[Magisk] Choosing version that passes safetynet on begonia - Redmi Note 8 Pro Questions & Answers

Hello, I want to root my device and install magisk. This is my device:
xiaomi redmi note 8 pro (begonia)
Miui Global Stable 12.5.7.0 (RGGEUXM)
Android Version: 11 RP1A.200720.011
Bootloader: unlocked
I flashed twrp with BRP3.5.2v3.1.
Code:
ECHO Recovery for Miui 12.5 Android 11
fastboot flash recovery BRP3.5.2v3.1.img
fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification
fastboot reboot recovery
I installed contained Magisk-v22103.zip via twrp > advanced > install magisk. TWRP flashing window shows Magisk 23.0 Installer.
Then Wipe Cache / Dalvic. Then > advanced > close avb 2.0.
Then Wipe Cache / Dalvic. Then Reboot System.
Starting magisk app shows version 23.0 (23000) paket com.topjohnwu.magisk.
Status SafetyNet check: basicIntegrity negative, ctsProfile negative, evalType Hardware.
I followed two guides with loading magisk modules MagiskHide_Props_Config-v6.1.2-v137(75), Riru-v26.1.4.r522.8b379cedb5(522).zip, safetynet-fix-v2.1.1.zip and safetynet-fix-v2.2.1.zip, Busybox_for_Android_NDK-1.34.1(13411).zip.
I installed Termux app, hit commands su + setenforce 0. I did fingerprinting Google Pixel 5 and 4a.
Both these guides not helped passing the safetynet check, since
Status SafetyNet check: basicIntegrity positive, ctsProfile negative, evalType Hardware.
While Magisk-v22103.zip has SafetyNet check, Magisk-25.2.zip doesn't have and Magisk-25.2.zip is not able to load any modules by internet but just by 'install from storage'.
Why is it like that and what should I do to install magisk properly passing the safetynet check?

Related

[ROOT/MAGISK] OOS 10.0.14 Magisk patched_boot.img GLOBAL

For future use or other versions like OOS EUROPE,INDIA, etc. , you can patch your own boot.img with my tool here
But for now just follow the instructions
Boot.img patched with MAGISK 20.4 on OOS 10.0.14 HD65AA (GLOBAL)
Only for OOS 10.0.14 Global!!!!
Enjoy!
Instructions:
reboot to fastboot
Code:
adb reboot bootloader
Code:
fastboot boot magisk_patched_10_0_14.img
let it boot and check if u have root
if u got root then reboot to fastboot again
Code:
adb reboot bootloader
Code:
fastboot flash boot magisk_patched_10_0_14.img
When finished type
Code:
fastboot reboot
patched boot.img download: https://drive.google.com/file/d/1wZ2TyIi0uUfbRTxPYK_imURBVjHqaA_f/view?usp=sharing
stock boot.img download: https://drive.google.com/file/d/1R90vvdJEe6NkL2FdqSvuxtk18SmWHYUc/view?usp=sharing
It's still telling me "Root access is not properly installed on this device". I have an unlocked bootloader and OOS 10.0.14 HD65AA (GLOBAL), is there something I'm missing?
EDIT: tried a different root checker and I'm fine. Please disregard.
daaper said:
"Root access is not properly installed on this device"
Click to expand...
Click to collapse
Install Magdisk Manager
Thanks and much appreciate for the patched file!
Hello. No internet after booting.

Oreo - Magisk Patch

********
Don't flash the patched boot, boot it and use Magisk manager to install (direct). It will flash the correct boot partition for you.

MAGISK fail ramdisk: not

Hello, I'm trying to install magisk and ramdisk says 'no', I tried some different versions and HIDE magisk I'm having the same problem
safetynet into magisk says :
basicIntegrity -
ctsprofile -
evaltype HARDWARE
safetynet googleplay version says:
mi 9 se fail
safetynet request success
response signature validation fail (response payload validation failed )
my room is the global stock 12.0.4.0 QFBEUXM
my twrp is twrp-3.5.2_9-0-grus.img
my bootloader is unlock
android version 10
I downloaded the firmware, extract the boot.img , patched it through magisk and flash via fastbot, but still RAMDISK says NOT ..
= /
i'm lost
any solutionS?
THANKS <3

Root without TWRP possible?

Like described in Magisk howto install at GitHub
Any experience?
Thnx
Reinar Gleich said:
Like described in Magisk howto install at GitHub
Any experience?
Thnx
Click to expand...
Click to collapse
Less cmd method:
(Need TWRP but you still get stock at the end)
1/Unlock bootloader
2/Flash BRP v2.7 for 12.0.x Miui or v3.0 12.5.x Miui up to your phone version (Run file 1.Flash...bat in Fastboot mode)
3/Advanced>Magisk Install (or Install Magisk)
4/Advanced>Patch vbmeta
5/Flash stock recovery in Fastboot mode
(If bootloop use command to disable avb)
Cmd method:
1/ Unlock bootloader
2/ Take boot.img from rom > Install with Magisk
3/ Flash patched boot.img
4/ Take vbmeta.img from rom and use command to disable avb
Kirasu2080 said:
Less cmd method:
(Need TWRP but you still get stock at the end)
1/Unlock bootloader
2/Flash BRP v2.7 for 12.0.x Miui or v3.0 12.5.x Miui up to your phone version (Run file 1.Flash...bat in Fastboot mode)
3/Advanced>Magisk Install (or Install Magisk)
4/Advanced>Patch vbmeta
5/Flash stock recovery in Fastboot mode
(If bootloop use command to disable avb)
Cmd method:
1/ Unlock bootloader
2/ Take boot.img from rom > Install with Magisk
3/ Flash patched boot.img
4/ Take vbmeta.img from rom and use command to disable avb
Click to expand...
Click to collapse
Thank you for the information

Magisk installed but not installed

So I would like to root my a505f I installed OrangeFOX Recovery and when I tried to flash Magisk25.2.zip it is installed successfully without any errors but when I rebooting my device into the System Partition and opened Magisk manager I saw:
Magisk:
installed n/a
A/B No
Ramdisk No
SAR Yes
For some reason Magisk can only installed on the Recovery partition and I would like to install it on the system partition because the Recovery partition is very limited.
any knowledge would be appreciated
Model: SM-A505F ILO
AP VERSION: A505FDDS9CWA1
ANDROID VERSION: Android 11, One UI 3.0
SECURITY PATCH LEVEL: 2023-01-01
LoLzX said:
So I would like to root my a505f I installed OrangeFOX Recovery and when I tried to flash Magisk25.2.zip it is installed successfully without any errors but when I rebooting my device into the System Partition and opened Magisk manager I saw:
Magisk:
installed n/a
A/B No
Ramdisk No
SAR Yes
For some reason Magisk can only installed on the Recovery partition and I would like to install it on the system partition because the Recovery partition is very limited.
any knowledge would be appreciated
Model: SM-A505F ILO
AP VERSION: A505FDDS9CWA1
ANDROID VERSION: Android 11, One UI 3.0
SECURITY PATCH LEVEL: 2023-01-01
Click to expand...
Click to collapse
Maybe read Magisk's FAQs about samsung devices
Recovery Root is old method. Use patched-kernel method
Ok thanks

Categories

Resources