Related
I have a Tilt 2 from AT&T running Windows Mobile 6.5. I got it in October.
Sometimes my phone's clock will get behind, displaying a time that is an hour or more off. This morning, for example, I had the phone's alarm set for 9am. I woke up at 10am. When I looked at my phone, the clock displayed 8:30am. I power cycled it and it displayed the correct time.
My apartment has lousy cell reception, and I often have no signal at all when inside. Does this phone/OS rely on the cellular network to know what time it is?
Has anyone experienced similar behavior? Does anyone know if there is a fix for this?
I don't think I can trust my phone to wake me up until I find a way to fix this.
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
The phone does rely on the network to keep time updated.
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
orb3000 said:
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
Click to expand...
Click to collapse
I don't sync my phone with PC, and I don't have any push notifications activated.
The phone does rely on the network to keep time updated.
prjkthack said:
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
Click to expand...
Click to collapse
Turned off auto-updates as you suggested. Now we wait and see. Thanks for the suggestion.
__________________
Clock falls behind, can't find the automatic settings
For the second time now, I experienced the same problem, where my clock on the Tilt 2 was behind. This time it was during the night and it was off by about 3 hours, and even missed the date change. The first time it was something around an hour. I don't know what's worse, because with the long time you know it's wrong when it's light outside and the time says it shouldn't.
The phone wasn't hot either, so, as far as I know it wasn't busy doing something else. The cell reception was fine here, and I was not syncing. To correct the problem, I looked for the setting to automatically set the time, based on the network. It's not off by precisely one or more hours, so it doesn't look like a timezone itself. Note that I have TouchFlo disabled, and I use the Windows 6.5 Today screen, so it might be a bit different. I looked through several settings beside the clock, but can't find it. Unless it's one and the same of course.
Any idea what could be causing this? Thanks for the powercycle tip.
I disabled what prjkthack said, I needed also to disable the sync option from Sense. This works for 'My Location' but screws other world clocks. Looks like a sort of 'base' clock is set wrong...
i have this issue with the tp and the hd2 both with energyrom.
att tilt 2 clock and date off when updated to new stock rom
hi iam having the same problems with my time and date being wrong everytime i softreset. the minutes usually always seem to be right but a couple hours off always and then you have to go in and manually set the clock. i also had to set the date when i softreset. i tried the my location button, didnt work. also called htc and talked to someone who said the time did have to be set manually, but i really dont think he knew what he was talking about. and it should have exact time from network and sat/gpr connections or even wifi? stange
Interesting. It appears that we might be fighting two different problems then. One that is a timezone offset (i.e. the minutes are the same, but the hours are off), and a full stall of the clock (with the time being off a random amount of hours and minutes).
clock advances one hour every night
Hi,
I have a similar problem with my clock: every night the clock advances one hour. If I do not correct the time, it will be two hours in advance after two nights.
This is since the night, where the daylight saving time ended.
Can anyone help?
I've had my phone over 6 months and two days ago it started having issues with keeping the correct time...
Odd indeed.
Maybe it's ATT causing the problem?
Go into Settings/Personal/Phone, then click the GSM/UTMS services tab. Click on "Time Synchronization", then Get Settings. If the "automatic change time zone & clock" box is checked, uncheck it.
That turns off the synchronization of the Tilt2's clock with the cell network, so that you can synch the time yourself. There are some third-party programs that will let you synch off a NTP server or the phone's GPS receiver -- I use Julien Schapman's Time Synchronizer.
It's not a att thing. I have the same problem since last week. I'm in Argentina and a couple of years ago we had daylight saving time. And the last year we had it we must change it on december 27th (the day it started to change in my phone in 2010. Now everytime i activesync with my pc it advaces 1 hour.
It's really annoying. And fyi my setting have disable automatic change timezone and clock!!
I don't know what to do
Cheers and happy new year
Ignacio
I'm in Argentina too, and having the same problem as Ignacio. The only thing I can add is that my Tilt2 started having this problem right after returning from Uruguay, which by the way, they are one hour ahead of us. My girlfriend has the same phone but she did not activate it while in Uruguay and she is not having this problem.
I really doubt it is just a Sync problem. I've tried every possible configuration and nothing. I wish it would be that simple.
We need a good chef for this one...
Regards
Fito
Offical fix: http://www.htc.com/europe/SupportViewNews.aspx?dl_id=1070&news_id=851
Or just install a ROM that doesn't have this issue (included this fix).
Since i upgraded my s7 to Nougat, my Smartwatch 3 has failed to stay connected to the phone. Most of the time it refuses to connect at all.
Ive googled for days now, trying all of the usual stuff including clearing the bluetooth cache and wiping the system cache, unpairing the watch, safe mode, forgetting the watch and repairing, removing android wear.
The setup starts working and then during the sync stage, i start getting the bluetooth share has failed message several times although most apps seem to sync eg watchmaker pro and strava.
My question is should the Smartwatch 3 still work correctly with my phone even though the phone is on Android 7.0 and the phone is on 6.0?
Thanks
Andy
My SW3 works great with my HTC 10 running Nougat.
Have you tried doing a factory reset on the watch?
That was going to be my last resort!
Think I may be there though
Thanks,
Andy
Just completed a full reset. Paired first time but crashed several times with bluetooth share has failed.
Failed to complete and no longer connects
I'm also on 7.0 and no problem at all. Maybe is something wrong with your BT from S7, unfortunately I have to tell you to try try factory on the phone, if you can't find out. Samsung for me have strange way of using there BT connections maybe this is why.
Hope I'm not starting any flame but.... that's why I'm on HTC (and not only), Samsung (S4 and S5) phone several times have blocked my car BT system...
Sent from my HTC 10 using Tapatalk
Thanks for the feedback. I have done a factory reset and it made no difference, but maybe it is a Samsung issue as nobody with an S7 has indicated they are using an SW3 with nougat.
burleanu said:
I'm also on 7.0 and no problem at all. Maybe is something wrong with your BT from S7, unfortunately I have to tell you to try try factory on the phone, if you can't find out. Samsung for me have strange way of using there BT connections maybe this is why.
Hope I'm not starting any flame but.... that's why I'm on HTC (and not only), Samsung (S4 and S5) phone several times have blocked my car BT system...
Sent from my HTC 10 using Tapatalk
Click to expand...
Click to collapse
I'm having same issues. Updated S7 edge to Nougat last week and everything running fine until SW3 ceased connecting today. Tried everything other than factory reset on phone and cannot get connection to SW3.
Mine has started working after a month of failing.
It's been connected for a couple of days without any disconnections.
The latest attempt was no different to any others.....
I switched off the watch, wiped the system cache, restarted the phone and watch and lt connected.
I left it alone as apps started to sync and there were some bluetooth share has stopped messages but everything works!
try this:
https://forum.xda-developers.com/pixel-xl/help/bluetooth-off-t3572982
andyshandyman said:
Since i upgraded my s7 to Nougat, my Smartwatch 3 has failed to stay connected to the phone. Most of the time it refuses to connect at all.
Ive googled for days now, trying all of the usual stuff including clearing the bluetooth cache and wiping the system cache, unpairing the watch, safe mode, forgetting the watch and repairing, removing android wear.
The setup starts working and then during the sync stage, i start getting the bluetooth share has failed message several times although most apps seem to sync eg watchmaker pro and strava.
My question is should the Smartwatch 3 still work correctly with my phone even though the phone is on Android 7.0 and the phone is on 6.0?
Thanks
Andy
Click to expand...
Click to collapse
If you use in the phone the option "deep kill all apps" in recen menus... you will have sync problem... It happend me with my op3...
I have similar problem with my S7. It works fine with bt connection as long as i connect the watch over wifi. Then no more bt connection is established, only wifi. Turning off wifi makes the watch permanently offline.
Very annoying as my watch can't sync when outside my wifi range.
Any solution so far?
Recently purchased a new, unlocked S8+ and got a new SIM from Verizon. This was approximately 2 weeks ago. Zero problems up until this week. I have been on 4 flights this week - before each flight, the phone works great. When I land on the other end, Verizon LTE pops right up, varying numbers of bars as one would expect depending on arrival airport, just like it would normally when I have service and can do everything. However, nothing. No texts, no calling, no data. Tried toggling various things, resetting, nothing for a hour after that, all the while I've got 3-4-5 bars and I can see the data arrows lighting up like there is upload/download transfer.
Finally, I tried "reset network settings" as a last resort and immediately my phone works like a charm. It has happened another 3 times since - every time I have flown, with the exact same results.
All domestic flights. While I'm not a guru, I'm not a complete halfwit either - this is my 4th galaxy and it's definitely not something I'm doing or have ever had problems with before. I fly all the time and never a problem like this until this week. Checked APN, it's right. Checked software update - have most recent.
Any ideas? I'm desperate. Have searched literally everything I can think of and no one else seems to be reporting this problem, not to mention it's difficult to describe in a Google search. About at my wit's end having to re-enter wifi and passwords every day, relearn Bluetooth devices. Theres no other way to truly reset the mobile data settings and get my phone to work that I've discovered. Please, please help.
Eject SD card and remove sim, wait a min, reinsert cards. While the phone is on. Should reset just ur sim settings. Maybe
Hey folks!
I just picked up the BS3 after being generally disappointed for most of a year with the Razer Phone 2. I got the EU version (I guess?) and have been having general issues with the wireless.
Periodically, almost the entire suite of wireless connectivity just drops. My WearOS watch (Ticwatch Pro 2020) will disconnect, and the custom watchface I use via Watchfaces disappears. Wifi usually keeps working so I may not notice the drop right away, but if I'm on my phone's cellular connection, nothing goes through even though it shows signal and LTE. In my car on my way home from work this morning I was on the phone with my captain, and the bluetooth connection to my car started cutting in and out, to the point that I had to turn bluetooth off to finish the call. There was no issue up to that point, while driving and listening to Audible.
I am suspecting/hoping it was user error in setting the device up. I backed up my RP2 to Google Drive, because I didn't want to lose my apps/data (I was mostly hoping my Swype settings and game logins would transfer over, since Swype died and I'm being a luddite, and the games require the hassle of 'transfer IDs') and have my text messages transfer over easily. I think it also possibly transferred the core device stuff like cellular and bluetooth settings as well, though am not sure.
Turning airplane mode on and off seems to 'reset' things and it'll reconnect to stuff, for a while again at least. I noticed I am somehow still getting at least some push notifications on my watch even though it shows as disconnected. I am a firefighter, on AT&T's Firstnet, so am also not sure if maybe the Firstnet bands might be being finnicky with the BS3.
Thanks ahead of time for any help and suggestions!
ETA: I also get the "Xiaomi SIM activation failed" alert every time I restart the phone, and sometimes after reboot the keyboard doesn't load. ? I get the feeling ill need to reflash again, but knowing where I went wrong first would help! Also curious if there is a stock Android ROM because this JoyUI seems a hassle, and I just don't want all the Xiaomi stuff.
TL;DR
Moto Z2 Play - XT1710-07
The phone recognizes the SIM card but there is no signal (no service). Tried several things, including flashing a custom ROM. I'm considering buying a new motherboard and changing it myself, but first want to know if anyone knows more about this issue or has an idea/suggestion.
Edit: As an added bonus, something that only now I realized. Now when I charge it, it gets EXTREMELY hot. Like I-can't-even-use-it hot. I used to use the phone while charging all the time, but now I can't even hold it. Seems like the problem is when it tries go past 80% charge. It gets super slow, keeps trying and gets hot. Now I don't know if it's a software problem caused by the various flashings or if it's something that would remain even after swapping the motherboard.
Edit 2: I did a full discharge of the phone and recharged it while turned off. It seems to have normalized the battery problem
Edit 3: RIP. I tried to remove the screen before deciding about buying a new board. In the process, I ended up tearing the digitizer flat cable apart. Now I don't think it's worth it buying both a new screen and a motherboard.
The full story and things I've tried
My phone was working all nice and dandy until it stopped having signal/service. Wifi works normally, but anything related to the SIM card doesn't, like phone calls or mobile data.
A list of things I've tried somewhat in order (both of time and of complexity):
* My SIM in another phone: it works normally, so the problem is not the SIM itself
* Another SIM in my phone: it doesn't work, so the problem is definitely the phone
* Using the second SIM slot
* Changing "Preferred Network Type" between the available ones (4G, 3G, 2G, including Enhanced 4G LTE Mode on and off): this one and the next two items don't really make sense to me, since these options seem to be only related to mobile data (4G/3G internet) connection, not to phone calls which is also not working, but I tried them anyway
* Manually selecting the network: Errors with "Selected network unavailable" and, after trying to register for a while, toasts another error saying "Can't connect to the network, try again later"
* Manually selecting the APN: Tried both selecting between the two options available and manually adding an APN by googling the correct info for my carrier
* Simply booting into fastboot and restarting bootloader: a video on YouTube claimed that it was a temporary solution and that I'd need to do it every time it lost signal. But it didn't even work the first time
* Disabling CQATest and then restarting bootloader (and also clearing its data/cache and removing its permissions): a lot of videos on YouTube claimed this was a solution, including for other Motorola phones. Apparently CQATest prevents the phone from working properly in some scenarios. But I think only when you de-google your phone? Not sure. All I know is that it didn't work either
* Using the phone connected to the wall charger: I think this was another YouTube suggestion, and it actually worked for a few minutes. But I guess it was just a coincidence, as it never worked again
Now for some more... "forceful" attempts:
* Factory Reset: Not sure where I saw this suggestion, but it was pretty much the next logical step. Gathered courage, backed up all my data, etc, aaand... nothing again
* Flashing another ROM: Guess it was here at XDA that I read that it was a problem with Motorola's stock ROM. That, paired with my belief that it could still be related to CQATest being installed, I again gathered more courage to flash a custom ROM. I chose LineageOS and found out that it was no longer supported, but decided to install the last official release. I also read that the problem was the Pie modem firmware, so it all seemed to be going fine since the last official release is Oreo 8.1. I flashed it and BAM it worked! ... for a few minutes and never again. I messed around with LineageOS, tried some of the previous things again, but nothing.
Then, I tried to restore my TWRP backup but it didn't work. So I searched a bit more and downloaded the Stock Pie ROM, flashed it, and closed the bootloader. And then I realized the restore probably didn't work since my backup was made using Pie and my phone was on Oreo. Maybe some files/partitions were missing? Also, when I was creating my TWRP backups, I tried creating a full system image backup but it kept erroring. Only later I realized the problem was that the USB Drive was FAT32 and the full system image was bigger than 4GB. Oh, well, now I know.
So now that I'm with my phone pretty much back on square one, I take it to an authorized repair shop. The clerk said that it was a common problem, and that sometimes it could be solved "by software" and that they'd try that. The other option was to change the whole motherboard, which they didn't do because it was "not worth it" and "almost the full price of a new phone". After two days, my suspicions were confirmed: they didn't fix it with their "by software" attempt. At least I didn't have to pay anything.
When I got the phone back, I put the SIM in again and it showed the icon as if there was signal. But when I tried to call someone, the signal disappeared again. I tried searching a bit more, went through all pages of Q&A here at XDA forums and there were like 3 posts regarding loss of signal. All without any response. On YouTube, I found some videos offering a suspicious .bat file. Upon inspection, it merely erased the modemst1 and modemst2 partitions and then wiped user data and cache. I tried it, nothing to lose. Also didn't work.
Now I'm contemplating a few options:
By watching some disassembly videos, I saw that, when opened, the phone has some parts that act like antennas. I thought that maybe those were not properly connected to the board? Maybe they got dislodged during a fall? Seems unlikely tho, since they are screwed in. I searched for a new motherboard to buy and it's a reasonable price. But I'm afraid it'll have the same problem (or develop it in a short time) since I can't find anywhere what the true cause of the problem is.
Another option is to just give up, buy a new phone and use this one as if it was a "small tablet" lol
So, do you guys have any other suggestions or ideas as to what might be the problem? Maybe a tip like "solder a wire to this spot to create a make-do antenna"? I don't really know where else to search.
If not, thanks anyway for those who read it all