[ROM][OFFICIAL] LineageOS 20 for Galaxy S10e/S10/S10+/S10 5G Exynos - Samsung Galaxy S10/S10+/S10 5G/E Cross Device Deve

[ROM][OFFICIAL] LineageOS 20 for Galaxy S10e/S10/S10+/S10 5G Exynos - Samsung Galaxy S10/S10+/S10 5G/E Cross Device Deve

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 13, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
Firmware: Included in the build
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions:
Follow the instructions on the wiki page for your device https://wiki.lineageos.org/devices/#samsung
Only the provided lineage recovery will be supported, using TWRP might result in a possible data loss!
Note: You may use Odin instead of Heimdall, for this you will need to rename the recovery image to recovery.img and pack it into a tar archive.
Downloads:
Builds: https://download.lineageos.org
GApps: https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Support
Telegram group
Contributors
Linux4
Source Code: https://github.com/LineageOS
Kernel source: https://github.com/LineageOS/android_kernel_samsung_exynos9820

reserved

reserved

Finally, nice to see official rom, is volte and vowifi supported

I've been on this since it first showed up on the lineage site and it's rock solid. Thanks for keeping our devices relevant!

alexdonwarez said:
Finally, nice to see official rom, is volte and vowifi supported
Click to expand...
Click to collapse
afaik both depends on samsung's proprietary stuff and no AOSP ROM has it.

I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!

sjeps said:
I am interested in some features, namely double tap to sleep, tap to wake, raise to wake, and a fully working cam. Could you give me some info on these?
Thanks a lot!
Click to expand...
Click to collapse
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.

Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
d3viou5 said:
Dt2s - yes
T2w - yes
R2w - not afaik
Cam works fine, but I prefer gcam.
Click to expand...
Click to collapse

sjeps said:
Thanks a lot for the reply!
Regarding the camera, I found that with some other ROMs the camera stutters during the shooting, and also the slow-motion isn't working at all
This is true for Gcam as well (in other roms)
The only stable camera I found is the stock one, e.g. in OneUi 5 adapted ROM
Click to expand...
Click to collapse
I'm using:
MGC_8.1.101_A9_GV2b_ruler.apk
No stuttering and slow motion (both speeds) works fine.
Worst case is some blown out highlights look neon blue, but this is rare. I think that may be a gcam processing issue over anything else.

thanks for developing OS 20 for S10, moved from os 19 recently, everything works ok but a bit disappointed to see that calls volume and notifications volume are combined, impossible to set volume level separately (as was in OS 19), any chance to change this in the future?

Hi,
I'm trying to upgrade my S10 beyond1lte from 19.1 to 20, but I have errors during installation and /vendor partition seams to be corrupted after installation (impossible to mount /vendor) :
I've tried to manualy decompress and comvert to img vendor.new.dat.br which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip, but there is a probleme to open img (file corrupted ?).
When I took an other lineage zip (ie lineage-20.0-20230612-nightly-starlte-signed.zip for starlte), there is no problem to decompress, convert and open vendor.img.
Can you please verify vendor image which is in lineage-20.0-2023MMDD-nightly-beyond1lte-signed.zip (problem present for all zip available in download) ?
Thanks

A huge thanks to @Linux4 and the LOS team! I've been using it for a week and it's great, as usual

Hi.
I would like to see the changelog, but the link doesn't work.

[email protected] said:
Hi.
I would like to see the changelog, but the link doesn't work.
Click to expand...
Click to collapse
LineageOS 20.0 Changelog
LineageOS 20.0 Changelog. This page is listing the official changes and downloads for LineageOS 20.0 (Android 13 13).
www.lineageoslog.com

Related

[OFFICIAL][7.1] LineageOS 14.1 - Xiaomi Mi3 [cancro]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
All information and files — both in source and compiled form — are provided on an as is basis.
No guarantees or warranties are given or implied. The user assumes all risks of any damages
that may occur, including but not limited to loss of data, damages to hardware, or loss of
business profits. Please use at your own risk. Note that unless explicitly allowed by the warranty
covering your device, it should be assumed that any warranty accompanying your device will
be voided if you tamper with either the system software or the hardware.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
Wiki
Official LineageOS Wiki: http://wiki.lineageos.org/cancro_info.html
Installation
First time LineageOS 14.1 installation on your Xiaomi Mi3:
Read the official Wiki page
Flash a custom recovery via Fastboot
Push GApps (arm) and the CM 14.1 zip to your device
Boot into Recovery
Perform factory reset
Flash the LineageOS 14.1 zip from SD card
Flash GApps from SD card
Reboot
Upgrading from CyanogenMod 14.1 :
Download the experimental migration build to your SD card
Download the latest lineageOS nightly build to your SD card
Boot into Recovery
Flash the experimental migration build
Reboot and wait until it's ready
Reboot into Recovery again
Flash the nightly build
Reboot
Supported devices
Mi3w
Mi4 (WCDMA)
These devices are supported, but the maintainer WILL NOT fix bugs that are reproduceable just in those devices
Mi4 LTE
Downloads
Download nightly : https://download.lineageos.org/cancro
-----------------------------------------------------------------------------
Google Apps (arm): http://opengapps.org/?api=7.1&variant=nano
Su addon (arm): https://mirrorbits.lineageos.org/su/addonsu-arm-signed.zip
Su remover (arm): https://mirrorbits.lineageos.org/su/addonsu-remove-arm-signed.zip
Reporting bugs
Model (Mi3 / Mi4 / Mi4 LTE)
DO NOT report bugs if you're running a custom kernel
DO NOT report bugs if you've modifies system files
DO NOT report bugs if you've installed xposed and/or other mods
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues or bugs reported in the lastest 5 pages of this thread. Any bug not reported in the bug report format below may be ignored.
Code:
Phone Informations
* Phone model (Mi3 / Mi4 / Mi4 LTE)
* LineageOS version
* Gapps version
What you did:
* Wipe data: y/n
* Upgrade from previous official LineageOS build: y/n
* Restore with titanium backup: y/n
You're using (if yes write which one) :
* Task killer
* Phone cleaner / Battery enhancer apps
* Non-stock kernel
* Modified kernel settings
* Other mods
Bug info:
* Last version it worked on
* Repro steps
F.A.Q.
I get error 7 while flashing this rom, what does it mean?
Read what the recovery says: "You're running on an unsupported (Kitkat) baseband". In order to flash the lastest CM builds you must have Miui MM baseband and partition layout installed. Visit http://bit.ly/cancroCMBaseband to learn how to update these
ROOT! ROOT! Give me root or i'll die!!! Where root is???
Root has been removed from LineageOS builds, to allow people who are not interested in root access to enjoy apps such as PokemonGo or banking apps. A zip to re-enable root will be provided next days. Other packages such as SuperSu, magisk or others are not supported and might cause problems
Why no nightly today?
Build failed. Check again tomorrow
When do I have to wipe data?
You must wipe data only when you're switching from another rom or migrating to Snapshot branch from Nightly and vice versa. You don't need to wipe data when you update in the same release channe (this applies to 13.0 -> 14.1 upgrades too)
Will you add <insert awesome feature here>?
I won't. If you write it, submit a commit to gerrit, where it will be reviewed.
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[OFFICIAL][7.1] LineageOS 14.1 - Xiaomi Mi3 [cancro], ROM for the Xiaomi Mi 3
Contributors
linuxxxx
Source Code: https://github.com/lineageos
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Testing
Created 2017-01-31
Last Updated 2017-01-31

nice

Oh...wow...Finally...!!

Finally , it's here ! [emoji14]

Great sir. Has anyone tried it? Is it stable to use as a daily driver?

ROM OS Version: 2.3.x Gingerbread

SwastikAcharya said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
you know its nougat right

Sooo nice.
I'm testing on my Mi3 with a data-only SIM card. Having done experimental->23 nightly->30 nightly
Till now I haven't found bugs, just some lags.
No themes, but I can live without
I know I can't say anything about calls, BT issues and so on, but LineageOS just made my Mi3 "new" again

Found bug on audio fx, its so disturbing me -_- i want a pure lineage os, not custom equalizer

SwastikAcharya said:
ROM OS Version: 2.3.x Gingerbread
Click to expand...
Click to collapse
lol... Don't know how many days it will be there in the thread! @linuxxxx don't really look in the thread much.

Any chance this ROM suppory LTE mode switch preference in the setting?

help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
It took ~10 mins for me and then worked. Initially I also though it is stuck but finally loaded.

Yeah same here

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
Yes, this happens to me as well. It's kinda misleading BUT behind the scene it is running alright. It took a while to finish (there is not even a success message being shown). Just continue to flash GApps or reboot to system when its done. Should be fine. It works for me.

sunil_defy said:
help requested.
struck at
detected filesystem ext4 for /dev/block/bootdevice/by-name/system
Click to expand...
Click to collapse
The Flashing time took a lot (about 20-25 min) because all lineage os builds are signed with a key. That's why
So please wait patiently and enjoy lineage os.

Excellent build. Good battery life
1. Wallpaper scroll doesn't work
2. Bluetooth telephony didn't work
3. Browser closes sudenly

is there a fix for battery counter dropping drastically after a reboot. Otherwise extremely happy with the ROM .

xdarkstar said:
It's there a fix for battery counter dropping drastically after a reboot. Otherwise extremely happy with the ROM .
Click to expand...
Click to collapse
As of now i don't think so ..I asked shivam sir and he was also unable to find the reason:crying:This problem is the reason I am not using any LOS Roms and using AOSP roms instead

reality1234 said:
As of now i don't think so ..I asked shivam sir and he was also unable to find the reason:crying:This problem is the reason I am not using any LOS Roms and using AOSP roms instead
Click to expand...
Click to collapse
Same reason here + ZX kernel

[ROM][OFFICIAL][gts4lvwifi][10] LineageOS 17.1

-- bit more friendly stock -> lineage instructions --
1. Unlock the bootloader
- Connect to WiFi network
- Enable OEM Unlock in developer options
- Turn off the tablet
- Boot to download mode manually by plugging in USB and holding all the buttons for few seconds
- Follow instructions on the screen
2. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
3. Flash custom VBMeta image ( https://dl.twrp.me/gts4lvwifi/vbmeta.tar.html ) in Odin ( use AP slot )
4. After flashing VBMeta, boot to stock. It'll likely ask you to wipe data, if so do that
5. Connect to WiFi network and make sure OEM Unlock in developer options is still checked
6. Now you can flash TWRP ( https://dl.twrp.me/gts4lvwifi ) in Odin ( use AP slot once again ), for convenience you can hold volume up while flashing it so that you boot to recovery right after it's flashed
7. Install Lineage × whatever else you need ( gapps, addon-su, ... )
8. Format data
9. Reboot ( make sure to not install TWRP app when TWRP asks you to )
---
Also Odin download for those who can't find it on their own https://build.nethunter.com/samsung-tools/Odin_3.13.1.zip
( sha1sum 1057496afa34bfdf7e77caf0b99207dca77fcb2d )

Builds 20200824+ depend on Android 10 firmware, and thus from now on the recovery will abort the installation if you're still on Android 9 one.
You can update the firmware by flashing following Odin package: https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXS2CUA3.
After the firmware update you should be able to flash newer builds.

Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds :
https://www.androidfilehost.com/?w=files&flid=299579
http://downloads.codefi.re/jdcteam/luk/lineage-17_0/gts4lvwifi
https://sourceforge.net/projects/luk-lineageos/files/gts4lvwifi/lineage-17.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
XDA:DevDB Information
[ROM][UNOFFICIAL][gts4lvwifi][10] LineageOS 17.0, ROM for the Samsung Galaxy Tab S5e
Contributors
LuK1337
Source Code: https://github.com/LineageOS
ROM OS Version: Windows 8 Mobile
Version Information
Status: Testing
Created 2019-09-24
Last Updated 2019-09-24
Click to expand...
Click to collapse
Wow!!!! Thanks op!

andre0005 said:
Well.. that was faster than expected. Thank you very much for your dedication.
Which gapps are you currently using or recommending? Opengapps doesn't seem to have gapps for 10 yet.
Also any special instructions for flashing when coming from your previous los16 rom?
Click to expand...
Click to collapse
Apparently https://sourceforge.net/projects/opengapps/files/arm64/beta/ works.

I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.

That was fast. You got me

inka$$o said:
I had the opportunity to test the image yesterday as kind of a preview. After killing the setup wizzard, it worked really great. The switch from LOS 16 to 17 was easy.
Rooting had to be done with magisk (current stable was fine) as Luk told me that superSU probably won't work.
I eventually reverted to LOS 16 mainly because of personal discomfort. No Trebuchet, some settings dialogues not (yet) ported and Titanium Backup did not work (there were no buttons displayed - could not even press the problems? button as it was not there ). I personally decided to wait a bit until I will return to LOS 17 on that device.
Click to expand...
Click to collapse
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?

There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
I also can't install apps, probably because no access to SD card.

suzook said:
There is an issue with twrp decrypting storage on Los 17. Is this more than likely a twrp issue?
Click to expand...
Click to collapse
TWRP issue.

LuK1337 said:
TWRP issue.
Click to expand...
Click to collapse
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.

suzook said:
Apps won't install from play store also
Unfortunately I can't download anything, since SD card is encrypted. Guess I will go back to Los 16. Thanks anyway op.
Click to expand...
Click to collapse
>Apps won't install from play store also
Format data; reboot and they should install fine now.

LuK1337 said:
>Apps won't install from play store also
Format data; reboot and they should install fine now.
Click to expand...
Click to collapse
Will give it a shot.

andre0005 said:
Did you perform a full wipe before flashing?
Also how did you 'kill' the setup wizard?
Click to expand...
Click to collapse
I started with my device running LOS16 already. If you're coming from stock, you should stick to the instructions for the LOS16 installation in the other thread - just use instead of LOS16 image the LOS17 image.
If you have already LOS16 on the device:
-> Boot to Recovery
-> install LOS 17 image
-> if desired stable Magisk for rooting
-> if desired these openGAPPS (was told to use them - they worked fine)
-> FORMAT data (wipe doesn't do the trick, as it doesn't do it when installing LOS 16)
After facing the problem with the setup wizzard I was told to simply delete it.
Boot to Recovery, mount system partition and open the terminal.
The command is:
rm -rf /system/priv-app/SetupWizard
After that, the wizard is gone and you can boot to system. You'll have to manually go through the settings to set up everything though.

Are there any launchers other than the included that work with the new gesture navigation?

andre0005 said:
Are there any launchers other than the included that work with the new gesture navigation?
Click to expand...
Click to collapse
No.

OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.

suzook said:
OK, got it set up properly with the format data. Just a couple things. Black theme doesn't work, and immersive mode force crashes settings app when trying to access it. Not complaining, just letting you know.
Click to expand...
Click to collapse
Use a standalone dark theme toggle, not 'Style' one.

@LuK1337 Thanks a lot for the build. Time to buy the Tablet.
One Question:
 @LuK1337 or anyone, are the corners rounded like that of the stock ROM or are the corners sharp?

[ROM][10.0.0_r41]LineageOS 17.1 for Moto E5 Play (James) + Recovery [64Bit]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot ofoxSAR.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
-- OR --
fastboot boot twrp-james-bootonly.img (ONLY BOOT IT!)
-- then --
Wipe -> ADVANCED -- select system + vendor -> SWIPE TO WIPE
reboot bootloader
fastboot boot the recovery of your choice again
-- then --
Format data, Wipe cache & dalvik-cache
Flash ROM, Gapps 10 arm64 pico together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 Play (James) XT-1921
RECOVERY: twrp-james-bootonly.img
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/HyperTeam/android_kernel_motorola_msm8937/tree/lineage-17.1
CREDITS:
LineageOS
Team Hyper
CAF
Special thanks to @deadman96385 (Sean Hoyt) for donating me a device :highfive:
Special thanks to @SykkNyzz for testing and donating me a similar device :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/brickjungle
XDA:DevDB Information
LineageOS-James, ROM for the Moto E5 Play
Contributors
whodat711, karthick mostwanted, JarlPenguin, electimon, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
Created 2020-11-24
Last Updated 2020-11-24

whodat711 said:
LineageOS is a free, community-built, aftermarket firmware distribution of Android 6, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Audio
Bluetooth
Camera
Display
Encryption
Face unlock
GPS
RIL (VoLTE calls, SMS, Data)
Sensors
Video Playback
Wi-Fi
Known issues:
You tell me the rest
Report bugs:
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel (Ignore):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
DO NO POST BUGS WITHOUT LOGS AND PROPER STEPS TO REPRODUCE THE ISSUE
Follow Instructions Carefully otherwise you will get error :
fastboot boot ofoxSAR.img (ONLY BOOT IT!! TOO BIG TO FLASH!)
Format data, Wipe cache & dalvik-cache
Flash ROM, Gapps 10 arm64 together (Download Gapps from downloads section)
Done-Reboot Now
Enjoy the clean Rom
64bit Downloads:
ROM:
Moto E5 Play (James) XT-1921
RECOVERY: https://www.androidfilehost.com/?fid=4349826312261800880
GAPPS: Gapps 10 arm64
Source code:
ROM: https://github.com/ForkLineageOS/android
KERNEL: https://github.com/HyperTeam/android_kernel_motorola_msm8937/tree/lineage-17.1
CREDITS:
LineageOS
Team Hyper
CAF
@phhusson
Special thanks to SykkNyzz for testing and donating me a device :highfive:
DONATIONS:
Please consider donating if you enjoy my work. It will be used for server expenses, Ty
Paypal donation link: https://www.paypal.me/karthick0698
UPI: [email protected] (do mention device name while donating) PM for any other mode of transaction
XDA:DevDB Information
LineageOS-James, ROM for the Moto E5
Contributors
whodat711, karthick mostwanted, JarlPenguin, electimon, wiktor140
Source Code: http://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Version Information
Status: Alpha
Created 2020-11-24
Last Updated 2020-11-24
Click to expand...
Click to collapse
Great you are great thanks for such a brilliant work you had done.

welcome

im on rjames and fingerprint sensor not working for me + please tell me how to disable the n/a thing

and the "face unlock" uses the back camera and not the front and even if you filp it over and do it , it doesnt work

Thank you so much it all worked like a charm!!!

Thanks, two issues for me XT1921-1 (Comcast)
1. fingerprint sensor is not found
2. face unlock use the back camera instead of the front one
other than those all other works fine.
did try to rebuild lineage using OPs GitHub source, but kept getting this error:
FAILED: ninja: 'out/target/product/james/kernel', needed by 'out/target/product/james/boot.img', missing and no known rule to make it

dogplant said:
im on rjames and fingerprint sensor not working for me + please tell me how to disable the n/a thing
Click to expand...
Click to collapse
you can flash a white background logo.bin to cover the n/a message
GitHub - eriktim/moto-bootlogo: Modify the Motorola Moto Series' boot logo
Modify the Motorola Moto Series' boot logo. Contribute to eriktim/moto-bootlogo development by creating an account on GitHub.
github.com

Thanks for this! No issues installing on the XT1921-3. So far I'm really pleased with the performance over stock, so much snappier, and this is much better than the unofficial 15.1 build from a couple years ago. Using gapps-pico.
XT1921-3 (T-mobile)
Issues:
The Camera works, with some issues. Not dealbreakers for me, because if you care about cameras this is absolutely not the phone to be using anyway.
Overall, I believe the front a rear cameras and lights are reversed, which is why the face unlock is the rear camera. Camera shows this as well - prior to taking a photo, selfie mode will show the actual photo (i.e. not mirrored), and the rear camera will always show a mirrored photo. On both stock and open camera, mirroring selfies will only mirror photos taken from the rear camera.
The camera also does not rotate correctly. If you rotate the photo 90 degrees, the image will rotate 180 degrees.
Flashlight only works on the front light.

Getting stuck at face unlock it wont let me bypass the face unlock setup

Any update on this rom please

would love to see a rom with low memory flag enabled, so we can run it as an android go. this phone has only 2G memory, I have opengapp pico, and it already using 1.5G memory

Please help us at @whodat711

Issue I ran into:
- Camera is reversed. It is difficult to get past the initial setup that really wants to use face unlock and getting it to work when you have to use the rear camera is difficult. It also uses the wrong camera when you pull up the camera app. I don't see a way to get it to use the opposite camera.

Hi to everyone and thank to whodat.
I am new on this area but i want to try to install this rom on my device.
Someone could point me to a manual or detailed instructions for beginners?
Also , is inevitable to flash Gapps? i was thinking in obtain all my apps from F-droid

pepito1312 said:
Hi to everyone and thank to whodat.
I am new on this area but i want to try to install this rom on my device.
Someone could point me to a manual or detailed instructions for beginners?
Also , is inevitable to flash Gapps? i was thinking in obtain all my apps from F-droid
Click to expand...
Click to collapse
Instructions at OP

Have new build but having trouble uploading to AFH
will post on tg

download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!

whodat711 said:
download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!
Click to expand...
Click to collapse
I guessed the camera is fixed ,yeeepiieee

whodat711 said:
download 64bit TWRP (Too big to flash to recovery partition)
twrp-james-bootonly.img
drive.google.com
fastboot boot twrp-james-bootonly.img
lineage-17.1-20210201-UNOFFICIAL-james.zip
drive.google.com
wipe -> advanced -> select system + select vendor
wipe -> format data - type yes
reboot bootloader
fastboot boot twrp-james-bootonly.img
flash rom
flash gapps (optional)
reboot system
setup ROM
Enjoy!
Click to expand...
Click to collapse
WhatsApp unable to play video

Doing new build now , hopefully fixed that issue
Also including my custom kernel in build now.
Will update links when build is done.

[ROM][OFFICIAL][ginkgo][11] LineageOS 18.1 for Redmi Note 8 / 8T

Reserved

Does encryption work?

no microg or signature spoofing support i suppose ???

darkherman said:
Does encryption work?
Click to expand...
Click to collapse
Tested, doesn't work. It doesn't encrypt by default on first boot and manual encryption in settings seems to soft brick it. Recovery RescueParty comes up after several reboots I had to format data again.

I'm running miui 11 global on redmi note 8, should I install miui 12 beta before flashing the rom?

I have flashed twrp 3.4 for redmi note 8|8T is it ok for this or or should I flash some other twrp instead?

DarkJoker360 said:
Reserved
NOTES
* CTS is passing by default
* I have no intention to apply for official, however I included ota updates to provide the same experience of 17.1, hope you can understand.
Click to expand...
Click to collapse
Hey thanks for your amazing work. Does this mean that ginko will never have official LoS 18?

DarkJoker360 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's not working :
You tell me
Instructions :
Download the latest build and gapps
Reboot to recovery
Flash the latest build and gapps
Reboot
Downloads :
Builds : https://sourceforge.net/projects/darkjoker360-developements/files/Xiaomi/Redmi Note 8/ROM/Android-11/LineageOS-18.1/
Google Apps : https://wiki.lineageos.org/gapps.html
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
LineageOS, ROM for the Redmi Note 8/8T
Contributors
DarkJoker360
Source Code: https://github.com/LineageOS
Device source code: https://github.com/ginkgo-dev
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
Based On: LineageOS
Click to expand...
Click to collapse
Overall very good ROM

is there AOD on this ROM when notifications are received?

Thanks for the rom. but modded games do not work on all android 11 roms.
what is the solution to this problem, help please.

What gapps to install, is there a link?

There are some janks in animations, I fixed already and while waiting the newer update here is a workaround :
Open vendor/build.prop and change debug.sf.latch_unsignaled from 0 to 1
Save and Reboot
Click to expand...
Click to collapse
Also encryption is a common bug in Android 11 for almost all.

Wake up by proxymity sensor not working for me

what about magisk

otto81709 said:
what about magisk
Click to expand...
Click to collapse
I tried it out. It goes right into fastboot mode after installing the latest canary magisk build.

Thanks for the rom. but modded games do not work on all android 11 roms.
what is the solution to this problem, help please.

DarkJoker360 said:
There are some janks in animations, I fixed already and while waiting the newer update here is a workaround :
Also encryption is a common bug in Android 11 for almost all.
Click to expand...
Click to collapse
there is an official android 11 rom for ginkgo that supports encryption, I'll pass you the link to the source?

New LineageOS 18.1 update !
* Synced with latest LineageOS 18.1 source code
* Boosted audio output
* FIxed Ui lags
* Removed AOD
Click to expand...
Click to collapse
Donations
NOTE: You can update from updater app.

Thanks to @DarkJoker360 for great, amazing battery, performance, all time best lineage rom .
and any idea to disable of FP vibration and can add double tap to screen off.

[ROM][OFFICIAL][gts4lv|gts4lvwifi][12] LineageOS 19

LuK1337 said:
LineageOS is a free, community built, aftermarket firmware distribution of Android 12, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project, with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub organization. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the changelog for a full list of changes & features.
Instructions :
https://wiki.lineageos.org/devices/gts4lvwifi/install
Downloads :
https://www.androidfilehost.com/?w=files&flid=332252
http://downloads.codefi.re/jdcteam/luk/lineage-19_0/gts4lvwifi
https://sourceforge.net/projects/luk-lineageos/files/gts4lvwifi/lineage-19.0
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel, or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /sys/fs/pstore/console-ramoops and /sys/fs/pstore/dmesg-ramoops-0. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Click to expand...
Click to collapse
Omg, thank you!

Amazing! Thank you!

Yes!

Installed and runs just fine Just interestingly, after flashing nikgapps core there were no Gapps after booting... But flame gapps work ok
Thanks the Dev for bringing A12 for us! 🤝🏻

Lord Sithek said:
Installed and runs just fine Just interestingly, after flashing nikgapps core there were no Gapps after booting... But flame gapps work ok
Thanks the Dev for bringing A12 for us! 🤝🏻
Click to expand...
Click to collapse
Do i need to format data of only with factory reset i can flash

apokit said:
Do i need to format data of only with factory reset i can flash
Click to expand...
Click to collapse
I wiped and formatted everything except MicroSD card, then flahsed latest firmware available in Odin (https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXU2DUL1), then flashed all necessary stuff in TWRP

Brightness slider not showing on notification center even set to show always
LineageOS version: 19.0
LineageOS Download url: https://www.androidfilehost.com/?w=files&flid=332252
Gapps version: MindTheGapps 12 arm64 http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Did you--
wipe: yes, cache system data
restore with titanium backup: no
reboot after having the issue: yes
Are you using--
a task killer: no
a non-stock kernel: no
other modifications: Lineage Recovery

whiteyaksa said:
Brightness slider not showing on notification center even set to show always
LineageOS version: 19.0
LineageOS Download url: https://www.androidfilehost.com/?w=files&flid=332252
Gapps version: MindTheGapps 12 arm64 http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Did you--
wipe: yes, cache system data
restore with titanium backup: no
reboot after having the issue: yes
Are you using--
a task killer: no
a non-stock kernel: no
other modifications: Lineage Recovery
View attachment 5526051View attachment 5526049
Click to expand...
Click to collapse
Don't report missing features, I'm well aware they're missing.

whiteyaksa said:
Brightness slider not showing on notification center even set to show always
Click to expand...
Click to collapse
Brightness slider is available on mine.
Edit:
I dont have wifi available though. I click wifi button and it switches off immediately. Im going to install via odin rather than twrp and if that doesnt work, Ill post a bug report with logcat.
Fixed the broken wifi by flashing https://github.com/luk1337/gts4lv-fw/releases/tag/T720XXU2DUD7 this vb meta data in AP slot of ODIN.
@LuK1337 : los19, EXCELLENT!! WHOOHOO!! Thanks buddy!!!
If you want any testing, let me know...

Can you please release Lineage Recovery 19.0? Thank you

whiteyaksa said:
Can you please release Lineage Recovery 19.0? Thank you
Click to expand...
Click to collapse
Not sure if it makes sense to release recovery images separately, but if you want up-to-date recovery (that also passes signature check for these builds), then simply toggle "Update recovery" in system updater preferences, and it should automatically flash it.

LuK1337 said:
Not sure if it makes sense to release recovery images separately, but if you want up-to-date recovery (that also passes signature check for these builds), then simply toggle "Update recovery" in system updater preferences, and it should automatically flash it.
Click to expand...
Click to collapse
the updater crashes when i save this option

whiteyaksa said:
the updater crashes when i save this option
Click to expand...
Click to collapse
Oh? Can you take a logcat?
EDIT: Actually nvm, it's probably just SELinux anyway. You can set do adb root + adb shell setprop persist.vendor.recovery_update true instead.

LuK1337 said:
Oh? Can you take a logcat?
EDIT: Actually nvm, it's probably just SELinux anyway. You can set do adb root + adb shell setprop persist.vendor.recovery_update true instead.
Click to expand...
Click to collapse
I did this and reflashed the LOS 19.0 image, restart to the recovery and it's still 18.1

Hi, thank you for amazing work. In portrait mode quick settings looks like this. Any suggestions.
Your browser is not able to display this video.

Forgive me the stupid question but can I do a dirty flash from the official lineage 18?

XRed_CubeX said:
Forgive me the stupid question but can I do a dirty flash from the official lineage 18?
Click to expand...
Click to collapse
You should be able to. Flash L-OS and gapps straight afterward. Optionally magisk if you need so

Ok thanks for the tip

XRed_CubeX said:
Ok thanks for the tip
Click to expand...
Click to collapse
Remember to take a backup first and update your firmware

Develop Bugs

welcome