Develop Bugs

ROM UPDATED May 19, 2015 [ROM] LP 5.1 Resurection-Remix Hardened Unofficial

Rom updated on May 19. This is LP 5.1 release 2. Latest Google/CM/Resurrection sources + all hardened features. Plus cleaned IP addresses (got rid of Google, Level 3 communication, AT&T, Orange, Department of Defense and other shady ips). Also enabled is Volte (enhanced LTE), which is Voice over LTE. This depends on the service provided by your carrier. In the States, for example, T-Mobile provides such services, which include high definition voice. Usually, you need special update done by the manufacturer in conjunction with your carrier. This rom does not need that. Your Z1 is already provisioned for Volte. You will see in Mobile Settings another entry: Enhanced 4g LTE Mode. ALso, in test menu/phone (*#*#4636#*#*), you will see a Volte Provisioned Flag. So, as soon as your carrier starts Volte, you are all set.
Sources are the same...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12531
_____________________________________________________________________________________
Rom updated to latest sources on May 4. In addition to regular hardened features, more than 40 instances of Google IP, Level 3 Communication and Department of Defense IPs removed from sources both for IPV4 and IPV6. The same is replaced with Opendns IP. Keep in mind that those ips go not only in configuration files, but libs also and the latter cannot be decompiled and fixed...
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=12289
______________________________________________________________________________________
Rom Updated to LP 5.1.1. All hardened/security features implemented. Kernel used from Slimroms 5.1.
TWRP 2.8.6 is integrated in kernel.
Obviously, this is an alpha version...
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=12110
Kernel Source: https://github.com/AOSP-Argon/kernel_sony_msm8974/tree/lp5.1
___________________________________________________________________________________________________
Rom updated to 5.1: all hardened features enabled.
Download link: http://forum.xda-developers.com/devdb/project/dl/?id=11901
___________________________________________________________________________________________________
March 31: kernel updated to include screen color calibration:
See Download link: http://forum.xda-developers.com/showpost.php?p=59801528&postcount=94
_________________________________________________________________________________________________
March 27: New build is up, latest CM and Resurect changes; kernel includes voltage table, syncookie and TWRP.
Download Link: http://d-h.st/lw2s
Mirror Link: http://forum.xda-developers.com/devdb/project/dl/?id=11744
_________________________________________________________________________________
March 15: New build is up including latest sources, TWRP integrated in kernel, led lights fixed
DOWNLOAD LINK: http://d-h.st/UO7W
_______________________________________________________________________________________________
Marchh 7: Rom Updated to the latest version + plus all security enhancements. Sources for security changes are the same as posted
See Download section for update
Here is Resurection Remixed Lollipop hardened and secure. Built from sources on February 24.
Changes:
First of all, as many know, encryption on lollipop slows down the device to almost unusable. I was able to resolve that. The culprit was Qualcom crypto module and drivers that collide with graphics. In this rom, when you encrypt your device, there is no noticeable slow down at all. Your master encryption key is no longer stored in crypto module (which rumor has it is backdoored anyway), but rather hashed and salted on the drive itself.
1. Modified kernel to disable creepy SElinux and enable Tomoyo security. Now you can safely use Xposed framework and some modules such as Xprivacy, Appsettings and ShowDialpad, as well as many others
2. Modified kernel to disable qualcom module and drivers
3. Disabled creepy qualcom random number generation and enabled all other methods
4. Enabled 256 bit AES drive encryption as opposed to Google's default 128 bit
5. Enabled all ciphers and hashes available in kernel and disabled by default (thanks Sony and Google)
6. Latest CM changes
7. Omniswitch (to be flashed separately after flashing the rom)
Maybe more
INSTALL:
1. Be on Kitkat, rooted with CWM or TWRP
2. Enter Recovery, wipe System, Data, Cache
3. Flash the rom
4. Flash Omniswitch
5. Reboot and enjoy
If you want to encrypt your device, you need to do 2 additional steps before or after encryption. Go to Developer Options and enable "Force GPU rendering" and "Disable HW overlays. Yes, you have to enable (not disable) "Disable HW overlays" option. The latter won't stick after reboot. So, manually transfer the attached init.d script to /system/etc/init.d and set permissions to at least 744. This way the option will be set at boot and you won't have any noticeable slowdown. In fact, I don't see any difference in speed between encrypted and non encrypted device.
CREDIT: Resurection-Remix Team, Cyanogenmod, AOSP and Omniroms
WARNING:
I am not responsible if your device explodes and kills everyone around. You are doing it on your own. Russians, who are definitely coming, won't help you either :laugh:
Download links
Rom: http://d-h.st/l1rB For Update see Download Section
Omniswitch: http://d-h.st/AbGH
Init.d script (in case you want to encrypt your data): http://d-h.st/QIiE
Sources: https://github.com/ResurrectionRemix
https://github.com/HonamiZ1/android_system_vold
https://github.com/HonamiZ1/kernel_sony_msm8974
XDA:DevDB Information
Resurection-Remixed Lollipop 5.1.1 Hardened, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, Cyanogenmod
Version Information
Status: Testing
Created 2015-02-25
Last Updated 2015-05-19

screenshots
Screenshots added

Kernel updated with CPU voltage table
Kernel updated to allow under/over volting. See attachment.
Instructions:
1. Unzip the file
2. Flash in fastboot: fastboot flash boot boot.img and fastboot reboot
Enjoy

Thanks for this ROM, are there any known bugs?

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
All CM bugs as of February 24. You can go on their site and see the list of changes...

optimumpro said:
All CM bugs as of February 24. You can go on their site and see the list of changes...
Click to expand...
Click to collapse
So just need to look at http://forum.xda-developers.com/xperia-z1/general/rom-official-cyanogenmod-12-nightlies-t3007118 is that right?
Sorry I have to confirm, there are multiple threads (Official/Development) for CM12.
This ROM will maintain root and recovery, right?
I'll flash and let you know if I find any other issues.

Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.

Kyrius said:
Tried it. Works great. Some strange problem with mms though. Could not load them even though data works perfectly. Battery life looks great. Didn't try calling so i can't say anything about the mic.
Click to expand...
Click to collapse
I use Textsecure as sms replacement. Microphone works great...

Very buggy
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE

darkdevu said:
you should definately fix this rom as i cannot start camera it fc. it restart itseft
NOT STABLE
Click to expand...
Click to collapse
1. Learn the rule about not posting bug reports without logcat
2. Camera works fine: verified
3. Always wipe System/Data/Cache before flashing
4. Are you sure you have Xperia Z1?
Cheers

his profile says Z3. lol

Any further reports on this ROM? Interesting to know how it performs and about stability

Deleted

wis3m0nkey said:
Thanks for this ROM, are there any known bugs?
Click to expand...
Click to collapse
Rom Updated to the latest version. See Download section in the OP.

and where is the link to the update?

shikimafia said:
and where is the link to the update?
Click to expand...
Click to collapse
It is in Download section:
http://forum.xda-developers.com/devdb/project/?id=8412#downloads

Screenshots added in post #2. Note that only this rom and SlimLP work with the latest Xpivacy module. Tried on Crdroid and others and there is bootloop as soon as you enable Xprivacy.

Has no one tried this rom as not reports or posts
tried flashing update from scratch and get play services fc on every gapps i used............i am guessing i may have to flash initial release and dirty flash this over it? excuse me if i may have got it wrong

shingers5 said:
Has no one tried this rom as not reports or posts
Click to expand...
Click to collapse
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...

optimumpro said:
Well. The first version had 69 downloads. The latest one had 20. Other than the bogus claim about camera foreclosing (by someone who has Xperia Z3) there were no reports of problems. I have been using this rom for about 10 days without any problems...
Click to expand...
Click to collapse
I'm having issues flashing the new version as getting play services errors.... Was gonna try dirty flash over previous versions

[ROM][Unofficial][8.1.0][deprecated] Lineage OS 15.1 for Xperia Z1 compact 29.12.18

This Thread is deprecated!
Please use https://forum.xda-developers.com/sony-xperia-z1-compact/development/rom-lineageos-15-1-xperia-z1-compact-t3884247/
We'll provide Lineage 15.1 builds there as well. They come in two different flavours:
pure LineageOS
Security hardened microG LineageOS
Functionality is completely the same as provived by the builds from this thread - they are build from the same sources. Only difference: The new builds are signed to guarantee a maximum of security.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Status
List template by AdrianDC
Code:
- Boot : Ok
- GApps : OpenGApps Micro recommended
- Partitions (Data, Cache) : Ext4 and F2FS supported
- Bluetooth : Ok
- WiFi : Ok
- WiFi Hotspot : Ok
- RIL - Phone - Data : Ok
- GPS : Ok
- Camera : Ok
- Camcorder : Ok
- Lights : Ok
- MicroSD : Ok
- Accelerometer : Ok
- Compass : Ok
- Gyroscope : Ok
- Touchscreen : Ok
- FM Radio : Ok
- ANT+ : Ok
- Vibrator : Ok
- Microphone : Ok
- Audio & music : Ok
- Bluetooth audio : Ok
- MHL: didn't test
- NFC : Ok
- Kernel : Ok
- Graphics : Ok
- 3D Rendering : Ok
- Clock : Ok
- Offline Charging : Ok
- USB : Ok
- USB OTG : Ok
- Encryption : Ok, but installing updates only works with adb sideload!
- SEPolicies : Enforcing
Download
https://androidfilehost.com/?w=files&flid=269301
latest version: https://www.androidfilehost.com/?fid=11410963190603873784
Click to expand...
Click to collapse
FAQ
What about device encryption?
Device encryption is working. You only have to keep in mind that you need a PC with adb to install systemupdates.
Flashing via recovery isn't working until now, because there isn't a recovery capable of decrypting Oreo /data partitions at the moment. But an easy "adb sideload" should do the job. Or installing from the external SD card.
Click to expand...
Click to collapse
What about reboot to recovery?
Reboot to recovery is only working with magisk installed. Investigating this...
Reboot to recovery is working as it should now (and of course also without magisk).
Click to expand...
Click to collapse
What about GPS?
GPS apps like GPS Status&Toolbox or SatStat don't get location fixes. Nevertheless navigating with Osmand or googleMaps should work. Positionfinding is also slow. Got better
Click to expand...
Click to collapse
I found a bug. What should I do?
We need your feedback for optimization. But your feedback is only useful in connection with logs --> see section Bugreports
Click to expand...
Click to collapse
What about root access?
Root isn't included per default (except root over adb, but it's off by default).
If you want to gain root access to your apps use one of these (depending on your taste/needs):
Official Lineage Add-on https://download.lineageos.org/extras use su (arm) 15.1 here and flash via TWRP
Magisk https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
Bugreports
You'll find information about logging here.
Please also note how you got the error or how it can be reproduced.
Click to expand...
Click to collapse
Sources
Kernel: https://github.com/AICP/kernel_sony_msm8974
Manifest: https://github.com/115ek/manifest
Click to expand...
Click to collapse
Credits
SpiritCroc: big thanks to him for maintaining the device trees and a lot of very useful hints
rcstar6696
SuperLamic
drakonizer
AdrianDC
munjeni: thanks for tips and tricks
nailyk: thanks for tips and tricks
All the other contributors on sony msm8974 platform
LineageOS team
Click to expand...
Click to collapse
XDA:DevDB Information
Lineage OS 15.1 for Xperia Z1 compact - amami, ROM for the Sony Xperia Z1 Compact
Contributors
115ek, SpiritCroc, drakonizer, rcstar6696, SuperLamic, AdrianDC, nailyk, LineageOS team
Source Code: https://github.com/115ek/manifest
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Beta Release Date: 2018-09-10
Created 2018-09-10
Last Updated 2019-03-18

Changelog
13.12.2018
fixed wrong bluetooth MAC address (00:00:00:00:5a:ad on all devices), now displaying correct device specific one
12.12.2018
synced LineageOS sources (security patch level December 05, 2018)
11.11.2018
fix problem with Lineage SU addon by using 64-bit binder API (thanks @NyQuilXT)
synced LineageOS sources (security patch level November 05, 2018)
14.10.2018
fixed GPS 3D fix
08.10.2018
fixed MHL (thanks @koron393)
added callrecording
synced LineageOS sources (security patch level October 05, 2018)
23.09.2018
fixed reboot to recovery without magisk
minor improvements from AICP devices trees (thanks @SpiritCroc)
synced LineageOS sources
10.09.2018
initial release

Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
Encryption : Ok but needs recovery capable of Oreo decryption for installing updates (AFAIK such a recovery doesn't exist until now for our device...)
Click to expand...
Click to collapse
I'm actually having some trouble finding a up-to-date recovery.

Jeroen1000 said:
Hi 115ek. Thanks for making this. I'm not new to flashing but I have a question nonetheless. What do you mean by
I'm actually having some trouble finding a up-to-date recovery.
Click to expand...
Click to collapse
You can use this https://androidfilehost.com/?fid=5862345805528046823 or that https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450.
For Lineage 15.x flashing you need TWRP>=3.2.x If the version is older you'll end up in a error 7.
Concerning decryption: Google introduced some new encryption stuff and so the decryption of /data from inside TWRP is broken. Some guys are working on it (@nailyk).
Encrypting the device should work fine, but I don't know what happens if you want to update the encrypted device. (I'm going to test that ).
Basically you need to store the update package outside of encrypted partitions... Maybe adb sideload works - but it's circumstantial.
Edit:
That's only interesting if you plan to encrypt your device. Otherways you can relax.
Edit2:
adb sideload should do the job. But you need a PC for updating. Installing an image directly via recovery isn't possible until now.

With sources for both kernel and system unlike the other port! Thanks, I'll definitely be using this!

Xperia J1 Compact
could this work on an Xperia J1 Compact?
it's basically the same phone with the same specs right?

The rom looks very stable and balance, but I've some problems with root procedure. I tried the lineage addon, the root seems active, but opening apps (es. Ad away) results unrooted, any ideas?
Update: Now Works. Flashed lastest Magisk

Amazing to see this old device on Oreo, just installed and it feels smooth and nice. Just a pity that I have broken the sim card connectors inside so I cant use it as a phone but I will fins use of it at home just for fun. Thank you for your work 115ek :good:

Great to see this rom realy! This rom have stock camera?

munjeni said:
Great to see this rom realy! This rom have stock camera?
Click to expand...
Click to collapse
What do you mean with stock camera?
There was a thing with kernel versions 3.4 and 3.10, wasn't it? We're using 3.4.
Concerning the camera: I'm not that expert, but it looks okay I would say.
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.

115ek said:
Feel free to contribute: There's still the reboot-to-recovery problem and Pie is in the starting blocks.
Click to expand...
Click to collapse
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery

raschad said:
my phone reboots to recovery.
Need to install Magisk
without it I also do not reboot to recovery
Click to expand...
Click to collapse
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome

115ek said:
Thanks, but I already knew this
But I like to reboot to recovery without magisk. I think there are people around who don't like/need magisk (including me).
The fact that it works with magisk may locate the problem to the boot.img. I have init_sony in mind and will check that.
Any ideas welcome
Click to expand...
Click to collapse
I meant does this rom have stock camera blobs? Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?

munjeni said:
Do you have property: ro.bootmode
and does /proc/cmdline shows diferent bootreason when you set reboot reason to recovery?
Click to expand...
Click to collapse
Good news: an easy import of your init_board_device.h did the trick. Maybe a timing problem?
Anyway: reboot to recovery is now working correctly, even without magisk
Is that okay for you: http://gerrit.aicp-rom.com/c/AICP/device_sony_msm8974-common/+/73688 ?

I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...

munjeni said:
I meant does this rom have stock camera blobs?
Click to expand...
Click to collapse
We're using them https://github.com/AICP/proprietary_vendor_sony/tree/o8.1/rhine-common/proprietary/vendor, so I guess yes.
You're more into topic, aren't you? How to distinguish between AOSP and stock blobs? There were some mysteries around DRM, camera quality and so on. I remember a separate thread you also participated in...
But I'm not really into this topic.

munjeni said:
I just found this https://github.com/LineageOS/androi...neage-15.1/init/init_sony/init_board_device.h its just prototype so seems you have missed init_sony/init_board_device.h in your device tree...
Click to expand...
Click to collapse
No, it's actually in here: https://github.com/AICP/device_sony_msm8974-common/blob/o8.1/include/init_sony/init_board_device.h
But It's different from yours. Yours performs another keycheck.

Seems rom have stock blobs. To distinguish between AOSP and stock blobs... depends on kernel you have using, aosp kernel can't be used with stock blobs since aosp camera kernel module is diferent, but I'm out of development for long, have no free time and to be honest I still didn't forgot treatment & injustice for my status on xda, that made me more inactive here. Recognised members have bad treatment here, seems senior members have much more priority than recognised members, and thats reason why everybody here need to care how many hours per day to waste here. I decided to stop wasting my time on xda since xda leaders do not respect anybody's hard work here. I recommend the same to everyone here.

I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem ?

ULT][MO said:
I tried "reboot to recovery", after Sony logo the phone reboot again (also if you press recovery button), and to enter in recovery you've to push again the button at the second reboot.
It is like a normal reboot... But it's not a problem
Click to expand...
Click to collapse
What recovery are you using? I recommend this one: https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/lineageos-12-1-z1c-current-sec-patches-t3614936.
With mine from here https://forum.xda-developers.com/sony-xperia-z1-compact/orig-development/recovery-twrp-3-2-1-t3759450 it still won't work. Maybe a timing thing.
But it's okay if we have at least one working TWRP.
And oreo /data decryption is still an issue we have to address.

[ROM][XZP][SINGLE/DUAL][90HZ][EAS] ZfSODP 🍋 - July

Code:
*** Disclamer
Please behave responsibly and avoid thermonuclear war. I am
not responsible for any bricked devices, etc.
Introduction
This is Zest Kernel. It's an optimized kernel for our device which includes a few nifty features. Built, on every security update, you'll have the best of the best. Features will be listed below and shared, to the most of my ability, across all my supported devices. This isn't just my kernel it's yours too - request any features you like and I'll try to add them in. However, I'm also busy with studies so please don't ask for dumb stuff.
Click to expand...
Click to collapse
Images
Possibly the fastest [clean] ROM for our device, benchmarks coming soon .
Click to expand...
Click to collapse
Features
Google's exclusive features for Pixel devices (except Music Ticker and Call Screening)
Lawnchair launcher
Spoofed stock device to pass SN
Widevine L3
Faster encryption device-wide
Daydream VR
Fast, optimised Zest Kernel
EAS
Markup screenshot editing
Google Sound Picker
Google Wallpapers
Digital Wellbeing
Optimised GPU rendering for Pie
Custom Clang and GCC toolchains for building - optimised LLVM with PGO, and GCC 9.1
OpenGApps pico included
GCam HDR+ support
Click to expand...
Click to collapse
Installation instructions
* Go download https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-yoshino.
* Unzip the download to get an .img file.
* Install fastboot (drivers for this can be gotten from Google directly), drivers for flashmode for Windows can be gotten from newflasher.
* Enter your command prompt or terminal whatever and fastboot flash oem THEFILEYOUEXTRACTED.img.
* Find a decent TWRP and flash it.
* Download the ROM for your device. They are all in this folder https://jenkins.cosmic-os.org/job/zfsodp-core/ws/lastbuild so click the one for your codename (eg. G8141 is single sim maple and G8142 is dual sim maple).
* Flash it in TWRP and wipe internal storage and format data (the option that has red text and makes you type yes).
* Enjoy!
Click to expand...
Click to collapse
Download
Latest is on my Jenkins job.
Click to expand...
Click to collapse
FAQ
PM me in XDA's Sony group.
Click to expand...
Click to collapse
Special Thanks To
Code:
* @kholk for his kernel advise
* @Sultanxda for his kernel advise
* @deletescape for Lawnchair
​
XDA:DevDB Information
Zest-flavoured SODP, ROM for the Sony Xperia XZ Premium
Contributors
LazerL0rd, The entire SODP team
Source Code: https://github.com/ZfSODP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Sony OSS OEM binaries
Based On: SODP
Version Information
Status: Beta
Beta Release Date: 2019-07-06
Created 2019-07-06
Last Updated 2019-08-10

Reserved

Reserved

nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.

I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0

del

Can I flash the kernel through twrp, then flash the zip?

Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom

Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Give it a week or so mate, lazerl0rd is studying/having exams for a while.

Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!

Any screenshot of the performance?

It was stopped at the android logo, it ran all night and did not enter the system. please help me!

still on logo android !/

Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.

Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.

Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.

Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.

i hope you add other version special 90hz because 120hz make my device overheats and thank you

Moarten said:
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too.
Laplacetor said:
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
Click to expand...
Click to collapse
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too. ROM isn't on my website and never was .
wolfmanstr said:
Can I flash the kernel through twrp, then flash the zip?
Click to expand...
Click to collapse
Don't use my stock kernel with this.
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
It performs better, battery is decent now (after a load of changes). We now (as of today) have a Power HAL (libperfmgr) which supports DT2W on supported devices too. I may or may not update it to version 1.3.

SilverGamer_YT said:
Any screenshot of the performance?
Click to expand...
Click to collapse
No, it's EAS and you could test it out.
tronganhha29 said:
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
CRNO said:
still on logo android !/
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now.
Sjll said:
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now. EAS seems stable, here. The bugs we have aren't really EAS related.
undefine said:
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least. I changed up the thermal driver so it should be good now. Btw those thermal modules in Magisk won't change a thing as I use sultan's thermal framework now - not RQBalance stuff. DPI has an option on setup under "vision", choose what you like. I added GCam instead, it's gonna be better quality than Sony's crappy cam app. Ancient app logos aren't gonna be updated, these are ASOP packages - instead I'm replacing them with Google packages. Also I made everything Squircle shaped too. Device-wide dark mode will be coming soon, needs some kanging [with original authorship] from Q. Phone application should be de-google-ified -> you can turn off the spam filter and install any Dialer you want. I'm not dealing with darkening AOSP's package so that's why I'm using Googles. Google can get your data if Play Services is installed anyways. Option to switch resolution and frame rate on the go -> idk why SODP removed that.
Astoras said:
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
Click to expand...
Click to collapse
For Android kernels, you can't just chuck a module in. But I'll add it to the kernel config for ya.
CRNO said:
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Click to expand...
Click to collapse
Already done. And - "I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least."

[SGSI][Pie][Semi-bugless]MIUI 11

Welcome to MIUI sGSI For Galaxy J7 2017
TESTED ON J730X​
Some information you should know..
This is a fully working MIUI sGSI with Android version 9.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
I don't own any files here, except patch files.
So, we are here with sGSI. It's normally called "unstable" and "not for daily usage" so users are recommended to go for GSI. But GSI lacks features and has AOSP-like design that some users may be bored of that. And now we finally break that law. sGSI can now be used as daily drivers.
As the nature of these sGSI go, it was a non stop battle for almost 3 weeks straight to get it to this point where all features are working as expected. if you appreacite this work Hit the Thanks button
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
FEATURES:
Based on MiuiMiX 11 by MMX Team 9.12.26 using ErfanTools
Android 9.0
MIUII 11 Features
Semi-SIM support (Currently one SIM only)
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full MIUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Kernel:
You can choose either latest CronosKernel by @ananjaser1211, or KRAKEN kernel by @SPARTANICUS
Install steps:
ensure you have LATEST TWRP from Here
Download all the files in the DOWNLOAD section
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash Project Spaget 3.0 (not X!) here and follow the steps there.
Flash MIUI-Aonly-9-20191230-ErfanGSI.img to SYSTEM
Flash your desired kernel, either Cronos or KRAKEN (must be using Treble version)
[IMPORTANT] Flash Magisk in order to have patch working
Flash sGSI-Patch.zip
Flash NFC Patch
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
Install Google Play Services apk in Downloads section in order to get setup working
Setup your rom and READ the F.A.Q for more information.
BUGS:
Signal bar doesn't work (always empty) but it's acturally working
FM Radio (No FM Radio app in image)
Only one SIM is working at the moment
VoLTE not working (need another fixes)
SCREENSHOTS:
Imgur
CREDITS:
IF you helped in this GSI and i forgot you, tell me in a PM or in a reply
@ananjaser1211 for his Project Spaget, CronosKernel and HUGE contribution for Exy7870
@SPARTANICUS for KRAKEN Kernel
@SrCDA for his NFC patch
@erfanoabdi for his tools to port GSIs
And the rest of EliteTeam
DOWNLOADS ARE IN POST 2

DOWNLOADS:
Official Treble support Group : Telegram
----------------------------------------------------------------
All files are uploaded here: Google Drive
GSI: Here (My Google Drive acted up and does not let me upload any more files)

FAQ:
Good idea to read this F.A.Q While the rom is installing
Notes:
Q : Brightness bar not working / Camera doesn't work
A : You have flashed Spaget X instead of Spaget 3.0. Reinstall again
Q : Phone doesn't detect any SIM cards
A : Flash latest Cronos/KRAKEN kernel
Q : Everything on my screen is so small [J730 only]
A : Go to Settings > Developer settings > Set screen density to 411
Q : I got front camera stretch
A : Change resolution from 16:9 to 4:3
Q : Can I use front flashlight?
A : No, Samsung has their own libs, for now no apps can use front flashlight. Back flashlight still works
Q : How is battery Life ?
A : With some tests and some cycles, it will be better than stock due to optimzations
Q : the phone wont install any apps
A : Reboot

One more

does the rom have some type of error for daily use

VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work

The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip

What android version is this? Can i flash the official magisk? There's no camera stretch bug? Like other gsi rom?

gabriel.oliveira.brito said:
The first boot is so longer? I've waiting more than 10 minutes and don't boot. Or is bootloop?
Click to expand...
Click to collapse
After the boot animation is on for 30~60 Seconds. Hold VolumeDown+power until the device reboots
gabriel.oliveira.brito said:
And i've not found the MIUI-Patch.zip, only sGSI-Patch.zip
Click to expand...
Click to collapse
Thanks for noticing, I forgot to rename the file.

NindoS said:
VoLTE : Not work, need flash Magisk Module and using Phone App to VoLTE work
Click to expand...
Click to collapse
I don't use VoLTE, so I couldn't test if it works. Can you tell me which Magisk module you used?
NindoS said:
All work normal, just a Android Pie but like Android Q MIUI :good:
Great work
Click to expand...
Click to collapse
Nice

Updated FAQ and sGSI patch. I forgot to add an important fix in patch, so anyone using this MIUI, reflash the new patch right now :good:

I tried again, followed all the steps as requested. On the first boot, I restarted the phone after approximately 30 seconds. But I still bootloop. I'm using Project Spaget 3.0, but I can't find a topic in the forum. Could you send me your Project Spaget zip file?
My logcat is on attachments

nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work

Working fine but having bug
I have a bug with the WhatsApp application when viewing the stories that contain videos are not played and the app freezes.
I attach my log Cat about the error

I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have

dani_hedz said:
I have problems with external storage, the system does recognize it but with third-party apps such as file explorer or streaming apps like spotify they don't detect external storage, I've tried to modify the vold.fstab and nothing. some fix they have
Click to expand...
Click to collapse
It's sGSI related problem, don't know why it happens

argenmu09 said:
nfc not working. I installed the fix on the twrp and it failed, I had to install the fix when I started the cell phone so that it did not give me an error and it appears as a module installed in magisk but it does not work
Click to expand...
Click to collapse
It works for me

Wi-Fi not working

[ROM][A515F/DS][OneUI 3.1 - S20 Port] Just4Fun v1

HELLo everyone...
After several weeks, months and before Android 12 released, i decided to share this ROM to this A51 community. Hopefully you guys enjoy it and don't offend me if the ROM is bad, so....let's get it ON.
Things to do before flashing:
1. Make sure you're on binary 5 (this ROM tested and using binary 5 vendor, so to avoid any broken or whatever error flash your device with latest firmware).
2. Backup your IMEI (highly recommended).
Flashing:
1. Clean flash is recommended. Flash kernel, flash J4F vendor and system.img, flash multy disabler (if necessary) then full wipe and also you can perform "typing YES" format. Reboot to recovery again, then flash as usual you guys always do (Magisk etc.).
ROM Features from S20 and Note 20 line up:
1. Samsung Dex (not full features coz need fix at kernel level).
2. Flagship live blur
3. Flagship edge lighting style
4. AirCommand (S pen)
5. LiveDrawing
6. Multy screen resolutions (HD+ - FHD+ - WQHD+)
7. 1000++ system fonts
8. Flagship sound quality and effects
9. Camera features unlocked (pro video etc.)
10. All original A51 features
11. Common tweaks here and there and so many possibility to unlock another S20 features
Bugs:
Minor glitch in pro mode video, and not really remember and deep testing everything, but hopefully still acceptable (hopefully ) but yeah..nothing's perfect, if you found one let's discuss together in A51 telegram group: https://t.me/samsunga51
Hall of Fame:
@MrWaehere for his awesome CRB kitchen
@VDavid003 and his rom TreeUI for my inspiration and countless help
@Yillié and his OFox recovery and also countless help and advise and ideas
@BlassGO and his Dynamic Installer, patches, advise and countless contributions (thanks for making AirCommand even greater lol)
@manudinath and his projects.
@Winb33 for fonts mod
@topjohnwu for Magisk
@ianmacd for multy disabler and TWRP
Stock Kernel Source
PM me if i forgot to mention someone.
Advise and Tips:
- It's normal during first boot if lags occurs, give the ROM some times to settle, finish your setup, update your apps and you good to go..
- It's better to avoid update in Galaxy store related to system app, such as MDE Service Framework, Samsung Core Services etc. It might causing conflict due to mixed up firmware. But anyway it's up to you.
- Please do not complain regarding app missing (getting debloated) and related to debloat. Because it's very hard to acomodate every person's taste. Bloatware is very Objective and absurd for each person and I know it's supposed to be using Aroma installer or any script but i don't have time that much to do that.
Download link:
**when you click this link and downloading, that's mean you're agree to all the consequences and i'm not responsible to anything - do with your own risk**
LINK

Pero peeps. Sorry for not being able to test all the stuff properly xD.

Yillié said:
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Click to expand...
Click to collapse
nah, you have doing so great/ thank you s much for everything.

Testing .

perro

Ole its already, nice

Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.

@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50

BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
Ia possible wirh This vendor run fingerprint perfectly in havoc

Badger50 said:
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
If run for You send details my friend

Someone knows how to pass CTSprofile in magisk with this rom?

gobblefunk said:
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
Click to expand...
Click to collapse
system and vendor.

BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
mhm...thanks for everything

jagpanzer said:
system and vendor.
Click to expand...
Click to collapse
Kernel 11 support this ROM?

Magisk 23.1
Download Magisk 706a4922 alpha apk
Download File Magisk 706a4922 alpha apk
apkadmin.com

Changelog magisk 23.1
DOWNLOAD VERSion ALPHA:
Magisk v23.1 (706a4922-alpha)
Changelog:
• Switch to zygisk to execute the deny list,
• Magiskhide has been completely removed
• Denylist Added
• Restart to take effect after changing the switch state of zygisk
• Major changes, some problems may occur, temporarily not pushed to the update channel
Others changes in APK:
[General] supports pure 64-bit devices
-[General] Support Android 12 emulator
-[Zygisk] code injection framework
-[General] Remove MagiskHide
-[General] Support simulator loading module
-[MagiskBoot] supports zImage format
-[MagiskBoot] Add zopfli encoder
-[MagiskInit] supports boot configuration
-[App] Repair installation function will now check whether the script under /data/adb/magisk/ is not updated
-[MagiskInit] supports some Meizu devices
-[MagiskSU] If supported by the kernel, use isolated devpts
-[MagiskSU] Fix pts configuration code, no additional sepolicy rules are now required
-[MagiskBoot] supports v4 boot image header format
-[MagiskInit] Support some OnePlus and Opal devices Oplus.fstab
-[App] The update module needs to be restarted, mark deletion is not allowed
-[App] Delete online warehouse
-[App] Add mount information to the saved log file
-[App] Adapt to Android 12 API level
-[App] Display running waiting pop-up window when hiding/resuming the application
-[Stub] Open source obfuscation function
-[Script] View and display the sepolicy rule folder of the module
-【App】Hide the screen overlay when you need to pop up the window. Android 12+
-[App] Delete the floating bottom bar and change it to a general bottom operation bar
-[General] Support compilation cache
-[General] Added rejection list function
-[App] Delete DoH
-[App] Delete SafetyNet

Can you please also make this rom for M30s ??
Because both have similar specs and same soc !

Bluetooth connect error

hacker812c said:
Kernel 11 support this ROM?
Click to expand...
Click to collapse
during testing i only test with BF2. you can try
Arya1999 said:
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Click to expand...
Click to collapse
sorry, no time.
Inomjon6940🇺🇿 said:
Bluetooth connect error
Click to expand...
Click to collapse
last time i try with old BT 4.0 earphone was fine and also BT call. will test again, on last build i've made changes and could be broke something