I know, the prob ist discussed already in other threads, but I will tell you my findings...
I used the
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
and it works great. But If I pushed the Voice Dialer at my BT-Headset just the phone pad starts and no speed dialer.
After I had to install the original O2 German ROM 2150429_21504115_02921
I found out, that suddenly the voice speed dialer works...
I've installed none of the cabs from the Ext_ROM!!!
Cause of my Backup with the Dopod ROM I had to go back to the Dopod and there without any cabs of the Ext_ROM no voice speed dial works with my BT-Hedset-
I then tried alot of patches offered here in this forum...but nothing works...
Have s.o. an idea to help???
I like the Dopod ROM cause its english and faster than the o2, but I need Speed Voice Dialer in my car and don't really need the vcommander...
Thanx in advance...
Rob
I also have your problem with a TNT Rom into my K-JAM, everythings are ok, more speed, more functions but I can't use the Headset button to activate Voice Commander or Speed Voice, it's also a disadvantage when I use the headset into my car, I have to take the phone to press the Button !!!!!
Please help us. !!!
Related
Earlier when I used to press the answer button on the bluetooth it used to bring up the Voice Dial, now when I press it brings up the Dial Pad. Anyone can tell me what would I have done to cause this and how to fix it? Thanks in advance.
kull said:
Earlier when I used to press the answer button on the bluetooth it used to bring up the Voice Dial, now when I press it brings up the Dial Pad. Anyone can tell me what would I have done to cause this and how to fix it? Thanks in advance.
Click to expand...
Click to collapse
Read through this thread: http://forum.xda-developers.com/showthread.php?t=257415
There is a hack mentioned in there about BT Headsets and voice command. Good luck.
Thanks but did not...
Thanks for the link, unfortunately the Bluetooth hack file provided has no effect whatsoever on the present status of the phone. Guess these are Universal hacks and not Wizard.... the hunt for the solution is still on....
Same problem here
When I use TT5 and do voicedailing, I get stuck with a annoying Phone screen in front of my TT navigator
How to resolve this?
How to resolve this? No help from anyone....
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Check the link about MS Voice
I added a note about creating a key as well.
All works fine on my Orange spv m5000
Voice Speed Dial not Voice Command
Thanks for your reply, actually what I am looking for is to activate the Voice Speed Dial via Bluetooth not Voice Command. It could do that before, but now when I click it brings up the phone dialer and not the Voice Speed Dialer. Any solution for that?
Dears....this is what i call best of the best.....after a lot of FLASING....the best performance,stability,functionality and no HANGS.....is this compination.....the latest Hilmi WM6 v1.1 with Radio 1.13...and if you care about adding the Arabic languge to your device .....the Arabizer works like i have never seen before even with the original rom came with my device....one more thing a can say....as we all know there still NO VIDEO CALL...I DID NOT TEST THE 3G ( WE DO NOT HAVE UNTIL NOW.. USING GMAIL INSTED WORKING GREAT )...
I WILL KEEP THE REST FOR YOU......
REGARDS
I have helmi's 1.1
Causes me some problems with mobinil GPRS ...
Sometimes locks up and would no connect till i soft reset
Which operator did u test with it.. Mobinil?
I have Radio 1.14 . Did you try Radio 1.14?
ksameh said:
I have helmi's 1.1
Causes me some problems with mobinil GPRS ...
Sometimes locks up and would no connect till i soft reset
Which operator did u test with it.. Mobinil?
I have Radio 1.14 . Did you try Radio 1.14?
Click to expand...
Click to collapse
Yes...the problem is Radio 1.14....i did test it .....alot of hangs....just try 1.13 working very smooth and also Arabizer
problem is 1.13 has very low voice quality and voice tends to skip a lot specially with vodafone..that was with inrda 3.3 b6 .
now am using 1.14 with mobinil...very very bad gprs performance..voice is ok though...
i will try to go back to 1.13
thanks a lot
sorry
I'm sorry to bother you guys with what will probably turn out to be an easy solution/answer, but.... how do you get 1.1 wm6 with radio 1.13? i figured (and already flashing) that i should download helmi 1.1 ( the x.rar file) and download the German 1.13 radio rom (only one available, is there a difference in the languages regarding the files it installs?) and overwrite the files inside the "x.rar" (helmi's 1.1 wm6 rom) and THEN upgrade? i'm really really confused here....
My dream would be:
A guide to:
Installing wm6
with stable rom/radio whatever
and WORKING gprs (t-mobile)
And that when someone calls me, it DOES ring, instead of a half second ring before the voicemail kicks in
if anyone would like to help me personally out with the first part, and a lot of people with the second.... i would be very thankful!
Muchos gracias from The Netherlands
bastiaanoskam said:
And that when someone calls me, it DOES ring, instead of a half second ring before the voicemail kicks in
if anyone would like to help me personally out with the first part, and a lot of people with the second.... i would be very thankful!
Muchos gracias from The Netherlands
Click to expand...
Click to collapse
the phone ringing bit! just goto phone pad> menu> options>services tab> call forwarding,. get settings then adjust the settings when they come onscreen ie untick forward all calls, or change the amount of seconds to "forward after"
Arabizer & Hard keyboard!
astraman said:
Dears....this is what i call best of the best.....after a lot of FLASING....the best performance,stability,functionality and no HANGS.....is this compination.....the latest Hilmi WM6 v1.1 with Radio 1.13...and if you care about adding the Arabic languge to your device .....the Arabizer works like i have never seen before even with the original rom came with my device....one more thing a can say....as we all know there still NO VIDEO CALL...I DID NOT TEST THE 3G ( WE DO NOT HAVE UNTIL NOW.. USING GMAIL INSTED WORKING GREAT )...
I WILL KEEP THE REST FOR YOU......
REGARDS
Click to expand...
Click to collapse
Hello astraman. Thank you for your post, it's really enlightening. I want to check something with you...
1. Agu_Gaby Arabizer built 347.
2. Arabizer built 337.
I have used Helmi, Indra & PDAVIET and installed both the above (1 & 2). I realized with #1, when installing the Arab_Keyboard_fix files, the enlglish typing with the hard keyboard, it allow 70 charecters as well as arabic. Whereas with #2, with the same Arab_Keyboard_fix files installed, I get 160 for english and only 70 for arabic!
Now what is the difference and how to resolve this?
If any of you members know what's wrong, please explain..
thanks
Where Can I Get The 1.13.oo Radio From?
Thanks
This idea doesnt work for me. I use Vodafone UK, and after this radio install, its been one problem to the other. Major hangs, going back to 1.14
Yes, you are right 1.13 is better tahn 1.14.1, as gprs in 1.14 wouldn't reconnect after a voice call, sometimes it hangs in dialing and doesn't work unless you soft reset. Those peoblems occurs also with many wm5 and all other wm6 not helmi only. But after downgrading to 1.13 it is better now and no problem in dialing at all, but the GPRS problem aoccured once with me. I am using Vodafone, and didn't try it with Mobinil. I didn't install arabizer yet, hoping to try that version comes bundeled with Jasjam, it was the best in wm5 but not tested yet with helmi wm6 v1.1.
hbahaie said:
Yes, you are right 1.13 is better tahn 1.14.1, as gprs in 1.14 wouldn't reconnect after a voice call, sometimes it hangs in dialing and doesn't work unless you soft reset. Those peoblems occurs also with many wm5 and all other wm6 not helmi only. But after downgrading to 1.13 it is better now and no problem in dialing at all, but the GPRS problem aoccured once with me. I am using Vodafone, and didn't try it with Mobinil. I didn't install arabizer yet, hoping to try that version comes bundeled with Jasjam, it was the best in wm5 but not tested yet with helmi wm6 v1.1.
Click to expand...
Click to collapse
what network do you use and where are you located? I think this might have to do with service providers. now I am back to 1.14 and my exec is happier .
I'm using Vodafone AU on Helmi 1.1 WM6 w/Radio 1.14...
No Problems here yet...
In Italy too with 3, no problem with radio 1.14
I flashed my phone with the WM6 PDAMobiz rom.
I installed the apps I need, and right now I'm pretty satisfy with this rom and my Orbit.
But one of the main reasons why I flash the phone to WM6, was cause on WM6 it should be able to get VOIP working on the phone.
I tried several things, but I just can't get VOIP working on the Orbit.
Whatever I do or try it always says "VoipBuster" searching
Any ideas?
Thanks
What data plan do you have on your account?
Gajet said:
What data plan do you have on your account?
Click to expand...
Click to collapse
Ok, I finally manage to get this working ;-)
Now my Orbit looks more and more the perfect device to me.
My next thing on the whishlist for the Orbit is SDHC support, so I can put a 4 gig card in my Orbit
@Gajet, euh what dataplan? I'm using VoipBusterPro for a several months now, in the beginning I was using it with my Nokia N80 and now finally with my Orbit.
The countries I need to call to is free (not really free, cause they charge you a connection fee of 3.9 eurocents for every call you make!)
Skype works just fine!
CoolGadget said:
Ok, I finally manage to get this working ;-)
Now my Orbit looks more and more the perfect device to me.
My next thing on the whishlist for the Orbit is SDHC support, so I can put a 4 gig card in my Orbit
@Gajet, euh what dataplan? I'm using VoipBusterPro for a several months now, in the beginning I was using it with my Nokia N80 and now finally with my Orbit.
The countries I need to call to is free (not really free, cause they charge you a connection fee of 3.9 eurocents for every call you make!)
Click to expand...
Click to collapse
Hey guys!
Skype works just fine on my newly upgraded HTC P3300 but I must say that "Battery Status" (overclocked at 247 Mhz) does the trick!
While talking with Skype my battery reaches up to 42 Celsius... Hope I will not FRY my device... A couple of minutes after then talk it drops down to the average 34 Celsius.
On an other account I must say that on the WM6 rom I just flashed, WMP does not play MP4 (very strange!) and in the Start/Settings I am missing some items (Voice Commands for example!)... Any idea how to fix that?
Thanx,
SiperX
SiperX said:
Hey guys!
Skype works just fine on my newly upgraded HTC P3300 but I must say that "Battery Status" (overclocked at 247 Mhz) does the trick!
While talking with Skype my battery reaches up to 42 Celsius... Hope I will not FRY my device... A couple of minutes after then talk it drops down to the average 34 Celsius.
On an other account I must say that on the WM6 rom I just flashed, WMP does not play MP4 (very strange!) and in the Start/Settings I am missing some items (Voice Commands for example!)... Any idea how to fix that?
Thanx,
SiperX
Click to expand...
Click to collapse
SiperX
I have Voice Speed Dial under programs. Is that what you looking for?
What else are you missing?
cheers
CoolGadget
Missing in Settings
CoolGadget said:
SiperX
I have Voice Speed Dial under programs. Is that what you looking for?
What else are you missing?
cheers
CoolGadget
Click to expand...
Click to collapse
Hi CG,
Normally Voice Speed Dial should be in Settings and not in Programs.
I have used Voice Speed Dial quite a lot in WM5 as I controlled almost totally by voice commands (calls to contacts, applications/utilities) my device.
With this rom (not having it in Settings) you open it in Programs (so you can access its function but not the configuration/options), you save some voice tags and once you have closed it you cannot open it any more to add/remove/edit voce tags....
I hope I made myself understood... Try it on your device and you will see what I mean...
Any suggestion is welcome.
Thanks in advance,
SiperX
SiperX said:
Hi CG,
Normally Voice Speed Dial should be in Settings and not in Programs.
I have used Voice Speed Dial quite a lot in WM5 as I controlled almost totally by voice commands (calls to contacts, applications/utilities) my device.
With this rom (not having it in Settings) you open it in Programs (so you can access its function but not the configuration/options), you save some voice tags and once you have closed it you cannot open it any more to add/remove/edit voce tags....
I hope I made myself understood... Try it on your device and you will see what I mean...
Any suggestion is welcome.
Thanks in advance,
SiperX
Click to expand...
Click to collapse
Totally clear mate ;-)
Never realisez this "bug" till you mentioned it...
I'm wondering if they can solve this... :s
Hi everyone,
I've tried searching but just get custom ROMS popping up.
Can someone recommend a good voice dialer that works over bluetooth also. If its still good but doesn't work on bluetooth please also say (but state in post).
I've tried Totalvoicecontrol and Choicedialer but they don't recognise me very well. Had Cyberon Voice Speed Dial on WM6.5 but nothing from them on Android
Would like one where I can program it to my voice control rather than it trying to recognise me.
Thanks.
Hello!
I know, I know - it was already.. But.. it does not work
Can somebody please tell me how the hell it suppose to be done to work properly? I am traveling a lot by car, and I really would appreciate this function.. and any help with it!!
I did found a thread in which it was written that it should work.. but I've failed..
1) I've readed that I should have hands-free config. I've installed it - trial version - 30 days. I did marked the Voice dialling
BTW - is there any way to do it without this program? I would need sth that is.. pernament
2) cyberon speed dial. I have..
3) I installed the path for speed dial.
and.. In buttons settings I have a button that sould launch voice speed dial (button5).
But when I press buttons on my bluetooth I can - with one button holded longer - dial last number, with the second holded longer - phon extension (for dialing a number) is launching.. no speed dial at all !!
P.S. I can not use MS VOICE!!! I am polish and i just can not communicate with that program! The best way would be to lauch cyberon program - I can teach it and it can uderstand everything I say..
nobody.. ? ;( ;(
I´ll try to traduce this:
***://***.htcmania.com/showthread.php?t=40652
First install VSD(Voice Speed Dial). Softreset
(***p://***.4shared.com/file/55482593...rified=2948f2e)
Then install VSD patch. softreset
Then install JetWare Hands Free Bluetooth Extension.
(***p://***.4shared.com/file/48603300...HFExt-131.html)
Then in Jetware mark Voice dialing in advanced options.
I hope it works for you...
Sorry for my bad english.
hello!
Thank You very much for that reply!! Actually.. I was doing this at the first time.. but it did not worked
But now, after the hard reset, I did that, but in a way described here:
http://forum.xda-developers.com/showpost.php?p=3237913&postcount=7
and suppoerted by
knowing the key in registry - in OEM there is sth like voice dialing with the path in it value. all of that, after the hard reset did the job!!
So now it is all fine and cool
Weard - it was not before the hard reset o_0
thank's again!!
its funny that sony sold it and said it would work when its not..