All the OTG adapters I've seen seem to be USB 2.0. Is it worth buying usb 3.0 thumb drives to extend the internal memory? does the 4k Max firestick support usb 3 drives over its the micro usb port?
I tried following the OS v6 method of adding a external USB 3.0 (Intergral 512GB) device using 50/50 and a AUVIPAL OTG adapter
Looked like it worked successfully to me.
I've moved SmartTube and Kodi to the exeternal storage, but I found the apps to be very very sluggish.
However, I factory reset the Fire Stick and then plugged in the USB and followed the prompt on screen to use it as external drive, it formatted the drive and recognised it.
I installed Kodi and SmartTube and they run fine.
I've noticed that apps that have USB support take a bit of time to install (as they're installed on USB) but once they are installed, they generally seem to work fine.
So, to answer your question, I think the speed is limited to USB 2 even if you use a USB 3 drive
Related
Hello, i have bought a OTG adaptor but when i connect a USB pen to my Sony Xperia S it doesn't do anything.
I have also tested:
- USB pen FAT32
- USB pen NTFS
I know that this adaptor is working because the store owner tested it on a tablet and it worked.
Stange thing is that i tried to connect to a zte blade, Galaxy Gios and nexus 7 and it didn't work as well....
However when i connect it to the computer the adaptor works...
Stock .55
No root
Can someone advise me?
Thanks
Root your phone and download USB OTG Helper from the Play Store.
SxperiaS said:
Hello, i have bought a OTG adaptor but when i connect a USB pen to my Sony Xperia S it doesn't do anything.
Click to expand...
Click to collapse
I have many FAT32 USB flash drives that work fine with my XPERIA S no problems.
I have not confirmed this myself, but it is possible the amps provided by the Sony XPERIA S(LT26i) could be as low as 100mA.[citation needed]
Can't find any documented specs for XPERIA S and USB power supplied and/or USB flash drive which also has a known documented amp draw for reference.
I'd really quite like to know what amps the XPERIA S USB port provides.
I have a USB thumb drive that doesn't work on my XPERIA S namely the HP v165w 8GB (FAT32 formatted)
It just comes up with a big red warning triangle saying, "USB Power Consumption error"
However the USB thumb drive HP c330w 8GB does work (NTFS formatted)
Many other SanDIsk FAT32 formatted USB thumb drives also work fine. Namely the SanDisk USB 2.0 Cruzer Facet 32GB
I have downloaded Paragon exFAT, NTFS & HFS+ which allows me to successfully mount NTFS formatted flash drives on my root'd XPERIA S.
My 'Desktop' FV-1 Android box with three USB ports/HDMI etc, mounts anything and everything, including the HP v165w 8GB USB thumb drive. So it just means no two Android devices are equal in design and power.
it should work anyway? I've seen a few shots and youtube movies where the USB on-the-go was working on an XS!
SxperiaS said:
Hello, i have bought a OTG adaptor but when i connect a USB pen to my Sony Xperia S it doesn't do anything.
I have also tested:
- USB pen FAT32
- USB pen NTFS
I know that this adaptor is working because the store owner tested it on a tablet and it worked.
Stange thing is that i tried to connect to a zte blade, Galaxy Gios and nexus 7 and it didn't work as well....
However when i connect it to the computer the adaptor works...
Stock .55
No root
Can someone advise me?
Thanks
Click to expand...
Click to collapse
连接U盘需要安装一个USB存储管理器的软件(此软件需要root权限和busybox).插入OTG和优盘之后可以看到优盘的灯亮了.之后再点击连接.
这样就可以在SDcard\usbStorage 里看到优盘里的文件.
你也可以连接一个集线器.这样可以连接鼠标键盘之类的.如果你要连接功耗比较大的设备,这样就需要一个带电源的集线器.如果动手能力比较强的话,还可以直接在OTG线上剥开接上电源.
希望有懂中文的....!!!!Hope someone will Chinese!!!
Connecting U disk need to install a USB storage management software (the software requires root permissions and busybox). Insert OTG and USB flash drive's lights. Then click connect.
The USB file so that you can in SDcard \ usbStorage see.
You can also connect a hub so you can connect a mouse and keyboard like if you want to connect to a large power equipment, so that you need a powered hub. Strong practical ability, but also can directly plug in the power in OTG online peel.
this is what google translates for me! pretty weird to read like this. but maybe we can figure it out?!
SNYXPR said:
it should work anyway? I've seen a few shots and youtube movies where the USB on-the-go was working on an XS!
Click to expand...
Click to collapse
In my honest option, I agree with SNYXPR, there should be no requirement for additional software on a standard build XPERIA S(LT26i) when using "supported" FAT32 formatted USB storage.
If the FAT32 formatted USB flash drive you have attached to the XPERIA S meets the power requirements you should be fine.
No software I know of is going to boost the power supplied by the MicroUSB port and at best, any application for USB storage is only able to support additional drive formats like NTFS etc.
I've had/have USB flash drives, Logitech Unifying Mouse/Keyboard attached without problems.
I've got a Galaxy Note Connection kit Model: DR03-S2 and that works fine and I'm able to read/write SD cards, MicroSD cards and USB flash drives using it without problems(one attached device in use at any one time).
If you go to the next step and use a powered USB hub, then a wider array of devices can be used with the XPERIA S as the USB hub is providing the power to connect the device. This includes USB printers and FAT32 formatted USB 80GB plus HDD (both IDE and SATA) etc. Also all those FAT32 formatted storage devices that said the XPERIA S did not meet the power requirement work too.
Remember the XPERIA S only support FAT32 formatted storage by default(natively).
As part of my desktop setup I have the following connection.
Sony DK10 dock plugged into a Aten USB switch which is connected to a powered USB Targus 7 port Hub.
This gives me access to USB mouse/keyboard, USB flash drives or USB HDD of any size, printer, SD card reader on my DELL U2410 monitor and etc.
Then it's just a button press to (USB)switch back to my Notebook, Desktop PC and any other device connected as part of my desktop environment.
Thank you for the replies, i think root is not required since i have seen a vídeo made by XperiaBlog that just connects a USB pen drive to Xperia S and it just works. I have tried a Kignston 8 GB and it doesn't connect, not event to nexus 7 ...
Hi All
I have just been buying loads of accessories such as HDMI connectors and OTG cables for my Note 2. But have had no success with any of them. I got the HDMI cadapter first. But get no picture at all. This could be down to several things. I only have a PC monitor to try this out on and it doesnt have HDMI input. I do have a HDMI to DVI cable that I know works but still no joy connecting my Note 2 that way.
Next the OTG adapter arrived and I tried to connect a USB stick but with no joy. I have ES file explorer as well as Solid Explorer. I understand the way the mount points work ie navigating to /mnt and trying all the USB links but none access my USB stick. The stick is formatted fat32. I also tried Stickmount And USB mass Storage watcher. I tried several USB sticks. I even tried to connect a mouse. No joy with any of it.
Normal connectivity using the charge/data cable is fine.
Am I missing something? Is there a setting I need to enable/disable? All the videos I've watched show this as being really straight forward.
Also I have a Touchwiz based Rom, CleanRom and the pjhne is the N7105
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
You'll need to buy a USB HUB (Get a powered one to future proof all your USB needs, you can get a USB 2.0 Hub pretty cheap). This will allow you to hook up at least 3 USB's to the OUYA. The Micro USB won't work for things such as hard drives or HID devices.
In the future, please use the search function before posting as this has been talked about in many other posts.
Dropshots said:
I tried connecting a USB keyboard using an USB OTG cable, but I didn't get it to work. The other USB port is in use by my external harddrive.
Is there a possibility to make the keyboard work?
Can immagine more people want to add a second USB device to their OUYA...
Click to expand...
Click to collapse
I have a 4-port hub and it works fine connecting 1 storage and 3 other usb devices
I had this issue where only one harddrive could be used and If you have a harddrive with 2 partitions ouya wont mount it. Luckily I found an app called usbotghelper which does all the above I mentioned plus read and write and ext3 support. I wish it would get submitted to the ouya store so I could use the paid version that will mount on startup.
Just a quick question for anyone who already received their Fire TV (Mine will be here Wednesday hopefully)
I see that people have had success in getting everything from mice/keyboards/etc working with their Fire TV, but I'm curious if powered USB hubs and external USB drives work as well.
Ultimately I'd like to have something along the lines of a USB keyboard/mouse as well as an XB360 controller, as well as a USB slot that I can throw some media on if I have a friend over who doesn't want to set up their machine/share on my network and we can still watch something through either XBMC or Plex.
TooSlo said:
Just a quick question for anyone who already received their Fire TV (Mine will be here Wednesday hopefully)
I see that people have had success in getting everything from mice/keyboards/etc working with their Fire TV, but I'm curious if powered USB hubs and external USB drives work as well.
Ultimately I'd like to have something along the lines of a USB keyboard/mouse as well as an XB360 controller, as well as a USB slot that I can throw some media on if I have a friend over who doesn't want to set up their machine/share on my network and we can still watch something through either XBMC or Plex.
Click to expand...
Click to collapse
I was able to plug in a USB 3 hub, unpowered, and used a keyboard and mouse at the same time.
rooobbbbb said:
I was able to plug in a USB 3 hub, unpowered, and used a keyboard and mouse at the same time.
Click to expand...
Click to collapse
With a non powered usb hub I was able to hook up a mouse,keyboard,wired 360 controller. Hopefully that answers your question
What about USB storage? Can you guys read movies files from a flash drive or USB hard drive?
-Sent from my TMO Samsung Galaxy Note 3 using Tapatalk
no drive support yet, hoping someone can figure out how to enable it
movie
Hi
Can we watch some avi mkv mpeg movie on firetv directy on usb key?
saerdryl2 said:
Hi
Can we watch some avi mkv mpeg movie on firetv directy on usb key?
Click to expand...
Click to collapse
saerdryl2,
Please take the minimal amount of time to read the responses from others as this has been answered... Most recently right above your post:
screwyluie said:
no drive support yet, hoping someone can figure out how to enable it
Click to expand...
Click to collapse
Ordered an Ouya that hasn't arrived yet and considering return/refuse.
Does anyone have any information for the future of FTV USB storage?
ie:
Is it not possible with the current hardware?
Is it a feature that is under development and will likely be enabled in the near future?
i8nt said:
Ordered an Ouya that hasn't arrived yet and considering return/refuse.
Does anyone have any information for the future of FTV USB storage?
ie:
Is it not possible with the current hardware?
Is it a feature that is under development and will likely be enabled in the near future?
Click to expand...
Click to collapse
Most likely not a hardware issue, but the software distributed with the device by Amazon does not support it. I think they want you to use their cloud services instead.
Most likely fixable once Root is available, but currently there is no distributed Root available yet. Most likely will see Root available after the device gets 4.43 updates.
Thanks, the hdd is a must have for Mashup's direct download, instead of using a dvr.
Since I got the Ouya on the cheap, will probably keep it for now.
I see the xbmc wiki says usb storage can be enabled with root.
Sent from my GT-I9300 using Tapatalk
Confirmed it's working. Just root + sideload StickMount.
Sent from my GT-I9300 using Tapatalk
nadimsoze said:
Confirmed it's working. Just root + sideload StickMount.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
So, just to confirm, you are using a USB Hub to get all three USB items? Keyboard/mouse, controller AND external storage?
need to get that last part clear..
Nope. Didn't try that. Just the 2.5" usb 500gb external.
Sent from my GT-I9300 using Tapatalk
Vylle said:
So, just to confirm, you are using a USB Hub to get all three USB items? Keyboard/mouse, controller AND external storage?
need to get that last part clear..
Click to expand...
Click to collapse
I have a simple 4 port unpowered USB 2.0 hub connected to my Fire TV at all times. In that hub is a 64GB NTFS thumb drive at all times that is mounted via StickMount on boot. When I need to, I plug a USB mouse and keyboard into two of the 3 open USB ports on the hub. Everything works with all 3 devices plugged into the hub. I hope that's the info you're looking for.
fireTVnews.com said:
I have a simple 4 port unpowered USB 2.0 hub connected to my Fire TV at all times. In that hub is a 64GB NTFS thumb drive at all times that is mounted via StickMount on boot. When I need to, I plug a USB mouse and keyboard into two of the 3 open USB ports on the hub. Everything works with all 3 devices plugged into the hub. I hope that's the info you're looking for.
Click to expand...
Click to collapse
thanks - this is all i need to know
now to go off to amazon n get one
Which usb hub are you using? I'd like to order one from Amazon, along with a 128GB stick.
fireTVnews.com said:
I have a simple 4 port unpowered USB 2.0 hub connected to my Fire TV at all times. In that hub is a 64GB NTFS thumb drive at all times that is mounted via StickMount on boot. When I need to, I plug a USB mouse and keyboard into two of the 3 open USB ports on the hub. Everything works with all 3 devices plugged into the hub. I hope that's the info you're looking for.
Click to expand...
Click to collapse
I don't know if that's disk related, but I have an old LaCia external 2.5" 500Gb HDD. It has a regular USB2 port and an additional 5V in which can be used optionally (if attached to the computer, it works with just the USB).
With the AFTV, I had to use the additional 5V.
A friend of mine is having the same issue with his external HDD, the power from AFTV is not enough
Hi,
I read that Fire TV doesn't support USB storage, but I believe it does although I've not been able to access a drive (plugged in to powered hub) yet. So far using sideloaded es file explorer I can see the USB device and alongside it the drop down button which when clicked seems to unmount the drive. Looking in the dmesg log (familiar to Linux users I'm sure) the kernel loads appropriate USB driver module and the recognises the USB storage the device as /dev/sda with partition sda1. There is also an entry in the list of mount points for /storage/usb, but it seems to point to 'tmp, tmp' which doesn't make much sense to me. It seems to me the only thing missing is automount of the recognised partition, does anyone agree or disagree? Does anyone know a way of mounting on an uprooted device (l'm on the latest update and would prefer not rooting unless unavoidable).
I've been using this one without issue: http://goo.gl/yXFV9o
Somehow I have managed to block my USB C hub, Generic C based UBS hub (3 x USB3 ports, Micro + SD Slot, USB C power passthrough and HDMI)
I've had it almost a week, it worked out the box and I never had to install anything to make life easier for it or me. This morning I was on a commision and needed to check out some of the Drone footage I had gotten, like usual I plugged in the Hub with the Drone SD already installed and was prompted by my ExFAT/NTFS reader app (Microsoft exFAT/NTFS for USB by Paragon) If I wanted to read the Drive, I selected no....That was the last time the hub worked on the Tablet. I cleared defaults, Cache and uninstalled both the Reader app and Total Commander (with restarts in between) with no joy.
Am I missing something? I tested the Hub on several more USB C devices and they all see it fine, it's just the Tablet that is no longer showing it connected. other Hubs works fine when using a UBS to C adaptor.
Any Ideas? Tablet is completely stock, locked bootloader and running 8.1.0.
UnreasonableTank said:
Somehow I have managed to block my USB C hub, Generic C based UBS hub (3 x USB3 ports, Micro + SD Slot, USB C power passthrough and HDMI)
I've had it almost a week, it worked out the box and I never had to install anything to make life easier for it or me. This morning I was on a commision and needed to check out some of the Drone footage I had gotten, like usual I plugged in the Hub with the Drone SD already installed and was prompted by my ExFAT/NTFS reader app (Microsoft exFAT/NTFS for USB by Paragon) If I wanted to read the Drive, I selected no....That was the last time the hub worked on the Tablet. I cleared defaults, Cache and uninstalled both the Reader app and Total Commander (with restarts in between) with no joy.
Am I missing something? I tested the Hub on several more USB C devices and they all see it fine, it's just the Tablet that is no longer showing it connected. other Hubs works fine when using a UBS to C adaptor.
Any Ideas? Tablet is completely stock, locked bootloader and running 8.1.0.
Click to expand...
Click to collapse
Ok, so I realise my First post was a little Puzzling. I've just returned from another big commision and now have time to look into this thing. Funny enough it works while connected to external power via the passthrough. So I've come to the conclusion the Tablet is not providing it with Power, I've checked under settings and have the usual under USB behaviour, how do I find the settings for providing power to a connected USB C device?