Question Moto g60s not booting - Moto G40 / G60

I haber no idea what to do as this is my only phone. I tried to root it but I am a begginer and now it won't boot. It turns on, then flashes the logo then a message appears saying "No operating system found. The phone will not boot. Press power to restart". What can I do here? Thanks for any help

Related

Asus Zenfone 2 Dead bot blinking error

i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
JB_jeet said:
i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist.
Please wait while I connect you to the appropriate forum (below) where your device experts can be found:
> Asus ZenFone 2 > ZenFone 2 Q&A, Help & Troubleshooting
For what it's worth, I think your stock recovery is still functional even with the flashing exclamation point. All you will need to do is download a full version of the stock ROM, rename it to MOFDSDUPDATE.zip, place on an SD card and boot the phone into recovery.
Hope this helps, and good luck!
JB_jeet said:
i rooted my zenfone 2 and the applied the system update by mistake. and my phone got stuck in boot (the loading loop just keeps on rotating). Opening the recovery displayed an error message with a dead/sleeping bot ..but i was able to get into the recovery by pressing the power button and vol up key fr a short time. this was till yesterday ..today when i tried to switch the phone on (normal boot, not recovery) ... the asus logo screen appeared .. but after that instead of the loading screen i got a sleeping bot screen with a red exclamation mark that keeping blinking every few seconds ... i tried to open recovery .. but again the same blinking dead bot screen with "error" written. ... plz help me ! is it possible to recover my phone ?
Click to expand...
Click to collapse
this is what I used for the very same
problem that I had.Hope it helps.
2.1) Entering Recovery mode
Steps:
CLICK TO HIDE CONTENT
Turn off you Zenfone 2
Hold Power button + Volume up
When the phone is vibrating release power button
You can select Normal boot or Recovery boot by pressing Volume up/down button.. To enter Recovery mode choose recovery boot.
Then you will see sleeping android robot. Press power button + Volume up and release the buttons.
You are now in Recovery mode
NOTE: After rooting many users are not able to enter recovery..The dead android bot with error appears...To enter recovery follow these steps:
Method 1:
CLICK TO HIDE CONTENT
Enter recovery as you normally do
When you see a dead android bot with an error press and hold power button, then (while holding power button) quickly press Vol up and release and then release power button..
NOTE: IF METHOD 1 FAILS try METHOD 2 it will definitely work
Method 2:
CLICK TO HIDE CONTENT
Connect your device and open adb
In adb Type
Code:
fastboot erase cache
I m stuck on sleeping bot screen with a red exclamation mark that keeping blinking every few seconds … i tried to open recovery .. but again the same blinking dead bot screen with “error” written. and while entering in recovery mode by pressing power and volume+ button, getting “continue to fastboot process. Pls help me
i have the same problem after a mistake in the recovery a blinking dead bot and i not can connectet my phone with my pc
please help
http://forum.xda-developers.com/showthread.php?t=3191244
Try this
Envoyé de mon ASUS_Z008 en utilisant Tapatalk
thanks Mael_RadecFR its work now my hero
same thing happens to me my phone not detected by pc PLZ HELP if you fond any solution
Any app not installed Error 26 occured
I had a same blinking problem; tried all the clean up...rebooting with volume up and shutdown...clear cache...restore back to orginal.....nothing worked. Finally I disabled the REMOTE LINK and my phone is back to normal...now disable most of the apps and using only few basic Apps and my ASUS mobile looks working well...hopefully it will last for another few months
Asus zenfone 2 dead bot
To. schorup2013, thank you for your first nethod that works well on getting to recovery mode. But sad to say after formating and wiping partition cache, the boot loop still re occuring with the dead bot. I will be trying your method 2 while searching about adb....

LG-G3(F460L) Secure Boot Error

Hi Guys
So my Friend gave me LG-G3 for and ask me to help him fix it the problem it has is that when press power on button the lg logo appears but with it on the top left there is also a message saying
Secure Boot Error;
Cause: Boot Certification Verify
and after few seconds screens is blacked out and there is no reponce from it this happens every time no matter in which mode you try to turn it on in download mode recovery mode any thing..
Anybody to help me in this regard? Sorry for bad english

Recovery reboot

Hi everyone.
I have a weird problem with my d855.
I have installed the new port we have here for android 7.0.
The problem is now that I've flashed it I can't access recovery.. What happens is this:
I hold power button and volume down. Release when the lg logo shows and then hold again. As per usual.
Instead of twrp I see the green android with the red exclamation sign, then a black screen and the same happens.
What I can gather from the split second is this :
No command.
Supported api 3
Can't mount cache/recovery
That's it.
By the way the system itself work perfectly.. Only the recovery is broken.
Hope you can help me and thanks alot.
You can try flashing the twrp again.

Stuck at "your device has been unlocked" screen, please help me

I unlocked bootloader and wanted to install Magisk with TWRP but it kept giving me Error 1 saying "boot image patched by unsupported programs, please restore stock boot image" so I searched for the boot.img, transfered to internal device of the phone and flash it but I didn't do wipe data and now my phone is stuck in "your device has been unlocked and can't be trusted" message. I tried powering off by pressing the power off button, it goes on black screen for a couple of seconds then gets back to the same message screen, same with trying to enter into recovery mode by pressing power and volumen down button, comes back and gets stuck in the same screen, I tried connecting to pc with usb but doesn't recognize it. I dont know what to do please help me

Motorola One Action Bootloop

Hi, recently i got in a bootloop. I was at the beach, taking pictures with Gcam, and suddenly the phone started locking and unlocking the screen, and after some time it rebooted with a "android" screen. It showed a warning saying my android was corrupted, and gave me the option to try again or factory reset.
I clicked "Try Again" and the phone tryed to reboot, and it is in a boot loop since then. I can start it in fastboot mode, but the device won't be seen by Rescue and Smart Assistant, or by ADB. Yes, i have the USB drivers installed. When i try to enter recovery mode it says "no command", and factory mode just starts the bootloop again. Please someone help me
Managed to get past no command screen, and dida factory reset.

Categories

Resources