Develop Bugs

Static/clicking sounds on New Microsoft Voice Cmd Ver.1.5

Does anyone have Microsoft voice command version 1.5? And if you do, with the incoming caller announcement enabled, do you get a static clicking sound on your phone device when you get and incoming phone call? I am using a XDA IIs and have this issue. Is there a work around for this issue? Any help would be greatly appreaciated.
Thanks,
Mike

I too have the problem of sound stuttering.
I've never installed any version of voice command.
Al applications playing sound, like media player or any other music player and even the spoken words from TomTom seem to suffer from this.
Since all WAV/MP3 audio seems te suffer from this I gather it must be a CODEC issue of some sort, probably caused by installing some application that has overwritten system files.
Does anybody know a way to solve this ?
It does not seem to occur after a hard reset, I havent tried reinstalling applications one by one to find the culprit, I just restored a Sprite backup.

Yes, I've got the same problem... I just upgraded to VC1.5, and the clicking is only on the announcement of incoming calls... all else seems fine.
Treo

same here with my pda2k.

I have the same issue.
To solve that, Just disable this function.
Tap at start >setting >personal >voice command
at Phone option disable "Announce incoming calls"
I think version 1.5 has so many option that you can select more that the old one.
Voice command over bluetooth is still not work.

I'm afraid this is a more general problem (see earlier threads). There are also problems with WM10 and GPS. I've found that WM10 is OK when No other programm is running. GPS is a larger programm and continues to give voice problems. Maybe the problem can be solved if we could increase the working memory. Who has a suggestion?

I know un checking that option will fix the issue but then I can't use it. So it does not solve the issue. LOL so if anyone does know a way to make the audio a higher priority or something to make it work please let me know.
Thanks,
Mike

Fixed it, you have to use resco and change audio priority in settings to 110 in registry. Works like a charm now.
MIke

Hi Mikee4fun,
Could you be more specific about which key/value/data in registry that you changed to fix this?
Thanks in forehand!
_________________
QTEK 9090
Rom: 1.22.00 WWE
Radio: 1.08.00
ExtROM: 1.22.126

Mikee4fun said:
Fixed it, you have to use resco and change audio priority in settings to 110 in registry. Works like a charm now.
MIke
Click to expand...
Click to collapse
Can you share the registry entry that needs to be changed?

Ditto, I'd like to know too please cos I've got the same problem.
Own an XDAIIs and use Microsoft Voice Command 1.5 with the stuttery incoming call announcements. Everything else works flawlessly.
Is Microsoft Voice Command the dogs b*ll*cks when it comes to voice recognition! It's the most accurate voice recognition system I've come across. Well done Microsoft, you've made something that works well (for a change ) , apart from stuttery voice announcements of course.

anybody experiencing about 1 to 2 second lag before the ringtone actually rings when you have incoming calls with announce incoming call enabled?
I'm having voice command installed on my Storage area of my Xda ii mini. I'm wondering if that's the reason why it lags?

Here is the exact registry entry
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\Priority256
A detailed thread is here: http://forum.xda-developers.com/viewtopic.php?p=107031#107031

Well I just noticed this static noise while announcing the name with MVC or playing any other audio on the Blue angel only, I tried it on the hima it works flawlessly it never occured

VC 1.5 static problems
:twisted: yup just tried the fix with resco registry editor and all is fine
thx for the info
just another reason why this site is so good imo

Video CALL xda live or Vanila.

I upgraded my tytn with xda live.
I read a lot and did find a solution for video call.
Did someone have Video Call working in xda live or vanila ?
How ? pelese ?

I would love the same if possible.
****************XDA LIVE ROCKS******************

Video calls solution
Galinha, Griffy wiffy!
I used this solution: http://forum.xda-developers.com/showpost.php?p=1149766&postcount=82. Some other people also reported this helped. The only difference for me, was that I installed these skin cabs (see attachment) one after another: "TyTN_Blue...", and then "zphone_..".
Please use search "search" function - these questions were discussed several times in XDALive threads.
Good luck!

Really?
Dear Konstantin K.,
Can you really use the video button to dial video call?
Some people can install the dial pad but when pressing the video call button, it just make normal call (NO video)....
Thanks for your reply in advance.

Install These cabs
Install these cabs it worked on my spvm3100 and video call works fine.
First install MT_PC_HERMES.... then the zpv_leaf
the first adds video calls the second installs the skin.
also make sure that your phone has the correct settings in connections so can actually connect to the 3g network to make video calls
hope this helps

This works well on my UK SPV M3100 on the 3 network.
Used the TyTN Grey dialpad from the wiki to try and match the colours on the Aero scheme.
Anyone found a better dialpad that matches the colours well??

work fine for me but device seems to be slower, that it was before I install it.
I used this:
MP_CVSDcpl_20060920.cab
MT_PC_Hermes_HTC_REG_070112.CAB
P_Generic_UI.CAB
and after that
zphone_reptile_blue_mm_qvga_3g_wm5.cab

Hello :
Thnks ! Where can i get these files ?
Are you haooy with you radio version ? GPS WORKS ???

adamdfox said:
Install these cabs it worked on my spvm3100 and video call works fine.
First install MT_PC_HERMES.... then the zpv_leaf
the first adds video calls the second installs the skin.
also make sure that your phone has the correct settings in connections so can actually connect to the 3g network to make video calls
hope this helps
Click to expand...
Click to collapse
Thnks it work, Were can i find another skins ?

adamdfox said:
also make sure that your phone has the correct settings in connections so can actually connect to the 3g network to make video calls
hope this helps
Click to expand...
Click to collapse
Hi, what do you need to set specifically? I have the dialler, skin and 3G connectivity (for internet) but the Video call fails every time?
Any ideas?
Ta
PS I can receive Video calls fine, its just initiating the call from my M3100?

Just noticed that installing this fix on WMXL v.20 gives me the old green background on the Comm Manager program. It's hidious when compared to the rest of the theme. This didn't happen on WMXL v.10.
Any way to skin it back??
S.K.

Video Call is not such a problem with WM6 anymore.
i've embedded my dialer bitmaps from HTC AKU3.3 ROM to my own cooked Vanilla.
if u smellll...

hang.tuah said:
Video Call is not such a problem with WM6 anymore.
i've embedded my dialer bitmaps from HTC AKU3.3 ROM to my own cooked Vanilla.
if u smellll...
Click to expand...
Click to collapse
Hi! hang.tuah:
Will you post the solution (dialer bitmaps)?
thank you!

I know this is not a issues thread but I thought I would mention after installing the methods mentioned in this thread to get video call, I've noticed when in phone mode if you press the softkey representing Contacts nothing happens however if you actually tap the Contacts on screen then I can go into contacts, has anyone noticed this?

gfreek said:
I know this is not a issues thread but I thought I would mention after installing the methods mentioned in this thread to get video call, I've noticed when in phone mode if you press the softkey representing Contacts nothing happens however if you actually tap the Contacts on screen then I can go into contacts, has anyone noticed this?
Click to expand...
Click to collapse
I have this problem also, I thought it was due to my video skin only though. Not too much of an issue, but suspect when the 'official' XDA Live skin for video calling comes out, then it'll be fixed.

gfreek said:
I know this is not a issues thread but I thought I would mention after installing the methods mentioned in this thread to get video call, I've noticed when in phone mode if you press the softkey representing Contacts nothing happens however if you actually tap the Contacts on screen then I can go into contacts, has anyone noticed this?
Click to expand...
Click to collapse
same in mine. not a major problem, imho...

panzer said:
same in mine. not a major problem, imho...
Click to expand...
Click to collapse
Do you also get the green comm manager screen?? It happens on mine......
S.K.

silent_killa said:
Do you also get the green comm manager screen?? It happens on mine......
S.K.
Click to expand...
Click to collapse
My comm manager is blue. but this dialer lags horribly.........

Strange, my dialer works fine (except for the contacts button obviously) no lag at all. However as soon as I install the P_Generic_UI cab file included in the zip of 3 cabs poseted here my comm manger goes back to the old green HTC one in WM5. This did not happen to me in the previous WMXL release.
Tried it twice now and my comm manager has been reskinned.
Must be doing sommin wrong here, lol.
S.K.

Strange Majik Problems

Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?

yozh said:
Strange things are happening all day today, I had majik installed since friday. Today my bleutooth jsut turns of and I cant use the head-set. Then programs like messaging froze, I was able to close it, but still IE froze and stuff like that, any one else expirencing things like this ?
Click to expand...
Click to collapse
Ive been SRing all day! Mines been freezing on my telenav and sirius. Just started to do this today. Has been fine since Friday as well.

Yeah, same here. I have to do a SR every time I get in my car
Looks like I'll be installing something else on it...

I have been having IE problems connecting, Bluetooth not connecting, 3G freezing. Must be a bad day for Majik.

Well well I`m not alone on this, well vp3G here I come.

I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5

spiritofseth said:
I am having this problem as well, what worse is that I am away from my PC for 32 days! on business in boston and all I have is a mac, even worse is that Igo keeps losing GPS whenever it shuts off Bluetooth, isn't there a registry hack that enables power-save on BT, I think I enabled that before and had a similar problem in WM5
Click to expand...
Click to collapse
Oh man I feel for you. I`m not sure about pwersetting for b, but it would make sense to me.

Had many problems with Majik yesterday so I tried 3 other roms. Not one would give me 3G sitting here in my office as majik had done. Flashed back to Majik and is working very well. I guess vevery week reflash

People, the root of nearly 70% of problems stems from 3rd party apps and NOT the ROM......
suggest you guys test it out with no apps installed and you will see the ROM is solid.
anything with 'spb' in the title should be left at arms length.
Anything like phonealarm etc... that claim to support WM6 really are only going on beta testers...remember the releases we are using are VERY new

Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.

yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
Like i said, Hard Reset....then dry run it and youl probably see the difference.....3rd party software which is acting up can cause allsorts of weird problems.

yozh said:
Had nothing spb installed. The biggest issue is the BT disconnecting all the time. And the phone frezing.
Click to expand...
Click to collapse
I've got 5 8525's running this Majik and only one has "freezing" issues... and he had these same issues with his Wizard. 2 POP3 email accounts being polled every 30 minutes, Exchange 2003 push and 140 plus reminders MIGHT have something to do with it <sigh>
Battery life is incredible, speed is great when one adjusts the glyphcache.
As with you, my biggest complaint is with the BT dropping the call to the device but then I can bring it back up… seems to happen mostly on my initial outgoing call….
Again, respect to the chefs, this is a bad ass ROM.
Peace, out.

Hi Guys
I have been running LVSW 20070423 since it was released. Yesterday i decided to give Majik a go. All i can say it is terribly slow. Even clean ROM without applicvations. Could only stand it for 30min and then i reflashed LVSW back. The other thing is default coulors, i could hardly see my screen when outside. Dialer is crap, i like native WM6 dialer when you can type a few letters and then hide the dialpad. In Majik there are 4 lines only and if you have a lot of contacts it is a real pain to scroll through.
No good for me at all.
Will stick with LVSW ROM until the official release.

I have installed, Sirius, Voice Commander, Adobe, Live Search, WLM 1400, and esmertec. I tweaked the performance myself and set up mms and MEdia net and ISP/WAP settings myself. After I reinstalled Majik I have had no problems. I think that those problems came from WLM and IE because of the IPhone owners taking up my bandwidth
Note....Everybody that had problems was the same day they released the IPhone and we are all on AT&T
Check it out
http://www.theregister.co.uk/2007/07/03/stingy_att_iphone_network_snafu/

Second Flash
I think I had a bad flash the first time around.
I reflashed yesterday and the speed problems have dissapeared.
I was waiting +/- 20 seconds for /windows to open using file explorer.
That's all gone now and the ROM is pretty nippy and stable so far for my application.
But I do feel that all the extras trying to mimic the "Touch" ROM will have an effect on the speed and maybe stability.
That's why is still flash a different ROM every week or so.
To date Sleuth seems to have the combo nearly right.
LVSW cooked up fantastic ROM's, but he seems to be playing with his ELF now. - a bummer for us Hermes users.

Majick slowishness
I've found that installing the video dialler (3 cab files) dramatically slows down the Majick rom. I thought I was imagining things so I hard reset and repeated the excersise a couple of times with the same effect.
I leave the video dialler off now. I can't think of a time that I've ever used it although I do obsess about having a feature on my phone that I can't use even though I never use it.
Although Majick is an excellent ROM I did find the current LSVW was a bit quicker. The HSDPA problem in this ROM meant that it was a no-goer for me though.
I'm not complaining you understand, I'm very grateful for all the work people have done to get me WM6 on my phone!

only problem i have with majic so far is that when I add the new internet 3G connection, my username and password never seems to get saved no matter after how long. i have tried to both soft reset and power off, but still the 3G username/password never gets saved. anyone have any ideas on this?

Problem with CRC r13.0 ROM - no voice transmission!

Hi all - from some reason, after a non consistent time, any phone calls I make do not transfer my voice - it'd dial the number, the recipient will answer but hears nothing. A reboot may not fix it - but a few will eventually. Calls I am receiving are perfectly fine.
Any ideas?

hi, post this on CRC's thread or do a search there (no need to create another thread)

dodgy microphone crc 13 rom fix
Hey i had the same problem and found it hard to find a fix, so i installed resco audio recorder and set it to record phone calls, now the microphone kicks in every time! its a dodgy work round but it works well if your desperate. tho its worth opening and closing the audio recorder occasionally to reclaim program memory, and deleting the files through the program only sends them to the recycle bin if u use resco explorer, so delete through that. sorry if this is the wrong spot to reply, but i've been at work all night and want to get this info out! good luck and thanks to all

Uninstall SRS WOW HD
I had this problem when I first used CRC's ROM. I don't think it's the CRC's issue to fix, per se, but I determined it was the SRS WOW HD app under System in his Device Update that was the offender. Once I removed that, my phone's mike started working again. Never investigated the app to see if anyone else reported a problem. I just figured I didn't need it so badly as to lose my ability to talk on the phone (and let people know I was actually able to hear them).

grimlor said:
I had this problem when I first used CRC's ROM. I don't think it's the CRC's issue to fix, per se, but I determined it was the SRS WOW HD app under System in his Device Update that was the offender. Once I removed that, my phone's mike started working again. Never investigated the app to see if anyone else reported a problem. I just figured I didn't need it so badly as to lose my ability to talk on the phone (and let people know I was actually able to hear them).
Click to expand...
Click to collapse
Yes, most of the time when people have issues with there sound, its SRS WOW or its a hardware issue.

Please post in the approrpiate thread.
Thread closed.

Problem with Bluetooth after installing tomtom7

Hello,
I just installed Tomtom7 on my pro2. but now the bluetooth stack is broken.
On other websites they say that tomtom replaces BtCoreIf.dll and BtSdkCE30.dll I already removed them and soft reset, but that doesn't work.
Can someone with a Pro2 upload those 2 files so that i can replace them on my phone? That will be the fastest solution i think... Thanks!

When this happened to me I had to hard reset, then re-install TomTom without the BT files. I'm still not entirely clear what the problem was, though, or how to correct it without hard resetting, but those files seemed to have corrupted something.

had The same problem had to hard reset. teach me to get a pirate version

I'm having the same issue. So removing the files from the cab fixes it?
______________________________________
Watch my full in-depth review of Touch Pro 2
http://www.youtube.com/watch?v=VgTjSbpFDhQ&feature=channel_page

No problems on my site... Using tt7.915

Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.

Corell said:
Not sure if this would be the place to ask, but the search feature won't work properly for me atm ... so please give me a break if i missed the answer
Will Tomtom7 run with the internal gps in the TP2?
Thanks guys.
Click to expand...
Click to collapse
Runing gr8 with internal GPS

Roberto79 said:
Runing gr8 with internal GPS
Click to expand...
Click to collapse
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again

Roberto79 said:
No problems on my site... Using tt7.915
Click to expand...
Click to collapse
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?

RMU said:
I'm using the same version...
i hard reset my phone already, but i want to install tomtom again, but i think i wait a while because i don't want to reset agian...
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
Hmm dont have any of posted problems looks like i was just lucky lol but maybe that somthing jumps up later when i'll "really need it"...
Corell said:
wonderful - thanks for the fast reply. until now i've had to use a bt gps reciever because my 1½yr old touch dual doesn't have a built-in gps and having only to use one device will be so much better and easier
- the version of tomtom7 that can be purchased on sd-card will work with pro2 considering the high resolution?
thanks again
Click to expand...
Click to collapse
Its the latest release of tomtom7 so it has to work at least a bit older version works gr8 on my TP2, resolution is superb. I have tryed Amigo but it didnt work even with multi resolution .gro file

RMU said:
and i discoverd that after i installed tomtom, some of my text messages where not been send... (the phone randomly removes the + before the phonenumber) but sometimes it worked and sometimes not... very strange... so i hard reset and now everything works fine, but now i want tomtom to get working what to do?
Click to expand...
Click to collapse
now i see that is not a tomtom problem, because i've hard reset my pro2 and not yet installed tomtom, so i've made another thread for this.
but the bluetooth problem is still there when i install tomtom

I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.

It seems to be. It corrupts the files.
_________________________________________________
Check out my full in-depth videoreview of the Touch Pro2: http://www.fuzemobility.com/excellent-htc-touch-pro-ii-video-review/

dicko99 said:
I'm seeing the same "BTTrayCE is not a valid application" error after installing TTN 7.450.
Does anybody know of a workaround that will enable both BlueTooth and TomTom to work?
Is a hard reset the only way to get BT working again? What about uninstalling TomTom?
R.
Click to expand...
Click to collapse
Uninstalling tomtom does not help for me.

The files are replaced on the device so a hard reset is the easiest way back.
TT 7.910.9185 is running fine on mine, I did have the same issue with another version of TT7 though, but simply hard reset to recover and started again.
I think (although have not verified) that the BT Stack on the Rhodium has been updated to a Broadcom stack.
Can confirm that the above version works fine, great resolution and no issues using BT after install and with the new BT Stack you can now route all audio from the Rhodium through your hands free / car kit
Cheers,
Beasty

I did have a problem with v7.915.9196 where the device bootup was delayed by about a minute and a half (from 1m20 to about 3m from cold to starting Mobile Shell) which I had to get around by not installing the TomTom BT files.

I used TT7_915.9196_VGA__Negro.cab which does not appear to have the bluetooth files in it.

and this version could also be purchased on tomtom with ur chosen map on an sd-card? just to avoid having to hard reset and stuff after trying to install
thx.

I removed the bluetooth files from the cab with WinCE CAB Manager and installed tomtom agian, now everything works fine.
I'm now using tomtom version 7.450.9028 , i think it will work with other versions to
Thanks!

wonderful, great info now i have one less thing to worry about when my TP2 gets here thanks dude!
EDIT.: Pardon the perhaps n00b question, but i get an error while trying to run the .exe. is it meant for running on the phone or on the pc? i use winxp