device and I can enter the adb shell (but obtain errors when try any tipe of command), and sometimes don't (after adb devices I see list of attached devices: ??????????????? offline)
Now I'm thinking to try to install an ubuntu like on an usb pendrive...
I will be very grateful of any help/suggestion to how to revive my device :fingers-crossed:
Thank you!!!

Does this happen to be a pendoo model? I have a pendoo x10 MAX and i actually simply just installed supersu while it was rooted. Since then, I haven't gotten this thing to boot. Just stays on the boot screen the entire way. I wiped in recovery, knew that'd do nothing. I just wanted a root MANAGER. I tried Magisk, my favorite.. no go.. so then I went a bit old school.. so I tried ChainFire's SuperSU.. and THAT updated the SU binary! It said it succeeded.. it asked to do recovery install or normal install.. on phones, I've always done normal.. so I chose normal. Plus.. this thing has no custom recovery. I found it on Amazon. Overpriced, but great with the controller it had. It looks like I'll need a replacement and maybe a request to ask this guy if he could possibly NOT use something like KingRoot/KingoRoot/AmaraRoot or ANY One click root tool.. they just cause more bloatware, inciting boot issues and problems within the Android box itself. These One Click Root tools are out of control. It's to the point where I need to find a way in to adb and find the firmware for the latest version of this thing... X10Max from Pendoo.. I have not found a thing anywhere regarding firmware, and their website is ****. NOTHING *anywhere* on these things.. hell I'm about to return it as I bought it for $72. I have another one, same model.. wondering if the root method was different. About to boot that up and find out. I'll even swap the board. At this point.. he rooted it.. the WRONG way.. you can MOUNT THE /SYSTEM PARTITION IN RECOVERY. THIS IS ANDROID 9 we're talking about--the recovery supported by API v3.
This can and should have a TWRP custom recovery. If none exists, don't bother. As long as you can mount /system then you have a chance, at least, to root the damn thing.. which is why I'm still messing with it. I have another two weeks to return it. I'll give it another couple of days before I call it off and just switch out the good board for the bad one, return it, then return the other one and just use it until I find a way to use a custom recovery on this thing. There has to be.. unless there is no firmware available in sight (for an RK3318 or 3328, can't tell.. recovery mode says 3328, model name says RK3318. I see no difference at the moment aside from processor naming at this point--maybe speed?)
I'm still a nub with Android TV boxes so don't hold it against me for updating the damn root binary. If I could find a way to just reinstall the entire firmware and delete all previous stuff, I would. It would be worth it to learn. I would then mount /system in recovery and soldier on.
One little issue with this thing.. there's only one USB port that actually works. Same applies for the same exact product, a replication of the same thing.. was a "replacement" that still have/has the same qualities.
I've ranted enough. I vote more research into RK33xx processors and possible custom recoveries. I'm about to look for it based on only the device itself.
Note: Been stuck at boot screen ever since the binary was updated. I felt it was necessary to have a boot manager. I don't know where to even find the firmware. Can.. anyone point me in any direction? Something that MIGHT work on this thing? Android 6 or 7 would even suffice, return or no return, as "stuck on boot screen" will be my complaint. That's.. the actual complaint. I can't just *flash it* like the old days.. and maybe the original Android 9.0 firmware would suffice.. I don't know, but Pendoo.. wouldn't that be preferred?

You will need an SDcard to recover this box. I think the T9 32GB 4GB rom will do the job since its a cut down version.
Make a update SDcard and pop it in and power on the box. It will start the recovery on its own.

hello, sorry for my English I live in France I would have a question about the box: TV T9 RK3318, 4gb / 64gb. the problem is that the time is desynchronized on restart and creates problems to connect to applications when the time is out of order, I tried everything changed the time zone to deactivate and entered the time Manual it goes out of order all the time . is there a custom version or a version 10?

Very cook did I checked this out awhile back alot of good information that's for your contribution

My XZ1 compact story

So I bought a new phone since my old Onyx (One+ X) died (cracked screen and charging port is getting iffy). And finally I decided on this one, a cheap Chinese docomo branded one off Ebay.
I was so exited when it arrived, the UPS truck was at my gate when I got home that day, ready to leave, but the driver was nice enough to wait and give me my package then and there. Pheew.
Well, now to my, bootloader unlocking, recovery flashing, after market os installation and rooting story...
Bootloader:
The phone was supposed to be unlocked, and I guess that only meant SIM unlocked, because the service menu read "Bootloader unlock allowed: no". Damn.
A few Duckduckgo searches later, turned up I needed the "S!Unlock tool" which I found a copy off online, but username/password fields needed to be filled in, and I think I found a pirated s/n which didn't seem to work, (might have if I had tried harder).
But since it was just over £22 at https://networkunlocking.com/ I thought I could spare that on the off chance it worked. I was very surprised when it finally did, truth, I needed a few tries. And it actually did turn that service menu's pesky "no" to a thumbs-up "yes". Yay!
So now, pulling the cable, holding "volume up" and inserting cable for that blue light goodness, and running the "flashtool.exe -i 0x???? oem unlock bootloader 0x????????????" comand.
Not so fast, that doesnät work with newer flashtool versions...
Finding the old one from my Xperia Arc days and runnning it again, Yay!
(Wish I had read ahead and done that temporary root trick to rip my DRM codes off my phone first. But I don't plan to revert to stock, and I gather (might be wrong) that the DRM is only needed for stock roms, and not Lineage OS and such.)
Recovery (TWRP):
Now the problems start for real, getting into recovery was a **** and a half. Most guides for the phone says to push "volume up" multiple times during the boot-process. This turns out to be plain wrong. The actual button combo is holding "volume down" and "power" button together atleast until the screen goes blank after the unlocked bootloader warning.
Now, I wanted 17.1 on the phone and the recommended TWRp is 3.1.1 or something, and this works to install lineage fine, but don't forget to erase /data partition as I did. Stupid mistake that made wifi fail miserably, and probably a lot of other stuff, that I never tried before noticing my mistake.
However trying to get my own set of ringtones on the phone turned out to be another issue, going back into recovery when I noticed my ringtone.zip had failed. Obviously the media folder had moved since los 15.1,so no wonder right? Turns out it wasn't the only problem. TWRP 3.1.1 (or something) failed to unencrypt the root partition, so changing anything via recovery was a lie. fortunately the latest recovery, 3.5.2_9 did. So after installing that everything was rosy peaches.
Rooting:
SuperSU? forget it.
Magisk? yeah, but how? No really good step by step guide out there, except download from the github page, but what version?
A little trial and error, tried with the arm64 version and it turned out to be the right one. (Sometimes you just get it right on the first try...)
Renamed the apk to .zip put it on the phones memory, entered recovery and installed the zip, et voi effing la, Magisk root installed.
Root checker verifies root status, TitaniumBackup and RootExplorer works. Yes, my phone is playing ball.
Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone. 4 hours or so wasted trying different versions rebooting and flashing. Getting back my Viber messages turned out to be a problem to, TitaniumBackup got the messages back, but the db had references to my old images on my old phone, and probable pointed at the wrong directory so trying to send images either from gallery or take new photos crashed the app. Solution, backup the messages to my google account, uninstall and reinstall viber and restore from that backup. TitaniumBAckup is good but no magic bullet, it's a ***** that we have to rely on Google for backups though, I am allergic to the cloud, something about it makes my skin crawl.
Otherwise I like the phone, it says docomo on the back, something I can live with. The Chinese vendor even supplied one glass screen protector for the phone and a clear soft plastic case, in case I wanted some extra protection. I only wish there was a screen protector that had the same surface as the one that was on the phone in the box, that slightly opaque cloudy feel was so nice on my finger.
Can I recommend this phone? Nah, if noone writes a step by step guide that will cut down the time I spent on making this phone palpatable, I can't. But if you, like me, don't mind to tinker and don't want a phablet or spend way too much for the privilege to get a screen size you don't want, then sure. But why do we have to get them from China?

My trusty xz1 compact is slowly dieing on me and i am looking for a replacement how much did you pay for yours and is a really new or just refurbished ?

"Final notes:
This above looks simple right? In fact this was a two day process since the guides are surely lacking for this phone, a lot of trial and error, the greatesthurdle was getting into Recovery, until I found the right button combo I accidently managed to enter it once making me believe I had the right combo and something was wrong with the phone"
This Phone is in the mobile Sphere already ancient. Don't expect to get any help here or newer hot to guides.
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.

muhschaf said:
my biggest problem is the fastboot recognition of my Windows. If this would work reliable i could better flash the phone but getting the right driver is a kind of roulette for this phone.
Click to expand...
Click to collapse
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com

4qx said:
Also had a non-connecting fastboot issue on Windows until I ran into this guide showing me it was not about a driver but an installation method:
How to install Sony Xperia Drivers Manually (Super Easy Guide)
Step-by-Step guidelines to install Sony Xperia Drivers Manually (this method can be used on Windows XP, Vista, Windows 7, Windows 8, 8.1 and Windows 10).
xperiausbdriver.com
Click to expand...
Click to collapse
Handy cannot boot now anyway so i would probably not able to recover anyway.

muhschaf said:
cannot boot now anyway so i would probably not able to recover anyway.
Click to expand...
Click to collapse
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?

4qx said:
The phone completely refuses to boot?
Do you have recovery installed? If not, are you able to install it via fastboot on linux?
Click to expand...
Click to collapse
okay i will explain.
i had this common issue with this running out of internal space (13GB pictures i could not find, only 300MB left) and after looking into it i figured, that, due to my constant app installing and deinstalling, i had literrally thousends of little images (thumbnails, icons, you name it) that got not deintalled for whatever reason and clogged up my internal memory. So i made a Backup and decided to completly wipe and flash the newest lilac from Modpunk (18.1) and did a big Mistake here. i go into recovery and wiped EVERYTHING...without checking that recovery is untouched. then during the same session i installed the ROM and rebooted...so far all nice and dandy. Setting up the Phone, then get the newsest Gapps and then try to reboot into recovery to install them...well did i mentioned that i had wiped EVERYTHING? Well, there was no recovery anymore. Not my first rodeo i headbutt myself into the desk and spun up ADB/fastboot...only to run into the same problem i run everytime due to improper intalled driver i forgot already about. Longs story short: after some time handy refused to boot also into system.
Phone is now unbootable into any state, but Black screen fastboot over hardware buttons...
i COULD still try to make a blind fastboot flash after following the driver install instruction from above, but consider my lucky or clumsyness i will **** this up too and only waste time. and due to my current covid recovery i have not the energy nor the patient to diddle around with this sorry excuse of an absolute restrictive Phone and rather get me a S5 mini or something else that has no bootlock whatsoever and let you flash it from the very start.
i am plain running out of patient with sonys harassment.
/€: Also the constant "cannot get root" on a rooted phone is plain BS³. having permanent trouble to install adaway or use my sdcard proper is so friggin annoying that i now will search for a android version that got rid of this bull**** and will buy any phone that is suported by that ROM.
It is MY phone, and not Goolge nor the the phone company will dictade what i can or cannot install on it. i decide and i carry the risk, period. and the biggest security reason holds the phone anyway.

@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.

4qx said:
@muhschaf okay so it doesn't seem bricked. Pretty sure you just need to flash the recovery through fastboot and flash a ROM. Try that on Windows with the driver method; if that fails boot a Linux distro e.g. EndeavourOS, even from a USB without installing no adb/fastboot driver is necessary for Linux, it just works. You can do it.
Click to expand...
Click to collapse
i known, the question is more "i really want that?" like i said i struggle with this phone ever since. and i realized yesterday the problem is not the phone itself, it's the bull**** of androids security architecture. Google seems to be very prone to make sure that they can shove any amount of advertisements down your throat. Given that they earn their money with ad network it doesn't surprise me.
i came to the conclusion that in reality i want to have a reliable way to install ad away on any given phone i own. i archive similar things on my desktop with Firefox and umatrix and ublock. And what can is say: Having Advertisment fee Internet is a bliss and i not care a bit about "but the free stuff" and i incrisingly fury about my inability to archive similar things on my phone i rely quite a bit.

@muhschaf I get it but you know what they say: good things require effort. But I find that once I set my Android up, I'm happy to have done it.
In regards to ads, you can actually install uBO on Android Firefox now, and many other addons also.

So i gave it a try again and the result was that it detects now a "?" under fastboot but ADB can't see anything failing sucsequently to flash recovery. i am also seemingly unable to get even into hardware fastboot anymore. But could be quite possible that the battery is already drained again. so i recharge it the night.
4qx: i was going away from uBO several years ago. Wonder that he has survived the drain after his "whitelist" decision, but it seems like.
Adaway block advertisement in apps and this is mainly the feature i wanted, see advertisment have gotten out of the browser itself into the Base/apps systems (Android, Windows) and therefore the Adblocker have to go with it. under windows i can control the System itself pretty easy and throughoutly with Powershell and package debloating scripts or regedit. under Android i haven't this option and have to rely on app like adaway. This shortcoming is pretty frustraing for an "Open Source" OS

After nearly a Year i stumble upon something windows related and now i have finally my xz1c back:
Windows USB Hubs of ANY kind (Monitor USB Hubs, Powers external USB Hubs, hell sometimes even the PCH, that is technical also a USB Hub), can and sometime WILL prevent proper lowlevel access to devices like...USB Headsets (Logitech Pro X) and Mobile Phones in fastboot mode (xz1c).
To circumvent this you have to connect the phone to a USB Port on the Back of your PC Motherboard DIRECTLY. every other Port can have an USB Hub in between that alters your write or readout and therefore failed the flashing.