Related
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
i use my car charger from my gps that is the Holux 236, the only think i have to do so that it starts charging is turn it off on the button and the led will change to orange, i have tried one other charger that has a usb plug and it worked fine ! So has long as it has a usb plug you'll be alright and if you do not find one look for the Motorola car plugs that it will probably work on Uni since it has a mini usb plug
The charger from M3000 works fine with my Uni
And the Motorola Mini-USB chargers doesn't work...
Hi, I found that this issue is connected with proper usb cable not with charger itself (usb mini have 5 connector but in some cables only 4 are connected and in some other cables all 5 are connected and so are the difference). I was also trying many chargers and no luck. But I ve tryied charger with other cable and suddenly all chargers start charging my jasjar.
Anyway, the bad thing is it stops whitout any reason so now charging jasjar in my car is a real mystery for me.
regards,
Piotr
Be careful if buying one with a double USB output - I bought a few different models hoping to power both Exec and the Holux GPSlim-236, but all failed. They would power the Exec, but as soon as the Holux was connected, it would always cause the Exec to continually reboot - fortunately "soft". Make sure the supplier will take them back if it doesn't work.
Try a car charger with a USB socket on the end that takes a separate Sync/Charge cable.
The problem is, the exec is very power hungry, especially when the batt is dead !! you need a high current charger at least 1A (1 amp) the charger used with the blackberry (I forget which model) is suitable as is the genuine exec charger obviously.
use O2 Atom car charge
O2 Atom car charge will work with O2 Exec as well as A/C charger from Atom
Exec/SPV car charger...
Got an o2 branded one today for the Exec/Mini - works like a charm (Charges my SPV and runs Tt at the same time) but cost me £14.99 for the privelage!
could you post a link to the website? I would love to purchase one but am currently located in Singapore and so far all the charges don't seem to work for me.
vapor said:
I would like to get a car charger that works with the O2 Exec when I am running navigational programs such as Garmin Que and TomTom. I have tried more than 5 chargers but no luck thus far.
If anyone has any to recommend, do let me know. I am located in Singapore.
Click to expand...
Click to collapse
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
southernint3l said:
I have one brand new that Imate sent me for a delayed process when i got my JASJAR repaired.Never used it either.Let me know if you are interested.Regards
Click to expand...
Click to collapse
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
vapor said:
I would love it but can you confirm that it would charge the phone while running navigational programs?
You can email me at [email protected] to discuss the price and shipping.
Click to expand...
Click to collapse
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
southernint3l said:
Yes it does.I have TOM TOM navigation and IGO that i use.I have a 3800 Li-Ion battery.I plugged it in to see if it worked and it does.Has a green light and all.I will email you tmw.As i have just got done with a long day of data entry for work.FYI
Whatever you are doing with the phone,it charges while its plugged in.
Click to expand...
Click to collapse
sounds great. I have gotten your email and replied. Hope we can come to a decision soon and I can get my hands on the charger.
if anyone else has any for sale, do let me know as well.
Car Charger for UNI - how to make working
Hi All!
I've also tryed 2 diferent car chargers and 1 USB Pluggable Car Charger (some noname chineese 3-rd party) with 3 diferent cables, and one 3-rd party AC Power Charger. They ALL worked strange.
I can confirm that to make them all work I should:
1. Switch off the Universal;
2. Plug in the chgrer in to Universal;
3. Wait until the Red Light on.
Now I may turn the Universal On, and see the "Charging" battery status.
The reason and how to fix:
As you may see I used different adapters. All they have from 0.5 to 1.0A output circuit. But, the USB ports I used with my laptops have only 0.5A output and always start charging the Universal.
So, I dont think the output power is the reason.
The most likely - it is the "5-th pin" issue, which is mentioned above here. Can somebody provide information about power connection for the Universal?
It seems the solution is about to interconnect/short circuit 2 wires in the car adapter' cable to make the Universal charging in a usual way with any of my (your) "non-working" car adapters.
Also, I've noticed, that in a case the battery level around 30% and I plug in the "non working adapter" and no red light and system not is in the "Charging" state -- the battery is charging anyway!
Also, let me remind you about another issue that the Universal have: Active Sync (older versions) would not sync (USB Device not recognized error) if you plug in the Universal if the power is On.
To workaround that you have to switch off the Universal, plug the cable and after that you could successfully sync. The same symptoms? May be the same reason?
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
man why is it such a complicated issue to get the universal to charge? and it seems that this charging problem only happens to the universal and not any other device, am i right?
nabuhonodozor said:
I would advice anybody not to mess with interconnections in USB, I mean stop soldering and checking because its shortest road to bricking Your precious jasjar. It can be done with proper cable and you have to find the right one ;-)
Secondly - I found that jasjar Rom is also responsible for charging issues. As I stated earlier I finally found good usb cable but later on I lost an ability to charge Uni. in the car. After upgrading to the Aku3.2 rom it start to charge immidiatelly. Same charger and cable - one time it charge, second time it dont. So additionally to cable theres something with soft with preventing Uni. from charging.
Click to expand...
Click to collapse
YESSS! I Have upgraded to on of that Aku3.2 recently! May be it is the reason! But, my original Power adapter still charges my Uni so does the USB conndction to the laptop...
To ALL: Could you please confirm that you can use third-party adapters with the older ROMs?
hopefully we can get some updates soon.
Are all chargers alike?
Are all chargers the same? I would think that the USB power rating would be the same. So, I should be able to charge the Jasjar using a charger for a Motorola RAZR (if I weren't so afraid of blowing up the Jasjar)
Hi,
Just purchased a cradle for the universal which has a USB and an AC adapter connection.
The USB works fine for charging the Universal.
The AC Adapter connection on the other hand doesn't charge the PDA at all.
I thought I remember reading something concerning a fix for this but can't seem to find the post for it.
Any body got the solution for it or do I have a faulty cradle?
Thanks.
I would change usb cable
modem_man said:
Hi,
Just purchased a cradle for the universal which has a USB and an AC adapter connection.
The USB works fine for charging the Universal.
The AC Adapter connection on the other hand doesn't charge the PDA at all.
I thought I remember reading something concerning a fix for this but can't seem to find the post for it.
Any body got the solution for it or do I have a faulty cradle?
Thanks.
Click to expand...
Click to collapse
Did you ever find a solution to this?, I have the desktop charger jobby. The grey one that looks like a docking station. It has an ac adapter and a usb out on it .. but like you the charger doesn't seem to work.
p.s its the one with the stylus that stands up straight at the back.
Nope.....
Never found a solution for it.
Dam...
Does your original jasjar/xda exec charger work? mine doesn't.. only my 5v dc 550ma motorola charger works ... oh and the usb direct cable works..
Does you pda charge while sat in the cradle with just the usb attached?
Here's what I have working:
FYI, I have the Qtek 9000.
Original Power Charger - working
Aftermarket Car Adapter charger from Proclip - working
Aftermarket Desktop Charger (AC powered) - NOT working
Aftermarket Desktop USB plug - working
Aftermarket USB cables - working (at least the ones I've tried = 3)
Joe,
I remember reading that you should be careful of what you plug in to power up your HTC-Universal because the voltage needs to be regulated.
Also, don't even go buy those Alkaline battery powered travel charger - they don't work. I even tried with a 9V Altoid Tin Battery Charger (with the required 5V USB regulator) and it didn't work.
I just gave up and carry 2 batteries with me. Planning on getting a bigger battery later on.
Hope that helps.
modem_man said:
Here's what I have working:
FYI, I have the Qtek 9000.
Original Power Charger - working
Aftermarket Car Adapter charger from Proclip - working
Aftermarket Desktop Charger (AC powered) - NOT working
Aftermarket Desktop USB plug - working
Aftermarket USB cables - working (at least the ones I've tried = 3)
Joe,
I remember reading that you should be careful of what you plug in to power up your HTC-Universal because the voltage needs to be regulated.
Also, don't even go buy those Alkaline battery powered travel charger - they don't work. I even tried with a 9V Altoid Tin Battery Charger (with the required 5V USB regulator) and it didn't work.
I just gave up and carry 2 batteries with me. Planning on getting a bigger battery later on.
Hope that helps.
Click to expand...
Click to collapse
Thanks for the reply,
Just checked on the web and the moto charger is regulated so it should be fine to use, I was thinking that my original charger may be buggered but because my new desktop charger doesn't work either I don't know what it could be. I'll need to try my cradle with just the usb attached tonight and see if it charges... if it does thats ok .. I can live with that.
My Cradle has a built in usb cable for the pc and a separate dc in socket for the wall adapter so unless it switches between the two i'm thinking that maybe the pins for charging are hardwired to the wall adapter and the data to the pc so it will only charge from the wall and not from the pc..
Maybe I shouldn't have bought such a cheap one
Joe,
I believe I might have the same cradle as you do.
I've open up the cradle to see how the connection is soldered and the points for the ground and powered seemed soldered into the USB port correctly.
I do remember reading something concerning the pins for the USB are wired differently (last 2 pins are shorted - on the Universal-wiki I think) for powered USB charge. Maybe that's why the cradle AC charger doesn't work while the USB cable works.
FYI, I've tried putting both the AC and the USB and you'll find that having the AC in is useless....you're just wasting electricity cos the PDA is still being charged by the cable (just turn off you PC and you'll find that the PDA is not charging).
Does your cradle have the annoying blue LED?
I think all aftermarket cradles are created equal = "CRAP"
If somebody out there have a cradle that have AC that works, please post where you bought it so that others will know which one to get.
modem_man said:
Joe,
I believe I might have the same cradle as you do.
I've open up the cradle to see how the connection is soldered and the points for the ground and powered seemed soldered into the USB port correctly.
I do remember reading something concerning the pins for the USB are wired differently (last 2 pins are shorted - on the Universal-wiki I think) for powered USB charge. Maybe that's why the cradle AC charger doesn't work while the USB cable works.
FYI, I've tried putting both the AC and the USB and you'll find that having the AC in is useless....you're just wasting electricity cos the PDA is still being charged by the cable (just turn off you PC and you'll find that the PDA is not charging).
Does your cradle have the annoying blue LED?
I think all aftermarket cradles are created equal = "CRAP"
If somebody out there have a cradle that have AC that works, please post where you bought it so that others will know which one to get.
Click to expand...
Click to collapse
Sounds like I have the same cradle as you fella , I've tried the usb on its own and it seems to charge ok .. I tested it by putting a movie on and leaving it plugged in, started at 67% its now 77% so its charging through the usb.. dam it .. I could probably send the cradle back since I wanted it mainly for AC charging. Wish there was another one I could get that worked!
Thinking of getting this one instead:
http://www.addonsworld.co.uk/product.php/28408/0/
What dya think?
joe....
According to this guy on this thread:
http://forum.xda-developers.com/showthread.php?p=1097137&posted=1#post1097137
his is working just fine.
If you can return it for another one, maybe you'll get one that's working properly.
i'm thinking maybe we have pda's from the same manufacture date.. and the hardware revisions are different and thats why our desktop chargers dont work, surely its not coincidence that both of ours dont work?
And if thats the case getting another of the same won't do much good.. theres just no way to be sure about any of this, think I may just send it back and try a different one entirely
Joe,
Good luck!
I have been trying to get hold of a working car charger for the Universal that would charge the phone while it is running navigational programs but to no avail.
If anyone has any for sale, do let me know.
vapor said:
I have been trying to get hold of a working car charger for the Universal that would charge the phone while it is running navigational programs but to no avail.
If anyone has any for sale, do let me know.
Click to expand...
Click to collapse
The car charger costs barely $5 in china and on ebay. It can be purchased from anywhere. I use the car charger that i got with my Holux GPS reciever. I have a lot of car chargers. This is how they work. You plug in your USB cord into the car charger and the car charger goes into the cigarette lighter in the car. I am not selling mine. Go get one from ebay. Just search on ebay for USB car charger.
nuclear said:
The car charger costs barely $5 in china and on ebay. It can be purchased from anywhere. I use the car charger that i got with my Holux GPS reciever. I have a lot of car chargers. This is how they work. You plug in your USB cord into the car charger and the car charger goes into the cigarette lighter in the car. I am not selling mine. Go get one from ebay. Just search on ebay for USB car charger.
Click to expand...
Click to collapse
I have done so and the thing, its either I'm having bad luck with them or there's something wrong with my phone. The best I ever got was that it charged the phone when it was OFF but when I switched it on, the charge disappears.
I tried using my GPS's car charger and another USB Car Charger as well but they both do not work and I do not know why.
I have spent so much searching for the right car charger which is why I am so desperate now just to get a second hand one that would definitely work.
vapor said:
I have done so and the thing, its either I'm having bad luck with them or there's something wrong with my phone. The best I ever got was that it charged the phone when it was OFF but when I switched it on, the charge disappears.
I tried using my GPS's car charger and another USB Car Charger as well but they both do not work and I do not know why.
I have spent so much searching for the right car charger which is why I am so desperate now just to get a second hand one that would definitely work.
Click to expand...
Click to collapse
I think you'll find this has been discussed here before, try searching.
FYI, I used the charger from my Holux GPS, and whilst it works, it dosn't charge whilst using TomTom. If you try a long trip with this setup, you will find that the battery charge drops. This charger is good only for topping up the Uni whilst not in use. I use the genuine iMate charger and this does run TT and charge at the same time. You need the higher amperage of the iMate charger.
Mav
mavrik64 said:
I think you'll find this has been discussed here before, try searching.
FYI, I used the charger from my Holux GPS, and whilst it works, it dosn't charge whilst using TomTom. If you try a long trip with this setup, you will find that the battery charge drops. This charger is good only for topping up the Uni whilst not in use. I use the genuine iMate charger and this does run TT and charge at the same time. You need the higher amperage of the iMate charger.
Mav
Click to expand...
Click to collapse
Nope, my car charger works fine in charging the Universal while in use and turned off. It just charges a bit slower while in use and thats quite an obious reason.
Only thing to consider is how much the output levels are of the car charger.
Thanks for your input guys
I have done my research on the car chargers and from my understanding, the only reason could be the shorting of pins 4 and 5, or something along those lines. Other than that, I have tried out various models of chargers and they do not work.
For those who say you need a higher output, I have tried those rated at 1000mAh which is that charger output for the wall unit. This charger connects to the USB cable yet even when I tried a couple of types of USB cables, it still did not charge the phone.
I also used a lower output of 850mAh and it worked fine with the cables tested abouve, so it shows the cable had no problem. But it could only charge the Universal when the phone was turned off. When switched on, the phone does not even charge, not even in the least bit and I am not sure why. Surely 850mAh is more than enough to get it charging while on the navigational (TomTom) programs because when I connect my Universal to my laptop to charge, I am still able to run TomTom and that charge is only rated at 500mAh.
Thus you can see why I am so frustrated with all these charges. If any of you are able to point me in the direction of getting an original chrager online, I would be more than grateful for your help and guidance. I also wouldn't mind buying a third-party charger as long as it works perfectly with the phone when running nagivational programs.
This is the one i have. works brilliantly, charges universal and BT GPS reciever and lets me use my copilot navigation software.
http://www.easydevices.co.uk/sp/searchbox13/products.asp?partno=MTCUSJASJR
http://www.mdapro.co.uk/shop/xcart/T-Mobile-MDA-PRO-Handsfree-Custom-Car-Kit-with-speaker-pr-36.html
vapor said:
Thanks for your input guys
<snip>
I also used a lower output of 850mAh and it worked fine with the cables tested abouve, so it shows the cable had no problem. But it could only charge the Universal when the phone was turned off. When switched on, the phone does not even charge, not even in the least bit and I am not sure why. .
Click to expand...
Click to collapse
Well, I can only guess the 1000mAh you tried may have been defective???
My car charger is the iMate genuine car charger. This rated at 1000mAh and works great. It charges and runs TT6 no problem. (well, that was untill it packed up the other night so I'm sending back under warranty) But it did work great.
All the best
Mav
Poundland have a USB car adapter that works perfectly with your USB lead to charge the Exec - works fine on mine!
mavrik64 said:
Well, I can only guess the 1000mAh you tried may have been defective???
My car charger is the iMate genuine car charger. This rated at 1000mAh and works great. It charges and runs TT6 no problem. (well, that was untill it packed up the other night so I'm sending back under warranty) But it did work great.
All the best
Mav
Click to expand...
Click to collapse
I thought that could be the case but it charges my GPSr fine so had to strike that one out.
wassa said:
This is the one i have. works brilliantly, charges universal and BT GPS reciever and lets me use my copilot navigation software.
http://www.easydevices.co.uk/sp/searchbox13/products.asp?partno=MTCUSJASJR
http://www.mdapro.co.uk/shop/xcart/T-Mobile-MDA-PRO-Handsfree-Custom-Car-Kit-with-speaker-pr-36.html
Click to expand...
Click to collapse
Hi Wassa you se co pilot - so do i - so please can you tell me what onthe easy devices what you chose for the correct cable that will owrk with the bluetooth gps unit.
cheers mate - thanks for your help.
lr
re: car charging problems
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery
mickey_jaw said:
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery
Click to expand...
Click to collapse
nah I do not smoke so I do not see why it should be happening.
mickey_jaw said:
just one thing to ask: are you a smoker?
I only say this because i use a usb car charger and it only charges faster than it drains if you are careful to blow/clean all the fag ash out of the socket in the car to get a good connection. Otherwise the charging led sometimes comes on but cant supply enough power to charge quicker than my universal drains its battery
Click to expand...
Click to collapse
I never get ash in there. Its impossible to get ash in there unless you really want it there. You are supposed to use the knob and not stick your cig in there. lol
I have used a Belkin one, one that I bought for an iPod that has a standard USB socket you can plug any cable into, and a cheap ebay one.
They all work, BUT.. you have to plug them in when the device is off. Once the charge light comes on, you can turn it on, and it will charge, although slowly.
If you plug it in while the device is on, it will not start charging.
I don't know why this is, but considering it's the same on all 3 chargers, and I have seen people complaining about this on the Universal a few times, I think it's just the way things are.
AlanJC said:
I have used a Belkin one, one that I bought for an iPod that has a standard USB socket you can plug any cable into, and a cheap ebay one.
They all work, BUT.. you have to plug them in when the device is off. Once the charge light comes on, you can turn it on, and it will charge, although slowly.
If you plug it in while the device is on, it will not start charging.
I don't know why this is, but considering it's the same on all 3 chargers, and I have seen people complaining about this on the Universal a few times, I think it's just the way things are.
Click to expand...
Click to collapse
Yup because at first i was wondering too why my device isnt charging. Actually the charge light on my GPS came on quicker than the Universal.lol... i had to wait for a few moments and kept trying till the universal began charging. So yeah you gotta wait with the universal shut off.
I have not bothered reading all the replies but the problem with most car chargers is the AMPS, the voltage is right @ 5 volts but the amps is usually 0.5. Ideally the universal needs 1 or 2 amps, the new tomtom standalone units use 2 Amp USB car chargers and are a direct fit for our universals !!! isnt that convenient.
I don't have a charger as such but I use - strangely enough - a sony psp usb cord that goes through a USB cigarette adapter picked up from a poundshop here in UK ( a shop that sells lots of cheap gadgetry - for the non british of you )that also has a connector that is exactly what is needed for my fortuna bluetooth . it works fine . I realise that it does not recharge the phone but keeps it charged . I've not tried the usb to usb mini through the usb lighter adapter though . I guess that the trick its to have a charged universal before you leave on a trip .
I found I was having trouble charging my Universal with a USB adaptor in the car. The "charging" light would only come in if the phone was off, and while it would stay on when the phone turned on, it would not actually be charging and the damned thing would eventually run out of charge (I drive lots).
I eventually realised that if I turned the screen brightness down to it's lowest illumination whilst charging it worked fine. Obviously not much power comes out of the socket...
Now my battery has packed up due to another issue, but turn the screen down and it should be fine.
Voltage Regulator 5v / 2a /
I have read with interest all the comments and solution here and thought it might help to add mine what I have made and fitted to all my vehicles is a mini USB power supply, simply cut the pc plug from a mini USB lead and add one UA 78S05
VOLTAGE REGULATOR 5V / 2A /
http://www.donberg.ie/descript/u/ua78s05.htm
Connect the input leg to 12 v dc bolt the regulator to a GOOD earth/heat sink (car body) and off you go up to 2 amps @5v BUT DO TEST WITH VOLT METER BEFORE CONNECTING PPC
Whenever I plug my Desire in an AC outlet, it charges ridiculously slow. I check the battery status and it says "Charging (USB)" (not AC) and USB Debugging pops up. My wall adapter says it has an output of 1000ma. Is the chord bottle-necking the charging speed or is it the adapter? I am using the chord that came with my phone but I bought a new adapter to fit my countries outlets.
Same problem. I would like a resolution to this also.
There is allready a thread concerning this issue and it has the solution your looking for.
mercianary said:
There is allready a thread concerning this issue and it has the solution your looking for.
Click to expand...
Click to collapse
I have looked on the forums and it should seem like I should get regular AC charging on my Desire. I have a 1000mah charger and I am using the USB cable that came with my phone. I am wondering why I do not. I looked at my USB (fat side) pins and they are shortened. I have included an image of my charger.
if the adaptor says it supports iPhone etc then that is why the USB debugging symbol is coming up.
because that symbol is up it will only charge at 500mA max (the phone thinks it is in a PC, it doesn't wnat toburn out the USB port).
if it is a cheap adaptor, the voltage regulator may be limited to 100mA. thats what happened with me.
either way, in my eyes you have 3 choices.
1. buy a new adaptor
2. put a new voltage regulator in the adaptor (a friend did this for me)
3. use a converter so the adaptor you have will work in your wall.
nzdcoy said:
if the adaptor says it supports iPhone etc then that is why the USB debugging symbol is coming up.
because that symbol is up it will only charge at 500mA max (the phone thinks it is in a PC, it doesn't wnat toburn out the USB port).
if it is a cheap adaptor, the voltage regulator may be limited to 100mA. thats what happened with me.
either way, in my eyes you have 3 choices.
1. buy a new adaptor
2. put a new voltage regulator in the adaptor (a friend did this for me)
3. use a converter so the adaptor you have will work in your wall.
Click to expand...
Click to collapse
O I didn't realize if it was branded to work with iPhone it would charge slowly. Thank you for your help. Next time I'll watch out for a "Works for the iPhoney."
Bump
I would like to know how it ended?
I have a same problem, the only difference is that i have stock HTC AC charger with separate USB cable (stock too). When plugged to AC it shows "charging(USB)". Tried different cables, same result. Tried two different AC adapters, but both were from NOKIA, same result...
This might help your slow charging issue
If the wall charger is causing your phone to charge in a USB state, the charge time will be very long compared to a normal AC charging state which I'm sure you are aware of. A cable called QuickCharge might help. It will enhance USB charging to AC charging. You can find it on Amazon by searching for 'QuickCharge'. It's the 2nd or 3rd item down.
My new Nexus and it's charger have had a falling out:
My charger won't charge my phone, but charges other people's phones. And other people's chargers charge my phone!!?
What's really weird is that my charger charges my phone when it's switched off but I've done a data wipe and it still won't work once the phone is powered on, so my question is:
What the motherf*ck?
Anyone seen this before?
I rooted, clockworked and installed paul obrien's customised ROM with the volume fix and extra menu and search buttons. And my phone was fine. I've got other chargers knocking around, although they're not the same. Should I be worried?
b b b bump?
Sent from my Galaxy Nexus using Tapatalk
djcr33p said:
b b b bump?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Please dont bump threads especially after such a short time its considered spam and can end up with the thread being closed.
What charger are you using to try and charge your Nexus? Mains or usb? I only got a usb cable in my box and they are pretty much just standard micro usb cables. You should also be able to use any 5V mains to usb converter which you plug the usb cable into to charge your device so as long as you can find some combination that works then I wouldnt worry too much about it.
However if you are concerned then send the phone back for a replacement while you are able to.
Mark.
You'd think the first place you'd go to would be Google or Samsung. Why wouldn't you give them a call first?
I have found that some of the lower power (1 amp or less) chargers are having trouble with the larger phones with bigger batteries. Interestingly, my old SGS2 desktop cradle/charger wouldn't charge the SGN (which fits into the charger - sticks out a bit but the phone sits on the mini-USB fine) with the charger that came with the desktop cradle. I replaced it with the higher powered (10W?) usb charger that came with my ipad2 and, lo & behold, the phone will charge.
Not sure if this helps or not but I've discovered that not all chargers are created equal.
Yea, some of the higher powered phones/tablets won't charge over the lower power chargers... hence why tablets won't charge over a PC-USB connection.
Sounds like the charger is faulty... unless nothing charges the phone.
hotleadsingerguy said:
You'd think the first place you'd go to would be Google or Samsung. Why wouldn't you give them a call first?
Click to expand...
Click to collapse
Thanks for that stellar advice, and if the issue hadn't followed rooting and rom-ing my phone and hence invalidating my warranty, and not occurring prior to the fact, then maybe I would've. And just for the record, have you ever called Google regarding an issue with your phone?
EZ
mskip said:
Please dont bump threads especially after such a short time its considered spam and can end up with the thread being closed.
What charger are you using to try and charge your Nexus? Mains or usb? I only got a usb cable in my box and they are pretty much just standard micro usb cables. You should also be able to use any 5V mains to usb converter which you plug the usb cable into to charge your device so as long as you can find some combination that works then I wouldnt worry too much about it.
However if you are concerned then send the phone back for a replacement while you are able to.
Mark.
Click to expand...
Click to collapse
Sorry, if I wasn't clear (and for spamming the forum?) but I got a UK SGN via phones4u on o2 and I received in the box a USB cable and an AC wall charger with a USB socket on it.
I don't think you guys are getting how weird this is:
If I connect my Nexus to a PC with the USB cable that came with it, it doesn't charge.
If I connect the USB to the supplied AC wall adapter and plug it into my phone it doesn't charge.
If I connect anyone else's smartphone phone to my Nexus charger, be it just USB cable or with AC it charges.
And if I connect anyone else's USB cable and/or charger to my phone it charges!?
My phone will charge from the supplied kit only when it is powered off, hence a software issue and not a hardware issue which is why I didn't call Samsung.
I've done a factory reset, I've restored to backups made prior to the issue occurring. I haven't admittedly done the full unroot and stock restore as yet and would rather not. I just wondered if anyone else here had experienced weirdness with the supplied charger?
Many thanks guys, sorry for the sarcasm earlier, it's just that I'm not lazy, I read and read up on things before posting questions. And I've posted very few questions on XDA since I registered here after buying my Milestone. I'm only posting in the general discussion thread so didn't think it'd be a big deal if I bumped this. The reason I did is I only have a limited time before I no longer qualify for a hardware replacement from the supplier if I claim it faulty. (which I kinda don't think it is)
EZ
djcr33p said:
Sorry, if I wasn't clear (and for spamming the forum?) but I got a UK SGN via phones4u on o2 and I received in the box a USB cable and an AC wall charger with a USB socket on it.
I don't think you guys are getting how weird this is:
If I connect my Nexus to a PC with the USB cable that came with it, it doesn't charge.
If I connect the USB to the supplied AC wall adapter and plug it into my phone it doesn't charge.
If I connect anyone else's smartphone phone to my Nexus charger, be it just USB cable or with AC it charges.
And if I connect anyone else's USB cable and/or charger to my phone it charges!?
My phone will charge from the supplied kit only when it is powered off, hence a software issue and not a hardware issue which is why I didn't call Samsung.
I've done a factory reset, I've restored to backups made prior to the issue occurring. I haven't admittedly done the full unroot and stock restore as yet and would rather not. I just wondered if anyone else here had experienced weirdness with the supplied charger?
Many thanks guys, sorry for the sarcasm earlier, it's just that I'm not lazy, I read and read up on things before posting questions. And I've posted very few questions on XDA since I registered here after buying my Milestone. I'm only posting in the general discussion thread so didn't think it'd be a big deal if I bumped this. The reason I did is I only have a limited time before I no longer qualify for a hardware replacement from the supplier if I claim it faulty. (which I kinda don't think it is)
EZ
Click to expand...
Click to collapse
Bumping this thread since I'm having almost the exact same problem and found this thread after searching. How did you solve it?
My situation is like this:
If I connect my Nexus to a PC with the USB cable that came with it, it does charge.
If I connect the USB to the supplied AC wall adapter and plug it into my phone it doesn't charge.
If I connect anyone else's smartphone phone to my Nexus charger, be it just USB cable or with AC it charges.
And if I connect anyone else's USB cable and/or charger to my phone it charges!?
My phone will not charge from the supplied kit when it is powered off.
Feels very wierd, the other two chargers I have tried were a 700mA ZTE Blade charger and a 2A Asus Transformer charger, both are charging my Nexus perfectly fine.