Hello. This is my first thread, I have downloaded maybe hundreds of ROM's from this site, have read thousands of threads and of course bricked a few phones lmao. Now I am here with a REALLY confusing problem. Without further ado, let's dive in. sry for my bad english btw.
I bought a second hand S9 today. The guy whom I bought the device told me, when he turns off the screen of the device by pressing the power button, black and green lines appear when he turns on again, and after a few seconds, when he turns the screen back on by pressing the power button, the problem disappears he told. I think he said there is a problem in the part called screen flex. (I ain't sure what that is, I need info about that too.) Sorry if you're confused this far, cuz more is coming thru
I got a very useful APK file named "OLED/AMOLED Saver" and installed it on my device, it worked really well and the lines were almost invisible anymore. After a few hours of use, what I noticed was even more confusing. I activated the AoD (Always on Display) feature, coincidentally, while testing the screen, when I locked the device by pressing the power button and the clock appeared on the AoD screen, when I turned on the screen in that way, I noticed that the screen did not burn in as if it was brand damn new. But if I don't wait for the AoD screen to show up and immediately press the power button again, the screen turns on completely and something really, really terrible appears, a mixture of black and green. Now let's come to my questions, I've blown your mind a lot I think.
1- Can anyone explain what's going on here?
2- Is the problem in the screen flex or is it purely software? (AoD thing)
3-Is there anyone who has experienced this and was able to completely solve the problem?
Thank you for spending your precious time. Hope I get a solution..
Hello, I have same problem with my old S9, it seems that is fully hardware issue, as a workaround you can set full brightness - it causes this issue to appear less frequently and another option is cooling down the phone - when display is black/green just lock the screen and put your phone to the freezer for a while - it will work properly until it heats again
Its something about an update made by Samsung https://eu.community.samsung.com/t5...t-bars-black-screen-issue/td-p/1745470/page/4
Related
Hi Guys.
I've had my orbit for about 3 weeks now, and its been perfect. I had a spare 512mb microSD card lying about so I used that, but my 2Gb microSD card came in the post yesterday.
I put the card into the phone, and then plugged the phone into my computer via USB. The screen turned off, and no matter what I did, it wouldn't come back on.
I reset it using the small button on the side (sticking my stylex pen into it) and it restarted itself, showing the splash screen no problem, but as soon as you would expect the Today screen to show, the screen goes off. It get's weirder, because if I hold down the camera button to turn that on, the screen switches itself on, and you can use the camera no problem. If i hit the windows key, the menu appears, but if I try clicking an icon, the screen goes dead again.
Also, sometimes (not always, don't ask why) if I leave it for a couple of minutes, the screen slowly appears, as if the backlight is very very dim. But the second i tap anywhere, or touch a button, it goes off again.
I can still answer calls, and my alarms still go off. The phone seems to work perfectly, but just not the screen. I think that it might be the backlight having been turned so far down its off, but I don't know how I would go about reseting that.
Sorry for the long story, but any help would be greatly appreciated.
Cheers
have you tried to make a hard reset?
Man I had the exact sane issue. Its to do with the backlight. I had to angle the screen to try and see anything on it, then changed the backlight to full and made sure it didnt switch off after certain time, everything fine since then. dont know how it happened.
exactly like fubofo wrote,try to unplug,screen should be visible again, check backlight prop.-and plug it in.
i have the same problem this appears sometimes.I think this is a damn bug that appears randomized.It happend to me like 6 times.I have the o2 xda orbit with german o2 rom.What's about yours? it dims the light under the normal makeable settings this sucks.And the camera works because the light settings goes automaticly to the highest settings in camera mode.
Hi guys,
I remember having that problem but it was when I tried some programs, including HTC X-button and another called Invisible Shooter. I haven't got any further incident after uninstalling them.
Do you think what you've encountered with may also link to some program you've installed?
BUSPBP
Totally confirmed! Had same issue after replacing a touch screen. Thanks, guys, for a clue!
Everytime I boot my phone up, it works fine up until when the screen goes into sleep mode. Once it goes into sleep mode I cannot turn the screen back on, it stays black. The keyboard, end and answer key lights show up when I press the power button but the screen just stays black no matter what button I press.
I end up having to either take the battery out or using the stick to press the reset button on the side in order to get the phone to where I can see the screen again. I have adjusted the settings to where the screen doesnt go into sleep mode and the screen just stays on but that drains my battery. I want to be able to have my screen go off so I can save power but if it goes off it wont come on again until I reboot.
I have done a hard reset. This problem started happening to me when I started using the Energy Rom but I've even flashed different Roms and the problem still exist.
Somebody please tell me what's wrong! I need help! This is a big annoying problem to have. Thanks.
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
sh4d0w86 said:
is this problem occurring when you slide the keyboard out?
i had the t-mobile touch pro2 with this problem.
the screen would die when the keyboard was out and not come back.
if this is the case, what i did was...
well. obviously not open the keyboard fully.
but if i accidentally had.
instead of pulling out the battery, i waited...
till the screen 'naturally' went to sleep.
than i would pull out the stylus or press power button
and the screen would come on.
sh4d0w86.
Click to expand...
Click to collapse
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
themasterhook2000 said:
Yes the problem still exist even when I slide the keyboard out. Once the screen goes off, that's it....pressing the power button to get it out of sleep mode, sliding the keyboard, I press all buttons and nothing works. The only thing that "works" to get the screen back on is removing the battery or using the stylus to press the reset button.
When sliding the keyboard out the keys light up but the screen doesn't come on, also pressing the power button lights up the end and answer keys without the screen coming on.
Click to expand...
Click to collapse
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
sh4d0w86 said:
so. whenever the screen goes out, period, you cant get it back?
or the screen goes out and cant get it back once you slide the keyboard out?
if it is only when sliding out the keyboard...
try not opening the keyboard fully on the right side.
on my rhodium, after that point, the screen goes out.
sh4d0w86.
Click to expand...
Click to collapse
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
themasterhook2000 said:
Yes, period. Also, you know when you put your face to the phone during a call and the screen goes off so your face wont press anything on the screen? It doesn't come back on from that either once I end the phone call, it just stays black. I'm assuming you don't have any other suggestions. This Sucks
Click to expand...
Click to collapse
: / sorry. i am unsure.
maybe you have a lose connection?
sh4d0w86.
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Same problem
themasterhook2000 said:
This has to be a software issue but I don't know where to start. I'm surprised nobody else has encountered this problem. I've grown frustrated of this issue because I don't understand why it's doing this. I have had the phone for almost 6 months only dropping it once 4 months ago and it wasn't a strong damaging drop that would affect anything inside. I guess I'll just have to go last resort and call warranty to swap the phone out. Thanks for the help.
Click to expand...
Click to collapse
My phone also dos not come back on, when I put it in out the sreen with the power button on top, or when the phone goes to sleep. Nothing can put it back on(opening te keyboard, pulling out the stylis, presing the answer-, windows-, back- and end button). I and up using a music players too keep the phone busy what's makes it operational. Cant really remember when this started happening exactly. My phone is at the moment loaded with a standard ROM. I used too have a custom ROM.
My TP2 does this too, although I only encounter the problem sometimes when someone calls. I answer and put the phone next to my ear, the screen goes black as it should and the phone just dies. I can't hear what the other person is saying and the screen wont turn on anymore. I have to take out the battery to reboot.
set light sensor to manual in settings. You have some bad or fragmented code causing the problem. Pretty common actually, many different reasons, but usually either a bad light or proximity sensor or software issue. Setting the sensor to manual should do it, if not, hard reset and allow the phone to fully set up before touching it, to allow full customization process to complete. Search my posts on SOD (sleep of death) for more information.
Funny this was brought up. Now im worried I just dropped 250.00 and have a new one coming.
Mine started with the ear piece quit working. couldnt hear anything except on speaker.
Anyway I started having the screen issue over a month ago, only way to get it back was soft reset with the stylus. Also when the screen was lit, I couldn't hit the power button to turn the screen off. At times the screen would be on 24/7 and I just dealt with it. The times when it decieded to go to sleep was when I needed the soft reset. Well long story short I forgot my charger one day at work and the battery died. after pressing the power button for hours with no response, moving the screen in all diffrent directions as I pressed the button.It came on once after hrs of messing with it. Well today it died again and I am fed up with it so out came the tools. Once I opened it up I noticed the ribbon that feeds the screen from the mother board was worn and torn. the ribbon slides everytime the keyboard is slid out and it rubs on both sides of the phone. I thought maybe mine was just a fluke and was installed wrong considering the phone being 10 months old but now I read this and see maybe its a common problem. The cheapest I could find the Ribbon was 56.00 so I didnt want to chance it not being the issue.
So my screen turns off (but is still active) when the slider is nudged a bit (either when closed or open). I've never dropped it and didn't update firmware. Pretty sure its faulty but just wanted to check if anyone else had the same problem. Oh because the phone thinks screen is on to get it back I have to press the power button twice (once to lock then unlock) this works most of the time but not always in which case I have to pull the battery.
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Jordanooo said:
Like this?
http://www.youtube.com/watch?v=fQXH5GAf9UA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Similar but much worse. It takes that much movement to make the screen go off but once off it doesn't come back until you press power button twice ( and sometimes not even then)
I think I'll have to send it off for repair which is a right pain as I won't have my awesome phone for ages.
When i had that problem it only took the a week to repair it
I bought my device (P600) a few month ago,
and suddenly (without changing rom/karnel or doing root) i got a big problem -
when i push the button that close the screen(turn off the screen but the device is still on) or if the screen is turned off automaticly, the screen stay off forever. Even pushing the power button doesnt turn on the screen.
The only way to turn the screen on again is to reset the device (by pushing the power button long press).
I almost sure that the problem is a hardware problem even that it's look like a software problem because after i saw the problem i changed the rom and the karnel to other option to check if the rom/the karnel is the problem and the problem didnt solved.
Someone have a clue which element make the problem?
Thanks (and sorry for my bad english)
shahartal said:
I bought my device (P600) a few month ago,
and suddenly (without changing rom/karnel or doing root) i got a big problem -
when i push the button that close the screen(turn off the screen but the device is still on) or if the screen is turned off automaticly, the screen stay off forever. Even pushing the power button doesnt turn on the screen.
The only way to turn the screen on again is to reset the device (by pushing the power button long press).
I almost sure that the problem is a hardware problem even that it's look like a software problem because after i saw the problem i changed the rom and the karnel to other option to check if the rom/the karnel is the problem and the problem didnt solved.
Someone have a clue which element make the problem?
Thanks (and sorry for my bad english)
Click to expand...
Click to collapse
I'd bet money on it being a backlight issue.
Test it again in a well-lit room with a bright lock screen wallpaper, something with a lot of bright color. Once the screen turns off, wake the device and look carefully to see if you can see anything. You might have to tilt the screen, but you should see a very faint, dark image.
blindmanpb said:
I'd bet money on it being a backlight issue.
Test it again in a well-lit room with a bright lock screen wallpaper, something with a lot of bright color. Once the screen turns off, wake the device and look carefully to see if you can see anything. You might have to tilt the screen, but you should see a very faint, dark image.
Click to expand...
Click to collapse
Amazing that's was the problem!
There is a way to fix it? What is the component that causes this problem?
thank you so much!
shahartal said:
Amazing that's was the problem!
There is a way to fix it? What is the component that causes this problem?
thank you so much!
Click to expand...
Click to collapse
Unfortunately I don't know of any solution other than sending it in for warranty coverage or replacing the screen yourself.
I've seen a couple of other posts on XDA involving the same issue, but never saw a solution. I've even seen this issue a couple of times IRL (not on my device, thankfully) and have not been able to find a solution. The two times I've seen this issue, the backlight level could not be adjusted, either. Whether it was set to automatic or manual brightness, it would never adjust, the backlight was locked at a constant level, until the screen turned off, and then the backlight would NOT come on again until the tablet was restarted. Reflashing stock firmware and doing a factory reset did not help, either. On one of those devices, the backlight DID start working again for a while after a manual wipe of internal storage, but only until the tablet was restarted, and I think that might have been a coincidence, I was not able to replicate that again.
So in short, I'm afraid I don't have a good solution other than hardware repair/replacement via warranty.
this has just happened to mine - will have to send it into repair, but it had CLEAN ROM installed so they might argue re the Knox trigger - really annoyed about this!
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Please upgrade to the newest firmware.
Sydrox said:
Greeting,
I have a weird issue where occasionally after I unlock my phone, my screen doesn't respond to touches.
The phone works and responds to physical button presses but not touch.
Not sure exactly when it started happening but I've noticed this since last week.
Any idea what might be causing this?
I'm running Android Pie 52.0.A.3.202.
Click to expand...
Click to collapse
Got the same issue on 52.0.A.8.50. Usually opening the app drawer then hitting back solves it - otherwise none of the virtual buttons work.
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
bobsright said:
Searching the web it seems touch screen issues are pretty common on this phone. I'm a bit surprised there isn't more being said here about it. Some experience delayed response, dead areas and no response at all. I have all those issues. Yes I am on the latest firmware. I bought the phone used with a cracked screen. I checked it out and everything seemed fine. I didn't use the phone, just set it aside til replacement screen came. I should have used the phone to thoroughly check it out but didn't want to go through the set up process as I was thinking of B/L unlock and root. New screen came, put it on and seemed to be working fine then screen would be unresponsive. I did factory reset, software update, software repair, went into settings and made sure sure everything was good there, nothing helped. The center of the screen (it's low and a bit off center) is pretty much dead. To open launcher I have to touch and hold near the top of the display. Touch and hold apps is tricky. Usually the app just opens. When I do get it to hold, I can't drag it anywhere. Also, icons in the drop down menu cannot be rearranged or edited. I can swipe up/down, side to no problem. Whenever touch goes dead completely, the home, back and minimize buttons go grey. Tapping the power button gets them back functioning again. . Function test fail. Free draw lets me make a few seconds of scribbles then freezes. The x and rectangle block draw does the same. Tapping power button does nothing to unfreeze either. The color test pass even the block one where you toggle on/off sections of the screen in blocks. It's really weird. First impression would lead me to the screen but it really acts like a software issue. From what I've read so far this phone uses two different display drivers. I not seen anything on how to change that and it would more than likely mean B/L unlock and root, which I'm not against doing. I would just like to know definitively if it's hardware or software. Any input would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
Maybe the Screen Connector wasn't 100% clean.
Or not only the screen is damaged.
I heard that the touch problems are mostly fixed with PIE. The closed source clearpad touch driver is..... Hoping Q gives us an further updated driver.
You still get sometimes ghost touches on higher workload or if the keyboard app is slow, but if you have dead spots the hardware sounds damaged.