Develop Bugs

TA-1054 - Update from 7.1.1 to xxx ?

hi ppl...
i am on stock 7.1.1 with unlocked bootloader.
can i update straight to custom pie, if so how ?
thanks in advance.
ps: i tried flashing a pie vendor image, getting tons of errors.

need a little help here...
tried installing omni rom.
flashing in slot a works fine, when switching to slot b i get error:
failed to mount /bt_firmware
failed to mount /firmware

You need to update the device firmware if your bootloader Is unlocked
You can search for the firmware and the tool yo flash It
Send me a pm

where can i find this firmware?
weird thing is, i found a way to get omni to run, even with those error in twrp.

paparansen said:
where can i find this firmware?
weird thing is, i found a way to get omni to run, even with those error in twrp.
Click to expand...
Click to collapse
You can find the firmware AND the tool here, justo look for tour model and variant.
If you are stuck ok 7.1.1 you have the chinese variant (00CN) same as i do (i've tried the same)
https://fih-firmware.hikaricalyx.com/hmd_en.html
This page Is from a senior member here on xda, however search your model and variant firmware, if you flash a firmware for other variant YOU WILL KILL YOUR DEVICE
Good luck me if you need further help send me a PM

ah ok... by firmware you mean stock rom ^^
i allready tried to flash the android 8 & 9 from that page
for ta-1054 - ost get stuck at "checking device status".
i was only able to flash the android 7 from that page.

paparansen said:
ah ok... by firmware you mean stock rom ^^
i allready tried to flash the android 8 & 9 from that page
for ta-1054 - ost get stuck at "checking device status".
i was only able to flash the android 7 from that page.
Click to expand...
Click to collapse
Wich variant do you have?
And what firmware are you tring?

like i wrote above: ta-1054 & android 8 & 9

paparansen said:
like i wrote above: ta-1054 & android 8 & 9
Click to expand...
Click to collapse
But is Android one variant? Check on settings where Is device info
In hardware should say somenthing like 00CN or 00WW

there is no android one variant on that page.
i got the china version of ta-1054

paparansen said:
there is no android one variant on that page.
i got the china version of ta-1054
Click to expand...
Click to collapse
Then download the firmware marked as PL2-347C-0-00CN-B04
On the bottom of the page there Is a tool called Generic flashing script (or somenthing like that)
Once you have downloaded both files uncompress the firmware un any folder and copy the tool on the same folder
Click on the tool icon and follow the instructions

Nokia Online Service Tools (Insufficient_Permissions).
I cant do Firmware Upgrade with Nokia Online Service Tools ver. 6.2.8.
Its shows me this Error Message:
(Insufficient_Permissions).
What should i do?

z2 play from china mobile but was flashed with stock 7.1.1 and does not upgrade futher

I got a z2 play in secondhand.
This phone is from china mobile so it had zui to start off with and the previous owner has flashed 7.1.1 .
Now the phone is stuck in 7.1.1 and it does not get get updated to 9.0.
I contacted Lenovo and they say that the build number is not in the database .
I tried ADB sideload with oreo and Pie OTA zip files but does not work keep getting different error messages.
Is there any way this can be done ?

is the bootloader unlocked?

specialdo said:
is the bootloader unlocked?
Click to expand...
Click to collapse
yes bootloader is unlocked already , it says bootloader already unlocked.

your model is xt1710-08?
for xt1710-08 you can follow this guide to update to oreo:
[FASTBOOT ROM] OREO Retail OPS27.76-12-25 (April) using Fastboot
Hi all, i have found this on Motozbrasil Blogspot. It reported XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 e XT1710-10 models as working, but my XT1710-08 works too (see details in this post). >>>> All credits and thanks go to...
forum.xda-developers.com
please pay attention to skip 4 instruction (modem NON-HLOS.bin, modemst1,modemst2 and fsg) to preserve the signal and the fingerprint sensor.
then, you can update from oreo to pie following this guide:
[STOCK] Flash or update guide for XT1710-08 [PPS29.133-30 (Android 9.0 Pie)]
Your bootloader must be unlocked. You can't lock the bootloader, to do this you will need a signed firmware from Motorola (and no one found yet). Instead you can use Magisk to hide the unlocked bootloader, bypass SafetyNet and be able to use...
forum.xda-developers.com

specialdo said:
your model is xt1710-08?
for xt1710-08 you can follow this guide to update to oreo:
[FASTBOOT ROM] OREO Retail OPS27.76-12-25 (April) using Fastboot
Hi all, i have found this on Motozbrasil Blogspot. It reported XT1710-01, XT1710-02, XT1710-06, XT1710-07, XT1710-09 e XT1710-10 models as working, but my XT1710-08 works too (see details in this post). >>>> All credits and thanks go to...
forum.xda-developers.com
please pay attention to skip 4 instruction (modem NON-HLOS.bin, modemst1,modemst2 and fsg) to preserve the signal and the fingerprint sensor.
then, you can update from oreo to pie following this guide:
[STOCK] Flash or update guide for XT1710-08 [PPS29.133-30 (Android 9.0 Pie)]
Your bootloader must be unlocked. You can't lock the bootloader, to do this you will need a signed firmware from Motorola (and no one found yet). Instead you can use Magisk to hide the unlocked bootloader, bypass SafetyNet and be able to use...
forum.xda-developers.com
Click to expand...
Click to collapse
the model XT1710-11

ok, it's the same.. follow the guide. install driver on your pc and minimal fastboot and adb and proceed.

T830 latest stock root - supported?

Looking to update XAR (USA) Tab S4 - Not finding much recent root info regarding firmware builds released in say the last year.
Is Stock rom with root working on latest Android 10 Rev 5? I believe T830XXU5CVG2 is the latest for USA T830.
Download Galaxy Tab S4 SM-T830 (XAR) T830XXU5CVG2 in Samfw - Samsung firmware download
Galaxy Tab S4 SM-T830 (XAR - United States) T830XXU5CVG2 Q(Android 10) samsung firmware download all model, lastest, fast update, completely free and fast speed in Samfw.com ✅
samfw.com
I currently have Android 8.1 (M1AJQ.T830XXU2ARJ3) + Magisk 25.2 + TWRP 3.6.2_90
Are the older guides with encryption disabler relevant still? If a previous guides discussing ~2020 Android 10 builds is that same encryption disabler compatible?
I'd like to avoid odin full stock flash all together. Can I patch stock rom AP with Magisk and just flash the patched AP with TWRP? (And wipe internal storage)
Any pointers be helpful. I've found few older guides but wanting to flash latest stock rom which is why I'm a bit hesitant.
Also came across this post that mentions issues with latest Rev 5 and Magisk ? https://forum.xda-developers.com/t/...tab-s4-sm-t835-android-10-one-ui-2-1.4441257/
Thanks.

Will this work to update to latest Android 10 Rev 5 -T830XXU5CVG2 ?
Currently Android 8.1 + magisk 25.2 + TWRP 3.6.2
1) Stock rom extract - patch boot.img with Magisk app
2) Backup TWRP 3.6 recovery.img
3) Re-tar patched boot.img + recovery.img to AP MD5. Re-tar entire stock ROM.
4) Flash patched stock ROM with TWRP.
5) Wipe internal data and reboot

can't flash with odin even though bootloader being unlocked

i've got an a50 that i want to install TWRP on so i won't have to use the abomination that download mode is. i've unlocked bootloader, yet when i try to flash the TWRP .tar in odin it fails and the phone gives the following error code: "Only officially released binaries are allowed to be flashed(RECOVERY)"
although this is the first time i try flashing stuff on a samsung so you can consider me a newbie, i've got experience with fastboot on others so it must be something i glanced over.
cuz see, when i unlock the bootloader of other phones they let me flash onto them, unlike this one. if you could redirect me to a post with a solution or something that would be very much appreciated!

If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.

Sharath Mane said:
If you are on the latest official build, then The latest official build (last official Update from samsung) won't allow the twrp to be installed.
Use previous build to install twrp.
Click to expand...
Click to collapse
wdym older build? flash an older oneui or use older odin, cuz odin is old enough already.

Which oneui build you are using? January ?
Dowgrade to october build.

Join telegram group (Samsung galaxy A50 official) for having better assistance.

Only officially released binaries are allowed to be flashed
Click to expand...
Click to collapse
This remembers me on my SM-A202F Adventure...
Seems "buggy" Bootloaders... in my case sboot.bin as SM-A202F Exynos...
I was able to fix this "phenomenon" with other Firmware...
Best Regards

Sharath Mane said:
Which oneui build you are using? January ?
Dowgrade to october build.
Click to expand...
Click to collapse
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?

If SM-A505F is your device...
Look here for official collection of Firmware:
Samsung Galaxy A50 Firmware Download SM-A505F Free Download
Samsung Galaxy A50 Firmware Download SM-A505F Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Otherwise replace SM-A505F with your Model Name...
Best Regards

pKalmam said:
can you point me to a site for downloading the october build? furthermore, my plans are to do whatever it takes to get twrp onto it and just flash the unofficial a50 port of lineageos (+official gapps) and debloat with the permission of the owner of the phone. any problems to look at for in the future (seeing that you're a senior here)?
You can proceed.
The problems you may get with FOD, VoLTE. Some operators like Jio completely depend on volte . Without volte we can not make calls and receive messages. Only internet Anwould work.
No aosp rom able to make work volte. For now, volte works only on oneui roms for a50.
Click to expand...
Click to collapse

so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?

pKalmam said:
so if i'm reading this correctly, the device won't be able to make calls if i don't use oneui?
Click to expand...
Click to collapse
You can make calls, just not through LTE (4G) or that's what I know

fran6325 said:
You can make calls, just not through LTE (4G) or that's what I know
Click to expand...
Click to collapse
aight thanks i'll just remove the samsung bloatware from oneui and stick with it then

Question Realme GT master RUI-3.0 Android-12, RMX3360 (IN variant), Root

Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?

Rohan398 said:
Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?
Click to expand...
Click to collapse
I don't think it's possible to unlock the bootloader on the Indian version.

Rohan398 said:
Hi, I tried to Root Realme GT master RUI-4.0 Android-13, RMX3360 (IN variant)..
Info--
1. Started with deeptest.apk, but I never got a success message on my application.
2. Downgraded UI-4.0 to 3.0 and deeptest.apk again didn't work (prolly im missing something).
3. Saw a thread on XDA forums where a guy was able to root on UI-2.0 and Android Version- 11 , I think ROM version is A09.
4. Tried to install A09 but got stuck on bootloop.. Though i downloaded official ROM from realme's website to rollback to Android 11.
5. Had to go to service center and they installed UI-3.0, Android-12, Version - C13..
Question--
1. How can I root UI-3.0, Android-12, Version - C13 , RMX3360 (IN variant) ?
Click to expand...
Click to collapse
Try to wait a little longer, currently it is not possible to unlock the bootloader.
Spoiler: Source
realme Community
Welcome to realme Community, your virtual playground to learn the latest tech news, win exclusive prizes, or simply chat about realme!
c.realme.com