Related
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Inlacrimas said:
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Click to expand...
Click to collapse
Use this toolkit on a pc to fix your recovery, forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Hope it helps.
JoshDaWhite said:
Use this toolkit on a pc to fix your recovery, forum.xda-developers.com/oneplus-3/development/toolkit-oneplus-3-toolkit-unlock-t3398799
Hope it helps.
Click to expand...
Click to collapse
i am not that familir with all these kinds of stuff
what would be the steps i had to do ?
Inlacrimas said:
i am not that familir with all these kinds of stuff
what would be the steps i had to do ?
Click to expand...
Click to collapse
Download the toolkit and unzip it. Launch the bat file and the find the option to flash twrp recovery.
JoshDaWhite said:
Download the toolkit and unzip it. Launch the bat file and the find the option to flash twrp recovery.
Click to expand...
Click to collapse
it doesnt find my device
when i press 7 it tells me error device not found
Inlacrimas said:
it doesnt find my device
when i press 7 it tells me error device not found
Click to expand...
Click to collapse
Enter fastboot mode. Connect device to pc. You need to download the attached zip. Unzip it, open the folder until you see a bunch of files.Click the back button, select the folder, press Shift and click the right side of the mouse, and select open command window here.use the command fastboot devices and report back.
This is the zip I told you about.
JoshDaWhite said:
This is the zip I told you about.
Click to expand...
Click to collapse
nothing happend to the phone stays in fastboot
Inlacrimas said:
nothing happend to the phone stays in fastboot
Click to expand...
Click to collapse
Yes but the command returned any results?
JoshDaWhite said:
Yes but the command returned any results?
Click to expand...
Click to collapse
yes 9771bc7e fastboot like in the linked picture
Inlacrimas said:
yes 9771bc7e fastboot like in the linked picture
Click to expand...
Click to collapse
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
JoshDaWhite said:
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
Click to expand...
Click to collapse
i want any system that works currently since i cant get into recovery ^^
if i can go back into recovery i should be able to manage stuff on my own or i just flash rom xyz afterwards then thats no big deal
you can click on the magnifying glass to make it bigger :good:
JoshDaWhite said:
Unfortunately the picture is too small to read from it. It is great! It means your device can receive fastboot commands! I can guide you how to install stock Oxygen os 3.2.7. That also means you lose your data from internal storage. Do you want Oxygen os 3.2.7?
Click to expand...
Click to collapse
i tried arround and managed to flash twpr with the programm but nothing has changed cant boot into recovery
Inlacrimas said:
i tried arround and managed to flash twpr with the programm but nothing has changed cant boot into recovery
Click to expand...
Click to collapse
Flash the stock recovery then sideload Oxygen os.
JoshDaWhite said:
Flash the stock recovery then sideload Oxygen os.
Click to expand...
Click to collapse
tried flashing stock recovery phone powers of or rebbots or something
how can i sideload theoxygen os ?
Think i just helped myself with
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
works again thanks for your help
Inlacrimas said:
tried flashing stock recovery phone powers of or rebbots or something
how can i sideload theoxygen os ?
Think i just helped myself with
https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/
works again thanks for your help
Click to expand...
Click to collapse
Glad you fixed it.
JoshDaWhite said:
Glad you fixed it.
Click to expand...
Click to collapse
Really appreciate all the time you spent helping here :good:
Inlacrimas said:
I was on cm 13 something and flashed cm 14.1 everything was working ok but i didnt flashed gapps zip.
so i tried to go into recovery and there was no recovery anymore...
then i reset cm 14.1 that i can start from a fresh rom and since then i cant start my phone
i dont have a recovery i can get in but i can get into fastboot mode
hope someone is able to help me and could tell me what to do / try to install a working system again
Click to expand...
Click to collapse
Fyi, if u decide to go back to 14.1, you will need to flash modified twrp http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Then recovery will stay intact
how to root mi max 3 on miui 10 global stable rom
I am also looking for that. yet ı cant find the real true sequence. there ıs twrp and magisk and root so many things... even if i get twrp installed it asks for passwords and i dont know what to do next..
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Thanks. Did the same and it worked.. Which rom are you using?
Hi , I've unlock the bootloader then flash twrp but any time I enter recovery it ask for a password.
I've try formatting data partition from twrp but it's the same...
What can I do ?
thank's.
Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.
tometoyona said:
Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.
Click to expand...
Click to collapse
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img
LostFade said:
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img
Click to expand...
Click to collapse
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...
Gadgetguy65 said:
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...
Click to expand...
Click to collapse
if problem is password only, format data.
LostFade said:
if problem is password only, format data.
Click to expand...
Click to collapse
I did not want to format anything. I just left it as is (clicked cancel at the password) and flashed the ZIP for Magisk. All works fine after this
anyone tried to root recently? i am also iinterested
Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Can confirm this works on 10.3.5 also.
DelphinusMinor said:
Can confirm this works on 10.3.5 also.
Click to expand...
Click to collapse
do u know what's the difference between that twrp and the original one?
HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
No. Maybe it's coded better for Xiaomi phones?
Request Unlock from Xiaomi.
Wait for 1 week. (98 hours)
Search "XiaoMiTool V2"
Don't bother with image flashing. Just follow XiaoMiTool V2.
HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs
Skyllery said:
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
i'm reading up on it now, is orange fox better than twrp? i've never used it..
also, why is encryption support for?
donia1022006 said:
how to root mi max 3 on miui 10 global stable rom
Click to expand...
Click to collapse
This is actually quite easy
1. Unlock the phone using the well documented process
2. Download TWRP for Mi Max 3 (on your PC)
3. Get ADB tools on your PC
4. Download Magisk.zip on the phone
5. Put your phone in fastboot mode
6. Boot TWRP on the phone ( no need to install, you can disregard the encryption comment)
7. Using TWRP flash the Magisk.zip you have downloaded
8. Reboot - and you are rooted
Resources:
1. TWRP img: https://drive.google.com/open?id=1M04t6uspBLDJfHXFfJQeOzqDRSk56UMF
2. TWRP zip: https://drive.google.com/open?id=16IbNJJspaqqimqdLeNGBnkRoj3rZ0zcR
Copy all into adb folder
Proceed:
1. Connect the device in fastboot mode, enter the command cmd: fastboot boot TWRP-3.3.1-1004-ASUS_ROG2-CN-wzsx150.img (boot, not flash boot, I do not write missing)
The machine will automatically boot into twrp
2. In Twrp choose Advanced => ADB sideload, enter the command: adb sideload TWRP-3.3.1-1004-ASUS_ROG2-CN-wzsx150.zip
3. Reboot into Twrp, select Advanced => Install root
Done, start and enjoy!
My telegram
https://t.me/rogphonevietnam2
That's work only on CN rom or also on WW?
dracoolia said:
That's work only on CN rom or also on WW?
Click to expand...
Click to collapse
All
Any other tested this method? Could someone else confirm this. Ty
iampatricktan said:
Any other tested this method? Could someone else confirm this. Ty
Click to expand...
Click to collapse
Working well
This works great! Thanks!
You install root or flash zip magisk 20?
dungnghien said:
You install root or flash zip magisk 20?
Click to expand...
Click to collapse
You just helped me on Telgram...Im rich...LOL. Im thinking magisk 20 should work. What do i know though?
suzook said:
You just helped me on Telgram...Im rich...LOL. Im thinking magisk 20 should work. What do i know though?
Click to expand...
Click to collapse
Oh. You can try 20!
suzook said:
I tried this...it booted fine with root, and wifi working, but the next reboot, slot was corrupt. I will try again
Click to expand...
Click to collapse
I think i will let someone else try 1st....LOL
dungnghien said:
Oh. You can try 20!
suzook said:
I tried this...it booted fine with root, and wifi working, but the next reboot, slot was corrupt. I will try again
Click to expand...
Click to collapse
Click to expand...
Click to collapse
my pc dont find fastboot mode
i try connect my rog phone 2 to pc and tell me waiting a device, anyone know how fix? thks
I have same pronlem, when I connect my phone on my laptop in adb that's work but when I'm in fastboot mode that's not find my phone any one can hepl, thx a lot
thermaldude said:
i try connect my rog phone 2 to pc and tell me waiting a device, anyone know how fix? thks
Click to expand...
Click to collapse
dracoolia said:
I have same pronlem, when I connect my phone on my laptop in adb that's work but when I'm in fastboot mode that's not find my phone any one can hepl, thx a lot
Click to expand...
Click to collapse
You guys using the side usb port?
suzook said:
You guys using the side usb port?
Click to expand...
Click to collapse
For me that's work well now I forget to edit PATH??, but I have a question when I install TWRP I dont active SU in advanced in TWRP, I install magisk zip to root my phone, but... because of that I lost TWRP, if I install again TWRP in fastboot I loose my root or not? Because both are boot image
dracoolia said:
For me that's work well now I forget to edit PATH??, but I have a question when I install TWRP I dont active SU in advanced in TWRP, I install magisk zip to root my phone, but... because of that I lost TWRP, if I install again TWRP in fastboot I loose my root or not? Because both are boot image
Click to expand...
Click to collapse
You lost twrp after flashing magisk.zip? That doesnt make sense
suzook said:
You lost twrp after flashing magisk.zip? That doesnt make sense
Click to expand...
Click to collapse
I was on ww 1908.12 with twrp installed. I then updated to magisk 20.0 by flashing the zip through twrp. This caused me to lose twrp and I get an error unbootable slot when trying to enter into recovery now. Since there is no dev support I figure I'm not missing much without it. I was able to update to the latest firmware ww1908.25 by downloading the file from the op gdrive link. Moving it to root then apply update. Go to magisk install to inactive slot and reboot.
sesz said:
I was on ww 1908.12 with twrp installed. I then updated to magisk 20.0 by flashing the zip through twrp. This caused me to lose twrp and I get an error unbootable slot when trying to enter into recovery now. Since there is no dev support I figure I'm not missing much without it. I was able to update to the latest firmware ww1908.25 by downloading the file from the op gdrive link. Moving it to root then apply update. Go to magisk install to inactive slot and reboot.
Click to expand...
Click to collapse
What you did is something different....you absolutely will lose twrp with an ota
Yeah same message, when I have installed zip of magisk with TWRP everything work well with magisk, but now when I want to boot on recovery I have big message in red
ERROR UNBOOTABLE SLOT
dracoolia said:
Yeah same message, when I have installed zip of magisk with TWRP everything work well with magisk, but now when I want to boot on recovery I have big message in red
ERROR UNBOOTABLE SLOT
Click to expand...
Click to collapse
Get back to Fastboot and run this command
fastboot set_active other
^ Then hit enter.
You can go back to recovery by
fastboot reboot recovery
sesz said:
I was on ww 1908.12 with twrp installed. I then updated to magisk 20.0 by flashing the zip through twrp. This caused me to lose twrp and I get an error unbootable slot when trying to enter into recovery now. Since there is no dev support I figure I'm not missing much without it. I was able to update to the latest firmware ww1908.25 by downloading the file from the op gdrive link. Moving it to root then apply update. Go to magisk install to inactive slot and reboot.
Click to expand...
Click to collapse
can you provide me with a link for the version 25 for ww?
and also i tried the method given in the first post but i still cannot connect wifi on my phone. I am on verion 21
Sorry if this has been posted but is it possible to switch to a custom ROM when running Android 10 (v11.0.4.0)?
If you have adb installed on your pc you only need these 2 for twrp, there might be a newer versions but they work fine for me.
img: (to boot from adb)
https://drive.google.com/open?id=1AwtLrERrSEql-ihhiAWPUh6DoXSWhZb9
zip: (to flash in twrp)
https://drive.google.com/open?id=1whcfSqbcNjmqXdnysu25KVX9PyX4mb-P
andraslate said:
If you have adb installed on your pc you only need these 2 for twrp, there might be a newer versions but they work fine for me.
img: (to boot from adb)
https://drive.google.com/open?id=1AwtLrERrSEql-ihhiAWPUh6DoXSWhZb9
zip: (to flash in twrp)
https://drive.google.com/open?id=1whcfSqbcNjmqXdnysu25KVX9PyX4mb-P
Click to expand...
Click to collapse
So should I just use MiFlash to boot each image file individually? Then I assume once TWRP is in I can flash as usual?
RensoreK said:
So should I just use MiFlash to boot each image file individually? Then I assume once TWRP is in I can flash as usual?
Click to expand...
Click to collapse
Never used MIflash so I don't know how that works. I thought it's only to install stock rom, but I might be wrong. Use ADB to install custom ROMs
With the img file you can boot to twrp with ADB command. Then after installing a custom rom use the zip file to flash it .
I am unable to find any adaptable guide anywhere. Tried using XiaomiTools v2 and was unable to flash because my device (even though has a Mi account created) cannot be linked to my device, I have no where to link it on AndroidOne Global version on Android 10. No clue how you guys are doing this. I've flashed phones since Blackberry models here on XDA and this is the only device instructions are halfed.
RensoreK said:
I am unable to find any adaptable guide anywhere. Tried using XiaomiTools v2 and was unable to flash because my device (even though has a Mi account created) cannot be linked to my device, I have no where to link it on AndroidOne Global version on Android 10. No clue how you guys are doing this. I've flashed phones since Blackberry models here on XDA and this is the only device instructions are halfed.
Click to expand...
Click to collapse
find dee_stroy twrp img one. use adb (platfom-tool), then turn off your device and make it go to bootloader state (fastboot). on platform-tool open cmd. (just type on folder path cmd) then type fastboot boot (the name twrp).img and you are set to go. if you wanted to install twrp permanently, after u boot twrp via bootloader, copy the twrp zip to your device and install it. the procedure is all; the same for every rom tho. nothing has changed
Can anybody help me installing this?? .. I had twrp before I installed havoc is 3.6 (android 10) but i didnt install twrp now I can't install twrp please anybody help me
Autokiddo said:
Can anybody help me installing this?? .. I had twrp before I installed havoc is 3.6 (android 10) but i didnt install twrp now I can't install twrp please anybody help me
Click to expand...
Click to collapse
fastboot boot trwp.img
Use TWRP to install twrp.zip
If you were rooted...
fastboot boot patched.img
Use Magisk manager to install (direct)
install twrp
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
InsectWarfare said:
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
Click to expand...
Click to collapse
Nothing?
Inviato dal mio Mi A2 Lite utilizzando Tapatalk
InsectWarfare said:
hi, could someone kindly give me a step by step guide to install the twrp recovery?
i have the build QKQ1.191002.002.V11.0.10.0QDLMIXM.
thank you.
Click to expand...
Click to collapse
This has been documented elsewhere...
The short version is
1) fastboot boot twrp.img
2) adb push twrp-installer.zip /sdcard
3) use TWRP to install the zip
If you also want Magisk you have to install that again. Flash from TWRP or follow the usual process.
Hello, anyone facing Issue after flash Eliteroms weekly? I did try flash using TWRP but after successful flash it keep boot on Fasboot
wacayalu said:
Hello, anyone facing Issue after flash Eliteroms weekly? I did try flash using TWRP but after successful flash it keep boot on Fasboot
Click to expand...
Click to collapse
First install:
Use the first install.bat file included in the extracted zip folder, in Fastboot mode.
With Twrp/wipe format data type yes/reboot twrp(if errors red lignes,repeat the operation by restarting on the Twrp each time).
You need to update with OTA not directly with TWRP.
You may be using an older version of TWRP.
These roms are Hybrid you can use the update.bat file included in the extracted zip folder, in Fastboot mode.
NOSS8 said:
First install:
Use the first install.bat file included in the extracted zip folder, in Fastboot mode.
With Twrp/wipe format data type yes/reboot twrp(if errors red lignes,repeat the operation by restarting on the Twrp each time).
You need to update with OTA not directly with TWRP.
You may be using an older version of TWRP.
These roms are Hybrid you can use the update.bat file included in the extracted zip folder, in Fastboot mode.
Click to expand...
Click to collapse
Aloha Wacayalu,
Did you get the elite roms working on the 13 pro? If so what version are you using. I've been think about flashing elite roms as well, but don't know which version to flash. Could you let me know.
Mahalo
devilman30 said:
Aloha Wacayalu,
Did you get the elite roms working on the 13 pro? If so what version are you using. I've been think about flashing elite roms as well, but don't know which version to flash. Could you let me know.
Mahalo
Click to expand...
Click to collapse
Only flash using fasboot atm and its working on 14.0.23.3.20, if u flash using twrp it wont boot, the dev said its gonna take a while for flash using twrp
wacayalu said:
Only flash using fasboot atm and its working on 14.0.23.3.20, if u flash using twrp it wont boot, the dev said its gonna take a while for flash using twrp
Click to expand...
Click to collapse
Mahalo for the information... what is your stock version when you purchased the phone? I'm on xiaomi global. How is the rom ? Is it worth it? Have you had any other problems?
devilman30 said:
Mahalo for the information... what is your stock version when you purchased the phone? I'm on xiaomi global. How is the rom ? Is it worth it? Have you had any other problems?
Click to expand...
Click to collapse
Was on global, did try last build for elite but not satisfied as thier build on poco f3.. rn im on eu + dfe
wacayalu said:
Was on global, did try last build for elite but not satisfied as thier build on poco f3.. rn im on eu + dfe
Click to expand...
Click to collapse
what is dfe?
RockyAJ said:
what is dfe?
Click to expand...
Click to collapse
Disable force encrypt, to remove the encryption on partition
D.F.E is not necessary if you:
Format the data
To update
If you use a TWRP which decrypts the data.
No lock screen security.