Related
Just going to dump all the info I've found about this device into this thread. All the threads pertaining to this thread are in Russian and I can't read Russian, so this might be helpful to any English speaking owners of this tablet.
Special thanks to Telegram user @SSDD_1744 (don't know your XDA/Reddit user, I'm sorry) for basically spoonfeeding me all these instructions!
WARNING: If you need to flash to stock for whatever reason, be sure to download a image file specific to your country. If you don't, you'll hard brick your device that can only be fixed QPST (supposedly).
Rooting:
(Tested on 5.0.2)
Install KingRoot. Let it root your device.
Install Super-SU Me, to get rid of the bloatware that comes with KingRoot.
Installing Xposed:
I used Flashify to flash TWRP. Be sure to flash the right version though (2.8.7.7 v2) or else you won't be able to mount cache.
Then download Xposed (version sdk21 ARM) and flash it.
WARNING: Flash v1 of the modded TWRP and you won't be able install any apps after flashing Xposed.
Unbricking:
Still working on it. Downloaded QPST but have not been able to get QPST 2.7 to read the tablet.
Links:
Discussion:
https://translate.googleusercontent...690491&usg=ALkJrhiWSlkbZ-tUofZx68NPSGIv8pjIPA
Root:
https://translate.googleusercontent...JrhhQszcRvUo8HILThvz57JmsLj4L9g#entry44556703
https://translate.googleusercontent...JrhiCt__6apcRhk-gtcBExYJCnC9nGQ#entry41676452
Instructions for obtaining the rights to Ruth phones / tablets.
Tested on Android 4.4+
perhaps this algorithm works on Android 5+, I have no way to verify
All transactions with their phones / tablets are performing at your own risk !!!
To get started, read this post from start to finish and only then proceed to action!
Introduction
This instruction is written based on my own experience obtaining root on their plates, and then on the Xperia M2, bought plemyashki. For instructions attached versions of applications that were relevant at the time, the new version can download the relevant topics on the forum, there will find all information on how to work with the proposed programs and algorithms for their actions (links to topics added).
For all the action with your phone / tablet you are responsible for yourself!
Download all the necessary tools to obtain Root (of instructions / topics on the forum), obespechte for phone / tablet access to the Internet (Wi-F / mobile data) and let the phone settings / tablet installation from unknown sources.
Needed Downloads
KingRoot_V4.5.0B202.apk (6.76 MB)
Me_5.9.apk-SuperSU (9.07 MB)
V2.49 Beta.apk SuperSU (5.63 MB)
eu.chainfire.supersu.pro.205.apk (52,88 KB)
Next in series:
1. Install KingRoot .
Get Ruth's right, in the device may reboot.
2. Set SuperSU-Me, .
Run the grantor, the program deletes KingRoot and Chinese KingUser with replacement SuperSu.
Remove the longer SuperSu-Me the desired program.
3. Obnovyaem SuperSu to the latest version. Then set PRO-key .
Installing Pro-key Optionally !!! Use Cases SuperSu without installing key .
4. Open SuperSu and on-demand update binary SU normal way. After a successful update, confirm the request to restart.
5. To make sure that everything is done correctly, check the correct installation and operation of Ruth (mount the system partition on the record), I used the Root Checker Pro and Root Explorer , respectively.
The output is a complete rut without kitayschiny with SuperSu Pro. We use and enjoy
Click to expand...
Click to collapse
Unlocking bootloader (haven't tried this):
https://translate.googleusercontent...Jrhh6g4wI-8Hb_LzAcPnIUxYvWNzZ0A#entry46711087
Stock firmware:
https://translate.googleusercontent...?s=&showtopic=703414&view=findpost&p=45272695
Damn, development has really boomed on this little tablet! Finally got it back after a few months (I sent it into Asus to repair it for me).
Stock ROM:
https://www.asus.com/ru/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (I can't get the English version to load, delete the /ru/ and you'll be redirected to the English site)
https://www.asus.com.cn/Tablets/ASUS_ZenPad_80_Z380KL/HelpDesk_Download/ (Chinese site)
==== REMEMBER TO DOWNLOAD THE CORRECT COUNTRY OR YOU'LL BE BRICKED) ====
https://yadi.sk/d/b1NMLXHBsNV8C (latest software for the worldwide model)
[http://4pda.ru/forum/index.php?showtopic=703414&st=320#entry50270292]
http://4pda.ru/forum/index.php?showtopic=703414&st=200#entry49389176 (Asus Flash Tool and stock ROM v4.8.2 WW [WorldWide])
Unlocking bootloader:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48200665 (use fastboot oem device-info to check if it's unlocked)
Root:
http://4pda.ru/forum/index.php?showtopic=690491&st=580#entry44778545 (KingRoot - you'll need a 4PDA.ru account to download this)
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (last section of the post)
CM13:
http://get.cm/?device=P024&type=nightly
https://vasy.ru/CM13/
http://forum.xda-developers.com/android/help/asus-zenpad-8-z380kl-custom-rom-t3370277
http://forum.xda-developers.com/android/development/kernel-asus-z380kl-p024-kcal2-t3405595 (Kernel)
Recovery:
https://vasy.ru/TWRP/P024/
http://4pda.ru/forum/index.php?showtopic=690491&st=1220#entry48094504 (TWRP 2.8.7.0)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051
Guides:
http://4pda.ru/forum/index.php?showtopic=690491&st=1280#entry48185323 (this has a lot of instructions: root, recovery, boot partition restore, adb drivers etc.)
http://forum.xda-developers.com/android/help/asus-zenpad-8-0-z380kl-bootloop-t3373051 (this has a bunch of files, Resurrection Remix [I haven't tested it yet tho], and instructions on getting out a bootloop)
http://4pda.ru/forum/index.php?showtopic=690491&st=1640#entry49724823 (flashing stock software)
If you want to open the engineering menu, type " * # * # 4636 # * # * "
To boot into fastboot, restart/turn on the device and hold volume up. It'll pop you into a menu with three options.
To boot into recovery, from the fastboot screen (three options), use the volume buttons and navigate to the second option "factory reset" and hit power to confirm. It'll boot into recovery.
=====================================================================================
Recommended way to flash ROMs:
1) Download TWRP. Use adb to boot (NOT flash) into TWRP. Flash ROM there.
2) use KingRoot to root. Use Flashify to flash the ROM.
======================================================================================
If you want to go look up some more info or guides, go here:
http://4pda.ru/forum/index.php?act=...=rel&subforums=0&query=z380kl&forums=570&st=0
and use GTranslate to translate the page. The first page is the earliest posts with the keyword, the last page are the latest post.
please add these ROM's for this Device:
Ressurection Remix:
https://www.androidfilehost.com/?w=files&flid=121811
AICP 12.1:
https://www.androidfilehost.com/?w=files&flid=136181
The latest Official ROM P024 model:
http://dlcdnet.asus.com/pub/ASUS/Ee...ser.zip?_ga=1.109506565.1670552787.1483182775
ZenPad 8 Z380KL Firmware: V5.9.0.0 (WW SKU version only)
Improved Item:
1. Update Google security patch
2. Support unlock tool
9008 brick info:
https://4pda.ru/forum/index.php?showtopic=643084
Pertaining to p024:
https://4pda.ru/forum/index.php?showtopic=643084&st=5740
https://4pda.ru/forum/index.php?showtopic=643084&st=3660 (page 179 - 180, 183 - 185 discusses the files needed to unbrick and how you would - CTRL + F Russ and read the people who quote him)
How I bricked: https://4pda.ru/forum/index.php?showtopic=703414&st=180#entry49329798
https://4pda.ru/forum/index.php?showtopic=690491&st=1420#entry48527044 (unbricking files - dead link though)
https://4pda.ru/forum/index.php?showtopic=703414&st=140 (discussing how to fix using the images from the dump)
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
ROMs
LineageOS: https://download.lineageos.org/P024
AICP: https://saki-sss.blogspot.com.by/2016/12/z380k-aicp-121.html
Resurrection Remix: https://androidfilehost.com/?w=files&flid=121811
(made by https://androidfilehost.com/?w=profile&uid=457095661767100043, found from http://andmem.blogspot.jp/2016/05/asus-zenpad-8-z380kl-root-rom.html#chapter-19) - abandoned?
seities said:
I see that Lineage OS is supported on Z380KL. However, I found the wiki spec showing Snapdragon 410, but I found Z380KL in Asia with Snapdragon 615. Before I commit, I'd like to know if anyone knows whether LineageOS is fully compatible with Z380KL with Snapdragon 615 chipsets? Thanks.
Click to expand...
Click to collapse
probably not. I think it's only compatible with the SD 410.
xDark_ said:
Special thanks to @a350tv for helping me comb through 4PDA - this process would've been a lot slower or just wouldn't have happened if he hadn't offered to translate guides and download links to me. So most of the credit goes to him.
Flashing TWRP on 6.0.1 (Sept 1, 2016 patch):
1) grab your drivers (W10: boot into "no driver signature verification mode" to install the drivers needed for fastboot)
https://drive.google.com/open?id=1cGcoDCvmTxfXWNTG0iOXHw1WScmYBrKS
2) turn on debugging
3) type in "adb devices", verify that your computer sees your tablet (if you don't have ADB/Fastboot, get https://forum.xda-developers.com/showthread.php?t=2317790)
4) type in "adb reboot bootloader"
5) you'll see three options: 1. Enter SD DL mode, 2. Factory Reset, 3. Exit update mode
6) type in "fastboot devices", verify that your computer sees your tablet
7) grab your TWRP file (http://vasy.ru/TWRP/P024/) and type in "fastboot flash recovery [replace w/ location of the TWRP file].img"
8) once it says "finished", click factory reset mode (use volume buttons to navigate, power button to enter)
9) it should reboot into TWRP, slide to allow modifications
10) Boom, TWRP is installed.
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
IF YOU WANT TO KEEP TWRP BUT DON'T WANT Magisk:
1) After first boot into TWRP, turn off tablet.
2) Then turn on and hold Volume Up + Power. That will boot you into Bootloader Mode.
3) Go into factory reset and it should boot you into TWRP.
Now, it's safe to boot into the OS.
(TL;DR: Boot into TWRP twice before booting into the OS or else stock recovery will overwrite TWRP.)
Flashing LineageOS:
1) DL LOS from https://download.lineageos.org/P024
2) DL GApps from http://opengapps.org/ (choose 7.1)
3) boot into TWRP
4) go into Wipe, slide to wipe
5) go to Install, click on LOS file > add to queue, click on Open GApps file > add to queue, flash
6) wait til it's done, click "reboot"
7) wait a while (took mine 3 or so minutes to boot)
8) enjoy!
My GDrive folder with all files needed (except ROM and GApps)
https://drive.google.com/open?id=0BzJ-WWaQYXttTkttdHNELVBEc2M
To do:
Use this tutorial to backup all my partitions, just in case I get bricked yet again.
https://forum.xda-developers.com/showthread.php?t=2450045
Links to unbrick device via Asus FlashTool
Links to service ROMs (for use with AFT)
Add original links from 4PDA
Click to expand...
Click to collapse
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
jutphaas said:
Thanks for the tutorial, I had already dared to flash twrp recovery before you wrote this tutorial...
I believe my bootloader is still locked. And I could not reproduce/ write exactly what I did. But, in my case, just for information, when I want to go back into twrp, I can boot into bootloader (power volume up) and then option 2 reset the device gives me the twrp... I am not sure if that is how you get it, but for me, I still had twrp.
I think i will install magisk after reading your post.
Click to expand...
Click to collapse
I don't think unlocking the BL is necessary for flashing LOS. But yes, that's how I get into TWRP as well.
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
Can you still access fastboot, then at least you can flash twrp as described before in this thread and install from twrp lineageos p024 (lineage-14.1-20180105-nightly-P024-signed.zip) and Open gapps to get google playstore etc , select Arm, (not 64) then version 7.1, then Pico would work.
If you have twrp, you at least can still use your asus... I have found no way to flash original stock... stock must not be flashed from twrp.
Since you mention twrp already used, you can try: turn your device off, then press volume up then the bootloader menu comes, select 2: reset to enter twrp(where it says reset. if you had flashed twrp, that is how you can get into twrp) from there, install lineage os and gapps from micro sd card
My rom is MMB29M.WW_P024-V5.9.4-20170613
xDark_ said:
OPTIONAL, BUT HELPS TO KEEP TWRP INSTALLED: Flash Magisk.
That way, stock recovery won't overwrite TWRP when you reboot.
Click to expand...
Click to collapse
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
jutphaas said:
I assume this is on stock rom ? What version of magisk would work? I found I can be back at stock with my twrp backup so ..
But magisk 15.3 zip failed to install on stock-
I also used supersu v82 working on stock, or lineageos.
Would you know what magisk works on lineageos?
I like the exsd extension of magisk so I would like to try it on this device, either stock or lineageos
Click to expand...
Click to collapse
Yes it was. I flashed 15.2 on both stock and LOS. I've heard of some issues with 15.x so you can try .2 or 14.x.
pucci2 said:
Hello I'm new in the forum and I write from Italy, yesterday unfortunately I had the brilliant idea to downgrade my Asus z380kl through ADB, Fastboot and TWRP from pc so far so good, I go to flash the new rom and gives me error, I try to restore the backup here too error result? Tablet locked the only way to make it recognize to the PC is with ASUS FLASH TOOL ROM problem in format.raw unobtainable not even on the Russian site. Any good soul has the possibility to let me download it? Thanks, Sorry English but it is a translation of the very useful Google translate.
Click to expand...
Click to collapse
What error was given? What do you see when you connect it to a computer? What does "tablet locked" mean? Would help if you gave some pictures too.
I'm currently in the process of getting the RAW files/service ROMs for AFT but I don't have an ETA on when I'll be able to get that.
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
pucci2 said:
No on the tablet I have not installed TWRP and no other recovery.When I go into the original recovery of the tablet there is always the screen with the lock closed at the bottom right and there is no way to show it to the PC even with adb sideload, l 'only program that recognizes me the tablet is Asus flash tool, however, as I have already written the damn ROM in RAW format is untraceable.
Click to expand...
Click to collapse
Does it respons to adb devices of fastboot devices in this stage?
no, it is not recognized
I have bricked my realme x2 (rmx1991) and trying to flash it. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
hridoy501 said:
I have bricked my realme x2 (rmx1991) and trying to flash the .img. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
Click to expand...
Click to collapse
Download the stock recovery from this guide extract it and flash it while your phone is on fastboot.
Before you flash stock ROM, you need to have the rom zip file either in phone storage or the sd card. You can use adb push commands to transfer the rom file to phone storage folder. ROM OTA can be downloaded from the realme official website.
Once you have the file, just select install from phone storage / install from sd card and it will flash the stock rom.
This is how I recovered my phone when it was bricked.
My device is bricked, cannot boot into flastboot or recovery. so need flash tool flashing method
hridoy501 said:
My device is bricked, cannot boot into flastboot or recovery. so need flash tool flashing method
Click to expand...
Click to collapse
You bricked the boot so lusten to me clearly u are gonna to flash your phone online with servets its costs you 15 dollars i cany put the website because the xda admin warned me before to put link so u gonna to download the full tom not ozip file the rom file has tool needs password so there is some websites buying the password so u can write me in private cuz i cant put any link
Hey
hridoy501 said:
I have bricked my realme x2 (rmx1991) and trying to flash it. But the flashing tools are not working (msm tool needs username and password), (download tool shows "oppo unauthorized and cannot download"). So please give us a complete flashing guide with required rom and flash tool which is working/activated. Please.
Click to expand...
Click to collapse
I did the same and now same thing happend.
Can you fix your device?
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Your browser is not able to display this video.
I have the same problème did u solve it ?
with me we are in 3, please share if you find something !
you reached a solution so wished and few seconds later you get into nightmare back again !
Same here, but on redmi 9. I guess i made a mistake thaough, i tried to install EU rom and then this happened. Did you make this mistake too?
after otg update of miui 13 it happens. maybe @VD171 help us ?
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Me too
We need to send a message to Xiaomi support and let them know about this issue so that they can provide a solution for this problem in the future. They are the producer of this phone and can provide a remote tool for nvram repair
Redmi note 9 merlin will receive the MIUI 14 update and still supported by Xiaomi
Found a good solution I sold it to a repair shop for parts and got an iPhone already updated that iPhone and guess what IMEI is still there .
Recovered by simple way first install Engineering rom after that downgrade to 12.5
devjmi said:
Recuperado de manera simple primero instalar la ROM de ingeniería después de esa degradación a 12.5
Click to expand...
Click to collapse
Have you tried this method?
I already put it to the test to see if it revived my redmi note 9 but apparently it continues the same without any result, what's more, it is not capable of flashing the engineering ROM either.
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Yes I did, you can try searching how to flash engineering rom on dead phone on youtube
Good news people, I found how to revive our bricks with nv data corrupted, it is a simple solution, but that is if our device is going to be left without IMEI, or baseband, but it will turn on and work again, staying with MIUI 11 as a system, in the next comment I will leave the step by step and from now on I will continue investigating how to restore the IMEI and the base band of the equipment.
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Helo, what's the pass for the file? Thank's
Password plz
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Pass- HALAB_HT_TECH
I have 3 Solutions for this problem :
1) - After flash firmware to latest MIUI with official file, use Unlocktool [https://unlocktool.net/] to flash the firmware and restore nvram data (if already backup the NVRAM config)
VIDEO :
- IF NOT use Pandora tool [https://z3x-team.com/products/pandora/] (for repair imei (if didn't have nvram data *but need to search for new IMEI)
VIDEO :
- THIS IS FREE VERSION FOR REPAIR IMEI
VIDEO :
2) (if still bootloop or stuck) Remove plate
video :
OR
3) This is the last options, need to disassemble the device, and replace the capacitor next to CPU
VIDEO :
i hope that help
HackerSecMY said:
i hope that help
Click to expand...
Click to collapse
thanks man, but I have a question, the unlock tool is paid. Second, if I do and fix that, can I go back to MIUI 13?
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Thank you so much! I've spent months trying to find a solution and this one was the only one that worked
I've still got the IMEI issue, but at least it works now.
I'm stuck on 'Wiping, please wait' on a OnePlus Nord N100 Model BE2013
* Phone will not boot into recovery, goes straight to 'Wiping, please wait'
* Both partitions are toast
* Best TWRP I could find was 'recovery-3.7.0-11-08012023.img' but it started having problems mounting, might not be decrypting properly. (I was getting out-of-space errors. TWRP wasn't able to mount partitions to fix the errors.)
* TWRP's ADB and Fastboot, and prompt doesn't seem to decrypt phone's partitions properly. Keep getting write permission / out-of-space errors when trying to debug, re-flash ROMs.
* All I have left is the phone's native Fastboot.
What would you do to recover?
How can i wipe / repartition the storage so TWRP can mount it?
Flash all partitions manually (or use a script like me). Or MSM tool in EDL mode.
thomaskmaagaard said:
Flash all partitions manually (or use a script like me). Or MSM tool in EDL mode.
Click to expand...
Click to collapse
Thanks for the advice.. I used MSM in EDL today and all is good again.
tonydiepyyz said:
Thanks for the advice.. I used MSM in EDL today and all is good again.
Click to expand...
Click to collapse
Would you please share tool and firmware ? I have a similar problem
wlb01 said:
Would you please share tool and firmware ? I have a similar problem
Click to expand...
Click to collapse
Download MSM Download Tool: Unbrick any OnePlus Device [Video]
From this guide, you could download the MSM Download Tool for every OnePlus device and then use it to unbrick your OnePlus device.
www.droidwin.com
I somehow managed to oem and boot-loader unlock the phone. But im confused on how to proceed from here, I've tried varies methods leading to dead ends and dead links.
I have Qfil and LG-UP up and running with drivers and i know how to enter edl, and fastboot mode.
The closest i think i came to completing the process was getting this error (not support for G710VM21b_04_0812) in LG-UP when trying to cross-flash, for which i have the magisk patched boot a and b, for which i could load into Qfil, but they only work for for this firmware version (G710VM21b_04_0812) which is verzion.
ive been at it for 2 days. So, in short if someone could give me detailed instructions and working download links on any working method to root the phone would be much appreciated.
thx
nevermind i figured it out
SnakeDoctor216 said:
nevermind i figured it out
Click to expand...
Click to collapse
I'm curious. How did you end up solving it?
joseph15two said:
I'm curious. How did you end up solving it?
Click to expand...
Click to collapse
LG G7 Thinq
I ended up cross flashing with (G710ULM11g_01_NAO_US_OP_1112) and following this video ---https://www.youtube.com/watch?v=OkdqgNZuQPk---
So for anybody with an LG G7 and boot-loader unlocked here is what i did
Supplies - 1 firmware - (G710ULM11g_01_NAO_US_OP_1112)
2 file - (prog_ufs_firehose_Sdm845_lge.elf)
3 app - Magisk
4 necassry drivers ( i just downloaded anything i could get my hands, not sure how i got it to work)
---i download all these files from multiple forums i could find with active links---
Steps 1. cross flashed with (G710ULM11g_01_NAO_US_OP_1112)
2. Downloaded Magisk to the phone using the phone
3. Boot in EDL mode
4. Open Qfil / set to flat build / storage type ufs *bottom right corner*/ then select this program for programmer path (prog_ufs_firehose_Sdm845_lge.elf)
- Select tools / then partition manager / ok / find boot_a and right click to select manage partition data / then select read data / wait for it to finish and save in edl mode and close it down
5. Find the Qfil folder in Appdata / Roaming / qualcomm *type %appdata% in the Run search if you have trouble finding it* / select whatever Comport folder your phone is in *example "COMPORT 7"* / rename the find called ReadData_ufs etc.............. to "boot_a.img" / Take phone out of edl and restart it normally and plug into cpu / then copy and past that boot_a.img file you just renamed into the download folder of the phone
6. Unplug phone open magisk app / get it up and running / installation method / select the boot_a.img you just copied over to the download folder / check the preserve force encryption box / after finished close app
7. put phone in EDL mode and plug up / Open Qfil / set to flat build / storage type ufs *bottom right corner*/ then select this program for programmer path (prog_ufs_firehose_Sdm845_lge.elf) Select tools / then partition manager / ok / find boot_a and right click to select manage partition data / then select ****LOAD IMAGE**** data / wait for it to finish and save in edl mode and close it down
Notes
1. Unfortunately I'm not a tech savvy person so if anyone has trouble following this please refer to someone smarter
2. I'm not responsible for bricked phones, follow at your own risk.
3. But mine is working and i did all this just so i could have the abilty to change my MAC address so i could use this phone as a media/mp3 device
4. all the forums i used were from google searched XDA's
5. Here are videos i used as references to boot-loader unlock it ---https://www.youtube.com/watch?v=OkdqgNZuQPk---
---https://www.youtube.com/watch?v=Xa8jZYhVVJY---
GOOD LUCK