I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE YOUR WARRANTY MAY BE VOID AFTER THIS PROCEDURE
UPDATED 06/04/23
You are now on your way to degoogle your Realme GT Master edition!
1. Figuring out your device model
This guide was tested on the RMX3363 with LineageOS built for RMX3360
Click to expand...
Click to collapse
2. Now let's figure out what you need to download:
Deep testing app (this can be found on the realme forums, some versions may not work)
Click to expand...
Click to collapse
ADB/Fastboot (always download from the official site/repo) [15 seconds ADB installer]
Click to expand...
Click to collapse
Magisk apk 25.2 (always download from the official site/repo) [github repo]
Click to expand...
Click to collapse
Your custom ROM, i recommend using LineageOS
LineageOS lunaa build [pjgowtham releases]
Click to expand...
Click to collapse
LineageOS recovery [you must use THIS recovery if you are installing the "lunaa" build]
Click to expand...
Click to collapse
3. Now you need to
enable Developer options (clicking build number multiple times)
Click to expand...
Click to collapse
enable USB Debugging
Click to expand...
Click to collapse
enable OEM Unlocking in developer options
Click to expand...
Click to collapse
4. Let's start!
Plug your phone into your pc usb
Click to expand...
Click to collapse
Install and launch the Deep test apk
Click to expand...
Click to collapse
Restart into fastboot mode (fastboot reboot bootloader)
Click to expand...
Click to collapse
Now from the pc side
Code:
fastboot devices
Code:
fastboot flashing unlock
In the fastboot menu you will be prompted with 2 selections:
DO NOT UNLOCK THE BOOTLOADER
UNLOCK THE BOOTLOADER
Navigate to "unlock the bootloader" with volume buttons and confirm with power button
YOUR DEVICE DATA WILL BE WIPED
Now your device bootloader is unlocked!
Q: How can i check if my bootloader is unlocked?
A: Go into developer settings and find the "OEM Unlock" slider, it should be locked to the right
5. Custom ROM
Restart into fastboot
Click to expand...
Click to collapse
Run code:
Code:
fastboot devices
Code:
fastboot flash boot_a recovery.img
Code:
fastboot flash boot_b recovery.img
Restart into recovery
Click to expand...
Click to collapse
Launch ADB sideload ("Apply update" then "Apply from ADB")
Click to expand...
Click to collapse
Run code
Code:
adb sideload <rom name>.zip
After the sideload you can start using your phone normally, or:
6. Patch your custom ROM with Magisk
CAN SKIP IF YOU DO NOT WANT ROOT PRIVILEGES
Extract boot.img from you custom ROM
Click to expand...
Click to collapse
How do you do this?
Use the LineageOS extractor [github]
Click to expand...
Click to collapse
Run code:
Code:
py extract.py <rom name>.zip
Find "boot.img" in the "output" folder and patch with Magisk (if you use the .apk you have to push the file on an android device, install magisk on it and then pull it back to your pc)
Click to expand...
Click to collapse
Code:
fastboot flash boot_(a/b) patched-boot.img
Now you have root privileges!
Congratulations, maikuITA! Your simplified guide on how to unlock the RMX336X bootloader is very helpful to the community. Your effort to make the process easier for users is truly appreciated. Keep up the great work!
Great basic tutorial Thanks...But here help me out please I already unlocked bootloader and installed custom rom (pixelplus ui), now just want to have root so how to do it?
after extracting pixel plus ui and payload dumper for my device I got no recovery img instead I got this files..image below :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so like what to patch and flash?
ASIFPIAL said:
Great basic tutorial Thanks...But here help me out please I already unlocked bootloader and installed custom rom (pixelplus ui), now just want to have root so how to do it?
after extracting pixel plus ui and payload dumper for my device I got no recovery img instead I got this files..image below :
View attachment 5878259
so like what to patch and flash?
Click to expand...
Click to collapse
You need to patch with Magisk and then flash back boot.img and vendor_boot.img
maikuITA said:
You need to patch with Magisk and then flash back boot.img and vendor_boot.img
Click to expand...
Click to collapse
Patching and flashing only boot.img worked
ASIFPIAL said:
Patching and flashing only boot.img worked
Click to expand...
Click to collapse
It's fine, it was only boot.img for my RMX
After downloading recovery tool i got few files instand of only recovery.img can u help me what i need to flash from this
If you have installed LOS recovery, to have root privileges that's easier to change Magisk extension from apk to zip and flash it by adb sideload, no need to extract boot.img.
enonaw said:
If you have installed LOS recovery, to have root privileges that's easier to change Magisk extension from apk to zip and flash it by adb sideload, no need to extract boot.img.
Click to expand...
Click to collapse
I got recovery tool in zip dont in img file where u have boot.img and few others
KSTT03 said:
I got recovery tool in zip dont in img file where u have boot.img and few others
Click to expand...
Click to collapse
Where did you get LOS recovery zip ? You have .img files into it and a script with commands : it couldn't be easier.
LOS recovery : here
And why did you quote me because I was talking about Magisk to get root, which has nothing to do with recovery ?
i cant find any working deep test apk. can someone provide me a link or anything?
ajamboboy said:
i cant find any working deep test apk. can someone provide me a link or anything?
Click to expand...
Click to collapse
If you are on RUI4
enonaw said:
If you are on RUI4
Click to expand...
Click to collapse
thanks will try
Hello,
After trying the step 5, my phone broke.
This is the command I typed in adb :
So, I used the flash.bat in the lunaa recovery. All seems fine but now my phone is in the Fastboot mode page where I can choose between : START, Restart bootloader, Recovery mode, Show barcode, Power off.
If I choose "start", restart bootloader, recovery mode, I just return on the same screen. Can't find my phone in adb window.
What should I do ?
Thanks
Restored to stock rom by following those lines : https://forum.xda-developers.com/t/...360-unlcoked-only-access-to-fastboot.4479597/
Will try LOS recovery tomorrow.
Worked on 2nd try. Got an "cannot read" error when I had to sideload lineage ROM, I just needed to use Large Adress Aware to patch "adb.exe".
Any one who use Los can you post you screen on time
I hate this phone everything is good but software is bad rui 4 battery life less than 4 hours on normal use thats not acceptable before i was getting 6-7 hours normally
sym_m said:
Any one who use Los can you post you screen on time
I hate this phone everything is good but software is bad rui 4 battery life less than 4 hours on normal use thats not acceptable before i was getting 6-7 hours normally
Click to expand...
Click to collapse
(Edited : statistics removed because under calculation)
enonaw said:
(This corresponds to the reality for me with LOS 20230415, I never managed to discharge my battery completely in 1 day. PS : no games)
View attachment 5904443
Click to expand...
Click to collapse
Its less than expected u cant use lower frimware? The rui frimware was the best in terms of battery life
sym_m said:
Its less than expected u cant use lower frimware? The rui frimware was the best in terms of battery life
Click to expand...
Click to collapse
LOS uses the RUI firmware. But I admit that I had more autonomy with LOS CXX (RUI3) firmware than with LOS FXX (RUI4) firmware.
I also noticed that the battery discharges quickly when using on the move (changing 5G/4G/3G antennas). Less when the network is fixed. And the 5G network is the least consuming (faster data exchange so less used chip ?)
You can try to do a calibration :
*undisturbed
Don't trust the estimated data I posted, I had just installed the app and the range is increasing. I'll give you some numbers after the weekend.
Related
Firstly, when plugging my 7t in to my windows 10 PC, I am asked to choose which mode to go in within usb preferences, as I did previously in order to achieve and ADB driver connection I chose file transfer.......
this didn't work for some reason, only when in MIDI did I get a confirmation with adb devices.....even though there is still no sign of adb interface in device manager.....
any ideas? I can get adb connection with MIDI but is this good enough to flash recoveries/boot images etc....?
I tried to flash twrp and I could successfully boot into twrp directly via fastboot but twrp couldn't seen any of my storage, despite having all security methods turned off...
all i want to do is gain root access but I am having no joy....
ever since android 10 rooting anything for me has been a pain in the ass......truly fed up....it shouldn't be this hard......
I also flashed a patched boot image in an attempt to gain root access but it all did was break my wifi........which i fixed by copying over the latest image and installing locally......
please HELP....
Everything about this issues is already said in this forum.
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
sweet, ill check it out.....
ontwykende said:
Try looking at this topic here:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
Click to expand...
Click to collapse
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?
mediaman123 said:
It would seem that TWRP is a no go, for awhile at least.....
anyone managed to gain root access by flashing a patched boot.img?
Click to expand...
Click to collapse
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root
Josh McGrath said:
Lots of people have. Just boot your version and use magisk to direct install and reboot then you have root
Click to expand...
Click to collapse
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..
mediaman123 said:
Normally I would be able to carry out such tasks but because I now feel so fed up with it all could I trouble you to tell my step by step how that is done.....?
many thanks..
Click to expand...
Click to collapse
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fawazahmed0 said:
I made a tool to install the latest ADB, Fastboot and USB drivers for windows, its very easy to use, just double click the file to start the installation process
you can see it here:
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
Screenshot:
Click to expand...
Click to collapse
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..
mediaman123 said:
I can operate that fine, its just how to obtain boot.img files etc, patch them and so on..
Click to expand...
Click to collapse
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp
fawazahmed0 said:
Oh, I thought, you are have issues with adb, and for root, you just have to flash magisk using twrp
Click to expand...
Click to collapse
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?
mediaman123 said:
thanks for this......want to try and avoid wiping if possible but if I really want root I will do it.....
what does the command fastboot -w do?
Click to expand...
Click to collapse
it wipe's the data
mediaman123 said:
This isn't functional at the minute as TWRP, whether its flashed or booted from, cant get past the encryption.......it cant see/mount the internal storage....
Click to expand...
Click to collapse
fawazahmed0 said:
You will have to wipe the data and then twrp can access internal storage.
This is how I did (in my phone, which is not Oneplus, but the process remain same for all phones), boot to fastboot mode and type this:
fastboot -w
Now, boot your phone to recovery mode:
(Now take complete twrp backup of your phone, and save it in your pc, before proceeding futher)
flash DM verity disabler: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
flash magisk: https://github.com/topjohnwu/magisk_files/raw/canary/magisk-release.zip
Now boot the phone back to OS and you will have root access
Click to expand...
Click to collapse
TWRP is not functional at the moment, so stay away from it.
The only way to root right now is to use the patch boot image method.
Lossyx said:
No don't do this.... This is not about encryption at all. It's about the major partitioning changes that has happened in Android 10. Wiping the system will just make everything worse.
Avoid using TWRP at all.
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Oh, I didn't know this phone was on Android 10, Thanks for letting me know.
TWRP doesn't support Android 10 yet.
You can see it here
https://twrp.me/site/update/2019/10/23/twrp-and-android-10.html
Actually there is a twrp compiled for this phone, but that doesn't work , you can see the messages in thread:
https://forum.xda-developers.com/oneplus-7t/development/recovery-unofficial-twrp-recovery-t3976961
The steps I told, was for Android 9 and earlier devices, I assumed, this is an old device.
@mediaman123, So please wait, until twrp starts supporting the Android 10.
And for rooting, I am not sure, whether magisk supports this new phone or not.
Maybe @Lossyx can help you on that.
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs
Lossyx said:
https://forum.xda-developers.com/oneplus-7t/how-to/guide-how-to-root-oneplus-7t-twrp-t3979307
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...
mediaman123 said:
Seen this, however my device, the European version, is running on 10.0.6.....
The only boot images available with that post is the 10.0.3...
wouldn't feel comfortable using them.....
I would like to know how to extract the stock boot image from either the firmware file or the phone itself...
Click to expand...
Click to collapse
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs
Lossyx said:
You can go ahead and just fastboot boot them. If it works then just proceed, if it doesn't, just hold volume up+down and power button. (To boot into fastboot or restart phone)
Nothing will change in the system because it only boots a temporary image.
If your want to extract your own boot image you can use this tool.
https://github.com/cyxx/extract_android_ota_payload
Sent from my OnePlus7TPro using XDA Labs
Click to expand...
Click to collapse
So if it boots an older image successfully I can move it over to the phone to patch to then flash it or use the already patched one and flash that...?..
This is the OnePlus 8 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
mauronofrio said:
This is the OnePlus 8 Pro's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Click to expand...
Click to collapse
Awesome thanks for the support.
Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.
mauronofrio said:
Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.
Click to expand...
Click to collapse
Would you be so kind to elaborate on that? I broke my fingerprint sensor by using a already patched img.. Kind of lazy mistake. But had the phone for just a day so I send it back and I'll be getting a new one tomorrow.
I would love to root it and retain my FP.
mauronofrio said:
Guys with this tool you can finally root your device without have to flash the specified patched boot.img. I hope it will help you and i hope you will not break anymore the fingerprint sensor. Enjoy it.
Click to expand...
Click to collapse
I would also like to know the steps. I'm looking at the tool and when selecting "Only Root" I can choose Magisk 20.4 from the list. The note in the tool says "or you can use 'Only Root' to root your phone you are already in TWRP mode." But as far as I understand there is no legitimate TWRP for our device yet.
Balthazard said:
Would you be so kind to elaborate on that? I broke my fingerprint sensor by using a already patched img.. Kind of lazy mistake. But had the phone for just a day so I send it back and I'll be getting a new one tomorrow.
I would love to root it and retain my FP.
Click to expand...
Click to collapse
letum00 said:
I would also like to know the steps. I'm looking at the tool and when selecting "Only Root" I can choose Magisk 20.4 from the list. The note in the tool says "or you can use 'Only Root' to root your phone you are already in TWRP mode." But as far as I understand there is no legitimate TWRP for our device yet.
Click to expand...
Click to collapse
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.
mauronofrio said:
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.
Click to expand...
Click to collapse
Thank you! I will be doing that when I get my phone.
It's actually just using your twrp build but instead of installing it, booting it and using twrp to flash the stable build of Magisk.
Thank you for your hard work!
Is it possible to restore fingerprint with this tool and appropriate files?
t-mizzle said:
Is it possible to restore fingerprint with this tool and appropriate files?
Click to expand...
Click to collapse
If you lost fingerprint, due to Canary Magisk, just switch to stable Magisk, and reinstall the latest update. If you did a local upgrade the file is still in your download folder. Worked fine for me.
spotmark said:
If you lost fingerprint, due to Canary Magisk, just switch to stable Magisk, and reinstall the latest update. If you did a local upgrade the file is still in your download folder. Worked fine for me.
Click to expand...
Click to collapse
I've tried that, it doesn't work for me.
t-mizzle said:
Is it possible to restore fingerprint with this tool and appropriate files?
Click to expand...
Click to collapse
actually no
Gordietm said:
I've tried that, it doesn't work for me.
Click to expand...
Click to collapse
Restore your persist img ..
If you have a backup...
cultofluna said:
Restore your persist img ..
If you have a backup...
Click to expand...
Click to collapse
I don't have one.
This will work on any version of OOS?
Sent from my IN2025 using Tapatalk
czerdrill said:
This will work on any version of OOS?
Sent from my IN2025 using Tapatalk
Click to expand...
Click to collapse
Yes sure
Thank you mauronofrio..!!!!
Has anyone used this tool yet to unlock the bootloader and root their 8 pro?
I just can't be the first one. Lmao!!!!
Is there a Tool to install on a Chromebook/Linux?
mauronofrio said:
So you should go in "recovery flasher and rooter" option, there you have to select the only TWRP available, check if "only boot" is checked, check "root after boot", select magisk 20.4 and click on the button at the bottom of the page. The TWRP will be booted and magisk flashed, and then from TWRP you can manually reboot to system and your device will be correctly rooted.
Click to expand...
Click to collapse
I'm having some trouble, any guidance would be appreciated. I have "only boot" checked and "root after boot" checked, and the phone just boots into TWRP and then hangs there. I've tried closing the command prompt and selecting "root only" but my device isn't showing up in the device list.
Konfuzion said:
I'm having some trouble, any guidance would be appreciated. I have "only boot" checked and "root after boot" checked, and the phone just boots into TWRP and then hangs there. I've tried closing the command prompt and selecting "root only" but my device isn't showing up in the device list.
Click to expand...
Click to collapse
You have some problems with adb
DISCLAMER!
Follow the instructions shown in this thread at your own risks, I will not be held responsible for bricking your device, you did this yourself.
That said, the information will be kept up to date relatively frequently, and should you follow the steps and ask questions below when unsure, everything will be fine!
No files will be directly provided. Do not use pre-created/re-uploaded content.
Note: This is a GSI (generic system imaging) ROM and the credits go to @eremitein and the link to his thread is below:
[OFFICIAL CAOS GSI]
-----------------------------------------------------------------------------------
The download link to the rom is below:
Click here to download the ROM
----------------------------------------------------------
Here are some requirements to install this ROM on your device.
1. You must have a PC
2. The bootloader of your device must be unlocked. (if you don't know how to unlock the bootloader of your device then the instructions are below.)
3. Your phone's battery must be above 50%
4. You must install this ROM with a clean boot.img. (it is recommended to install this ROM with a clean boot.img, installing this ROM with a patched boot.img can often result in bootlooping/bricking the device.)
-----------------------------------------------
Here's how you can unlock the bootloader of your device.
1.Create a Mi account if you already don't have one.
2. Open up your phone and go into the settings and go into "About phone" then tap on the MIUI version 7 times. (you will unlock the developer options)
3. Now go back from about phone to the settings app and scroll down to "Additional settings" scroll down and you will see "developer options"
4. Open the developer options and turn on "OEM unlocking" and then click on "Mi unlock status" and now turn off the WiFi and turn on your mobile data. Now click on "Add account and device"
5. Go back to the developer options and scroll down and enable "USB debugging"
6. Now go onto your PC and head over to this link (https://en.miui.com/unlock/download_en.html) and download and extract the file that has been downloaded.
7. Go to the exctracted folder, locate and open the .exe file named "miflash_unlock"
8. Login with your Mi account.
9. Connect your device to the PC via a USB cable. (the one that comes in the box is recommended)
10. If the drivers are installed and the device is connected properly then you must see a "Unlock now" option click on it and you will get a 7 days waiting time.
11. After 7 days, try again and if nothing goes wrong your device will be unlocked.
---------------------------------------------------------------------------------------------------------------------------
Now onto installing the ROM:
1. First download and extract this file on your computer SDK Platform tools
2. Download this file and extract it on your computer MIUI 12 ROM download the fastboot file and extract it on your computer.
3. Download the custom ROM and extract it. (the download link is above)
4. Copy and paste the file to the SDK Plaltform tools folder rename the custom ROM file to "system"
5. Copy the vbmeta.img from the MIUI 12 RO folder and paste it in the SDK platform tools folder.
6. Head to your device and power it off, once it is powered off, Hold the volume down button and the power button till the fastboot screen shows up.
7. Now connect the device to your computer and on your computer open the SDK Platform tools folder and make sure that those 2 files are there, "system.img" and "vbmeta.img"
8. Right click and press the shift key at the same time and click on "Open powershell window here"
9. Now in the powershell window, type in the following codes:
Code:
.\fastboot.exe reboot fastboot
.\fastboot.exe --disable-verification flash vbmeta .\vbmeta.img
.\fastboot.exe flash system .\system.img
.\fastboot.exe -w
.\fastboot.exe reboot
-------------------------------------------------------------
If you followed the all steps then your device will be booted up with Android 11.
Nice.
It is MIUI too or AOSP ???
VD171 said:
Nice.
It is MIUI too or AOSP ???
Click to expand...
Click to collapse
AOSP
mirzanuman6612 said:
AOSP
Click to expand...
Click to collapse
Wow... Interesting...
Does it works with TWRP ?
Does it works with all quad camera modes ?
May I install AOSP 10 too or 11 only ?
VD171 said:
Wow... Interesting...
Does it works with TWRP ?
Does it works with all quad camera modes ?
May I install AOSP 10 too or 11 only ?
Click to expand...
Click to collapse
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes for it to work with all quad camera modes.
mirzanuman6612 said:
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes it to work with all quad camera modes.
Click to expand...
Click to collapse
Very good job, my friend
mirzanuman6612 said:
Install the ROM with the link given at the start of the thread. And I recommend installing it through fastboot. And it does not work with all quad camera modes. But I am looking for fixes for it to work with all quad camera modes.
Click to expand...
Click to collapse
Please work on custom rom for redmi note 9 with twrp
Kunalmore said:
Please work on custom rom for redmi note 9 with twrp
Click to expand...
Click to collapse
Twrp is not very stable at the moment.
mirzanuman6612 said:
Twrp is not very stable at the moment.
Click to expand...
Click to collapse
It is having troubles with FBE (File-Based Encryption).
Sad :-(
Good day does this gsi rom have gapps built in, and if not how do i go about installing gapps.
toussaintjames said:
Good day does this gsi rom have gapps built in, and if not how do i go about installing gapps.
Click to expand...
Click to collapse
It does have gapps built in.
When I'm in fastbootd pc stuck on waiting for any device, pls help
satanslave said:
When I'm in fastbootd pc stuck on waiting for any device, pls help
Click to expand...
Click to collapse
Which windows are you using?
Hi, its really nice that you got it working, but for me it sasys that the partition system does not exists. What should i do?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDIT: Should i try to flash the super partition with this Image? I think the super partition is the system partition in my miui because its so big.
EinTim23 said:
Hi, its really nice that you got it working, but for me it sasys that the partition system does not exists. What should i do?View attachment 5174251
EDIT: Should i try to flash the super partition with this Image? I think the super partition is the system partition in my miui because its so big.
View attachment 5174253
Click to expand...
Click to collapse
Read. The. Thread. Properly. And input the commands into the powershell window properly and you will be good.
mirzanuman6612 said:
Read. The. Thread. Properly. And input the commands into the powershell window properly and you will be good.
Click to expand...
Click to collapse
Sorry ist was my fault, i forgot to reboot into fastbootd
Hi, i have a question. Is there a way to fix celluar data? Calls and SMS work fine.
EinTim23 said:
Hi, i have a question. Is there a way to fix celluar data? Calls and SMS work fine.
Click to expand...
Click to collapse
The ROM is still in beta version, so some things might not work. Anyways, how are the other things. Is the ROM stable?
mirzanuman6612 said:
The ROM is still in beta version, so some things might not work. Anyways, how are the other things. Is the ROM stable?
Click to expand...
Click to collapse
The Rom works stable for me and everything i tested works except mobile data. IR remote is working fine too.
Edit: the graphics are a bit laggy too.
mirzanuman6612 said:
Twrp is not very stable at the moment.
Click to expand...
Click to collapse
With twrp my device ends up in a blackscreen and only fastboot works then.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Flashing Instructions:
Pre-installation:
Until TWRP is ready, this version of crDroid comes with prebaked core Gapps
Download LOS recovery
Download Tiny ADB & Fastboot
First time installation (clean flash):
It is recommended to come clean from latest OOS installation
Backup your data to PC, OTG flash drive
Reboot to bootloader (fastboot)
Run fastboot devices to confirm there is connection to the phone
Install LOS recovery with following command fastboot flash boot lineage-18.1-20210615-recovery-lemonadep.img
Power off and reboot to recovery by pressing VOL down + Power from shutdown state
Navigate with volume keys to Factory Reset -> Format data/factory reset and confirm format of data
Go back to main menu and choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
When asked to confirm flash, do confirm it
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Update installation:
Through recovery:
Download latest crDroid zip and reboot to recovery
Choose Apply update and Apply from ADB
Now adb sideload latest crDroid package with adb sideload crDroid.zip
Sideload push will go up to 47% and fail - no worry is normal
Reboot to system
Built-in OTA (slower):
When ready
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/crdroidandroid/android_kernel_oneplus_sm8350
Download:
ROM https://crdroid.net/lemonadep#crDroid-v7
Changelog: https://crdroid.net/lemonadep#crDroid-v7/changelog
Known issues:
- waiting for more feedback to see
Visit official website @ crDroid.net
crDroid OnePlus 9 Pro Telegram
crDroid Community Telegram
crDroid is built with passion by @neobuddy89 and @gwolfu
If you like our work, do consider a donation to support further device development
ROM OS Version: Android 11
ROM Kernel: Linux 5.4
Awesome.
I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?
burtonlax said:
I have the Tmobile version of OP9pro. Will I need to flash the tmobile modem.img?
Click to expand...
Click to collapse
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS
gwolfu said:
Testing of this rom has been done on the EU variant
I am not sure how Tmobile version works, but rom side, is same as on LOS
Click to expand...
Click to collapse
it's best to go global first coming from tmo. No, as long as you don't do an ota on Global. so flash global then boot, then flash custom rom(following their guide).
If u lose service modem is provided (Just unzip) Bootloader fastboot command "fastboot flash modem modem.img
This of course is assuming u got unlock.bin and unlocked Bootloader
Here we go!
Welcome @gwolfu
Hopefully we don't need 11.2.7.7?? It's not out here in EU yet, what's the reason most of the custom roms seem to want the EU build by the way?
CRDroid, fantastic to see this here my favorite ROM since the days of my LG G3! Can't wait to try this out, will sadly be waiting till TWRP tho as I'd prefer to avaoid gapps. Unless there is any chance of a non gapps build also? Cheeky....!
I'll flash and report tomorrow .
post logs through here or telegram?
ryantf420 said:
I'll flash and report tomorrow .
post logs through here or telegram?
Click to expand...
Click to collapse
preferably here as to better keep track of stuff
I know it may not be recommended, but has anyone been able to flash this without using a computer?
phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
Since the instructions specify using fastboot (as well as sideloading the rom), that's not possible.
phr0zen said:
I know it may not be recommended, but has anyone been able to flash this without using a computer?
Click to expand...
Click to collapse
without TWRP, not possible
TWRP is death.
This is awesome news brother
So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?
crazyvash1 said:
So I've been out of the root and rom flashing game for a bit, got it side loaded and everything my issue is i cant get root permissions working wasn't sure how i go about setting it up since all i have worked with on the one plus is magisk and having to install to a .img and input on how to get it working?
Click to expand...
Click to collapse
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy
gwolfu said:
extract crdroid.zip content
extract boot.img from payload.bin file using payload dumper
install magisk apk on phone as any other apk (I know we are not rooted yet)
copy boot.img to internal phone storage
open magisk and click on top install button
choose "select and patch a file"
select the boot.img from internal storage
after done, copy magisk patched boot image from Download folder on phone storage, to PC
now on PC, reboot to bootloader and run
Code:
fastboot flash boot magisk_patched-23000_xxxxx.img
check file name to match xxxxx = random generated text
reboot to system and enjoy
Click to expand...
Click to collapse
Think you missed the last step to use Magisk again to root the installed boot image?
djsubterrain said:
Think you missed the last step to use Magisk again to root the installed boot image?
Click to expand...
Click to collapse
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after
gwolfu said:
Not need
I used fastboot flash not fastboot boot so boot is already patched
No temp boot and patch after
Click to expand...
Click to collapse
Didn't notice that, totally right. Sorry.
truly have found nothing broken
except power menu settings only work in crdroid Settings not in System>Gestures>power menu...
Great job
Hi,
Everytime I try to install recovery device stucks in fastboot screen the only way to get out of it is to install miui thru mi flash
Guide me through how to install custom rom on miui 13.0.7.0
Thanks in advance
Crazymods said:
Hi,
Everytime I try to install recovery device stucks in fastboot screen the only way to get out of it is to install miui thru mi flash
Guide me through how to install custom rom on miui 13.0.7.0
Thanks in advance
Click to expand...
Click to collapse
Installed the correct firmware before flashing.
for example for this rom
https://forum.xda-developers.com/t/rom-12-1-official-pixelos-aosp-stable-15-08-2022.4392297/
This firmware
https://sourceforge.net/projects/pixelos-releases/files/twelve/lisa/firmware/
Most often it is global or CN firmware.
NOSS8 said:
Installed the correct firmware before flashing.
for example for this rom
https://forum.xda-developers.com/t/rom-12-1-official-pixelos-aosp-stable-15-08-2022.4392297/
This firmware
https://sourceforge.net/projects/pixelos-releases/files/twelve/lisa/firmware/
Most often it is global or CN firmware.
Click to expand...
Click to collapse
Thanks for the quick reply
I wanted to install CorvusOs also tried but failed, everytime I try to install recovery it mess ups my firmware
Crazymods said:
Thanks for the quick reply
I wanted to install CorvusOs also tried but failed, everytime I try to install recovery it mess ups my firmware
Click to expand...
Click to collapse
Can you post the rom link?
NOSS8 said:
Can you post the rom link?
Click to expand...
Click to collapse
Thread '[SHARED] CorvusOS 4.0-L v12.1 - UNOFFICIAL | Android 12L. Vanilla/GApps | Updated: 2022/08/22' https://forum.xda-developers.com/t/...12l-vanilla-gapps-updated-2022-08-22.4484681/
Crazymods said:
Thread '[SHARED] CorvusOS 4.0-L v12.1 - UNOFFICIAL | Android 12L. Vanilla/GApps | Updated: 2022/08/22' https://forum.xda-developers.com/t/...12l-vanilla-gapps-updated-2022-08-22.4484681/
Click to expand...
Click to collapse
Seems this ROM is for Renoir device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Think I should flash pixelos
Crazymods said:
Think I should flash pixelos
Click to expand...
Click to collapse
Yeap, try this rom.
Flashing the correct firmware with the TWRP but sometimes it does not work, the method that works 100% is to use Miflash(without relocking the bootloader) and let the phone restart then switch to fastboot mode once arrived at the request of the Xiaomi account.
Install TWRP
Twrp
Wipe/format data type yes
reboot twrp
put the rom in internal storage or use Otg
Flash rom
• After installation complete, Reboot system
if bootloop format data and reboot system.
This method differs from that recommended by the OP but remains the most common one, you can use that of the OP, at your choice.
In any case, formatting the data does not erase the previously installed firmware.
.Use 12 version
https://pixelos.net/download/lisa
NOSS8 said:
Yeap, try this rom.
Flashing the correct firmware with the TWRP but sometimes it does not work, the method that works 100% is to use Miflash(without relocking the bootloader) and let the phone restart then switch to fastboot mode once arrived at the request of the Xiaomi account.
Install TWRP
Twrp
Wipe/format data type yes
reboot twrp
put the rom in internal storage or use Otg
Flash rom
• After installation complete, Reboot system
if bootloop format data and reboot system.
This method differs from that recommended by the OP but remains the most common one, you can use that of the OP, at your choice.
In any case, formatting the data does not erase the previously installed firmware.
.Use 12 version
https://pixelos.net/download/lisa
Click to expand...
Click to collapse
Can you guide more briefly because I messed my os everytime I use adb command
Crazymods said:
Can you guide more briefly because I messed my os everytime I use adb command
Click to expand...
Click to collapse
No ADb command performed.
where are you with the method?
NOSS8 said:
No ADb command performed.
where are you with the method?
Click to expand...
Click to collapse
The moment I type "fastboot flash boot" Drag and drops file I get stuck at bootloop
Crazymods said:
The moment I type "fastboot flash boot" Drag and drops file I get stuck at bootloop
Click to expand...
Click to collapse
Clean flash (coming from a different ROM):
• Reboot to bootloader (fastboot)
• Connect phone to PC
• fastboot flash boot boot.img
• fastboot reboot recovery
• Select Wipe data/factory reset & confirm
• Go back and select Apply update from ADB
• adb sideload PixelOS*.zip
• Flash latest firmware from the link above
• adb sideload fw_lisa*.zip
• After installation complete, Reboot system.
or use my method with twrp.
NOSS8 said:
Clean flash (coming from a different ROM):
• Reboot to bootloader (fastboot)
• Connect phone to PC
• fastboot flash boot boot.img
• fastboot reboot recovery
• Select Wipe data/factory reset & confirm
• Go back and select Apply update from ADB
• adb sideload PixelOS*.zip
• Flash latest firmware from the link above
• adb sideload fw_lisa*.zip
• After installation complete, Reboot system.
or use my method with twrp.
Click to expand...
Click to collapse
Thanks I, ll get back to you
Crazymods said:
Thanks I, ll get back to you
Click to expand...
Click to collapse
In case that doesn't work, detail what you did.
so heres what i did till now
1-i tried to flash twrp and orange fox but unable to boot them i`m stuck at fastboot now
Crazymods said:
so heres what i did till now
1-i tried to flash twrp and orange fox but unable to boot them i`m stuck at fastboot now
Click to expand...
Click to collapse
What command did you use?
NOSS8 said:
What command did you use?
Click to expand...
Click to collapse
"fastboot flash boot" drag and dropped file
Crazymods said:
"fastboot flash boot" drag and dropped file
Click to expand...
Click to collapse
Command is" fastboot boot twrp.img' phone in fastboot mode.
then in Twrp go to Advanced -> flash current TWRP
NOSS8 said:
Command is" fastboot boot twrp.img' phone in fastboot mode.
then in Twrp go to Advanced -> flash current TWRP
Click to expand...
Click to collapse
Rename to twrp.img.
The command from the folder where the img is.
You must have flashed the xiaomi rom first to be on the correct firmware. How did you proceed?