I used a program named "ozBT" to turn on/off BT from using, this program is really great, but i had a problem: when the BT off, the headset is disabled too, how can i always let the headset enabled with or without the BT signal?
Related
I am having some issues w/ WM6 and my Plantronics 640 headset. After a call or two, when I go to initiate a call from the telephone (with handsfree on), the call immediately connects and disconnects right away.
If I disable bluetooth, it works fine using the phone.. If I re-enable bluetooth, I will get one or two calls and then the same behavior comes back.
BT
Try to leave the unit on while calling.
So, go into setting, power and take out the tickmarks for 'switch off after xx'.
There's something flaky on the BT implementation and the unit going auto-off. No expert, but it worked for me on my BT carkit.
I'm using a bluetooth 2.0 stereo headset with my HTC Herald. The problem is that when you press the function key on the headset for a second, it automatically calls the last number dialed. Is there a registry setting or something that can disable this feature in order to prevent making accidental calls?
Also, each time the headset connects, it doesn't automatically set as wireless stereo. I have tried the A2DP Toggle today screen plugin. Although it works, I'm still looking for a way to map the function to a hardware key, without taking up space on the today screen. Any help would be appreciated.
Which headset are you using?
I'm using a Clip II Mini. It's the one they sell on eBay that looks like a 2nd gen iPod Shuffle, and has a 3.5mm stereo jack. With my previous BT 1.2 headset, all I had to do was click one of the controls to activate wireless stereo mode.
BT headset help
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
farhanehmudkader said:
I too have a BT headset (Jabra BT135) and only the handsfree profile comes up on the BT menu .. the " set as wireless stereo" is faded out (see attachment) and I can only use it for receiving and speaking on the phone but not for listening to music from wmp... pl help
Thanks
Click to expand...
Click to collapse
'cause it only supports HFP and not AD2P (wireless stereo).
It even say on the Jabra BT135 site.
Try using the latest beta of BatteryStatus and the tray icon to manager the bluetooth functions. Solved all my problems. It makes it a 1 click operation. Just toggle A2DP and it automatically turns on Bluetooth and activates the "Stereo Headset" profile for my headset device.
BatterStatus Extended V. 1.05 Beta nightly build
Thread I used to discuss my issue
As for the auto dialing I haven't encountered it since installing and using the
A2DP toggle on BatteryStatus. Only conflicts I encounter are when I use Audio Manager and WMP and forget to close the process on 1 which is my own fault.
Good Luck
First of all, I would like to says big thank to all rom cooker. You all did a very great roms. However, I still have a little problem that annoy me a lot...
I had connected the stero bluetooth headset with Hermes and choose both "Wireless Stero" and "Headset" profiles in bluetooth setting.
Then when there is incomming call, the Hermes will not ring. So I had a lot of miss calls.
However, if I disable the "Wireless Stero" profile in bluetooth setting, the Hermes will ring normally.
I used to use the Prophet before and there is no problem. The Prophet will ring normally although I choose both profiles.
The stero bluetooth headset is the same, iTech Clip Radio.
I had tried on many roms and found the same problem. So I guess that maybe I have to modify the registry setting to enable ringing on "Wireless Stero" profiles. Can somebody help me to solve the problem please???
I have the same issue and assumed that's how it worked since I just got this Jabra BT8040 that supports wireless stereo. It would only ring through my headset when wireless stero was enabled. If there is a way to get the phone to ring also that would be great. Right now I do the same thing as you, disable the wireless stereo until I need to use it.
My guess is this is by design since all sound is routed to stereo headset then so would the ringer. This isn't an issue for me since the Jabra BT8010 I can turn on/off stereo by simply pressing a button on the headset.
Sorry don't know of a solution.
Thinking about it I guess you could use something like mortscript and make a button that turns stereo pairing on/off to make it simpler I dunno.
I have similar issues with the PAYS rom, when listening to music via my BT earpice (Jabra) where you click the answer button on the earpice it then takes the music from the device and plays it through the jabra ONLY for about 5 seconds and then defaults back to the device?
Any suggestions would be appreciated?
I have a Jabra BT620s bluetooth wireless stereo headset which I use as an headset and my music headset on the touch hd. I paired them succesfully and playing music with mediaplayer works perfectly.
The problem is when I turn on my Jabra headset. It pairs with my phone fine, but it isnt set as wireless stereo on start. So I have to set it in the bluetooth configuration screen everytime I turn the headset on, cause else the music plays over the speaker of the phone.
Is there anyway to let windows mobile always be forced to set the headset as wireless stereo?
Same problem with Funkwerk EGO Talk
I've have got the same problem with Funkwerk EGO Talk Bluetooth carkit with A2DP. Pairs at the start with Headset Profile, so calling works(except the hangup button btw, ?which redails?? most of the time). But it doesn't start the wireless stereo profile.
I have to "Set as wireless Stereo" everytime i reconnect with the carkit
Anyone has a solution or workaround to start "Set as Wireless Stereo" automaticly or at least in 1 button?
Guys, using the search function would have turned up the following solutions found previously on these forums:
a) use Mortscript to macro the key presses
b) firmware update the headset (i.e. Jabra)
c) try turning on music and bluetooth before the headset - worked for some people
I have the same problem as you, any other suggestions?
I've the same problem with Moto music/blutooth headset
Hmmm
I don't have this problem with my Sony-E HBH BT set. Each time I turn it on the pairing is automatic and get stereo immediately.
I also can have the pocket player or TF3D media player running or not and it will change "on the fly" to BT when I turn on the headset.
No problem here with Motorola S805's.
I turn the phone BT on, turn the headphones on, press play on the headphones and get music.
I have the same problem with my motorola S705
Auto pairing with calls is ok but not with stereo A2DP. I must turn headset on manually in the bluetooth otpions which is quite long and annoying.
Pairing was working good with my TyTN. So there might be a problem somewhere
I've had some problems with my Samsung SBH170 not connecting at all.
I removed them from the BT settings and repaired, now they are found with out problems, allthough not very quickly.
In 'Advanced Configuration Tool 3.3' I came across 'Bluetooth Audio Gateway Service' which was disabeled, I enabled it and rebooted, but it doesn't seem to make any difference on my machine. According to this thread it may be required to enable audio over bluetooth: http://forum.xda-developers.com/showthread.php?t=424424
Regards JD
Hello all. I'm new to windows mobile but not to smartphones. For some reason my bluetooth headset is not working. I have not installed TomTom or had any error messages, basically I turn on the bluetooth function on my TP2, then turn on my headset, it goes to search and never finds my headset. It finds everything else, my blackberry, another cell phone, but not my headset. Any ideas?
Headset not in pairing mode or not visible? If you have another bt device, use that to test.
I thought I had it in pairing mode but apparently I didn't lol. Problem solved, thanks!