Develop Bugs

[TREBLE][10.0][arm64] H-VENDOR V1.0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Since I dont have EVERY 7870, this project is open to contributions, so feel free to suggest fixes, improvements or any other thing that could be helpful.
FEATURES
Arm64 vendor ported from J6, A7 2018 and S20
A320X, G610X, J530X, J600X, J701X, J710X, J730X are supported
Android 10 A/B ARM64 supported. Android 11 ready.
H-KERNEL included (3.18.140 kernel compiled from A600FNXXU5CTB9 sources. Built permissive and overclocked. F2fs supported)
AresKernel by @SPARTANICUS supported and recommended
And many more!
KNOWN BUGS
Remember that some bugs could come from GSI side and not from vendor
We haven't tested EVERY 7870 out there, so could be possible that some variants has specific and unknown bugs, or even not booting
Always provide logs and dmesg if you want to report bugs
Common bugs: offlice charging, screen unlock takes a while after a reboot, camera preview streched for some variants or apps. BT calls is a common bug too for some devices. Stock camera flash can be unstable, use footej
A320X: echo in calls
G610X: sometimes, screen delay when coming on, camera flash?
J530X: ?
J600X: NFC could be broken for some variants
J701X: front camera flash
J710X: NFC could be broken for some variants. Audio has a delay for the NM
J730X: ?
You tell me
DOWNLOAD
Current version: 1.0 (16/06/2020)
GoogleDrive folder
Mega folder
md5: 30620c555e13eaecca42ddda56ddec58
INSTALLATION
Vendor partition is required
HIGHLY RECOMMENDED TO USE AN UPDATED RECOVERY. Check my OrangeFox or SHRP builds.
Wipe system, data (clean install mandatory), vendor, dalvik&cache and cache
Flash an Android 10 A/B ARM64 system GSI image
Flash H-VENDOR zip
Reboot
WALLPAPERS
https://imgur.com/a/El75gHV. Thanks to @SaiFurR
ROOT
Flash stable Magisk
SUPPORT
Telegram group
CREDITS
Me, for infinite hours spent with this project
Special thanks to @ananjaser1211, @SPARTANICUS and @Valera1978, and everyone that has contributed to the 7870 development
Huge thanks also to my testers, without them this coundn't have been possible
Thanks to @Kique119, because he pushed me to start this project
And finally thanks to @SaiFurR for the banner and supporting me in every project
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this project you can make me very happy just pushing THANKS
XDA:DevDB Information
H-VENDOR, ROM for the Samsung Galaxy J7
Contributors
Astrako
Source Code: https://gitlab.com/android_samsung_universal7870/common/android_kernel_samsung_exynos7870/-/tree/oneui_q
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2020-06-16
Last Updated 2020-10-06

Reserved

Gotta try it ASAP! Thanks for your hard work

Thanks a lot bro for your great work

I started using J7 2016FQ.
Samsung J710FQ is working completely fixed with the corrections in Telegram support channel mentioned in the article. I wanted to mention this for now thank you for support It has also been a great project.I would like to thank all the developer friends who worked in this study.I think they will make it compatible in android 11 rom by these gorgeous developers soon.Therefore, I recommend all users of 7870 devices to follow this project with certainty.

engin195479 said:
I started to use it with the Havoc 3.6 in J7 2016, my first impressions are very positive, there are minor problems, of course, but they can be corrected.some of these are.First of all, there is a problem with the screen lock, the lock says already entered.secondly, magisk manager gives cts profile: false error.Thirdly, the volume of media playback is low as well, this problem exists in the official rum as well, but it is better if a correction is possible.I also installed the official android 10 first and encountered more problems, these are the bluetooth stopped error and the camera never openedI wanted to say that because some errors seem to be caused by rum, so it is useful to try a few rum for devices.And finally, of course, I would like to thank everyone who contributed to this project for its maturity and I am sure that the problems that are missing and proplem will be solved.I have a question I would like to ask as a note.I could not install android 11 is stuck in the android logo Does the device support android 11 as followsor am I making a mistake in the installation, I would appreciate it if you answer.
Click to expand...
Click to collapse
Use magiskhide props config module to beat the cts profile and don't forget to enable magisk hide option in settings

Is it possible to fix the Offline charging in the next update? Or it is impossible?

Android R on the phone J7 2016

Good job!
:good::good::good:

After finishing all task when I reboot the phone is switching to downloading mode

rizvi.ahmed.125 said:
After finishing all task when I reboot the phone is switching to downloading mode
Click to expand...
Click to collapse
Use ARM64 A/B GSIs

Pin and password of lockscreen does not work

When I call from sim 2 other person do not listen anything...for sim 2 calling microphone does not work

I'm using the A3 2017 but every android 11 gsi I've tried to run was stuck at the roms bootlogo

Zozo99 said:
I'm using the A3 2017 but every android 11 gsi I've tried to run was stuck at the roms bootlogo
Click to expand...
Click to collapse
Check out this TG post, it has a patch for H-Vendor to boot phh Android 11 GSIs, it also fixes Camera too!

Does it fix the impossibility to set lockscreen pin code?

For one ui roms treble support?????

Hi
Can this vendor run Android 12?

[ROM][13][AOSP] ArrowOS v13.1 OFFICIAL [RN8/8T][UNIFIED][OTA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ArrowOS 13.1
Redmi Note 8 (ginkgo) / 8T (willow)​
Code:
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, We will laugh at you.
* It is your fault because you chose to do all the modifications on your device.
* Remember projects like these and the work done on them is a hobby to the
* contributors and the team members, no one is working for you nor is getting paid for it.
* Have some respect for the work done by them since it is done purely on interest or a hobby.
*/
ABOUT
ArrowOS is an Android Open Source Project-based Android mobile operating system started with the aim of keeping things simple, clean, neat, and organized, both for the Android system and users. We added features that will be helpful in the long run, while aiming to deliver smooth performance and longer battery life. We understand the pain of unnecessary and sometimes rarely used mods/features being shipped with custom ROMs nowadays which may end up causing battery drains and/or memory leaks & crashes. This is being strictly avoided on our side keeping everything to a bare minimum, delivering stable performance all the time without destroying the AOSP interface. With users getting more used to tweaks and features, we added just the right features and customisations that will be actually USEFUL at the end of the day.
Website: https://arrowos.net
Telegram: Channel | TG Portal/Links
Github: https://github.com/ArrowOS
Code Review: review.arrowos.net
E-mail: arrowos.contact
PayPal: Donate to us
Blog: blog.arrowos.net
More documentation at (maintainership/contributing): Check this out
WHAT WORKS?
Almost everything (boots, RIL, calls/sms, mobile data, volte/vowifi, wifi, bluetooth, gps, audio, camera, fingerprint, DT2W, wifi display, NFC on willow, etc)
WHAT DOESN'T WORK?
You tell me
Be sure to include logcat: check how to
* MiuiCamera and XiaomiParts included
* QuicksilveR kernel v2.5 (latest) included
* Latest Android 11 firmware required
* Encryption is enabled by default
* SELinux is enforcing and SafetyNet passes
* Ginkgo builds are unified for both ginkgo and willow.
DOWNLOADS
Click here to Download
Tip: Choose Arrow version -> Official, choose build type "GAPPS" or "VANILLA" to download.
INSTRUCTIONS
Clean flash (coming from a different ROM or arrow-11.0/12.0):
Download ROM from below
Reboot to recovery
Wipe data, cache, dalvik cache
Flash latest android-11 firmware (Ginkgo | Willow)
Flash ROM zip
Format data (if encrypted)
Reboot and voila!
To get root access, reboot to recovery after ROM setup and flash Magisk.
Updating to a newer build (dirty flash):
Use the built-in OTA updater, or
Reboot to recovery
Wipe cache and dalvik cache
Flash ROM zip
Flash firmware update if required
Reboot and voila!
Read our blog article/post about:
* HOW-TO report a bug
* GAPPS and VANILLA variants
* Checking build integrity
ROM Source: https://github.com/ArrowOS
Device Sources: https://github.com/ArrowOS-Devices
XDA: DevDB Information
ArrowOS, ROM for the Redmi Note 8
Contributors
Adithya R
Source Code: https://github.com/ArrowOS-Devices/android_kernel_xiaomi_ginkgo
ROM OS Version: Android 13
ROM Kernel: Linux 4.14
Based On: AOSP
Version Information
Status: Stable
Firmware Required: Android 11

Screenshots can be found at our website.
Looking for changelog?
This is an official ROM with automated monthly/weekly OTA updates, so changelogs won't be manually posted in this thread, instead you can find the source changelog at https://arrowos.net/changelog.php and device-specific changelog at https://arrowos.net/download/ginkgo (scroll to the bottom).

Reserved #2

Naice rom .. Good work as always ..

I will install it today. I will write my comments.
PS: Dev, EIS working properly on Mi Camera?
PS2: Yep, EIS working!

Gonna try it soon, nice to know it has been released.

good job!

I set the animations to 0.25x speed and the rom became like a jet. Less specific but wonderfully stable. Battery performance seems to be good too.
After installation I had some trouble first, then most of them were resolved by auto or reboot. Whatever was working "Device Personalization Services" was constantly giving a "stopped" error. I also disabled it and problem solved.

Does this have OTA updates?

Musdi27 said:
... "Device Personalization Services" was constantly giving a "stopped" error. I also disabled it and problem solved.
Click to expand...
Click to collapse
Same problem here. An update from play store fixed this.

The device does not go into sleep mode when Bluetooth is turned on. I checked it with the BetterBatteryStats app.
Battery performance is not what I expected either. It is more better than MIUI 12 of course, but I would expect better battery performance from such a lightweight rom.
Edit: Battery performance is fine actually.

It is confirmed. No deepsleep if BT turned on.

hello, will it happen to add live display feature?

changelog ?
any customisation ?
legacy app scaling enabled ?

Does OTA update works for anyone? I got error in TWRP every single time. Is it a recovery problem?

vojtah1 said:
Does OTA update works for anyone? I got error in TWRP every single time. Is it a recovery problem?
Click to expand...
Click to collapse
same error here... update fails

Latest build. I can't turn on the screen with the power button.

This ROM is incredible... Got friggin nearly 14hours of SOT :victory: Thank you so much dev @Adithya R :good::good::good:

wsoystaac said:
This ROM is incredible... Got friggin nearly 14hours of SOT :victory: Thank you so much dev @Adithya R :good::good::good:
Click to expand...
Click to collapse
Amazing!! How you manage to get 14 SOT?

Are customizations like Quick Settings Header image, etc present in this ROM?

[ROM][12.1][OnePlus 7T Pro 5G McLaren Edition][OFFICIAL] PixelOS [AOSP][STABLE][18/08/2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelOS is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, themed icons, google sans fonts, Monet color based system wide theming, boot animation), a fork of OG Pixel Experience with improvements on the top of it. Huge respect to Pixel Experience team for their work, thanks to them for making this ROM possible.
In short a fully functional Pixel Experience with just the right amount of essentials.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Improvements over PixelExperience​
Device Specific Issues:
* Rare modem bug that renders WiFi to be unusable until reboot on first install.
Requirements
* Minimum Firmware to be installed is OOS 11.0.1.6.
Downloads
Get the latest PixelOS Build for hotdogg Download
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
PixelOS Recovery https://sourceforge.net/projects/pixelos-releases/files/twelve/hotdogg/recovery/
Note: GApps are included, don't flash separately.​
Notes
• Encryption is enabled by default.
• SELinux is enforcing.
• Use the kernel that is included or flash a newer build from here https://t.me/cyberknight_777.
PixelOS Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android12, i.e. you won't be able to decrypt your data.​Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Reboot to recovery
• Format data (if encrypted)
• Flash latest android 11 OOS stable firmware
• Flash ROM zip
• Reboot and voila!
Magisk Flashing Instructions
• Extract boot.img from payload.bin of the ROM zip.
• Install Magisk v24.3 APK.
• Patch boot.img with Magisk manager.
• Flash boot.img in fastbootd with fastboot flash --slot=all boot boot.img
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Reboot and voila!
Join our Telegram Group https://t.me/knightschat
Buy me a Coffee https://donate.cyberknight777.dev
Source Code
PixelOS http://github.com/PixelOS-Pixelish
Device Tree and Vendor Tree https://github.com/PixelOS-Devices
Kernel Tree https://github.com/PixelOS-Devices/kernel_oneplus_sm8150
ROM OS Version: Android 12.1.
ROM Kernel: Linux 4.14.206
Stable Release Date: 18 August 2022
Latest Release Date: 18 August 2022

Screenshots:
https://imgur.com/a/4JSmu5L

Reserved #2

Reserved #3

Thanks! Had a 7T I never used and went to the McLaren XDA forum. Saw nothing helpful there and came across someone using comic sans on cdroid.

Is the download for ROM not ready?

S3MyLove said:
Is the download for ROM not ready?
Click to expand...
Click to collapse
Fixed! Check download option again.

cyberknight777 said:
Fixed! Check download option again.
Click to expand...
Click to collapse
Appreciate the fast fixed can't, wait to try it soon get home. This will work on tmo vers?

S3MyLove said:
Appreciate the fast fixed can't, wait to try it soon get home. This will work on tmo vers?
Click to expand...
Click to collapse
Yes. I personally daily drive a 7T Pro 5G McLaren running PixelOS.

Working great! Thanks for bringing refreshed life back into my McLaren ... No need to upgrade phone any time soon.

S3MyLove said:
Working great! Thanks for bringing refreshed life back into my McLaren ... No need to upgrade phone any time soon.
Click to expand...
Click to collapse
Cheers!

I have a McLaren 7T Pro but it's the non-5G version.
It says: HD1913.
Should I use this one or the other one?

Ginosius said:
I have a McLaren 7T Pro but it's the non-5G version.
It says: HD1913.
Should I use this one or the other one?
Click to expand...
Click to collapse
Flashed the one released for regular 7T Pro

Thank you for the support @cyberknight777

Ginosius said:
I have a McLaren 7T Pro but it's the non-5G version.
It says: HD1913.
Should I use this one or the other one?
Click to expand...
Click to collapse
This rom is for HD1925

I got a notification on the device to update from settings, can I do it from there or dirty flash from download from thread. Changelog (sorrry if I missed it).

S3MyLove said:
I got a notification on the device to update from settings, can I do it from there or dirty flash from download from thread. Changelog (sorrry if I missed it).
Click to expand...
Click to collapse
You can do OTA.

Thanks for making this. I am just moving to this after I broke my guacamole. I assume I can't install ROMs for the non-5G if I want to keep 5G. Glad to see there is still one active ROM for this variant (the separate forum for it seems quite dead).

rpmccormick said:
Thanks for making this. I am just moving to this after I broke my guacamole. I assume I can't install ROMs for the non-5G if I want to keep 5G. Glad to see there is still one active ROM for this variant (the separate forum for it seems quite dead).
Click to expand...
Click to collapse
You should be flashing the build meant for hotdogg on hotdogg.

It is running perfect on my new HD1925 (hotdogg). It is unlocked, rooted, and passes safety net. It is WideVine L3 but I don't really care and have not tried to fix yet.
I really hate A12, but this ROM makes it the best it can be. I will probably stick with it, but might try to go back to A11 with any custom ROM that had the "Select Text" feature in "Recents" like this A12 rom does (any tips for that?)
Thanks so much for the awesome A12 ROM.

[ROM][13.0][OFFICIAL][LA.QSSI.13.0.r1] ReloadedOS [13-11-2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
About Project
ReloadedOS is an Android Custom ROM which is based on CLO. The main aim of this ROM is to bring stock AOSP experience as much as possible while maintaining performance, smoothness and good battery backup. I hope that you'll all love this project, and help us, shape it even more better. Meanwhile, all of our sources are publicly available on our Github. Hope you enjoy your stay and like our work on ReloadedOS. We did add some features to improve the overall experience.
What's CLO?
Code Linaro OSS (CLO) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN, and Linux-MSM. Code Aurora is basically AOSP + Qualcomm specific enhancements and optimization.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
Known issues:
You tell me
Instructions :
Download the latest build
Reboot to recovery and wipe system, data, cache, dalvik
Flash magisk, if you want root access (optional)
Reboot
Downloads :
ReloadedOS: https://reloadedos.org/ginkgo
Source Code :
Kernel: https://github.com/Reloaded-Devices/kernel_xiaomi_ginkgo
Device: https://github.com/Reloaded-Devices/device_xiaomi_ginkgo
Build Info :​
Android OS version: 13
Security patch level: 05-10-2022
Build author/Device Maintainer: @aryaman895
FAQ
Why is the security patch older than the latest AOSP patch?
CLO focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on CLO patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like LineageOS), if you want latest Qualcomm optimizations for our hardware as well as fixes, go with CLO, it's as simple as that.

Code:
Reloaded OS [LA.QSSI.13.0.r1]
Build - 13-11-2022
Changelog :-
* Initial A13 Build.
* 48mp works in MiuiCamera
* NFC Works for Willow Users.
Note :-
* Gapps Build.
* Flash latest A11 Firmware
Credits :-
* Thanks @ghostrider_reborn my dude for all his love & support to Reloaded OS.
* Also big thanks @madmax for everything he did for Reloaded OS
* Thanks to @ghostrider_reborn @Pascaoto for trees
* My lovely testers @xterkrs @purplr1 @bmark240 @henry_markle @mikefrag for testing it
Download Now​

Reserved

Reserved

I installed this just for the 48 mp cam and "it just works"

Using it for 5 days no issues yet. Will update if I find any. Cheers dev.
Update : nothing major per se just some overlapped ui elements

<Moderator Note>
Closed thread. @aryaman895 please see my PM and use the Report button on the OP to let us know if you're prepared to fix the thread, so we can unlock it.
Thank you.
Sib64 - Moderator

<Moderator Note>
Hi @aryaman895
Thread unlocked for update : Link of Kernel Source need to be indicated
Regards
Sib64 - Moderator

This is the best Gingko rom because the 48MP camera works
It also has a lot of good customizations and features.
Thanks Dev

Impressive Rom, batterie lasts actually very long. No problems at all.
edit: active support of the rom is missing

any chance to get no gapps build?

The camera works perfectly ! It's first time in so many roms !
Battery, VOIP calls, stability, all without problems.
I would like to install pixel launcher as default, can anyone help ?

+1 for no gapps build.

+2 for no gapps build.

Jacobo666 said:
+2 for no gapps build.
Click to expand...
Click to collapse
+3

Does this rom works on willow too?
Autoanswer: yes.
I flashed this rom replacing xiaomi.eu because development is dead for this device and so far so good. Everything works. My wife love it.

I haven't found any bug yet, everything seems to be working fine, and smooth too!
Thank you, I think I'll keep using this one, looking forward to future updates

muil said:
Does this rom works on willow too?
Autoanswer: yes.
I flashed this rom replacing xiaomi.eu because development is dead for this device and so far so good. Everything works. My wife love it.
Click to expand...
Click to collapse
Development on willow doesn't dead (yet), it follows ginkgo. Only few roms that have NFC problem on willow. I own willow myself. Other than that, anything that works on ginkgo, should work on ginkgo too, and vice versa.
I'm not too fancy of reloaded, but it's just my personal preference, since last time it was out on a10, only few builds had been released. You are welcome to use anything you like.

x3r0.13urn said:
Development on willow doesn't dead (yet), ...
Click to expand...
Click to collapse
Excuse my english, I was referring to xiaomi.eu project only, it's a dead end for this device. Of course, there are development in other roms like this one.

error not saving pictures to sd card even though i have it enabled

[ROM][13][UNOFFICIAL] Spark OS 13.4 [FP3][AOSP][ANDROID 13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance.
In short a fully functional operating system as stable and customizable as it should be.
UNOFFICIAL Spark OS
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
No APN selected by default on first boot, select one manually and reboot.
Enabling and disabling the access point causes the wifi to stop until the next restart.
Requirements
Minimum firmware : FP3-REL-8901.4.A.0010
Downloads (Mega)
ROM WITHOUT GAPPS
ROM WITHOUT GAPPS Checksum
ROM WITH GAPPS
ROM WITH GAPPS Checksum
Magisk (optional) https://github.com/topjohnwu/Magisk/releases
Note: On -gapps builds GApps are included, don't flash separately.​
Notes
Encryption is enabled by default
SELinux is enforcing
The provided Recovery is recommended if you want to stay encrypted, no custom recovery supports encryption on Android13, i.e. you won't be able to decrypt your data.​
Flashing Instructions
Clean flash (coming from a different ROM):
• Download ROM from the link above
• Download Magisk v23.0 or newer (optionally)
• Reboot to recovery
• Format data (if encrypted)
• Wipe cache, dalvik, data
• Flash latest android 11 global stable firmware (link above)
• Flash ROM zip
• Reboot and voila!
• To get root access, reboot to recovery after ROM setup and flash magisk.
Updating to a newer build (dirty flash):
• Flash ROM zip and magisk (optional)
• Wipe cache and dalvik (optional, recommended)
• Reboot and voila!
Source Code
Spark OS Sources
Device Specific Tree
Kernel
Vendor
Modified Spark Vendor
ROM OS Version: Android 13.4
ROM Kernel: Linux 4.9.x
Contributors
Lowxorx Device tree / Spark vendor and almost everything
bharath_58 Kernel, fw/b
Screenshots
​

EDIT :
Bluetooth problem fixed.
Fingerprint problem fixed.
Wifi hotspot problem will be fixed soon....

Thanks for keeping this device alive! I hope there will be a dedicated forum for the FP3 soon

Lowxorx said:
Thanks for keeping this device alive! I hope there will be a dedicated forum for the FP3 soon
Click to expand...
Click to collapse
I hope it too !

Lowxorx said:
dedicated forum for the FP3 soon
Click to expand...
Click to collapse
Yeah, it's about time. Maybe some Santa/Mod sees this...

doremus0 said:
I'm working on the bluetooth problem i will update this post when it will be fixed.
Click to expand...
Click to collapse
Hey there.
Nice to see a new contribution to FP3, that too on XDA.
So, were you able to address this Bluetooth issue? If you need any help with this, don't hesitate to contact me.
It will take another 2 weeks before I make the A13 compatible sources public for LineageOS 20. But, we can fix it up for this before that.
Congratulations once again.
And, kernel version should be 4.9 instead of 4.14

Hi @bharath_58 !
I'm glad to see you there !
I fixed the bluetooth problem by updating the device tree config according to the modifications done on other spark device tree (thanks to Lowxorx for helping me).
Bluetooth is working now !

doremus0 said:
Hi @bharath_58 !
I'm glad to see you there !
I fixed the bluetooth problem by updating the device tree config according to the modifications done on other spark device tree (thanks to Lowxorx for helping me).
Bluetooth is working now !
Click to expand...
Click to collapse
Ah, that's nice to hear. Could you update your tree so that I can have a look?
Next, do you plan to make this OFFICIAL by any chance?
Lowxorx said:
Thanks for keeping this device alive! I hope there will be a dedicated forum for the FP3 soon
Click to expand...
Click to collapse
This would be slightly complicated because we do not have many users here + we do not have lot of work here on XDA. So, we can't even approach for a dedicated forum.

I updated the device tree with bluetooth related commits.
I spotted one last problem with fingerprints, and when it will be fixed i will apply as maintener on Spark Os team and try to make this official.
For this fingerprint problem i think it's not a big deal but i can't figure out what's the point.
If i set my fingerprint it works as long as i don't restart my phone, i can lock and unlock my phone. with it
After the first reboot my fingerprint is no longer recognized, but is present in the security settings.
After the second reboot the fingerprint disapear from the settings.
Does this tell you something @bharath_58 ?
I looked on the log at restart but i didn't spot anything wrng related to fingerprint, i think it is just a settings problem on the device tree because without reboot it works.

Version 13.4 released with the fingerprint problem fixed.

Lowxorx said:
Thanks for keeping this device alive! I hope there will be a dedicated forum for the FP3 soon
Click to expand...
Click to collapse
I have this rom on F3 and the fingerprint reader does not work

Wifi hotspot will be fixed soon and i will update the build.