Develop Bugs

I can't enter in Fastboot, please help me !

Hello! I have an Xperia Arc ICS 4.0.3 (4.1.A.0.562), I want to unlock my bootloader, but I can't enter in Fastboot, I tried many times (switched phone off, I pressed & hold Menu button and then I connected the USB cable), but don't occur as seen in all tutorials. Turns Sony logo, and blue light flashes only once and the Sony logo remains same. Please help me, as you know almost all, if you have not unlocked bootloader can not really do anything.

you have to hold the right ''options'' button not the home butten
____________________
hit thanks if i helped you

LegendSmoker said:
you have to hold the right ''options'' button not the home butten
____________________
hit thanks if i helped you
Click to expand...
Click to collapse
I know that the menu button is the bottom right

maybe move out the battery wait 30 sec put the battery back in the phone and try then angain
sorry for bad english

Had similar problem once. If its the same, you dont have the drivers installed.
In my case the phone also didnt enter the fastboot mode, LED flashed blue once and the phone kept booting.
Try this thread http://forum.xda-developers.com/showthread.php?t=1582554
or look for fastboot drivers in the forum!
hope i could help!

Ya install fastboot drivers from Flashtool/drivers.
U will be fine.
Arcman™ [email protected] LT15i using Tapatalk 2

Antochrist said:
Had similar problem once. If its the same, you dont have the drivers installed.
In my case the phone also didnt enter the fastboot mode, LED flashed blue once and the phone kept booting.
Try this thread http://forum.xda-developers.com/showthread.php?t=1582554
or look for fastboot drivers in the forum!
hope i could help!
Click to expand...
Click to collapse
Thanks for this link, but I don't know how to install these drivers

dns.vlad said:
Thanks for this link, but I don't know how to install these drivers
Click to expand...
Click to collapse
Did you read the thread? its right here
Velcis Ribeiro said:
Pull up the Windows 8 Main Screen and type, System Configuration, or right-click at Computer. Go at Devices, found you Unrecognized device, right-click on it and Update... "" Than put manually installs... and select the folder.
Click to expand...
Click to collapse
Its the same on Win7 etc. Go to System Configuration -> Device Manager (not sure how its called in english) -> Look for your Arc -> right click -> Install drivers manualy -> show the destination of the fastboot driver folder. :fingers-crossed:
Well something like that... not sure since I'm on Linux.

[Q] Need Help :( :( Bricked SGW

:crying: Hi there, yesterday i tried to remove cwm from my galaxy gt-i8150 and i've referred to many solution they mentioned that do it same way as how i flashed cwm...but at last i failed, my SGW do turn up when i press the power button but it stuck at "Warning!! A custom OS can cause......." there have prompt to press volume up or down and a triangle exclamation mark at below (i dont know whether this is download mode or not)
When i pressed volume down button it reboot and then come back to this screen again, i've tried many times pressing volume down button and pull out & place back my battery, it still shown up this screen allover again. I viewed other unbricking solution thread but didn't found any situation same as mine. When i pressed volume up button nothing happen, i can't boot into recovery mode. please help ...:crying::crying::crying:

http://androidforums.com/galaxy-y-a...ne-using-odin-v1-85-also-fixes-bootloops.html
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.

patrickdass said:
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.
Click to expand...
Click to collapse
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?

will_wl said:
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?
Click to expand...
Click to collapse
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc

Ahmed.ragab said:
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc
Click to expand...
Click to collapse
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"

will_wl said:
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
Click to expand...
Click to collapse
did you pressed continue while you are in download mode ?

Ahmed.ragab said:
did you pressed continue while you are in download mode ?
Click to expand...
Click to collapse
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected

will_wl said:
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected
Click to expand...
Click to collapse
I will upload Samsung drive for you to try

Ahmed.ragab said:
I will upload Samsung drive for you to try
Click to expand...
Click to collapse
Thankyou dude. Appreciate your reply

will_wl said:
Thankyou dude. Appreciate your reply
Click to expand...
Click to collapse
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe

Ahmed.ragab said:
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe
Click to expand...
Click to collapse
Too bad it still not working Thanks anyway.
Currently using windows 8, i think this is windows vista package? Should use driver for windows 8?

i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:

will_wl said:
i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:
Click to expand...
Click to collapse
I think as it is able to go in download mode there is a hope .. don't worry will be fixed

Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile

Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.

Redwraith96 said:
Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.
Click to expand...
Click to collapse
when i click on the download link ads window pop-out and download does not go on, any idea?

miki2o said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile
Click to expand...
Click to collapse
Thankyou for trying to help
but seems like u don't get what is my problem now, when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"

will_wl said:
when i click on the download link ads window pop-out and download does not go on, any idea?
Click to expand...
Click to collapse
install the latest USB drivers from here:http://uploaded.net/file/xdloq4jw (after installing the adb driver!!)

Windows 8 has major problems with compatibility with Odin ......that is probably the issue here.......
Try a PC with an older OS (preferably XP but vista or 7 should work)
If you're using vista or 7, run Odin as administrator.
If XP, run normally.
Then......
Make sure....
1) kies is NOT running (kill in task manager)
2) any installed firewalls/anti virus are disabled
3) have a selection of USB cables on hand to try if one doesn't work.
4) the USB port you are using needs to be a primary port (connected directly to the PC motherboard)......but try them all anyway....
Good luck....
Sent from my GT-I9100 using xda app-developers app

Urgent - Boot and recovery problem!

Hi to all
I have a big problem. My HTC Desire HD is now "dead". So, everything is working normally, just fine, on JellyTime, but this afternoon everything get broken. Suddenly, after the boot animation is finished, nothing happens, the screen is "black". The phone works, because when I connect USB to the computer sound. I can not get into Recovery (Home + Volume Down), can not do anything. I tried to remove the battery, but it does not help. I tried with adb, but there is "error: device not found". So I installed the drivers, asking me activate USB Debugging on the phone, and I can not access the phone.
Do you have any idea how to access recovery mode and install the new ROM?
Please help!
Thanks in advance.

just turn on your device with press volume down + power to get into the bootloader..then from there you can select recovery

JJeamy said:
just turn on your device with press volume down + power to get into the bootloader..then from there you can select recovery
Click to expand...
Click to collapse
I try, but I can't. :crying:

SkipperRi said:
I try, but I can't. :crying:
Click to expand...
Click to collapse
can you explain more cleared about this..?, did you mean your volume rocker is already broken or what else..?
what is the last you know the state or your phone bootloader..?, unlocked with s-on or already s-off..?
and what about the stock RUU..did you had already tried to flashing it through the pc..?

JJeamy said:
can you explain more cleared about this..?, did you mean your volume rocker is already broken or what else..?
what is the last you know the state or your phone bootloader..?, unlocked with s-on or already s-off..?
and what about the stock RUU..did you had already tried to flashing it through the pc..?
Click to expand...
Click to collapse
I finally managed this problem. I pulled off the battery over the night, and this morning I can booted into the recovery. So, I installed new ROM, all my apps, and now I performed backup to the my PC.
Thanks for help!
Regards.

Again same problem. For few hours everything seems fine, but just now my HTC has "blank" screen... Nothing to do. Again, I can't go to Recovery, nothing... What's going on with this phone?!?!

JJeamy said:
can you explain more cleared about this..?, did you mean your volume rocker is already broken or what else..?
what is the last you know the state or your phone bootloader..?, unlocked with s-on or already s-off..?
and what about the stock RUU..did you had already tried to flashing it through the pc..?
Click to expand...
Click to collapse
How to do this? And, if I do that, will be my phone still rooted after that?

SkipperRi said:
How to do this? And, if I do that, will be my phone still rooted after that?
Click to expand...
Click to collapse
no..you will lost it
what the state of your phone bootloader..?
unlocked or locked or nothing ?
s-on or s-off ?
hboot - ???
n your phone still can't go to bootloader with press volume down + power..?, is that the new rom you've already installed earlier..already by default it had enabled usb debugging under system settings..?

JJeamy said:
no..you will lost it
what the state of your phone bootloader..?
unlocked or locked or nothing ?
s-on or s-off ?
hboot - ???
n your phone still can't go to bootloader with press volume down + power..?, is that the new rom you've already installed earlier..already by default it had enabled usb debugging under system settings..?
Click to expand...
Click to collapse
No, I can't go to bootloader with volume down+power. About state of phone... S-off, that's I know. The ROM is installed earlier, but today I perform full wipe, and then installed ROM again, not backup/recovery, but fresh install. USB debugging is, as far I know, disabled... What should I do?

SkipperRi said:
No, I can't go to bootloader with volume down+power. About state of phone... S-off, that's I know. The ROM is installed earlier, but today I perform full wipe, and then installed ROM again, not backup/recovery, but fresh install. USB debugging is, as far I know, disabled... What should I do?
Click to expand...
Click to collapse
did you already try it adb is connected or not..?, just try first with "adb devices" (while the phone is on booting and had a black screen)
anyway why your phone can't go into bootloader by pressing volume down + power..?, is that already broken with your volume rocker..?
what happen if your pull out the battery first just a few minutes..then put in back again..and try it again pressing volume down+power..

JJeamy said:
did you already try it adb is connected or not..?, just try first with "adb devices" (while the phone is on booting and had a black screen)
anyway why your phone can't go into bootloader by pressing volume down + power..?, is that already broken with your volume rocker..?
what happen if your pull out the battery first just a few minutes..then put in back again..and try it again pressing volume down+power..
Click to expand...
Click to collapse
I don't know why can't go into bootloader with volumeD+power... I pulled battery, but everything is same. Can you please explain to me how can I try with adb?
Thank you so much for help!

SkipperRi said:
I don't know why can't go into bootloader with volumeD+power... I pulled battery, but everything is same. Can you please explain to me how can I try with adb?
Thank you so much for help!
Click to expand...
Click to collapse
i assume that you already had SDK/ADT or adb.exe and fastboot.exe on your PC.. if not just downloading from here..
and already had installing the latest HTC driver on your PC..
firstly your let the phone is boot like normal..then after you see the black screen..try connecting it to your pc..
then open your SDK folder (place of adb and fastboot.exe) then run cmd and source to your adb folder.. example : if your adb folder is in "C:/android tools/" then you must change source to that folder with typing "cd C:\android tools", now you ready to used it..don't closed it..just let it open
while your phone already booting n had black screen..then already connecting it to usb on your pc..then firstly try typing "adb devices" to check that's the phone is already connected with adb..
if your phone is detected..then you had prompt after that is your phone serial number that on list of attached devices
if success connected..then you can typing "adb reboot-bootloader" or "adb reboot recovery" (all command w/o quote)

JJeamy said:
i assume that you already had SDK/ADT or adb.exe and fastboot.exe on your PC..
firstly your let the phone is boot like normal..then after you see the black screen..try connecting it to your pc..
then open your SDK folder (place of adb and fastboot.exe) then run cmd and source to your adb folder.. example : if your adb folder is in "C:/android tools/" then you must change source to that folder with typing "cd C:\android tools", now you ready to used it..don't closed it..just let it open
while your phone already booting n had black screen..then already connecting it to usb on your pc..then firstly try typing "adb devices" to check that's the phone is already connected with adb..
if your phone is detected..then you had prompt after that is your phone serial number that on list of attached devices
if success connected..then you can typing "adb reboot-bootloader" or "adb reboot recovery" (all command w/o quote)
Click to expand...
Click to collapse
Thank you so much! I'll go and try right now and let you know what's going on.

JJeamy said:
while your phone already booting n had black screen..then already connecting it to usb on your pc..then firstly try typing "adb devices" to check that's the phone is already connected with adb..
(all command w/o quote)
Click to expand...
Click to collapse
Nothing. Here is what I get in CMD:
Code:
C:\adbfastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
What now?!

SkipperRi said:
Nothing. Here is what I get in CMD:
Code:
C:\adbfastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
What now?!
Click to expand...
Click to collapse
wel on my windows 8 i also get that blank line whre the serial number from the device should be but in my case its connected 'cause i can push files and to adb commands with it.
try to do adb reboot-bootloader and see if if does that

lexuz said:
wel on my windows 8 i also get that blank line whre the serial number from the device should be but in my case its connected 'cause i can push files and to adb commands with it.
try to do adb reboot-bootloader and see if if does that
Click to expand...
Click to collapse
Hm, I'm also on Windows 8, when I try command: adb reboot recovery then I get error: device not found.
But, when I connect/disconnect phone via USB there is a sound that detect connection...

SkipperRi said:
Hm, I'm also on Windows 8, when I try command: adb reboot recovery then I get error: device not found.
But, when I connect/disconnect phone via USB there is a sound that detect connection...
Click to expand...
Click to collapse
sorry can't help you more its up to the gurus here, try the thread ace think tank here on the forum

SkipperRi said:
Nothing. Here is what I get in CMD:
Code:
C:\adbfastboot>adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
What now?!
Click to expand...
Click to collapse
you sure that your pc already had latest HTC driver right and support with your OS..?
if so..maybe that's the usb debugging is not already active on your phone indeed..
because what i know is that just had two option to access your phone again:
1. with your volume down+power to access bootloader of your phone..and you can do it everything from there..
2. with adb command on android home of your phone..
while both option that is doesn't work..i'm sorry..i don't know more how the way to access your bootloader again beside the two way above..
anyway maybe you can try it again like the first way you success go into bootloader with pull out the battery over few hours like before..
and when you've already success flashing new rom again..don't forget firstly to enable it usb debugging from system settings..and connect as charge mode only..
and don't forget to disable fast boot mode too from system settings if you using sense rom

lexuz said:
sorry can't help you more its up to the gurus here, try the thread ace think tank here on the forum
Click to expand...
Click to collapse
Thank you anyway...
JJeamy said:
you sure that your pc already had latest HTC driver right and support with your OS..?
if so..maybe that's the usb debugging is not already active on your phone indeed..
because what i know is that just had two option to access your phone again:
1. with your volume down+power to access bootloader of your phone..and you can do it everything from there..
2. with adb command on android home of your phone..
while both option that is doesn't work..i'm sorry..i don't know more how the way to access your bootloader again beside the two way above..
anyway maybe you can try it again like the first way you success go into bootloader with pull out the battery over few hours like before..
and when you've already success flashing new rom again..don't forget firstly to enable it usb debugging from system settings..and connect as charge mode only..
and don't forget to disable fast boot mode too from system settings if you using sense rom
Click to expand...
Click to collapse
Yes, I have valid drivers, because before this disaster it was possible to connect phone with PC without any problems.
Have you any idea why the phone go "dead" after few hours working just perfect? Hardware or ROM related issue, what do you think?
I pulled battery out just now, for tommorow morning I giving up, maybe I'll be lucky and again I can with volume down + power booting into Recovery Mode.
Thank you, my friend!
P.S. Do you have any suggestion for some stable and good ROM?

SkipperRi said:
Thank you anyway...
Yes, I have valid drivers, because before this disaster it was possible to connect phone with PC without any problems.
Have you any idea why the phone go "dead" after few hours working just perfect? Hardware or ROM related issue, what do you think?
I pulled battery out just now, for tommorow morning I giving up, maybe I'll be lucky and again I can with volume down + power booting into Recovery Mode.
Thank you, my friend!
P.S. Do you have any suggestion for some stable and good ROM?
Click to expand...
Click to collapse
i'm not sure about that..until now..what i see is still software related..but i don't know what software exactly had the problem is..
can be from the recovery that you had installed the rom..or else..
to make sure what exactly is.. you must return the phone to the stock..stock bootloader, stock rom and stock recovery too..all back to the stock..with flashing stock RUU while your phone back in normal condition..
you know the forum rule is doesn't give any permission to all member for compare the rom..

Bricked Huawei watch, please help

Was in the process of flashing the 2.0 preview, ADB worked as well as fastboot. Before I unlocked the bootloader I wanted to see what the recovery looked like. Now the watch will start up with the huawei logo then flashes to android on his back with the red exclamation mark and says:
Supported API: 3
E: failed to mount /cache invalid
(it happens so fast I can't catch it all) and just loops every 5 sec or so.
I can manually get it to restart into bootloader but regardless of what I choose I get the same result. ADB will no longer find the device. I've tried everything I can find here as far as changing drivers and nothing is working. The only thing I can come up with is that when it first connected to my pc I hit "allow" not "always allow from this device". Is that stopping ADB from locating it now?
any help would be appreciated, I love this watch and seriously regret not just waiting for the ota.
*FIXED* although adb could not find my device sending the unlock command worked. Would still like to know how booting into recovery caused this.

Misery420 said:
I can manually get it to restart into bootloader but regardless of what I choose I get the same result. ADB will no longer find the device. I've tried everything I can find here as far as changing drivers and nothing is working. The only thing I can come up with is that when it first connected to my pc I hit "allow" not "always allow from this device". Is that stopping ADB from locating it now?
any help would be appreciated, I love this watch and seriously regret not just waiting for the ota.
Click to expand...
Click to collapse
When you are in bootloader mode, you should use "fastboot" instead of "adb". So boot into bootloader mode, then try the command: fastboot devices. If your watch is recognized, it is easy now. Run flash-all.bat from "sturgeon-mec23l" to flash stock MM firmware.

quantan said:
When you are in bootloader mode, you should use "fastboot" instead of "adb". So boot into bootloader mode, then try the command: fastboot devices. If your watch is recognized, it is easy now. Run flash-all.bat from "sturgeon-mec23l" to flash stock MM firmware.
Click to expand...
Click to collapse
Thanks for the reply, everything is working now :good::good:

Oh I have the same problem, may opened a topic... Except my watch stays on the huawei logo without the android image, but same error. But my bootloader is already unlocked, what command do I use?
Sent from my SM-G935F using XDA-Developers mobile app

Fastboot flash-all.bat should do it.

Hi guys. I was also flashing android wear 2.0 to my watch. Suddenly my watch was bricked. It doesnt even want to connect to my computer. What can I do? Thanks
Gerald

Hello
I have purchase this huawei watch on ebay
and i have the logo huawei on the watch but nothing
When i push the boutton, the watch reboot and again on the logo
adb devices say no devices
fastboot is waiting a devices
please help me
thanks

nicolas90340 said:
Hello
I have purchase this huawei watch on ebay
and i have the logo huawei on the watch but nothing
When i push the boutton, the watch reboot and again on the logo
adb devices say no devices
fastboot is waiting a devices
please help me
thanks
Click to expand...
Click to collapse
Look here. Last post
http://forum.xda-developers.com/huawei-watch/help/stuck-boot-animation-screen-t3328862

Pkt_Lnt said:
Look here. Last post
http://forum.xda-developers.com/huawei-watch/help/stuck-boot-animation-screen-t3328862
Click to expand...
Click to collapse
Thanks
It's ok Now

Misery420 said:
Was in the process of flashing the 2.0 preview, ADB worked as well as fastboot. Before I unlocked the bootloader I wanted to see what the recovery looked like. Now the watch will start up with the huawei logo then flashes to android on his back with the red exclamation mark and says:
Supported API: 3
E: failed to mount /cache invalid
(it happens so fast I can't catch it all) and just loops every 5 sec or so.
I can manually get it to restart into bootloader but regardless of what I choose I get the same result. ADB will no longer find the device. I've tried everything I can find here as far as changing drivers and nothing is working. The only thing I can come up with is that when it first connected to my pc I hit "allow" not "always allow from this device". Is that stopping ADB from locating it now?
any help would be appreciated, I love this watch and seriously regret not just waiting for the ota.
*FIXED* although adb could not find my device sending the unlock command worked. Would still like to know how booting into recovery caused this.
Click to expand...
Click to collapse
I have the same problem now... Can you please help me
What should I do..
---------- Post added at 05:30 PM ---------- Previous post was at 05:11 PM ----------
quantan said:
When you are in bootloader mode, you should use "fastboot" instead of "adb". So boot into bootloader mode, then try the command: fastboot devices. If your watch is recognized, it is easy now. Run flash-all.bat from "sturgeon-mec23l" to flash stock MM firmware.
Click to expand...
Click to collapse
What can I do if my watch is not recognized??
Please help ??

Pher3ona said:
What can I do if my watch is not recognized??
Please help
Click to expand...
Click to collapse
Have you installed the driver? If not, take a look at this page: https://www.reddit.com/r/hwatch/comments/3n9ckp/how_to_get_adb_access_over_usb/

Cant boot into Recovery and Download Mod (LG G4 H815)

hi.
my phone is not going into recovery and download.. i tried every thing but nothng
when going to stock recovery it shows secure boot error 1003
and when try to boot into download mode it shows secure boot error 1004 on the upper cornr of the phn...
plz help me.

I think your phone become 9008.
Look this:
http://forum.xda-developers.com/g4/development/unbrick-lg-g4-h815-9008-qualcomm-t3452853

pengpengback said:
I think your phone become 9008.
Look this:
http://forum.xda-developers.com/g4/development/unbrick-lg-g4-h815-9008-qualcomm-t3452853
Click to expand...
Click to collapse
one thing i forget to say that my phone works normally. i mean in every day driver its ok. but cant boot into download or recovery?
and i tried your link but nothng?

I got very similar problem. Phone works fine but download mode shows error 1014. But I can boot to recovery mod via adb command "adb reboot recovery". Try to setup adb drivers on ur pc & put ur phone into debugging mode. & Did u try the method mentioned by pengpengback ?

vishvesh098 said:
I got very similar problem. Phone works fine but download mode shows error 1014. But I can boot to recovery mod via adb command "adb reboot recovery". Try to setup adb drivers on ur pc & put ur phone into debugging mode. & Did u try the method mentioned by pengpengback ?
Click to expand...
Click to collapse
Yes i did. But When i bought this phn i hardrest it from recovery but for second time i cant boot into recovery and it gives me error code 1013.
Download the file, write on 16hb m card put in phn then start but phn start normally. I dont undrstand if i m missing some thng...

tanvir1987 said:
Yes i did. But When i bought this phn i hardrest it from recovery but for second time i cant boot into recovery and it gives me error code 1013.
Download the file, write on 16hb m card put in phn then start but phn start normally. I dont undrstand if i m missing some thng...
Click to expand...
Click to collapse
Then try pm experts on this forum. Hope we can get solution !

Is OEM unlock set in android settings?
.

steadfasterX said:
Is OEM unlock set in android settings?
.
Click to expand...
Click to collapse
Yes. i tried every thing which i fnd on xda. every possible solution but cant boot to recovery or download mode.

tanvir1987 said:
Yes. i tried every thing which i fnd on xda. every possible solution but cant boot to recovery or download mode.
Click to expand...
Click to collapse
key combos doesn't work?
what combo have u tried?
.

steadfasterX said:
Is OEM unlock set in android settings?
.
Click to expand...
Click to collapse
steadfasterX said:
key combos doesn't work?
what combo have u tried?
Switched off the phone, removed the betray then press and hold volume - and power up the phone. when lg logo appears i release the power button for a sec and then press hold but nothing. then i removed the betray and press and hold power and volume down keys simultaneously for 4 or 5 seconds. recovery screen appears saying loading recovery but on upper left corner it shows secure boot error code 1002. i also tried to boot into download mode by holding volume up and putting cable into phone to connect with pc but same problem with different code. error code 1013.
Click to expand...
Click to collapse