Related
I've modified Robin's boot.img to disable forced encryption.
With encryption gone, you'll be able to use TWRP to flash mods etc, without having to wipe your data every single time.
Other benefits include faster performance and better battery life.
Unfortunately, to actually remove the encryption - you will need to format one last time.
But once done and set up, you'll see that your phone is no longer encrypted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
- Unlocked bootloader
- PC / Mac
- fastboot (+ USB drivers if needed) -or- existing TWRP install
Instructions:
If you're using TWRP:
1. Perform a factory reset from within TWRP and reboot back into it (Note: This isn't required if your upgrading from an existing unencrypted stock install).
2. Flash the included zip file
3. Reboot
Manual flash using fastboot:
1. Download the zip and extract the boot.img file
2. Reboot your Robin into fastboot mode
3. Flash using the command:
Code:
fastboot -i 0x2c3f flash boot boot.img
4. Factory reset. (This isn't required if your Robin is already unecrypted and you simply want to update your /boot)
Note: If you skip this step, your phone will remain encrypted.
5. Reboot
Rollback:
1. Re-Enable encryption from Settings -> Security -> Encrypt Phone
2. Flash the stock boot.img
Credits:
@reddv1 for the original modification instructions (adapted from Nexus 5X) and @osm0sis for AIK
----
Disclaimer: Disabling encryption on your phone *will* reduce it's security. These files / instructions are provided only for those who understand and accept the risks of using an un-encrypted device, and are comfortable with modifying the internals of their phone. I will not be held responsible for any loss or damages occurred as a result of following the instructions and/or downloading the files listed on this page.
Thanks, worked well!
Thank tested, will se if it gets any faster. Have been having some problem with lag that comes from time to time that I haven't seen on other devices.
Otherwise, great to see support for such a small phone!
The Robin devs are trying to be Community friendly as much as possible its good to see.
can it still be updated using this mod boot ?
kanded said:
can it still be updated using this mod boot ?
Click to expand...
Click to collapse
Unfortunately no, because the OTA includes an updated delta for the kernel as well (which means the /boot needs to be 100% stock).
If you want to install via the OTA, you need to restore the stock boot.img (and the system partition - if you're rooted or modified it in any way, and the recovery too, if you have TWRP installed).
Alternatively, you may simply flash the updated stock ROM zip on top of your existing install - just be sure to flash the new boot.img zip immediately after (as well as SuperSU and any other mods you may have, if you want to preserve your current setup).
Thank you for this [deXter] it works great.
However does anyone have a solution for how to get rid of the 5 sec nag screen popping up at reboot?
Thanks in advance/arc.
For June update 350 please.
I need help!
When I boot up and finish setup ,my battery percentage said : 3.0858 % and Wi-Fi wasn't turning on did I do something wrong?
Angeldgaf said:
When I boot up and finish setup ,my battery percentage said : 3.0858 % and Wi-Fi wasn't turning on did I do something wrong?
Click to expand...
Click to collapse
This mod only allows you to use your phone unencrypted - it shouldn't affect your battery or WiFi. Are you sure you flashed the correct version?
Goto Settings - About. If you're on the June 1 ROM (Build 00WW_1_350) then your kernel version should say 3.10.84 Wed Jun 1. If these numbers do not match then restore to the latest factory image/ROM and start over. Also, have you tried a factory reset yet?
For 450 Please
Updated for build 450.
Hi everybody! Just receveid the OTA notification
I'm currentyl on 6.0.1 1450 rooted with twrp, do you have the modified boot.img for the Nougat beta as well? Thanks
Many thanks for this work. Getting the Robin rooted and usable was a struggle compared to the Nexus4. This mod helped greatly.
Boot image for N88 please. Thanks in advance.
So did I understand right, I only can use this mod for stock ROM (not for LineageOS 14.1)?
Steffen1st said:
So did I understand right, I only can use this mod for stock ROM (not for LineageOS 14.1)?
Click to expand...
Click to collapse
Yes. Lineage does not have forced encryption.
[deXter] said:
I've modified Robin's boot.img to disable forced encryption.
With encryption gone, you'll be able to use TWRP to flash mods etc, without having to wipe your data every single time.
Other benefits include faster performance and better battery life.
Unfortunately, to actually remove the encryption - you will need to format one last time.
But once done and set up, you'll see that your phone is no longer encrypted.
Requirements:
- Unlocked bootloader
- PC / Mac
- fastboot (+ USB drivers if needed) -or- existing TWRP install
Instructions:
If you're using TWRP:
1. Perform a factory reset from within TWRP and reboot back into it (Note: This isn't required if your upgrading from an existing unencrypted stock install).
2. Flash the included zip file
3. Reboot
Manual flash using fastboot:
1. Download the zip and extract the boot.img file
2. Reboot your Robin into fastboot mode
3. Flash using the command:
Code:
fastboot -i 0x2c3f flash boot boot.img
4. Factory reset. (This isn't required if your Robin is already unecrypted and you simply want to update your /boot)
Note: If you skip this step, your phone will remain encrypted.
5. Reboot
Rollback:
1. Re-Enable encryption from Settings -> Security -> Encrypt Phone
2. Flash the stock boot.img
Credits:
@reddv1 for the original modification instructions (adapted from Nexus 5X) and @osm0sis for AIK
----
Disclaimer: Disabling encryption on your phone *will* reduce it's security. These files / instructions are provided only for those who understand and accept the risks of using an un-encrypted device, and are comfortable with modifying the internals of their phone. I will not be held responsible for any loss or damages occurred as a result of following the instructions and/or downloading the files listed on this page.
Click to expand...
Click to collapse
Boot.img for N108?
Use the modified FED Patcher for the Robin from this thread:
https://forum.xda-developers.com/ne...d-patcher-robin-forceencrypt-disable-t3352006
It worked fine for me on 108. After flashing the latest 108 7.1.1 file from the Razer forums, I flashed TWRP 3.1.0-0, then the FED Patcher, and finally Super SU 2.82.
Presenting the TWRP Recovery for Asus Zenfone Lite L1 (ZA551KL) (asus_x00r)(Treble Supported)(Encryption Fixed) Disclaimer : I am not responsible for any bricked device, all responsibility bears the user.
First Unlock Boot-loader using official asus ubl tool - Download UBL App
Team Win Recovery Project (TWRP) is the most famous custom recovery used by the people who like to flash custom roms, patches, flashable zips etc. The latest version is TWRP 3.2.3-0.
Flash zips through otg or Micro sd Cards as device is encrypted , if you format data and decry-pt then the Flashlight (torch) and the Camera will not Work.ENCRYPTION IS FIXED NOW
Installation By PC
1. Install fastboot tools - minimal adb and fastboot
2. Download twrp image and rename it as "twrp.img", then copy it to the Minimal ADB and Fastboot folder
3. Boot the device to fastboot mode - press and hold power button and volume down button
4. Connect device to pc
5. Open command prompt from Minimal ADB and Fastboot
6. Run command " fastboot flash recovery twrp.img "
7. Twrp will be flashed immediately
8. To boot in to twrp run " fastboot boot twrp.img " or disconnect device from pc and press and hold power button and volume up button
9. Device will be booted to twrp
NOW LETS DECRY-PT DATA
*Download the data Decrypt patch Zip :- Download
*Put it in otg (pendrive) or microsd card
*Then in twrp , Go to wipe section in twrp and tap on Format data (Important )
*Do not wipe data partiton , you have to format it
*then flash the Decrypt zip from your sdcard or pendrive
*after flashing wipe caches
*then reboot , and see camera and flashlight is working and Storage in Decrypted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Join telegram group for updates
Downloads:-
1. Minimal Fastboot and Adb
2.TWRP_3.2.3.0_asus_lite_l1
3. Decrypt Patch Download
Device tree
Credits:
@Ashish Gupta1999 (me)
Tester - for testing a lot of builds time to time
if you like my work you can donate me also
Dose it support g cam portrait mode
Yes works fantastic(front cam)
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
dexx121 said:
Doesn't work for me. Anyone have a working root method for Asus zenfone live L1?
Click to expand...
Click to collapse
Live l1 and lite l1 is a completely different devices
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
AndyYan said:
This TWRP actually partially works for Live L1 (ZA550KL, SD425). The problems are 1) it can't decrypt /data, 2) it fails to mount /xrom (which is inexistent on the Go variant) and 3) no ADB/MTP, but for flashing ROMs/addons, backing up and restoring, it works nicely. Just letting y'all know about it.
Click to expand...
Click to collapse
there is a specific twrp for live l1
Ashish Gupta1999 said:
there is a specific twrp for live l1
Click to expand...
Click to collapse
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
AndyYan said:
Can you link me to the one you know of? I just found another one from TWRP Builder, and it did fix most problems, but I still can't use decrypted data (shows "encryption unsuccessful" on boot). And it doesn't expose /vendor either which is a small letdown. <- Fixed by unpacking and editing recovery.fstab.
Click to expand...
Click to collapse
Contact me on telegram @yoursenpai1 i will provide you there
it works
Ashish Gupta1999 said:
Contact me on telegram @yoursenpai1 i will provide you there
Click to expand...
Click to collapse
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Abhicr said:
Something gone wrong. System in boot loop. Able to load TWRP through PC. Tried to flash a new ROM but only 2 options (Boot & Recovery) available. Please help
Click to expand...
Click to collapse
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Ashish Gupta1999 said:
All I know there is no rom for this device as of now , if you flash a gsi , it. Will definitely show system image option , for now flash stock rom using stock recovery to unbrick
Click to expand...
Click to collapse
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Abhicr said:
I used a GSI to update from Oreo to Pie. But the TWRP has only 2 options (boot & Recovery) to flash the .img file. However, I did a restore & back with the old Oreo. I want to upgrade my Asus Lite 1 to Pie!! Is there any possibility to get the mobile back to the factory state including recovery? So, that I can begin from one.
Click to expand...
Click to collapse
Well there is a fastboot rom available in my telegram channel of lite l1 check in there
Accidentally deleted the OS and now the mobile isn't even switching on. Any solution for this? Anyway I can install an OS ?
My mobile is ASUS Zenfone Lite L1.
Team Win Recovery Project 3.4.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: S20/S20+/S20 Ultra(Exynos variants)
Download
Sources:
Kernel source
TWRP source
Device Tree: Sorry are not under GPL License since are my own so they will not get released
Changelog:
06.12.2020
- Updated TWRP Source
- Adb Push works now without disable MTP in settings
- Fixed the bug where TWRP dont saved settings
- Updated DTB and DTBO for boot on One UI 3.0 (Use Magisk 21.1 for root One UI 3.0)
- Boot only with USB Cable or USB OTG connected (THX samsung for this stupid change in the bootloader)
- Removed decrypter from download folder (use Multidisabler 2.6 instead)
03.09.2020
- Twrp boots now without nulled Vbmeta.img
03.09.2020
- Fixed Optics and Prism Backup and Restore
- Brightness is now no more at max
- CPEFS error is gone
- Sec-EFS added in the FStab
19.08.2020
-Initial Release
Bugs:
-MTP and Encryption (ADB PUSH WORKS when you disable mtp in TWRP mount settings!)
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy S20/S20+/S20 Ultra, Kernel for the Samsung Galaxy S20
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2020-08-19
Created 2020-08-19
Last Updated 2020-12-06
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with vol up+ vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp and install multidisabler (you find it here on xda!)
Flash Latest Magisk
press reboot to system in twrp.
Thank you.
Thanks ?
Awesome job bro you rock !!!! ???
You Legend
Thanks a lot great job.
Question:: If I'm already rooted with Linage recovery I can just flash TWRP in Odin skipping all the other steps , correct?
Will there be too for Snapdragon Variante of s20?
golfgtiedition30 said:
Thanks a lot great job.
Question:: If I'm already rooted with Linage recovery I can just flash TWRP in Odin skipping all the other steps , correct?
Click to expand...
Click to collapse
Yes then you cam flash only twrp. But remember that zips made for lineage recovery dont flashes in twrp since twrp mounts the partitions differently
golfgtiedition30 said:
Thanks a lot great job.
Question:: If I'm already rooted with Linage recovery I can just flash TWRP in Odin skipping all the other steps , correct?
Click to expand...
Click to collapse
Hi all
thanks for the great job
me it's the same, does it work if I just flash the zip?
geiti94 said:
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with power + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field (if you want to patch twrp byself patch the downloaded tar in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp and disable encryption! (i will post today or tomorrow a encryption remover made for twrp with super.img partition!)
Flash Latest Magisk
press reboot to system in twrp.
Click to expand...
Click to collapse
I am getting this error while formatting the data: failed to mount '/cpefs' (read-only file system)
LENO7 said:
I am getting this error while formatting the data: failed to mount '/cpefs' (read-only file system)
Click to expand...
Click to collapse
its normal since is a read only partition. you can ignore that error
Hi after flashing twrp with odin my galaxy s20 refuses to boot.
I see the warning that I have no offical samsung software and then I boots straigt to the entering fastboot screen.
Any idea how to fix that?
acocalypso said:
Hi after flashing twrp with odin my galaxy s20 refuses to boot.
I see the warning that I have no offical samsung software and then I boots straigt to the entering fastboot screen.
Any idea how to fix that?
Click to expand...
Click to collapse
on newest bootloader when you see s20 splash you need directly to release the buttons or he will boot in fastboot mode
thanks ... can you flash rom gsi?
Legend geiti right way for S20 Series
Jenanga said:
Legend geiti right way for S20 Series
Click to expand...
Click to collapse
this is coming soon too
Jenanga said:
Legend geiti right way for S20 Series
Click to expand...
Click to collapse
where you can search, in google I can't find it
Why am I banned from telegram?
Are we able to do a complete backup/restore? as per previous versions on other models?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- = EDGE PURE EDITION = -
Custom ROM based on Stock firmware RPDS31.Q4U-39-26-4-2
This custom ROM uses stock kernel without modification. The source for the stock kernel is not released by the OEM.
Preliminary requirements:
- Unlocked bootloader.
- New and Clean Stock firmware is required!
- TWRP installed;
- Micro SDCard or USB flash drive should be formatted to exFAT.
What's done:
- Removed the restriction on writing to the system, which in Android 10 is in Read Only (r/o) mode by default, which eliminates the possibility of modifying it. In this firmware it is possible to mount the system in Read Write (r/w) mode. Encryption is preserved in this case.
- System passes SafetyNet test, device is certified (in Magisk settings activate "Magisk Hide" function, in "Magisk Hide" tab give permission for Google Play Services, perform Google Play reset);
- Cleaned and lightened the system;
- Built in additional system color accents;
- Built in and updated to the latest versions at the time of firmware and Apps release . YouTube removed, because I use YouTube Vanced;
- Installed apps AdAway ad blocker, Command Center 2;
- Ringtones, notifications, alarms sounds have been replaced.
🛠 Installation:
1. Extract the system image from the archive (see tab "Download") and copy it to the SD Card.
Also copy the "Magisk Installer" archive Magisk-disable-dm-verity-v21.4.zip in to the SD Card.
2. Reboot the device into bootloader mode and then into TWRP.
3. Installing the ROM image. In the "Install" tab in the lower right corner, click the "Install img" button and select the firmware image. A window will open, where you will need to select the "Super" partition. "Swipe to confirm".
4. Go to the "Reboot" section and reboot the device back to Recovery.
5. Go to "Wipe" and do a "Swipe to Factory Reset ".
6. Install "Magisk-disable-dm-verity-v21.4.zip". Reboot in to the System.
7. When the boot is complete make the initial settings.
8. Launch the "Magisk Manager" app and update it. You will be asked to configure the work environment. Agree. Phone will automatically reboot itself when setup is done.
Download
Edge_R_Pure_Edition_02-1
Edge_Q_Pure_Edition_nowrz_04-2
Advanced
YouTube Vanced v.14.21.54 Black Magisk
Proven, absolutely trouble-free version of YouTube Vanced.
To prevent in Play Market from updating in to the stock YouTube app, you need to add empty file with the name "enable_detach" (without extension) into the folder "/cache" (at the root of file system) using RootExplorer and rebooting your phone. One minute after the reboot, the application will unbind from the Market.
Enjoy!
Can i Flash from Lineage or need stay in stock?
VitilinVk said:
Can i Flash from Lineage or need stay in stock?
Click to expand...
Click to collapse
"New and Clean Stock firmware is required"
Upgraded Edge Pure Edition!
- created an image in a different format which reduced its size by 6 GB;
- full mount of system in r/w and r/o, allowing the system to boot up fully if you forget to put the system in r/o after making edits to the system partitions;
- updated GApps to the base of 27/02/21.
I'm not sure if you actually know the rules but wrz are not allowed
Upgraded Edge Pure Edition!
- updated ROM to the latest versions of stock firmware QPD30.114-80-4 (09 March 2021) ;
- updated GApps to the base of 12/03/21.
Upgraded Edge Pure Edition!
- Chrome bug fixed
Updated the ROM to a version based on Android 11(R).
Anyone using this daily?
I use. Why can't this ROM be used as the main firmware?
Hi, I tried installing the android 11 version of this from after clean restoring to stock. I installed the .img to the super partition and the phone wont boot. I get the "unable to open block device /dev/block/loop (20, 19, 18, 17): no such device or address. Any help? Thanks
Have you fully read and followed all the points in the instructions? Have you installed Magisk?
To install Edge_R_Pure_Edition, the firmware RPD31.Q4U-39-26-4, Android 11, must be installed on the device.
Download Stock Android 11
Nicktsaab said:
I get the "unable to open block device /dev/block/loop (20, 19, 18, 17): no such device or address.
Click to expand...
Click to collapse
This message appears because TWRP is not adapted to Android 11. Ignore it.
ilia3367 said:
Have you fully read and followed all the points in the instructions? Have you installed Magisk?
To install Edge_R_Pure_Edition, the firmware RPD31.Q4U-39-26-4, Android 11, must be installed on the device.
Download Stock Android 11
Click to expand...
Click to collapse
Ahh thank you, I was trying to install on the Android 10 base. Thanks!
what is the difference between r and q? android 10 and 11 i assume?
also ive been out of the rom loop for quite a while (lg g8, just got unlock like a month ago), what is wrz and why is it not allowed? just curious.
im having a weird issue. i bought 2 edges recently, and wanted to install this rom. both are on final android 10 firmware, and im flashing the q img. obviously both are bootloader unlocked and using twrp 3.5.2.
i followed instructions on one, and it went perfectly fine no issues. on the second whenever i flash the image it wont boot and the twrp log has a few errors about partitions. also there are 2 super partitions listed. even restoring my bone stock twrp image or flashing the factory fimware i have the same issue and the twin super partitions persist. the phone will boot on the stock rom fine however.
edit: weirdness continues, now all of the sudden the rom image flashed perfectly fine, when i rebooted back to twrp for magisk.zip i had no errors. however there STILL is 2 supers listed. but i flashed magisk and booted to system... and it boots. idk.
in the select partition to flash to menu the partitions listed (in order) are: boot, dtbo, boot logo, recovery, super, vbmeta, vbmeta system, super. ive tried both instances of super and both had problems except for this time where it succeeded (i did the first instance this time).
i should also note that this was like this when i made my initial twrp backup, there were 2 super partitions in the backup menu. but, the other phone that had no issues, did NOT have 2 super partitions at any point. again... idk.
Unfortunately, I didn't understand a lot of it, because I don't know English very well.
The fact that in TWRP in Backup you see two Super partitions, it's not a big deal. Choose both, but in fact your backup will have one Super partition.
its just strange but i guess if it works.
but im also having issues with applications. for one, the asus gallery and file browser that are bundled always ask for storaage permissions, even if i grant them they wont launch and keep asking for permissions. wipe data, force stop, grant permissions again, nope they still ask for permissions. i dont know whats going on with them. also i cant set a picture wallpaper. not with gallery, google photos, google gallery, nothing. i get a notification that says "error, could not load media" every time i do it no matter what app i try to use. live wallpapers are fine.
There should be no such problems. This behavior can only be when you try to make these applications (Asus Gallery, Asus File Manager) system applications using, for example, RootExplorer.
I don't have this problem even after restoring a backup.
Install ROM on a clean, re-installed stock firmware.
Hi, is there a simple and WORKING method to decrypt data on EMUI 9.1? On stock and custom ROM? ( I mean DATA section without encryption, you can interact with it in TWRP).
Thanks in advance.
avenger.forsyth said:
Hi, is there a simple and WORKING method to decrypt data on EMUI 9.1? On stock and custom ROM? ( I mean DATA section without encryption, you can interact with it in TWRP).
Thanks in advance.
Click to expand...
Click to collapse
Hello, I sometimes use the following methods.
Unfortunately a factory reset is required.
CUSTOM GSI ROM
Requirements:
- Root
- TWRP (installed over eRecovery, it makes things easier)
- Stock recovery
1. Download the patch
https://mega.nz/file/UptUzCpZ#GbVkUz-e7_Z09D8z3h3Vdbrcq56WDge1A-J9J-pXr0Q
2. In TWRP mount Vendor
3. Flash the .zip patch
4. In TWRP boot into stock recovery and perform factory reset
5. Reboot
STOCK EMUI 9.1
Requirements:
- Root
- Root file manager (Solid Explorer)
1. Install root file manager
2. Open > root/vendor/etc/fstab.hi6250 and
delete all references to 'aes 256' in the line relate to the /data
3. Save changes.
4. Factory reset in Stock recovery.
5. Reboot.
Screenshot shows modified fstab.6250
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you man!
-Alf- said:
Hello, I sometimes use the following methods.
Unfortunately a factory reset is required.
CUSTOM GSI ROM
Requirements:
- Root
- TWRP (installed over eRecovery, it makes things easier)
- Stock recovery
1. Download the patch
https://mega.nz/file/UptUzCpZ#GbVkUz-e7_Z09D8z3h3Vdbrcq56WDge1A-J9J-pXr0Q
2. In TWRP mount Vendor
3. Flash the .zip patch
4. In TWRP boot into stock recovery and perform factory reset
5. Reboot
STOCK EMUI 9.1
Requirements:
- Root
- Root file manager (Solid Explorer)
1. Install root file manager
2. Open > root/vendor/etc/fstab.hi6250 and
delete all references to 'aes 256' in the line relate to the /data
3. Save changes.
4. Factory reset in Stock recovery.
5. Reboot.
Screenshot shows modified fstab.6250
View attachment 5385631
Click to expand...
Click to collapse
data still crypted even after doing that
-Alf- said:
Hello, I sometimes use the following methods.
Unfortunately a factory reset is required.
CUSTOM GSI ROM
Requirements:
- Root
- TWRP (installed over eRecovery, it makes things easier)
- Stock recovery
1. Download the patch
https://mega.nz/file/UptUzCpZ#GbVkUz-e7_Z09D8z3h3Vdbrcq56WDge1A-J9J-pXr0Q
2. In TWRP mount Vendor
3. Flash the .zip patch
4. In TWRP boot into stock recovery and perform factory reset
5. Reboot
STOCK EMUI 9.1
Requirements:
- Root
- Root file manager (Solid Explorer)
1. Install root file manager
2. Open > root/vendor/etc/fstab.hi6250 and
delete all references to 'aes 256' in the line relate to the /data
3. Save changes.
4. Factory reset in Stock recovery.
5. Reboot.
Screenshot shows modified fstab.6250
View attachment 5385631
Click to expand...
Click to collapse
I cannot factory reset in stock recovery since the recovery is used for root acces with magisk
jackosbick said:
I cannot factory reset in stock recovery since the recovery is used for root acces with magisk
Click to expand...
Click to collapse
You can
https://forum.xda-developers.com/t/usb-wont-working.4368409/post-86020235
-Alf- said:
You can
https://forum.xda-developers.com/t/usb-wont-working.4368409/post-86020235
Click to expand...
Click to collapse
not working for me, i can keep doing that even 30 times till the phone boot the system
jackosbick said:
not working for me
Click to expand...
Click to collapse
And is there anything that works for you?
-Alf- said:
And is there anything that works for you?
Click to expand...
Click to collapse
I think not, i'm starting to lose hope...
-Alf- said:
And is there anything that works for you?
Click to expand...
Click to collapse
now i'm facing a new problem which i can't determine if is better or worse than the previous one, in twrp i can now see the normal folders ,which i could not before (Alarms, Android, DCIM,....), but they're into the /sdcard folder in the list of the folders named acct, cache, config, cust... any suggestions?