I have the OP11 on order to arrive in a few days but not many cases are available now. Many are pre order to arrive in March.
I found this case at a good price and style I like and it shipped instantly. It will make a good starter case.
For anyone else that might be looking.
Olixar Black Woven Style Case - For OnePlus 11
This Olixar case is the perfect choice for those who need both the looks & protection! A protective, non-slip TPU material is paired with an eye-catching, woven nylon print to make sure your OnePlus 11 looks good & is fully protected from accidents.
www.mobilefun.co.uk
Related
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Personally I like the Leather style flip cases, The one that doubles up as a wallet.
http://www.ebay.co.uk/itm/BLACK-WAL..._MobilePhonesCasesPouches&hash=item3374db7913
I would never pay more than £10 (delivered) for a case.
in terms of slimness i've basically narrowed it down to two giants.
1. sgp ultra thin
2. casemate barely there.
not sure which ones better but from what i can tell they're pretty much the same, both at a hefty 25 bucks.
anyways, i'm in the same boat as you. XD
not sure which case to get.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the rearth and it is very slim, the only down side it is a beeeoootch to take off (i have a dock/charger for the phone) and if you take it on and off a lot it cracks and the part closet to the usb port cover, nothing earth shattering it actually makes it much easier to take the case off - that and the sgp ultra clear and it is almost like having nothing on the phone at all.
I have used diztronic cases for the last year (for my SII and now my N7000). They are very similar to the boxweave case you posted.
http://www.amazon.com/Diztronic-Fle...0386413&sr=8-3&keywords=diztronic+galaxy+note
As you know TPU protects like a silicon case but doesn't stick in your pocket or collect lint and dust due to it not being "sticky" feeling. I recently sold my SII for over $300 after 8 months of daily use because my SII was in perfect condition as a result of being in a diztronic tpu case. No, I never dropped the phone on cement or anything but I dropped my SII on the carpet from 5+ feet and the phone was unchanged when I picked it up. Didn't pop out of case or battery, etc. Because the tpu cases have a 1/8 or so "lip" on the front they also allow the phone to be placed face down on flat surfaces. IMHO and experience, a good tpu case is all you need to fully protect your phone unless you work in construction or somehow expect to drop it on cement.
So, my vote goes to the boxweave or diztronic cases. BTW I got 2 diztronics for $14 from amazon, the black matte and smoke matte. Great deal!
^I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
Anyway, Thanks for the input so far guys, keep it coming.
bumper TPU from Amazon
I'm actually thinking of getting a real cheap TPU case like that I can mod. My ideal case is a TPU Bumper, maybe the Boxwave Black out without the back part but have the vol and power buttons cut out. I guess it's just not feasible so far... ?
first post here,
I have one of these.
search amazon for bumper cases.
I'm not allowed to post urls.
I like it, I have it on right now. What I have is different from what's
in the pictures. No cutouts for the buttons and the other cutouts are not
as big. The covers of the buttons are pretty sensitive, unlike the covers
for the Boxwave type which I got from Hongkong for 2 bucks.
Check amazon out, they have a lot of cases.
I also have the elago Breathe case, I love them I have two.
I ended up taking my chances on this. I guess it's going to be as close as I get. Thanks everyone, I'll let you know how it is when I get it.
vipfreak said:
I wanted a as slim as possible case and I wanted it to protect all the way around the perimeter of the phone. Here are the choices (in order from first to last), help me decide.
Rearth Ringke Slim - At $28 it's a bit expensive and it doesn't cover the sides. Also looks to be less grippy since it's hard smooth plastic.
BoxWave Blackout - I'm worried it's thicker than a case like the Rearth, but with that said it protects all around and is really cheap at $12. I think the material is more rubber like which sounds more appealing to a gloss hard case. Not many reviews anywhere for this case.
elago G4elago G4 - I'm not sure about this case in general.
Thanks for your input.
Click to expand...
Click to collapse
I have the 3 of them
Go for the Rearth Ringke Slim , is THE BEST OF ALL !!!
Hi all, I'm in a similar dilemma.
I've got a choice between these two:
https://www.gearzap.com/media/catalog/product/3/4/34484-2.jpg
and
http://www.ebay.co.uk/itm/HYBRID-SI...lePhonesCasesPouches&var=&hash=item416682f7b6
I know I should pick the Zenus, but would the inside bit that holds my phone scratch the outer bezel? And since the hybrid one has a silicon case THEN a hard outer shell I figured it would be good too. Any ideas?
Thanks!
I use a an SGP Ultra thin. Comfortable case. Considering the size of the phone the case is great. Merges with the Phone. +1 anytime.
I ordered this one http://www.ebay.co.uk/itm/160732471512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It has a stand that works in both axis.
good
Nice
Hi All,
I just got my Moto G, and i am now looking at buying a case for it. I am not really favoured towards the official motorolla ones listed in Flipkart.
I am looking for something below Rs. 400. Also it should give me the matte finish intead of the plastic and should be covering all the edges.
I found few online below are the links. Not sure if they are worthy.
all your views will ba appreciated.
http://www.ebay.in/itm/For-Motorola...?pt=IN_Mobile_Accessories&hash=item417e0b45ab
http://www.ebay.in/itm/High-Quality...?pt=IN_Mobile_Accessories&hash=item27e09770e3
http://www.ebay.in/itm/MOTO-G-BLACK...?pt=IN_Mobile_Accessories&hash=item3f32314495
I got this
HEY, I bought the Amzer case for moto G. its great man. i have used amzer products earlier too..theyare super durable,fits perfectly & provide protection too
w ww . ebay . in/ itm/ AMZER-PUDDING-TPU-SKIN-CASE-BACK-COVER-CARRY-POUCH-FOR-MOTOROLA-MOTO-G-XT1032-/111249202278?pt=IN_Mobile_Accessories&hash=item19e6f81c66 (remove gaps from link)
This one...it has matt back too
Thanks buddy. It is good. But i m chking if i can get any hard case one before ending up in buying amzer.
I am using the Amzer case too which I ordered from flipkart, I think its the perfect case and it has a nice finish too. (though I think I'll use a very fine sandpaper to make the sides of this cover matte instead of the slippery gloss it is.)
BUt seriously, Amzer is the one you should go for instead of some other cheap ones which cost Rs. 100-150 less than Amzer cover, it provides excellent drop protection and doesnt add as much bulk as you'd expect from a TPU case.
thegreatsid said:
I am using the Amzer case too which I ordered from flipkart, I think its the perfect case and it has a nice finish too. (though I think I'll use a very fine sandpaper to make the sides of this cover matte instead of the slippery gloss it is.)
BUt seriously, Amzer is the one you should go for instead of some other cheap ones which cost Rs. 100-150 less than Amzer cover, it provides excellent drop protection and doesnt add as much bulk as you'd expect from a TPU case.
Click to expand...
Click to collapse
Amzer makes a couple different designs from what I can tell. The 'hybrid' one looks like it would provide drop protection through the two layers, but it's bulky IMO. The other one just appears to be a snap on hard case, not sure it would do much good if you dropped your phone, but would protect it from scratches at least.
Ive ordered a bumper case like this :
h t t p://w w w. ebay . in/itm/New-Stylish-Flexible-Bumper-Cover-Case-Pouch-Frame-For-Motorola-Moto-G-/281313189789?pt=IN_Mobile_Accessories&var&hash=item417f929f9d&_uhb=1
Yet to receive. I dont expect much protection but atleast for times when we keep the phone on table etc...this should be fine I guess.
Had bought a cheap flip cover earlier (not much choice was available back then in india for moto g). And the plastic back of the flip cover broke already...upon removing just twice!
http://www.amazon.com/TUDIA-Melody-...&qid=1407537819&sr=1-8&keywords="Oneplus+One"
Yay, another new case! From Tudia, available for pre-order on Amazon.
I believe this will be the thinnest one we'll get. Don't care for the texture though.
I have used this one for several phones including my Nexus 5. I like it as it seems to be a little more grippy on the sides compared to the diztronic. I did not like the design on the back at first but it does not bother me anymore.
Will be travelling to very remote sites in Africa in a couple of months and I will need some protection for the One.
I have the Pelosi, which I think is a fake and it adds 0.1% of protection if you know what I mean.
My wife still has the UAG for the S3, which used to belong to me, which has done a more than perfect job over the last 2 years. Phone and cover still look brand new despite having to be in harsh conditions.
So basically I am looking for a rubberish TPU type that protects corners in a fall.
there is no real case for the one.. the best you can get is some tpu case , i have the TUDIA case and its fine..
but its not Otterbox
the new TUDIA looks promising
TUDIA Slim-Fit CYGEN Dual Layer Protective Case for OnePlus One
The best I've found is the new tudia case ! I have it and love it !
I have the Cruzerlite Bugroid and I assure you that covers perfectly the phone.
I have the Diztronic tpu case and the Rearth Ringke Fusion case. Both cases are great but the Ringke Fusion provides more protection. I would highly recommend buying it.
ive got the tudia cygen dual layer.. the inner rubber part fits perfect, and the hardshell fits about 95% perfect. It bows a little at the bottom where it wraps so the corners dont wrap quite as snug on the bottom as it does on the top. Other than that, this is my favorite case so far. Ive got10 or so cases for my OPO and this one by far has stayed on the phone the longest.
i am really looking forward to buy a nice case for my nexus 5 (also cheap)
Are this worth buying ?
http://www.ebay.in/itm/321781963774?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.in/itm/321781963499?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
http://www.ebay.in/itm/321781963792?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
waiting for replies
Thanx in advance
I personally use spigen and metal/aliminium bumper. Both are top quality cases. But since i got dbrand skin i cant use bumper. Rest is okay. So i will suggest you spigen and bumper. But didnt use any battery case. (also they re so big and ugly in my opinion)
The only good one I see is the spigen. There are tons out there, keep looking.
That also isn't a genuine Spigen case. It looks like one of the cheap Chinese clones.
You can see the exact same picture here:
http://www.aliexpress.com/item/Slim-Luxury-Armor-PC-TPU-Dual-Layer-Cool-Case-For-LG-Nexus5-Mobile-Phone-Accessories-With/32272128275.html
I use this one http://www.amazon.com/Nexus-Case-Protection-Absorption-Premium/dp/B00EPLTFIS
Very happy with it,my phone took some pretty bad hits but it was ok
Looks good,and you can customize the back with a picture of your choice,there are templates on xda....or just apply some carbon skin on it and still looks good !
try metal/aliminium bumper it will defend the device much great then plastic.
Recommended cases for N5
I just bought a Nillkin Nexus 5 case. Ultra Slim.
Nillkin makes great cases that offer maximum protection with a minimal profile.
And I recommend these:
LG Hardshell Nexus 5 Black (US)
TEMEI Ultra-thin Protective TPU Back Case for LG Nexus 5
Diztronic Matte Back Black Flexible TPU Case for LG Nexus 5
I use the Spigen Slim Armor, its awesome, I have occasionally switched between the Spigon:
http://www.amazon.com/Nexus-Case-Sp...1435952280&sr=8-1&keywords=slim+armor+nexus+5
And this one: (because its cool looking and I get compliments)
http://www.amazon.com/Nexus-Cruzerl...d=1435952889&sr=8-1&keywords=nexus+5+bugdroid