Related
Here's the error I get:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks guys!
The phone is an I747 from AT&T.
I'm trying to flash the Rogers ROM on it because I am on a Rogers plan and the AT&T version is full of bloatware.
bump
Try downloading the file again. I would also try another usb slot or even pc
Sent from my SAMSUNG-SGH-I747M
mymusicathome said:
Try downloading the file again. I would also try another usb slot or even pc
Sent from my SAMSUNG-SGH-I747M
Click to expand...
Click to collapse
Just tried it again. It keeps failing at sbl2.mbn it seems.
If it means anything, I just noticed in download mode it says
Code:
SECURE CHECK FAIL : sbl2
SevKempf said:
Here's the error I get:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks guys!
The phone is an I747 from AT&T.
I'm trying to flash the Rogers ROM on it because I am on a Rogers plan and the AT&T version is full of bloatware.
Click to expand...
Click to collapse
I may be wrong but I don't think you can flash the stock ATT ROM on a Rogers device and vice versa. Also, the ATT ROM contains a different modem that may not work well for us on Rogers. Your best bet is to keep the ATT ROM and freeze/delete the bloatware using Titanium Backup Pro and flash the Rogers modem.
Or run a custom ROM.
Tony_YYZ said:
I may be wrong but I don't think you can flash the stock ATT ROM on a Rogers device and vice versa. Also, the ATT ROM contains a different modem that may not work well for us on Rogers. Your best bet is to keep the ATT ROM and freeze/delete the bloatware using Titanium Backup Pro and flash the Rogers modem.
Or run a custom ROM.
Click to expand...
Click to collapse
Yeah, I'm currently running CM10 but I find it has WAY too many bugs for me to use it, things constantly crashing, graphical glitches. The LED doesn't light up for anything except charging.
I originally did use TiBa to delete the bloat, no problem. Except AT&T replaces the Address Book with their own version the "AT&T Address Book" which syncs with some AT&T server every time I open it, super annoying.
Then why not try using one of the custom ICS/JB stock-based ROMs? As he said, i'm pretty sure it's impossible to flash a Rogers ROM on an AT&T device.
And.... which build of CM10 are you using? You could always try Task & Ktoonsez CM10-based ROM. Never experience a graphical glitch (though, i never did even on older CM10 builds, either), hardly ever have anything crash..... and as far as i'm aware, even in stock CM10, you actually have to go into the settings or find an app and manually set up the notification LED colors and what they blink for.
elementaldragon said:
Then why not try using one of the custom ICS/JB stock-based ROMs? As he said, i'm pretty sure it's impossible to flash a Rogers ROM on an AT&T device.
Click to expand...
Click to collapse
Where can I find one of these ROMs? I've searched for them but I haven't found anything. I asked someone and they suggested an AOSP, but I wasn't able to find any, so I used a AOKP ROM and when I booted the phone all that displayed was some 8bit looking gradient from Yellow to Purple, got worried and rebooted my phone and reinstalled Cyanogenmod.
elementaldragon said:
And.... which build of CM10 are you using? You could always try Task & Ktoonsez CM10-based ROM. Never experience a graphical glitch (though, i never did even on older CM10 builds, either), hardly ever have anything crash..... and as far as i'm aware, even in stock CM10, you actually have to go into the settings or find an app and manually set up the notification LED colors and what they blink for.
Click to expand...
Click to collapse
I installed Cyanogenmod from the ROM Manager app. This ROM, specifically.
Also, when I install a ROM, can I do it from CWM? Or do I need to install using Odin?
SevKempf said:
Where can I find one of these ROMs? I've searched for them but I haven't found anything. I asked someone and they suggested an AOSP, but I wasn't able to find any, so I used a AOKP ROM and when I booted the phone all that displayed was some 8bit looking gradient from Yellow to Purple, got worried and rebooted my phone and reinstalled Cyanogenmod.
I installed Cyanogenmod from the ROM Manager app. This ROM, specifically.
Also, when I install a ROM, can I do it from CWM? Or do I need to install using Odin?
Click to expand...
Click to collapse
That link you provided shows that it points to a Galaxy S2 ROM in the url. The link itself didn't work though when i clicked on it.
Try this ROM: http://forum.xda-developers.com/showthread.php?t=1766684
I wonder if the problem you're having is related to the build.prop
ATT have a device model name d2att while the Canadian variants have device model name d2can.
Search the forums add I think I've read something about that.
Also, even though you want to flash a Rogers Rom, make sure you use an ATT modem.
Sent from my SGH-I747M using xda premium
what can be error sbl2.mbn than use Odin ?
i try use other usb port in notebook, any versions Odin (v. 1.85; 3.4; 3.7), reinstalling the USB drivers and use stock SGS3 USB but problem steel be
Thanks
Definitely try out Task650's AOKP rom, Its very stable and has very few (if any) bugs.
nate_benji said:
Definitely try out Task650's AOKP rom, Its very stable and has very few (if any) bugs.
Click to expand...
Click to collapse
i'm use Task650's AOKP rom at that moment, but they are not support extSdCard 64Gb and then i'm try upload stok JB 4.1.1. from Odin i recive a fail massage i think truble in sbl2.mbn
Code:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sbl2.mbn
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tybalt said:
Also, even though you want to flash a Rogers Rom, make sure you use an ATT modem.
Click to expand...
Click to collapse
Are you suggesting that I download both stock ROMs, extract them, then do a simultaneous mix and match of the parts in ODIN?
I have the AT&T i747 but want to have the reduced Rogers bloatware.
Anonymously_Unknown said:
Are you suggesting that I download both stock ROMs, extract them, then do a simultaneous mix and match of the parts in ODIN?
I have the AT&T i747 but want to have the reduced Rogers bloatware.
Click to expand...
Click to collapse
No, just get a cwm recovery and flash a AT&T modem.
Also, there's a unbloated AT&T stock ROM, why go for Rogers?
Go to twrp or cwm website and get the recovery for d2can instead of d2att. I'm not sure but it could be the source of your issue.
Sent from my SGH-I747 using xda app-developers app
Im having similar problem and need help too
I also have this secure check fail:sbl2 problem, but what I did was diffident. installed ParanoidKangDroid custom rom and then i realized that i use allshare play from stock rom pretty much so i decided to put back to stock my GS3. I used odin 3.0.7 to do that. I download the original stock rom from sammobile exactly the puerto rico version (were i live), but as i said it gives me the sbl2 fail problem.
---------- Post added at 05:19 AM ---------- Previous post was at 05:07 AM ----------
As you see Im a noobie here and I have another question. I like ParanoidKangDroid in my device but cant install allshare play so th question is: If i flash the [KERNEL][AT&T][AOSP/Touchwiz][JELLYBEAN][4/6/2013] KT747 - LJ7 - KTweaker, Can I install allshare play then? if yes what do i need to install it. Is there any other 4.2.2 rom that i can use the kernel mentioned above? or is there any rom which has touchwiz integrated?
sycol65 said:
but as i said it gives me the sbl2 fail problem.
Click to expand...
Click to collapse
I had downloaded the one from the stock firmware page and flashed it with the custom recovery to eliminate that issue. What you are experiencing is a bootloader mismatch.
Can you explain me the correct entire process to do that?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
slb2.mbn error, fail
SevKempf said:
Here's the error I get:
Code:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks guys!
The phone is an I747 from AT&T.
I'm trying to flash the Rogers ROM on it because I am on a Rogers plan and the AT&T version is full of bloatware.
Click to expand...
Click to collapse
This error is caused because a BAD USB CABLE. Please, use an original Samsung GGalaxy Cable. I had that problem with my GT-I9195. Fortunatelly it's working again.
The symptom was that i couldn't copy files from my computer to my smartphone.
Hello,
Device : Samsung Galaxy Note 2 (GT-N7100)
I am a new Android user and I tried installing a Custom ROM (KitKat 4.4) on my device which worked well.
I used TWRP to boot from in order to install it. Later I tried another ROM which seems to have bricked the device.
Now when I start my device, it doesn't progress pass the Boot Logo.
Is there a way to restore the device ? Any method using Odin ?
I don't have to worry about losing data because there's nothing to back up.
I would appreciate it if someone could point me a method to install a reliable (Stock) Jelly Bean 4.3 firmware.
I do not use it for making calls - only as a WiFi device. Would it be possible to use the recently released original 4.3 firmware
available for India, Hong Kong, China ?
You can get your stock rom from sammobile and flash with odin. You can also try booting to recovery factory resetting/flashing a different custom rom. I've had my share off boot loops
Sent from my GT-N7105 using XDA Premium 4 mobile app
Not Successful with Odin
Hello,
I tried flashing a Stock firmware from SamMobile and I get errors on Odin.
<OSM> Please wait..
<OSM> N7100ZCUEMK3_N7100CHNEMK3_N7100ZCUEMK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
What could I have done wrong ?
andy_central said:
Hello,
Device : Samsung Galaxy Note 2 (GT-N7100)
I am a new Android user and I tried installing a Custom ROM (KitKat 4.4) on my device which worked well.
I used TWRP to boot from in order to install it. Later I tried another ROM which seems to have bricked the device.
Now when I start my device, it doesn't progress pass the Boot Logo.
Is there a way to restore the device ? Any method using Odin ?
I don't have to worry about losing data because there's nothing to back up.
I would appreciate it if someone could point me a method to install a reliable (Stock) Jelly Bean 4.3 firmware.
I do not use it for making calls - only as a WiFi device. Would it be possible to use the recently released original 4.3 firmware
available for India, Hong Kong, China ?
Click to expand...
Click to collapse
Which rom?
Once I saw there is a FACTORY rom for N7100. Give it a try.
Here it is http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
DOWNLOAD_N7100XXDLJ2_OXA_FACTORY
These firmware is made for emergency recovery device to factory condition
Firmware consists of four parts, plus pit
Attention! All user data will be deleted during flash the firmware, including internal sdcard
After flash you will have clean device (factory condition) CSC - XEF default
Can flash with PIT - Included in the firmware (The optional - required if damaged partition PIT)
Click to expand...
Click to collapse
Thanks a lot for the above information.
I'll try it out and update results.
[email protected] said:
Which rom?
Once I saw there is a FACTORY rom for N7100. Give it a try.
Here it is http://forum.xda-developers.com/showpost.php?p=32273406&postcount=5
Click to expand...
Click to collapse
Thanks ! I've got it working now.
Hi everyone. I'm having some troubles with a galaxy note 2. I have one but is with the firmware of China with the JB 4.3.
I've being trying to flash with the firmware of europe, JB 4.1 with odin3 but i can't. It always give an error on sboot.bin.
I've downloaded the stock firmware from sammobile.com.
Tried in different computers and differents USB cables.
Also tried to install two differents USB drivers from differents sources.
Weird thing, i cant root my device by flashing by odin.
Can anyone give me an help?
This is my device:
Android Version 4.3
Baseband Version N7100ZCUEMK3
Build Number JSS15J.N7100ZCUEMK3
This is the error on Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100TPHDMF1_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
New Droid said:
Hi everyone. I'm having some troubles with a galaxy note 2. I have one but is with the firmware of China with the JB 4.3.
I've being trying to flash with the firmware of europe, JB 4.1 with odin3 but i can't. It always give an error on sboot.bin.
I've downloaded the stock firmware from sammobile.com.
Tried in different computers and differents USB cables.
Also tried to install two differents USB drivers from differents sources.
Weird thing, i cant root my device by flashing by odin.
Can anyone give me an help?
Click to expand...
Click to collapse
I believe that if it is official 4.3 you cannot downgrade.
Is it a clone?
Sent from my GT-N7105 using xda app-developers app
thedadio said:
Is it a clone?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
If it is a clone is very well disguised, and it have the same SoC (CPU, RAM, Internal Memory, etc)
And it is impossoble to downgrade from 4.3?
New Droid said:
If it is a clone is very well disguised, and it have the same SoC (CPU, RAM, Internal Memory, etc)
And it is impossoble to downgrade from 4.3?
Click to expand...
Click to collapse
You can downgrade from 4.3 but you cannot downgrade the bootloader, that will be stuck
tonylee000 said:
You can downgrade from 4.3 but you cannot downgrade the bootloader, that will be stuck
Click to expand...
Click to collapse
Can you guide me to a post to try please.
I've tried a lot of post but it always fails.
This is my device:
Android Version 4.3
Baseband Version N7100ZCUEMK3
Build Number JSS15J.N7100ZCUEMK3
This is the error on Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100TPHDMF1_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Update on first topic
New Droid said:
Can you guide me to a post to try please.
I've tried a lot of post but it always fails.
This is my device:
Android Version 4.3
Baseband Version N7100ZCUEMK3
Build Number JSS15J.N7100ZCUEMK3
This is the error on Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100TPHDMF1_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Update on first topic
Click to expand...
Click to collapse
Ah the official stock images will have a bootloader bundled in it. So that maybe where its going wrong. If you install a custom recovery and put a custom rom (arhd19 or wanamlite3.9 are both android 412) that might be the easiest but I would only guess that yhey would work with the mk3 bootloader but it would probably burn the efuse voiding warranty.
....
flash dr ketans knox free bootloader from one of his threads its a downgradable 4.3 bootloader
tonylee000 said:
Ah the official stock images will have a bootloader bundled in it. So that maybe where its going wrong. If you install a custom recovery and put a custom rom (arhd19 or wanamlite3.9 are both android 412) that might be the easiest but I would only guess that yhey would work with the mk3 bootloader but it would probably burn the efuse voiding warranty.
Click to expand...
Click to collapse
I've installed the latest version of CWM Recovery Touch v6.0.4.1 and try to flash the CyanogenMod 10.1.3 to see if it woks.
The_Flashaholic said:
flash dr ketans knox free bootloader from one of his threads its a downgradable 4.3 bootloader
Click to expand...
Click to collapse
Right now I'm on my mobile. Can you send me the link to one post with that please. Thanks
Enviado do meu U9200 através de Tapatalk
The_Flashaholic said:
flash dr ketans knox free bootloader from one of his threads its a downgradable 4.3 bootloader
Click to expand...
Click to collapse
Can the mk3 bootloader be downgraded? I wss under the impression that once upgraded to a mk bootloader you were stuck with it as theyre not downgradable
New Droid said:
Hi everyone. I'm having some troubles with a galaxy note 2. I have one but is with the firmware of China with the JB 4.3.
I've being trying to flash with the firmware of europe, JB 4.1 with odin3 but i can't. It always give an error on sboot.bin.
I've downloaded the stock firmware from sammobile.com.
Tried in different computers and differents USB cables.
Also tried to install two differents USB drivers from differents sources.
Weird thing, i cant root my device by flashing by odin.
Can anyone give me an help?
This is my device:
Android Version 4.3
Baseband Version N7100ZCUEMK3
Build Number JSS15J.N7100ZCUEMK3
This is the error on Odin
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXDME6_N7100TPHDMF1_N7100XXDME4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Ok Bro. All you need is to install a Firmware supported by your phone.
I had an N7100 with exact downgrade problem and was fixed by checking different Firmwares. you can install another if you like, european firmware maybe not compatible with your phone. DOWNLOAD Firmware which has size more than 1000 MBs.
Head Over to this Link and Download the Firmware with starting words "MSR",
http://forum.xda-developers.com/showthread.php?t=2571281
It will surely work.
I have tried all of these 4.1s but the MSR-N7100XXDMC3-201304291545.zip worked.
a "THANKS" will make my Day
exceptionalkhan said:
Ok Bro. All you need is to install a Firmware supported by your phone.
I had an N7100 with exact downgrade problem and was fixed by checking different Firmwares. you can install another if you like, european firmware maybe not compatible with your phone. DOWNLOAD Firmware which has size more than 1000 MBs.
Head Over to this Link and Download the Firmware with starting words "MSR",
http://forum.xda-developers.com/showthread.php?t=2571281
It will surely work.
I have tried all of these 4.1s but the MSR-N7100XXDMC3-201304291545.zip worked.
a "THANKS" will make my Day
Click to expand...
Click to collapse
if this is true then it is a great news..we can downgrade to 4.1.2 even with 4.3 bootloader installed...am i right ?
sora9009 said:
if this is true then it is a great news..we can downgrade to 4.1.2 even with 4.3 bootloader installed...am i right ?
Click to expand...
Click to collapse
That MSR version's size is greater than a 1000MBs which means that it has all the required files, which are needed to downgrade from 4.3 to 4.1.2.
So definitely check it out and share the result with us:highfive:
exceptionalkhan said:
That MSR version's size is greater than a 1000MBs which means that it has all the required files, which are needed to downgrade from 4.3 to 4.1.2.
So definitely check it out and share the result with us:highfive:
Click to expand...
Click to collapse
im pretty sure bootloader cannot be downgrade.
sora9009 said:
im pretty sure bootloader cannot be downgrade.
Click to expand...
Click to collapse
Not sure but it worked for me. I had the N7100 made in korea version which is an international version. I upgraded to 4.3 chinese version. Then I wanted to downgrade to 4.1.2, I tried the chinese 4.1.2 version and two others. Which encountered some errors in flashing. Then I tried the MSR version which worked just fine.
Everytime I was flashing the 4.1.2 versions other than the MSR it incremented the binary counter by 2.
exceptionalkhan said:
Not sure but it worked for me. I had the N7100 made in korea version which is an international version. I upgraded to 4.3 chinese version. Then I wanted to downgrade to 4.1.2, I tried the chinese 4.1.2 version and two others. Which encountered some errors in flashing. Then I tried the MSR version which worked just fine.
Everytime I was flashing the 4.1.2 versions other than the MSR it incremented the binary counter by 2.
Click to expand...
Click to collapse
this is really a great news.Thanks
exceptionalkhan said:
Ok Bro. All you need is to install a Firmware supported by your phone.
I had an N7100 with exact downgrade problem and was fixed by checking different Firmwares. you can install another if you like, european firmware maybe not compatible with your phone. DOWNLOAD Firmware which has size more than 1000 MBs.
Head Over to this Link and Download the Firmware with starting words "MSR",
http://forum.xda-developers.com/showthread.php?t=2571281
It will surely work.
I have tried all of these 4.1s but the MSR-N7100XXDMC3-201304291545.zip worked.
a "THANKS" will make my Day
Click to expand...
Click to collapse
Sorry man, for me didn't work :S It keeps giving the same error :S
Hi everyone. Finally i could flash the note 2 :victory: but i still dont get it why i cant flash through odin
This is how i do it.
1. Flash the ClockworkMod Recovery through.
2. Flash the TWRP 2.6 Recovery.zip through CWM Recovery. (Don't know i i cant flash this recovery directly on odin
3. Flash a CyanogenMod Nightly ROM
4. Install Odin Mobile.
5. Flash the lastest official rom by Samsung for Europe.
6.Yeh I have a official rom on my mobile :victory:
Now I have one problem, when i try to make a call i cant hear the people on the other side and vice versa. I know the mic and speaker are working, if o try to make a call through skype it works perfectly!
Obs.On every ROM i have this problem, on Stock ROMs by Samsung, Europe and Chinese Version and also on CyanogenMod.
When i try to flash the European ROM on Odin it fails when try to write the modem.bin.
I can flash the Chinese ROM without any problems on Odin.
I'm using the lastest ROM JB 4.3 from Samsung
What is the problem now?
The MSR firmware zip link no longer exists?
I have Chines SN N7100 and screwed with no Google accout
The MSR firmware zip link no longer exists??
exceptionalkhan said:
Ok Bro. All you need is to install a Firmware supported by your phone.
I had an N7100 with exact downgrade problem and was fixed by checking different Firmwares. you can install another if you like, european firmware maybe not compatible with your phone. DOWNLOAD Firmware which has size more than 1000 MBs.
Head Over to this Link and Download the Firmware with starting words "MSR",
http://forum.xda-developers.com/showthread.php?t=2571281
It will surely work.
I have tried all of these 4.1s but the MSR-N7100XXDMC3-201304291545.zip worked.
a "THANKS" will make my Day
Click to expand...
Click to collapse
MadR4sta said:
I have Chines SN N7100 and screwed with no Google accout
The MSR firmware zip link no longer exists??
Click to expand...
Click to collapse
Ma Bad...
Bro! the thread is closed, will update that later.
An updated link is Here:https://my.pcloud.com/#page=publink&code=XZgADZWDMzsYh1Xa8uTeOaSPsb2VAn5tb7
I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?
FuTuRisTiC Zo3 said:
I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?
Click to expand...
Click to collapse
Ok I Installed Insecure Boot img via odin3 and my phone rebooted but now instead of it booting at the 1 second samsung screen it goes past it to the galaxy s 3 screen and just sits there. i also installed twrp, it let me mount everything but i cant u adb to push anything and it says i have no os installed. i dont know what moves to make anymore someone please help me out!!!
What version of Android did you have on your phone when it last worked, stock or custom ROM?
dawgdoc said:
What version of Android did you have on your phone when it last worked, stock or custom ROM?
Click to expand...
Click to collapse
its was a stock android rom i believe im not sure what version though.
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
yes im able to go into download and recovery mode
lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
oops didnt fully read your 1st post
lemngo02 said:
oops didnt fully read your 1st post
Click to expand...
Click to collapse
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices
If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?
FuTuRisTiC Zo3 said:
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices
Click to expand...
Click to collapse
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
ok, not to jack his thread, but what if you are on the 4.3 bootloader? i didnt do what he did, but i am stuck in a similar situation. I am on the 4.3 bootloader, but i do have a custom recovery installed. problem is i get an error when i try to wipe. Ive tried flashing stock 4.3 rom via sideload in stock recovery, and modified rom though twrp. both roms install fine, but dont boot, but they do freeze in different points so i know something is being flashed. ive also tried wiping in cwm and stock. im bout ready to flash anything to this phone. oh and a nandroid restore fails after boot img flashes.
FuTuRisTiC Zo3 said:
its was a stock android rom i believe im not sure what version though.
Click to expand...
Click to collapse
From your message, you likely were on stock 4.3. Since you are able to get into recovery and download modes, you may try a restore via custom recovery. Please see the thread below on how to install custom recovery and do a stock restore ...
<http://forum.xda-developers.com/showthread.php?t=2658486>
fastludeh22 said:
ok, not to jack his thread, but what if you are on the 4.3 bootloader? I am on the 4.3 bootloader, but i do have a custom recovery installed.
Click to expand...
Click to collapse
I would then link you to the same thread Larry2999 provided.
dawgdoc said:
I would then link you to the same thread Larry2999 provided.
Click to expand...
Click to collapse
thanks. i had found that thread right after i posted. lets hope. its halfway downloaded. if that doesnt work,ill be posting a thread about the weird way i ended up here and detailed report of what i did and what ive tried...
dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
audit13 said:
If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?
Click to expand...
Click to collapse
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do
never mind folks i got it up and running my only option was to use the sd card so i found my adapter and fixed it. im on 4.1.2 now its updating software now im guessing to 4.3. thank you guys for all the help
FuTuRisTiC Zo3 said:
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do
Click to expand...
Click to collapse
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.
dawgdoc said:
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.
Click to expand...
Click to collapse
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else
FuTuRisTiC Zo3 said:
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else
Click to expand...
Click to collapse
There is a chance that being rooted will prevent you from using the OTA official update. I've seen reports of people being able to update to the official 4.3 while rooted, but I've also seen reports of people not being able to update.
Before you make that update, bear in mind that the official 4.3 bootloader, its name ends in MJB, is the one that will prevent you from ever going back to an older bootloader. Some of the devs and the more experienced on here have no problem with that. Others do consider it an issue. An alternative is to install the leaked 4.3 bootloader, it's name ends in MJ2. That bootloader will allow you to downgrade to the 4.1.1 or 4.1.2 bootloaders, or so I have read. There is information about this in the development and the general forums for our device.
To muddy the waters more; if you intend to sim unlock your device without gettings codes from your carrier you need to do it from the 4.1.1 official ROM. A point you can not return to from the official 4.3 ROM, or so I've read.
I am having a huge booting issue with my Samsung Galaxy S3. Its a brand new one and I tried rooting it but it gave me this error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can get to download mode, but not recovery nor does it boot into the Android OS. I tried putting back the stock OS and it gave me this error:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried follow a bunch of these threads, but I can't seem to resolve my issue yet. I probably have that 4.3 bootloader which screwed everything up. Can someone help me resolve my issue? I literally got this phone today from AT&T. Thank you.
Hello, could please someone help me with this terrible problem? I have Galaxy S4 mini (i9195 LTE version). I flashed clockwork recovery, make a root and install CyanogenMod 11 (everything works fine). But I need to complaint this device back to the shop, because it has problems with random restarts (and I was thinking than maybe a flashing of custom ROM can help, but no). But when I connect device to the PC with Odin (3.09, but I tried 3.07 and others), select original ROM (which I downloaded from sammobile) and click Start, process fails after few seconds (I tried all of USB ports on my laptop and I tried same steps on my second PC), but with no success
Here is the log from ODIN:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUBML4_I9195TMZBML1_I9195XXUBML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of my phone I see this:
ODIN MODE
Model: gt-i9195
Current binary: custom
System status: official
Knox kernel lock: 0x0
Know warranty void: 0x1
CSB-config-LSB: 0x30
Bootloader ap swrev: 2
Write protection: enable
SW REV CHECK FAIL: Fused 2 > Binary 1
And I am trying to flash this ROM:
Model: GT-I9195
Model name: GALAXY S4 mini LTE
Country: Germany (T-Mobile)
Version: Android 4.2.2
Changelist: 2340422
Build date: Fri, 20 Dec 2013 16:46:00 +0000
Product Code: TMZ
PDA: I9195XXUBML4
CSC: I9195TMZBML1
MODEM: I9195XXUBML4
Can someone tell me why I can't return back to stock ROM?
jerrry said:
[SNIP]
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)[/CODE]
[SNIP]
Click to expand...
Click to collapse
See that "Auth" there? Have you allowed access to your phone via USB? First thing that comes to mind for me.
Because you have latest knox bootloader. Do you see that line ""bootloader ap swrev : 2"" in your download mode.....that indicates it.
So this means you cannot downgrade to jellybean roms. Do not try to downgrade because repeated failures of odin might brick your device.
The mbn files odin flashes are all related to bootloader and corrupted bootloader = hard brick.
If you are desperate for jellybean flash the brazil ububne2 for I9195. Only that JB works. Good luck.
ericlnu: Thank you for reply. Did you mean USB debugging in phone settings menu? But I can't boot into system because the last flash causes FAIL message and I can only access to bootloader or download mode.
sasank360: Thank you very much for your support. I didn't know that. So you mean than I need to download Brazil ROM for i9195 (ububne2), which will only works? (and after that I can update to 4.4.2)? Or what Can I do after flashing ububne2 ROM if I need back original stock ROM from my operator?
jerrry said:
ericlnu: Thank you for reply. Did you mean USB debugging in phone settings menu? But I can't boot into system because the last flash causes FAIL message and I can only access to bootloader or download mode.
sasank360: Thank you very much for your support. I didn't know that. So you mean than I need to download Brazil ROM for i9195 (ububne2), which will only works? (and after that I can update to 4.4.2)? Or what Can I do after flashing ububne2 ROM if I need back original stock ROM from my operator?
Click to expand...
Click to collapse
You cannot go back any further. Jellybean ububne2 is the latest jb rom and only that works. Ofcourse you can flash any stock kitkat firmware if you wish. Good luck.
Thank you. I flashed ububne2 ROM to my Galaxy S4 mini and finally, ODIN didn't fails (and phone si working). But when I try to flash latest KitKat ROM (from my operator or any Jelly Bean ROM for my region), ODIN again fails with flashing. Ububne2 is right now the one and only ROM which I can flash to my device.
jerrry said:
Thank you. I flashed ububne2 ROM to my Galaxy S4 mini and finally, ODIN didn't fails (and phone si working). But when I try to flash latest KitKat ROM (from my operator or any Jelly Bean ROM for my region), ODIN again fails with flashing. Ububne2 is right now the one and only ROM which I can flash to my device.
Click to expand...
Click to collapse
Try the knox free kk rom. worked fine for me. knox tripped and running cm11.
kev23m: You mean any unnoficial ROM? This is not sollution for me (I already tried CM11 ROM), but due to random restarts (which is probably hw problem) I need return back stock ROM and complaint device with my seller/shop (as a part of warranty issue).
jerrry said:
kev23m: You mean any unnoficial ROM? This is not sollution for me (I already tried CM11 ROM), but due to random restarts (which is probably hw problem) I need return back stock ROM and complaint device with my seller/shop (as a part of warranty issue).
Click to expand...
Click to collapse
It is the stock rom , knox bootloader removed so people can update without knox. Thanks to SilviuMik
Click Here
oh, I see. But this ROM is only for Galaxy S4 Mini Duos, I have classic LTE version (i9195).
jerrry said:
oh, I see. But this ROM is only for Galaxy S4 Mini Duos, I have classic LTE version (i9195).
Click to expand...
Click to collapse
oops. I think i read somewhere he got a request for 9195 too, maybe he has prepared it. Just do a search and see.
See this