Related
Hello guys,
my Oneplus 3 is hard bricked, I tried the methods in the Mega Unbrick guide, my device already gets shown as Qualcomm 9008 ... in Device Manager, so I started the MSM DownloadTool and it flashed anything without errors. But when the phone reboots I get a black screen and the white led is on.
I can't even boot to stock recovery (Volume down + power doesn't work and rebooting to recovery through fastboot doesn't work, too....) my bootloader is locked and all attempts to unlock the bootloader are failing with the error "remote: oem unlock is not allowed"
So at the moment I'm stuck in fastboot and nothing else works -.-
Can someone please help me?
The unbrick tool has an old firmware, can I replace the files with files from a newer firmware?
Thanks!
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Puddi_Puddin said:
Have you tried the exact steps from Method 2? Maybe unzip it? If that doesn't work which is highly unlikely then there is not much you can do.
Click to expand...
Click to collapse
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
min-dfreak said:
Yeah I tried it as I said, the MSM DownloadTool showed me Completed and the phone tried to boot up after that.
I'm now contacting the OP Customer Support, I've read a few times that they have other files to unbrick the phone with the MSM Tool.
Click to expand...
Click to collapse
Ye thats the only thing you can currently do... May i ask what you have done how did it get bricked?
I just updated AICP ota and after flashing the update my phone didn't boot up. The screen went black immediately.
So I thought that it is maybe a Problem with the ROM and I tried to go back to stock.
Flashed the stock recovery and locked the bootloader, but I couldn't boot to the stock recovery.
There it started...
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
drmuruga said:
Switch off the phone, connect usb ,open unbrick tool full ( method 2),Press vol up,down and power buttons same time ,tool will recognize phone then start , you must unbrick now.
NEVER LOCK YOUR PHONE.
Click to expand...
Click to collapse
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
min-dfreak said:
Please read, I already did that.
The tool completed it successfully, but still black screen after a reboot.
Only the LED is flashing white.
I already contacted the support, they will do it remotely tomorrow.
Click to expand...
Click to collapse
Never but never lock your bootloader...
If recovery, boot or system partition is modified. There's no harm in re locking otherwise..
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Dsn Fouad said:
Hi guy i have a big problem i buy a one plus 3 i was using it 1 month and there was a update i don't remember what it was oreo or nougat when the update downloaded i install it and the i got a bootloop 2 hours didn't boot and my device is not rooted and didn't enable developer option i tried to install stock rom by adb and fastboot with sideload it load but it stuck on 50% then it say failed tried to install recovery in fastboot i installed drive oneplus 3 ect but can't flash it i think because i have oem locked i trien to unlocked it says failed 00.6s ect and i don't have guarantee i have dash and cable charger i can charge it and go to fastboot and recovery but when i boot my phone normally i show logo one plus then the two red bullet who move then it power off
Click to expand...
Click to collapse
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
SivaMaxwell said:
I'm assuming your device is OnePlus3 and not 3T
Okay. Firstly give a try to Oneplus3 openbeta Nougat special edition.
Oneplus3 : http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Method 1 : specific recovery for open beta24 available in Oneplus downloads
https://downloads.oneplus.com
Find legacy roms and find openbeta 24
Method 2: latest TWRP
If your bootloader is locked this isn't gonna work. But if it is still in unlocked .
Download TWRP for Oneplus3 from official TWRP site
Flash the recovery you choose using fast boot.
Now using asn command, try to flash the special edition.
Mostly this solves your issue. It helped me.
Let me know whether you face any issues.
Note: in this method you may lose every data you have on the phone. It boots up (if at all ? ) with fresh firmware and fresh storage (sometimes)
Click to expand...
Click to collapse
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Dsn Fouad said:
Yeah i have oneplus 3 my bootloader is locked can't flash anything im going to try method 1
By the way why beta 24 why not lastest update ? And whene i download it do you want me to flash it with sideload like #adb sideload openbeta24.zip ?
Click to expand...
Click to collapse
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
SivaMaxwell said:
The file I gave link to is a special edition by Oneplus for Openbeta-Nougat. You can go to Nougat from any rom.
Rom: http://downloadmirror.co/Wa9/O2N_OBT_15801_OXYGEN_SIGN_wipe.zip
Specific recovery should be downloaded from Oneplus website.
You can sideload using adb or store internal storage and flash.
I tried with latest TWRP recently and it worked.
Note that all your data gets wiped if you use oneplus-recovey and asn sideload
Click to expand...
Click to collapse
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Dsn Fouad said:
The problem is i dont have store internal storage and when i try to flash anything it say oem locked not allowed and when i flash a rom with adb sideload jfjd.zip it stuck on 60% will it be complete if i use your beta ?
Click to expand...
Click to collapse
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Thanks i will download and give it a try
SivaMaxwell said:
Yes, it won't stick at 60% with this beta. I'm not the owner. It was provided on Oneplus forums. Try that one and tell me the result. It is a signed zip. So it will work on official Oneplus-recovery
Click to expand...
Click to collapse
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Dsn Fouad said:
Before that i downloaded msm download tool 3.0.8 i tested it and it boot but it say enter pin password i dont know what is the pin i didn't use a pin before it was working
Click to expand...
Click to collapse
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
SivaMaxwell said:
Simply reboot to recovery and say yes to wipe every data.
Note1:
all your internal data is wiped in the method I suggested. I can recall there is a method to recover data only if bootloader is unlocked. If your bootloader is locked there is no other way.
Note2: your data will be formatted to f2fs file system. If you want to flash any custom ROM, YOU SHOULD CHECK COMPATIBILITY WITH F2FS in that ROM forums.
It's better to always have EXT4 file system. You can change this file system with TWRP
Click to expand...
Click to collapse
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Dsn Fouad said:
Bootloader is locked i tryed to flash the 24 beta yoi give me but it stuck on 47 and say failed im just going to sell it
Click to expand...
Click to collapse
Even if the bootloader is locked, you can boot into the current rom and unlock simply by going to advanved options.
It is a very simple process.
Hi guys. Just looking for a bit of assistance. I unlocked the bootloader and installed twrp. Booted into twrp and tried to flash the rom. While it was flashing, the screen was showing an error 7 showing the vendor as my old phone, a Zuk 2 plus. Flashed Miui 10 back on for the time being. Do I have to install or flash a specific image to the phone to install the custom rom?
In the past I also got same error, just try Orange fox recovery
I'll have a look at that when I get a chance. Also been told I might have to update the firmware. Thanks for the reply! ?
Oops, I also forgot I used this firmware https://github.com/XiaomiFirmwareUp...n_miui_MIMIX2Global_9.1.24_33b7dc74ff_8.0.zip
With this one error 7 also seems to disappear
Thanks for the link, I will give it a go tomorrow. I'll see how it goes! ?
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
chrwo said:
Hi guys,
i want to flash my MiPad 5 from chinese to global Rom.
I already installed the Bootloader Unlock Tool and waited one week.
Now the bootloader is unlocked and i downloaded "Xiaomi Pad 5 Global MIUI V12.5.4.0.RKXMIXM Update". There are two different Download Versions, one for Recovery and one for fastboot. Which one is correct and usable without root?
Now i'm Stuck in the Process of Downloading TWRP because I can't find a specific version for my MiPad 5. Is there anybody who can give me a step by step Guide what to do now?
Thank you
Click to expand...
Click to collapse
Try fastboot method without bootloader lock
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
TWRP is not required to flash the global ROM.
Just specify the unzipped global ROM as the working directory of MiFlash.
try flashing fastboot rom using miflash tool
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Mi Pad 5 didn't have recovery partition, since it use A/B structure. You must execute fastboot boot recovery.img and after that install recovery to RAMdisk.
chrwo said:
I bricked it....
Error occurred while flashing the Global ROM.
After that it went directly into fastboot. Can't turn it off right now.
At the moment i am trying to install twrp with help of minimal adb and fastboot. getting errors now...
Tried an Intel and a AMD Computer. Tried CN Rom and Global ROM. Endless flashing, no result. Green loading bar is completed, saying mismatching and flashing... Now its stuck in Fastboot Mode.
can anybody help?
Click to expand...
Click to collapse
Whered you even get twrp? Had an error while flashing from cn to global as well about sparse super failed. Then tried reflashing but i got the same error as you had and all i did was reboot the tablet in fastboot while it was still in fastboot and after that it flashed successfully even though it threw out am error flash is not done but the tablet rebooted hy itself and then booted up after a minute or two. Almost gave me a heart attack while i was at it
Edit: seems you flashed it successfully already thats good. Fastboot can be clunky on ryzen sometimes, i remeber back on mi a2 had to use a hub instead of directly connecting my phone to my ryzen pc for fastboot to work properly and not get stuck while flashing. But now i can connect directly after switching to a b450motherboard, was using a b350 before
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
chrwo said:
finally could flash the global rom.
i am pretty sure it was about the ryzen gaming pc i used. now it worked out with my intel laptop....
strange problem
Click to expand...
Click to collapse
It would be great if you can make a step-by-step guide on how to do this. Thank you.
puleen said:
I am trying to use the Mi Flash tool and when I open it, it tells me to install Drivers, but the screen just hangs there when I press Continue.
I also get an error saying a specific log folder is not present.
I also am trying to install global rom on china model. Please help!
Click to expand...
Click to collapse
prob just driver problems, i use ryzen and it works fine.
Don't know if I need to create a new thread. After the unlocking, I tried to change the region from RU to CN and got the same problem after a "successful" update as chrwo with "Mismatching image and device" error and fastboot mode. Then I tried to flash global version and the device error is gone but I still have the fastboot mode. Recovery from MiToolv2 doesn't help either, after successful recovery tablet still goes only to fastboot.
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Choochter said:
Could maybe try this:
https://www.xiaomitool.com/V2/
Don't have any experience with it personally, but worth a try
Click to expand...
Click to collapse
Not work for me.
But when I try with Miflash tool and anoter Rom (newest), it worked
Critical Hit said:
Got it working after flashing with miflash on the intel PC. I used a USB port on the motherboard this time.
So maybe there is really a problem with Ryzen.
Click to expand...
Click to collapse
I meer the same errỏr when I use Intel PC.
So, I dont think this a problem of Ryzen
i also brick the device using mi-flash sucking program. i finally using fastboot command flashing which copying from the stock rom "flash_all.bat" file.
So we can't lock the bootloader after installing the global rom?
Hi all!
Long story short, I beefed it...
I tried flashing the unofficial twrp and accidentally did format all on spflashtool.
I'm two months in and for the life of me I can't fix my phone... I've even tried to learn how to write a custom OS myself to fix it but I'm definitely not smart enough.
So, here's where I'm at right now:
When I flash the engineering ROM, the phone boots normally and all that seems to work, but flashing the official MIUI causes a bootloop to the stock recovery.
In there, there's the message "NV data is corrupted".
I'm 2 months in now, so I've seen almost all google pages, so yes, I've tried flashing using the official tool, flashed vbmeta with --disable-verity and --disable-verification.
It's my phone and I have the box here, so I have both IMEI numbers which I managed to flash in the engineering ROM, but flashing the normal MIUI somehow deletes the IMEI numbers again.
I can get into fastboot so the bootloader is unlocked, but I can't boot into the system so I can't enable dev options.
please, if you can help I'm more than happy to answer any other questions and being called an idiot :')
help me, XDA, you're my only hope
check the link
BootLoop not letting me access fastboot
Okay so when I flashed Magisk boot image my device activated boot problems. And when I tried to access recovery mode via adb (from Android Studio), my phone entered a bootloop from which I cannot exit. Vol down + power buttons does not work...
forum.xda-developers.com
I'm in the same exact boat as you...That guide was absolute trash and I can't find anything.
historypm said:
I'm in the same exact boat as you...That guide was absolute trash and I can't find anything.
Click to expand...
Click to collapse
Hold tight, I'm very close to fixing it!
Got everything working except mobile network. As soon as I figure that out, I'll post a fix here
RadixMalum said:
Hi all!
Long story short, I beefed it...
I tried flashing the unofficial twrp and accidentally did format all on spflashtool.
I'm two months in and for the life of me I can't fix my phone... I've even tried to learn how to write a custom OS myself to fix it but I'm definitely not smart enough.
So, here's where I'm at right now:
When I flash the engineering ROM, the phone boots normally and all that seems to work, but flashing the official MIUI causes a bootloop to the stock recovery.
In there, there's the message "NV data is corrupted".
I'm 2 months in now, so I've seen almost all google pages, so yes, I've tried flashing using the official tool, flashed vbmeta with --disable-verity and --disable-verification.
It's my phone and I have the box here, so I have both IMEI numbers which I managed to flash in the engineering ROM, but flashing the normal MIUI somehow deletes the IMEI numbers again.
I can get into fastboot so the bootloader is unlocked, but I can't boot into the system so I can't enable dev options.
please, if you can help I'm more than happy to answer any other questions and being called an idiot :')
help me, XDA, you're my only hope
Click to expand...
Click to collapse
Good evening, sorry for my bad English, but I have the same problem when this happened, I had miui V13.0.7.0 there, I got bootlop, I loaded V12.5.2.0 there and the phone worked everything except the network, try and let me know
You have to download the firmware and paste it into the platform tools folder and click flash all.bat
I tried for like 3 hours to find a boot.img and i had root on my phone, but without wifi and sound.
a quick google search showed me that it was because i had a wrong version of the boot.img, afterwards i found another one and now after i have tried installing twrp, booting and flashing using adb (stock and modified versions of boot.img) but it just keeps bootlooping. in twrp i cant wipe, make a backup, see any files in /storage/ and i have no clue what to do next.
What model 7T do you have? HD1907? What was the rom that you were using before you installed TWRP on? OOS12 does not support TWRP. Custom rom A13 does not support TWRP. Only a few custom rom A12 and OOS11 support TWRP.
Idk but I'm just wondering if flashing the last working rom image (dirty flash)? That would eliminate TWRP(?) and eliminate Magisk(?) while hopefully keeping the device from being wiped possibly?
*** Hopefully someone could/would verify this before you attempt... ***
i was on android 11 but i cant remember the version, i have HD1903 (EU ver). i THINK i had the one from the oneplus website(https://service.oneplus.com/us/search/search-detail?id=2096229) but idk anymore
I JUST RANDOMLY TRIED BOOTING MY PHONE AGAIN AND IT WORKED imma check if everything works and will regardless still look at this thread bc it can prob break easily
nah wifi and sound still dont work, but im not in bootloop anymore
MimKA22 said:
I JUST RANDOMLY TRIED BOOTING MY PHONE AGAIN AND IT WORKED imma check if everything works and will regardless still look at this thread bc it can prob break easily
nah wifi and sound still dont work, but im not in bootloop anymore
Click to expand...
Click to collapse
Msmtool back to oos11
can you describe how to use it or send a link to tutorial or smth thx man <3
MimKA22 said:
can you describe how to use it or send a link to tutorial or smth thx man <3
Click to expand...
Click to collapse
[OP7T][OOS 11.0.5.1 HD65AA/BA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
i cant find the file for my current version and it doesnt work if i try it with the only version that is android 11
and i cant turn my phone back on
and after i installed the drivers i had to restart my pc and now there is this thing at the bottom right:
testmode
windows 10 pro
...
i waited until my phone had no more battery charge and now im bootlooping again :/
nvm it just booted
im downgrading it now and i dont get the error "smth communication smth" in msmtool anymore
alr it worked my phone is wiped again but i can turn on wifi and sound
but how do i root my phone now? I have an Idea, im gonna write step by step what i think gets me a rooted phone please confirm if that would not break my phone ^^' (bootloader already unlocked)
1. enable usb debugging and allow my pc
2. download and install the latest magisk version from the github
3. download magisk patched boot.img for ver 11.0.5.1BA BUT since i cant find anything on the internet im gonna have to use the zip file from the unbrick tool thing (https://onepluscommunityserver.com/list/Unbrick_Tools/OnePlus_7T/EU_HD65BA/R/) and then patch the boot.img using magisk myself
4. then use platform tools and type following commands: "adb reboot fastboot", "fastboot flash boot {the patched boot image file}"
5. then use magisk to direct install the root thing
i just realisized the unbrick thing that i wanted to use instead of a boot.img doesnt have a boot.img in it... WHERE CAN I FIND A BOOT.IMG brooo androidfilehost.com doesnt have it the unbrick tool doesnt have it
omg i realized i could update my phone to 11.0.9.1 then download the same version from official website and use the dumper to get the boot.img **** meee
wait it sais its 11.0.9.1HD65 AA and not BA **** me
k nvm i just changed the site settings to germany and now its BA
i just went for it and now my phone is rooted thank you very much for your help i would've prob tried to revert back to stock for like 2 weeks and then cry that i cant root my phone thank you so much xd