Develop Bugs

microsoft voice command

is anyone know where can i buy the program in uk i did try in handango but they said not for sell in this country.thanks

It is not posible outside EEUU, I asked handandgo by email and answer it was forbiden by Microsoft.
Try Fonix software it works really well.
www.fonix.com
Cheers

If you have an XDAII, then you can get a fully working version of it with the official o2 UK 1.72 upgrade. I don't use it very much as I always feel an idiot saying the name, then normally having to confirm it before dialing, when I can just as easily go into speed dial or call history etc.
However, when I have used it it works a treat.
Cheers
Anthony

I use Fonix in the car all the time and its works great for me.
I found that Voice command recognised the contact I wanted 95% of the time, but then didn't recognise me saying 'yes' to confirm it.

In my case, Fonix does not always recognize my 'NO' command... :S
But still it's a great contender for MS VC....
By the way, is there a way to avoid Fonix to change my microphone AGC setting? It always changes it to AGC OFF, thus the recognition gets affected drastically, however when AGC is ON I get 98% success rate!
TIA,
Rayan

what version of Fonix voice dial are you using. I used the first version with my XDA1, this worked wonderfully.
I have found that the 2.0 version doesn't have a UK voice (the us ones are a bit odd). In addition i have noted the recognition does seem poor and it doesn't repeat the contact, just says "your contact"!!
Any ideas / help always welcome!

voice commands
hi,
you don 't really have to buy this software, you can download it probabely from following site: www.suprnova.org

I'm using the latest version (2.0)...
The weird thing is that it does not always change the AGC Setting...
I have not found a pattern, it seems more like random...
:roll:

Voip setting

where i can set voip account for voip calls on wm6 ??

Tak e alook here : http://forum.xda-developers.com/showthread.php?t=303493

thansk a lot

Configured and connected to my voip carrier but whan i call....the other telephone rings, but i can't hear nothing on my p3600.The other phone can hear me! Why?

Same here, I suggest you post it in the other thread.
You shouldn'T have opened this one in the first place.

Which thread to use VoIP problem with Trinity
It seems that this problem (Cannot hear anything but can be heard) is specific to the Trinity. The other forum is about how to configure a SIP account for use with inbuilt VoIP in WM6. On that forum - there are Trinity users talking about their specific VoIP problem as cited above.
As this issue is not one concerning the SIP account configuration, I feel that it deserves it's own thread. How about renaming this thread to VoIP problems with Trinity WM6 delivery 1979 - then we can all get together to share problems about VoIP with the Trinity WM6 ROMS. Perhaps mUn and Lvsw can enlighten us and eventually include fixes in their upcoming ROMS.
I have yet to have a definitive answer from anyone about successfully setting up VoIP and getting it working consistently on the Trinity. If most users can indeed do this - the problem is isolated to a few dunces like me. however - as nobody has confirmed a working VoIP in WM6 for Trinity - I think a Trinity specific problem that merits a thread.

nealed said:
It seems that this problem (Cannot hear anything but can be heard) is specific to the Trinity. The other forum is about how to configure a SIP account for use with inbuilt VoIP in WM6. On that forum - there are Trinity users talking about their specific VoIP problem as cited above.
As this issue is not one concerning the SIP account configuration, I feel that it deserves it's own thread. How about renaming this thread to VoIP problems with Trinity WM6 delivery 1979 - then we can all get together to share problems about VoIP with the Trinity WM6 ROMS. Perhaps mUn and Lvsw can enlighten us and eventually include fixes in their upcoming ROMS.
I have yet to have a definitive answer from anyone about successfully setting up VoIP and getting it working consistently on the Trinity. If most users can indeed do this - the problem is isolated to a few dunces like me. however - as nobody has confirmed a working VoIP in WM6 for Trinity - I think a Trinity specific problem that merits a thread.
Click to expand...
Click to collapse
I agree, we've been bouncing this problem around for a couple of weeks now.

nealed said:
It seems that this problem (Cannot hear anything but can be heard) is specific to the Trinity. The other forum is about how to configure a SIP account for use with inbuilt VoIP in WM6. On that forum - there are Trinity users talking about their specific VoIP problem as cited above.
Click to expand...
Click to collapse
There's one-way audio on the Trinity with WM6 internet calling (SIP).
Third-party SIP phones have 2-way audio, but it's always on the speakerphone.

stepw said:
There's one-way audio on the Trinity with WM6 internet calling (SIP).
Third-party SIP phones have 2-way audio, but it's always on the speakerphone.
Click to expand...
Click to collapse
i disagree with that. i've tried several 3rd party sip clients. all have the same behaviour as the wm6 build-in client.

Anyone tried LVSW's 2.0.0.7 - a new hope?

nealed said:
Anyone tried LVSW's 2.0.0.7 - a new hope?
Click to expand...
Click to collapse
Same stuff, one way only...

hi, i have configured image lvsw 2.0.0.7 with sip provider lowratevoip. My problem is no voice from the speaker. Thank best regard Antonio

albertazzi65 - did you try the fix that lvsw suggested in his post:
VoIP FIX!!!!
Remove the values:
[HKEY_LOCAL_MACHINE\Comm\RTC\AdapterTypes]
"1"=dword:00020001
"2"=dword:00020002
I would be curious to see if after flashing the 2.0.0.7 version of the ROM and applying this fix it works?
My next tests to get VoIP working were going to be : 1. Flash 2.0.0.7 2. Apply the above fix 3. Replace rtcdll.dll with this one: http://forum.xda-developers.com/attachment.php?attachmentid=39424&d=1179658323 at each step I would check the functionality of VoIP to see if at any stage it works! If you could try (as you've already flashed to 2.0.0.7) - that would help a lot.

nealed said:
albertazzi65 - did you try the fix that lvsw suggested in his post:
VoIP FIX!!!!
Remove the values:
[HKEY_LOCAL_MACHINE\Comm\RTC\AdapterTypes]
"1"=dword:00020001
"2"=dword:00020002
I would be curious to see if after flashing the 2.0.0.7 version of the ROM and applying this fix it works?
My next tests to get VoIP working were going to be : 1. Flash 2.0.0.7 2. Apply the above fix 3. Replace rtcdll.dll with this one: http://forum.xda-developers.com/attachment.php?attachmentid=39424&d=1179658323 at each step I would check the functionality of VoIP to see if at any stage it works! If you could try (as you've already flashed to 2.0.0.7) - that would help a lot.
Click to expand...
Click to collapse
The problem is that DLL's used in Trinity roms are from different devices, and as I was explained, drivers for Trinity's audio are different. Haven't tried to replace dll, but no luck with registry settings...

OK. Flashed 2.0.0.7 ROM. Replaced DLL. Configured SIP. Tried a call. I could hear the person I was calling. the sound was very faint and coming from the main speaker. There was also a half second delay.
(I could be heard clearly).
I then tried the registry fix. Now there is just a slight interference noise coming from the main speaker - like a bad phone line - but no voice from the other end. Put the registry keys back - still the same.
Conslusion - I once made a successful two way call through my trinity's phone earpiece. Only once though. This time I got one successful 2 way call - with crappy sound through the main speaker.
This is not progress, but it's clear that the Trinity is capable of it.

nealed said:
OK. Flashed 2.0.0.7 ROM. Replaced DLL. Configured SIP. Tried a call. I could hear the person I was calling. the sound was very faint and coming from the main speaker. There was also a half second delay.
(I could be heard clearly).
I then tried the registry fix. Now there is just a slight interference noise coming from the main speaker - like a bad phone line - but no voice from the other end. Put the registry keys back - still the same.
Conslusion - I once made a successful two way call through my trinity's phone earpiece. Only once though. This time I got one successful 2 way call - with crappy sound through the main speaker.
This is not progress, but it's clear that the Trinity is capable of it.
Click to expand...
Click to collapse
hi, pass1 ok, pass 2 ok, pass3 ok..... call voip no voice to the speaker.

It should work on the trinity because if you use a software like I have done with SJPhone, it works. You can hear your correspondant and he can hear you. The only thing is taht it works on the speaker, so you can use a earphone bluetooth or not and then it works fine.
I have tried and I have the same issue as everyone with WM6 IP phone and no problem on SJPHONE with WM6.

Yes - but the whole point is that it is integrated in the ROM and integrates with the phone a lot better. (As soon as I am at home on WiFi - my calls are VoIP routed). Thanks anyway!

Trinity VOIP no sound problem SOLVED
did a bit of research in the forum. Here's my solution.
Trinity with 2.0.0.7 ROM, SIP conf tool v2.0.1.
Downloaded http://forum.xda-developers.com/attachment.php?attachmentid=39424&d=1179658323
Switched off VOIP and Wi-Fi, replaced the above file in \Windows folder, softreset and here we are, loud and clear sound from the external speaker using VOIP. Hope this helps anyone

But no fix for the internal speaker? Oh well can't have everything.

FM-radio software mutes when switching channels.

I have a problem: When switching channels the sound of my fm-radio mutes. The sound comes back when I make us of one of the buttons.
This is really anoying if you are a channelskipper like me...
Am I the only one with this problem?
Does anybody knows what causes it and how to solve it?
Many thanks in advance..

yo dwaaz,
i have the same problem with my MDA Compact III, but it doesnt bother me s much. i just noticed its there and took it for granted. would love to solve it though.
Anyone knows whats up?
T

I do have a life also..
Tnx for your quick respons,
I know it's not the most important thing in my life, but it's really not userfriendly, don't you agree...
I use my radio reguraly, and I know it's something with software...
A hard reset will fix it, but it returns within a few days.
At one point I noticed the occuring of this problem. I was listening to my radio when I received an call.
Without answering the call I pulled out the headset to answer it with the phone to my ears. When I finished the call the problem with the fm-radio returned.
I'm using this software:
1. Spb Phonesuite
2. Spb Mobile Shell
3. Spb Pocket Plus
4. Smartmovie
5. Betaplayer
6. Sprite Backup
This is my standard configuration.
Any similarities with your software profile?

Another reply
Noticed that if you use the predefined stations(and the sound works) you can choose other stations without any problems.
When the sound is muted(due to the problem) this will not work. Also channelsearch(not preset autosearch) doesn't work. It won't find the stations
I saw WM6 is released. Maybe the problem will be fixed with this update.
Or does anybody has a fix? Am I (with a few other users) the only one with this problem?

Maybe this will work?
I saw an fm-radio app for an Eten device.
http://msmobiles.com/news.php/5193.html
Will this one work? It uses tmc

Hello dwaaz,
have you downloaded the software? The Link to ms mobiles works but when I push the download link i only get error!
Have a nice day

Problem with browser
This link should work.
I tried it again today.
http://x.msmobiles.com/portal/images/phones/eten/radio.zip
Let me know if the download works.

hello dwaaz,
i only get "HTTP Error 404 - File or directory not found."
Please download and mail it to me.
Great thanks

Your email is not public, please let me know so I can send it to you.

Hello dwaaz,
i sended an private message to you.
Have you / or anybody else testet the software on an xda orbit? Does it work?
Have a nice day

FM radio problem partially solved?
I discovered something.
The problems with the radio only occurs when you have disabled the sound for "Events(warnings, system)" in settings/personal/ sound en messages.
In my case, when I enable these sounds (anoying screen taps etc.) the problem is gone.
It looks like the system needs a sound at the end to be able to switch the channels.
Kinda weird isn't it?
Regards,
Dwaaz
PS. I know it's not caused by any third party software, because there isn't any on it.

this message is for nothing. I had problems with my connection en post the same message twice.

Has anyone been able to extract the radio software?

VOIP bug in wm6 ( Trinity ver)

There are alot posts and threads about SIP calling with a trinity and none of the conclude, Is there anyone that works on fixing the issue with sip internet calling for trinity ?
I speak of the issue of not hearing the other recipient.
OR is anyone that has installed a rom with WM6 on a trinity and SIP works fine for him ?

firiel said:
There are alot posts and threads about SIP calling with a trinity and none of the conclude, Is there anyone that works on fixing the issue with sip internet calling for trinity ?
I speak of the issue of not hearing the other recipient.
OR is anyone that has installed a rom with WM6 on a trinity and SIP works fine for him ?
Click to expand...
Click to collapse
Well my friend I have had a similar problem, but when I replaced the dll file as it was mentioned on the specified thread....with Resco explorer (could not do it with the standard file explorer of windows...), it worked OK. Sometimes however you have to try a couple of times to get a clear line, but I think this is an issue of the traffic you have on your WiFi ( I only use it with WiFi..). Also the voice you listen back is a bit faint, but with the headset you get in the purchase box of the P3600, problem is solved. Follow the instructions as they say and you will be fine!

SIP works fine for me, except for the fact that there's just not enough bandwidth for clear ulaw, and we need g729 or gsm for any kind of viability...

I've noticed the in call volume is very faint as well to the point of being unusable...
Is there a registry hack we can apply to change this?
Using Mun.s TE. CHeers

Callers can't hear me

So recently I've been having this weird issue where callers call and I'll answer but they can't hear me. It happens when I call out too. I'm not using any headsets or anything, but it seemed like it started happening when I started turning on bluetooth and leaving it on. But if I have my headset on, that part works fine, they can hear me. I had a custom rom that I cooked myself that seemed to work fine until then.
So I figure I'd ditch my own rom thinking maybe I screwed something up while cooking it, so now I'm using PDAVIET DV's most recent rom. I tested it all yesterday and it seemed fine, but then that night I got a few calls that couldn't hear me again.
This morning things were fine again, after I shut it off then back on. I made a lot of calls out and in from another cell phone, and it worked fine. Then while I was waiting for a phone interview, it didn't work again. Is anyone else having this issue? Or does anyone know why it's happening?
I'm starting to think may it's a sleep issue, because the only thing my phone did in the time between my this morning's testing and the phone interview, was it sat idle in standby mode.
Any Ideas?

Which radio are you using and who is your carrier?

What OS are you using? Does a soft reset fix it?

Zzan said:
Which radio are you using and who is your carrier?
Click to expand...
Click to collapse
1.54.30.10 AT&T
ai6908 said:
What OS are you using? Does a soft reset fix it?
Click to expand...
Click to collapse
My own custom WM6.1 19209 rom, but also happens on DVH 19701 also. Soft reset doesnt seem to help, but power off, and back on does help until phone goes back to standby.

bjevers said:
I just realized I have a sound issue also. I almost always use my bluetooth headset, but yesterday I tried just talking on the phone and the other person could not hear me. I reset the phone and it worked again, but only for a while. I noticed though that when it stops sending my voice to the other person, I can still hear myself in my earpiece. I even loaded Voice Recorder after it quit sending my voice over the phone and it recorded my voice just fine, so I know this is not a hardware issue. Has anyone else experienced this?
EDIT - I did a soft reset, and it didn't fix the problem. I disabled 3G, soft reset, and it worked again for now. Could this be radio related?
EDIT 2 - Disabling 3G wasn't the answer. I did that again and it didn't work this time. Might try a different ROM and see if the issue persists.
Click to expand...
Click to collapse
sniveri said:
This sound issue appeared to me after I installed google maps or new dialpad. I can call to people but after I while talking sound is fading and in the end others can not hear me but I can hear them. Soft reset helps for a while but this issue appears again in next call after few minutes.
Click to expand...
Click to collapse
bjevers said:
Here's what I have installed:
Arcsoft MMS 5.0.31.11
Total Commander
Hexic
Touchpal
Coreplayer
Memmaid
Garmin Mobile XT
SiriusWM5
moBlue
HTC Album
HTC ConnectionSetup
HTC Voice Recorder (installed to test that mic was still working)
Listpro
Kyphur Comm Button Toggle Fix
Live Search
Mortscript
Newsgator Go
Resco Radio
Schaps Advanced Config
SKTools
SPB Suite (Diary, Mobile Shell, Phone Suite, Wallet, Weather) All newest versions
Sprite Backup
Vito FunContact
Windows Live 10.6.0034.0800
I removed Google Maps and SRS WOW after reading others posting in the thread that caused them problems. I have not been able to test if it is fixed yet.
Click to expand...
Click to collapse
Ok just consolidating our issue into my original thread from last week.
I've resorted to not installing all my usual software, and only have this installed so far:
Schap's 2G Dialer
Schap's Advanced Configuration Tool
6 Button Comm Manager
HTC Home Plugin
ELF Calculator skin
Arcsoft MMS 5.0.31.11
HTC Connection Setup
no2chem nueLED
And so far (for two days) I haven't had any issues... here's the software I have yet to install that I usually install:
ATIFix
Cyberon VoiceCommander or MS Voice Command (thought it was one of these but it turned out not)
GoogleMaps
MS Office 2007
WindowsLive10.6.0034.0800
SRS_WOWHD_bt_fixed
TCMPv0.81
FlashVideoBundle
I was thinking maybe it was because of bluetooth being on or something too.

SRS WowHD do that issue. Download another version of that program and phone will be all right.

Mine has gone all day and it seems to be working. I think it's the SRS_WOWHD_bt_fixed cab like wikiri mentioned.

I have flashed official AT&T-ROM, then hardSPLv7, then PDAViet 19900-rom and after that radio rom 1.47.30.10. Mic works sometimes but most of the time it does not. I do not have any issues with roms no hard-reset or anything else wierd but this mic thing.
My PDA is just repaired and switchboard has been replaced and some other components. They said everything should be working and it is tested.
I have installed only ConnectionSettings.cab and latest live-messenger. Mic does not work on phone calls or when recording something.
So could this still be hardware issue?

bjevers said:
Mine has gone all day and it seems to be working. I think it's the SRS_WOWHD_bt_fixed cab like wikiri mentioned.
Click to expand...
Click to collapse
My phone is doing the same thing.
How do you fix the SRS_WOWHD_bt_fixed cab?
Is it a patch or a setting you can manually change in the Phone.