Do any of the WM6 roms support Vodafone (UK) VM notifications? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Never managed to get it working with the WM5 roms - I wondered if anyone had got them working with any of the WM6 Roms.

I have the same question. I never managed to solve this problem

I thought the voice mail notifications was network dependent... a signal they send that activates/de-activates the icon?

Dont know if its relevant - but might be worth checking out this thread:
It discussed VM notfications on Orange, but if you are having problems with WM6 that were not apparent in WM5, using the WM5 version of sms_providers.dll may help.
http://forum.xda-developers.com/showthread.php?t=299072

philg2000 said:
Dont know if its relevant - but might be worth checking out this thread:
It discussed VM notfications on Orange, but if you are having problems with WM6 that were not apparent in WM5, using the WM5 version of sms_providers.dll may help.
http://forum.xda-developers.com/showthread.php?t=299072
Click to expand...
Click to collapse
Tried that unfortunately - no good :-( I tried the sms_providers file from the v1605 and that doesn't work either, so there's something in the Rom elsewhere as well.

What happened under Wm5?

petes said:
Tried that unfortunately - no good :-( I tried the sms_providers file from the v1605 and that doesn't work either, so there's something in the Rom elsewhere as well.
Click to expand...
Click to collapse
When I tried this the 1st time it didn't work, the second time it did, you need to delete all your voicemail 1st and after installing the cab, and copying the dll leave the device on for a couple of minutes then turn off completely. turn on your device and it should then work.
Good luck
R

Related

WM6 (vanilla) VoiceMail Indicator :s

Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
I get a different character, for deactivate - its a full size triangle. Again, on Orange UK.
I'll try and run thru installing all the WM5 orange cabs to test on Sun - I've got our Wedding celebration party tommorow! I'll get my ass kicked if I go near it before then.......
Congratulations!
Yeah I get the same full triangle, sorry. I've seen it abbreviated to ^ on a couple of other forums so used that, but it is actually a complete triangle.(Alpha symbol?)
joehood said:
Hi there
Bored of scrolling through massive threads, maybe it's time we separate some of the issues now. Starting with...
Voicemail indicators not working correctly in WM6.
So, what are your experiences? If yours work, let us know, if not, post what happens.
I'm on Orange UK and I get an SMS from '[email protected]' and '^@' to activate/deactivate the indicator respectively.
I've been googling, and haven't found much about these messages. I think they're supposed to be Class 0 but not sure. Does anyone know which part of the OS is in charge of sorting them out and interpreting them?
Maybe this is a simple reg setting that's missing? Could someone with WM5 and on an operator using vmail notifications run a search through their registry for '[email protected]' and '^@'?
Cheers
Click to expand...
Click to collapse
Yep, I have exactly the same problem with the XDA-Live 0.1 ROM. Using Orange UK.
Couldn't delete the second message. I kept getting a message about the a SIM error. Reboot of the phone and the message had gone.
Anyone worked out a fix?
No Voice Mail
Hi all,
I have the same issue with Orange UK as the rest of you. I am supprised that no one has a solution yet. Will keep an eye on this post for a fix !
I cant spend any time on this at the moment.
Setting [HKEY_CURRENT_USER\System\State\Messages\vmail\Line1\Unread]
"Count"=dword:00000000
clears the notification..
Also once in this state I dont get the initial text, but I do get the vm icon! Something keeps setting the count value to -1 which seems to get it messed up.
Cant find out what processes the notification, but it looks like its something in the base of wm5 as non of the ext rom programs seem to have any effect.
I have no problems with new voice mail indicators, missed call, new sms notifications, etc. All show up correctly. Using Cingular/AT&T..
Maybe the issue is only orange based on the previous comments???
Thanks eagle 1.
If anyone has voicemail notifications working on Orange in WM6 please post, as I'll know I'm doing something wrong.
I've tried all the customisation cabs and nothing's worked so far.
The problem is that the current WM6 rom does not support CPHS this is a set of commands that include the MWI (Message Waiting Indicator), Orange are the only provider in the UL using this feature. I feel the issue is that the bases ROM currently being used by the chef is not a final RTM of WM6 as it is missing a few features that the RTM should have. I used to have the issue when upgrading Nokia roms but with those it was a simple fix through LogoManager.
For more info on CPHS see http://www.phonescoop.com/glossary/term.php?gid=220
Thanks, that's great that we have an answer now to why it doesn't work. I guess the obvious thing to do is just wait until the final ROM's released, unless anyone with a bit more knorr-how knows of a way to add CPHS features to WM6...
Can someone try this workaround.....
http://www.miousers.co.uk/viewtopic.php?t=144&highlight=dialmonitored
Just dropping by, I'm flat out at work, cant spend any time on this at the moment, but stumbled over the above...This allows the device to clear the count as soon as you dial your VM, not pretty, but a temp fix...(assuming it works!)
(also found this on msdn..... http://msdn2.microsoft.com/en-us/library/aa457989.aspx)
and perhaps even editing CEMAIL.VOL may be another route....
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
One thought as to the VoiceMail indicator and differences between Universal & Hermes versions of WM6.
I was wondering if this is something that is dependant on the radio rom.
I am using the Orange radio rom on my Universal but as far as the Hermes is concerned I've left it with the 1.16.00.00 rom which I think was from prof's SIM & CID unlocker v2a
Interesting...
That could be it. Frustratingly, I updated my radio ROM at the same time as installing WM6 so I can't isolate the problem. I'm using the 1.35 radio ROM that's on the FTP. I suppose this could be where orange make their voicemail customisations.
Is anyone running an Orange radio ROM with WM6? Can you please post your success with voicemail notifications?
I am on WMXL 0.2 and left my radio on the original orange radio of 1.06.00
Since upgrading to WMXL 0.1 and 0.2 I have NOT had the spool icon - but have received the system sms's. So I don't think its radio dependant.
I haven't however run any of the orange ext rom cabs as one or more of them made my wmxl 0.1 unstable - whereas loading wmxl 0.2 and then manually entering data connections etc has given me a fast stable device (without voicemail spool icon!).
Bump......
Anyone had any luck with this yet?
Taz69 said:
This isn't a problem with all versions of WM6.
As well as a SPV M3100 (Hermes) I also have a SPVM5000 (Universal) also on Orange and the notifications work perfectly on the Universal.
SPV M3100 - XDA Live 0.10
SPV M5000 - Midget 0.1
I'll try to compare registry settings see if I can spot anything obvious
Click to expand...
Click to collapse
Could you post or PM me the 'sms_providers.dll' file from the windows directory on your SPVM5000 so I can compare it to the one on the M3100 - I think this may be where the problem lies
Looks like it is down to the version of sms_providers.dll as also reported here.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
I'll post the file from the SPV M5000 rom if still needed(They are of different size) but it will be after the weekend when I'm back home.
See post #16 from olipro on this thread, all sorted now and working perfectly.
http://forum.xda-developers.com/showthread.php?t=299072&page=2
You do need the developer certs installed to use the fix though (link in the thread) and you may have to rename the new dll and do some registry editing - all the info you need is in the linked thread.

Orange UK Only - What's Best Radio with WM6?

Could I please be so greedy as to have a Orange-UK only thread?
I am been reading and searching in earnest to see what other peoples experiences are with the various Radio ROMs. It seems most people are happy with 1.38.00.10, although seems to be a few instances of people sticking with older versions because of battery life/drop outs/data freezes. But I am unable to establish what other people are experiencing in the UK on Orange's network.
I am well familiar with the Radio ROM 1.38 + WM6 - good or bad? thread, but not many people in there commenting on Orange UK.
If you are on Orange UK, please can you share you experiences here?
My own experience has been thus.
Before upgrading to WM6, was on stock M3100, which had Radio 1.06 I beleive. This worked flawlessy with push email (Exch 2003), and never had any problems at all with it. This was also the case when I upgraded to LVSW 20070315, leaving Radio Rom as was.
Then I upgraded to Black 2.0 last week, and did the Radio to 1.34 with it. I didnt notice any problems at first, or rather didnt take much notice of not getting email notifications whilst at work. But on Friday I realised the Data connections were freezing.
I have tried going to 1.38.00.10, to 1.35, back to 1.06, even 1.27. Have also tried going back to LVSW 20070315, and am now on LVSW 20070408
I have narrowed it all down to the "common" problem in swicthing between GSM and 3G. At home I seem to be between 3 transmitters, and swicthing is common. Hence the problems I was having Friday.
The Excellent commmgrpro has helped here. Also Bandswitch.
Anyway, with Phone set to GSM only I have no problems. Odd thing is, driving to Sheffield and back yesterday (dont mention the football!!), with phoen set to Auto, I had no problems at all.
Yet at home, and at work, on auto the data connection freezes.
So.... Whats everyone else using on Orange?
i've been using rom 3.23.0.2 with radio 1.38.00.10 on a spv m3100. this device is been freezing like you described in your post, thing is, it's become unuseable since you have to reboot after the freeze and it happens almost continiously... driving me insane.
if anyone knows of a way how to get back wm5, i'd appreciate it!
freben
When I upgraded a while ago I was wondering the same thing. The only negatives re 1.38 at the time seemed to come from orange UK customers so I went for the 1.27 radio and it seems fine.
Have not yet stepped up further, and at the moment, see no reason to.
Especially as I can even get the H now and then. (If it aint broke...)
@Phil, I've "gone black" (v 2.0) with Radio 1.38.00.10 - only since Saturday, so it may be too early to tell. I've got a push email account with Mail2Web, which I don't tend to use that regularly - it's good for aggregating lots of mail stuff when I go away on business, but my data package ain't up to much (don't get me started ) so I only switch it on when required.
Since installing the new ROM/Radio/SPL, my M3100 seems to be much better than it was prior to the update. I've reinstalled all my apps (apart from PPCProfilesPRO - I'll do that tonight) and the phone seems really stable - no more random lockups when taking it off charge and only a couple of "slowdowns" when ending calls, or if Activesync'ing....can't really complain if I'm honest
I'll keep an eye on things - and maybe switch on the Exchange push email for a couple of days - and I'll post again if the situation changes.
Cheers,
Mark.
PS - Message for @freben; read MrVanx's guide on downgrading to WM5 - see THIS POST for details of how to find it.
MrVanx kindly provides a guide here: http://www.mrvanx.myzen.co.uk/hermes_guide/Downgrade/
Do please read very carefully before trying it
Yep...1.27 for me. No real radio problems to report.
Spent a couple of weeks with WMXL 2.0 and the last two weeks with Black 2.0. Both work fine with Orange with 3g (inc HSDPA) and voice. Direct push/web/pop email all fine.
One freeze this morning (first one in two weeks) but dont know if it was radio or os or an app?
Can;t compare with other radios but simply can say am happy with 1.27 (hence why I havent tried 1.38 etc)
Having no problems with set up in sig.
had the freezing with the stock set up.
Could/should we be more scientific here and use one of the many web2.0 survey sites to do a ROM/OS survey to find the right mix?
with a little effort we could then find the most reliable Radio ROM and view by Country/OS/carrier/etc.
just a suggestion..
Mark Crouch said:
but my data package ain't up to much (don't get me started ) so I only switch it on when required.
.
Click to expand...
Click to collapse
@Mark,
try Orange World Browsing, 8ukp for unlimited data access 24/7
Give O a call on 150 and then the billing option, 4
Orange World Browsing is what is what the O rep told me it was listed as. I think one of the key points is the cost, it’s 6.81 exc VAT or 8 inc VAT, that’s the way to check you have the right package.
And you need to be on a 35ukp per month tarif or more to get it.
apologies for off topic post!!
(I was told it was Orange World Unlimited)
unwired4 said:
(I was told it was Orange World Unlimited)
Click to expand...
Click to collapse
My bill confirms it as Orange World Browsing -although I too thought it was OWU.
Not sure if it is still so hard to get as it once was.
Sheep_Head - Well, I am definetely up for using a survey site - any recommendations?
I gave re-flashed my phone back to Black 2.0. Seems to be what most people are using here (IMHO). Have tried Radio 1.27, 1.38.00, and right back to 1.07.
With a totally clean device (i.e. straight after flashing), setting up the orangeinternet connection manually, the thing just wont connect to 3G. Only when I have Band set to GSM will it connect.
Jeez!
I am now in the process of going back to an Orange WM5 rom, to see if it makes any difference, (albeit the Romanian one, so will have to reset the internet connection).
Getting mildly frustrated now.
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
philg2000 said:
OK, I'm now back to Orange Radio version, and Orange WM5 -(Romanian!)
Entered Orange Internet settings. And have gained nothing. COnnects via GSM, but not via 3G.
Grrrrrr....
Spoke to Orange CS - no reported 3G problems in my area (well, what about me???).
What's the panel's opinion on sending a phone back to O with OliPro's bootloader on it? (well, and the Romanian Rom, but they prob wouldnt spot that).
I have insurance etc, so would get a replacement in advance....
Click to expand...
Click to collapse
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Hey guys - mega useful thread.
I 'thought' I had solved all of my woes and was feeling bloody smug with myself as I thought I had managed to keep the stupid questions down to a minimum. After reading this obviously not .
I am running Black v2.0 (happily) and the rest of the handset is as per my sig block but I have removed spb pocketbooks and replaced it with shell. I thought it was all working correctly but I am suffering the same connectivity issues as yourself (gprs and not 3G).
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Anything I can help with or test let me know and I will do what I can.
Bezman.
wberesford said:
Also - and I have read the threads but still not working (was going to try again after a re-re-re build I still have no VM notifications.
Bezman.
Click to expand...
Click to collapse
I have just tested the voicemail fix again since my reinstall and the certificates cab plus installing the sms dll has always worked for me.
Are you having any specific issues with it?
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
mrvanx said:
dude as a last ditch attempt can you try out flashing LVSWs latest ROM?? Make sure your settings are good and post the results?? (it wont take long)
Click to expand...
Click to collapse
Hmmm... I dont think that will achieve anything. I have had the latest LVSW ROM on there a while bad, with the same problem.
I'd really like to hear from anyone who has returned a flashed M3100 to Orange.
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions.
Bezman.
Click to expand...
Click to collapse
The only way I have done this recently is using Resco File Explorer. You need to go into the Options menu to ensure you can see all files, then copy the sms_providers.dll into the \Windows directory. It warns you, but if you say yes it lets it happen. I have done this numerous times (have flashed my phone about 10 times recently!) without any problems!
wberesford said:
CrazyC,
I am struggling with the whole copying over of the .dll file in the widows directory. Like I said I have done a search of the wiki on VM notifications etc and followed the directions. I have attempted using Activesync but keep getting a response saying that the destination is in use. I have tried directly on the handset (not expecting it to work) and it doesn't and finally I tried by using Total Commander. Still no joy. I will keep going with it though as I was thinking about building again from fresh anyways, and then attempting the vm notification from clean.
Gonna wait out for black v2.5 before I do that however.
Cheers for getting back to me though!
Bezman.
Click to expand...
Click to collapse
First few times I did this, it just copied OK with the file explorer. Most recently tho it gave me the same error - so I went to the zip file on my ppc and told it to extract directly to the windows folder, said yes to overwrite and it did. Maybe worth a try. (install the certs first incase it makes a difference.)
SMS Providers CAB
To make my life easier I put the sms_providers.dll from WM5 into a CAB. To install make sure you've installed the sdk certificates (http://forum.xda-developers.com/attachment.php?attachmentid=35814&d=1174572298) first and then install this cab - a soft reset is requested at the end of installation and is required.
I've tested this on the latest LVSW ROM and it works perfectly, hopefully will overcome peoples issues with copying this file.

i have upgraded to LVSW(2007/04/23) RUU_Hermes_WWE_3.30.0.1 and now work like hell

2 weeks ago i have upgraded to lvsw latest rom release and is the worst release (sorry for that m8).... manny apps doesn't work.... and even the last one before this was much better :|.... and any1 can help me how can i get back to the original orange rom... like when i buyed from the storage? thank u....
Hey, this is bull**** - can u specify which apps etc? I am using LVSW 20070423 from the first day of release and no problem...
This ROM is pretty damned good - so slow operation is probably something you've got installed.
To go back to your original orange ROM (PRESUMABLY wm5) you first need a copy of the original ROM, then follow Mrvanx's guide.
http://forum.xda-developers.com/showthread.php?t=299462
maddogydog said:
2 weeks ago i have upgraded to lvsw latest rom release and is the worst release (sorry for that m8).... manny apps doesn't work.... and even the last one before this was much better :|.... and any1 can help me how can i get back to the original orange rom... like when i buyed from the storage? thank u....
Click to expand...
Click to collapse
MaRaHoX said:
Hey, this is bull**** - can u specify which apps etc? I am using LVSW 20070423 from the first day of release and no problem...
Click to expand...
Click to collapse
lol... i know is bull****... prob is when i m tryin to call ... i hear 2 sounds ... and that`s it ... and office give me this error "Program Not Recognised" .. anyway ... now i am with the previous of lvsw rom
Problem during a call I supposed in GSM part, which is indipendent on LVSW's ROM (maybe other causes - 3rd party app, bad A2DP mod etc.) - but primary try new RADIO ROM.
Office works me well - I just try it before a few secs (immediately after HR) and its ok?
I am using phone daily for hard work and no problems, you mentioned.
Some unstability was caused by wrong Page Pool, but I suppose, that it is not your case.
LVSW ROM is very good, I like it compared to others. Try installing a new radio and try a hard reset or reflash it.
Remember LVSW bundles the Radio along with his ROMs, could you please tell us your Radio version??
mrvanx said:
Remember LVSW bundles the Radio along with his ROMs, could you please tell us your Radio version??
Click to expand...
Click to collapse
@mrvanx, LVSW 20070423 is an OS-only distribution. He recommends that Hard-SPL-v7 and Radio 1.41.00.10 be installed beforehand (links provided). A deviation from his previous ROMs.
John
maddogydog said:
2 weeks ago i have upgraded to lvsw latest rom release and is the worst release (sorry for that m8).... manny apps doesn't work.... and even the last one before this was much better :|.... and any1 can help me how can i get back to the original orange rom... like when i buyed from the storage? thank u....
Click to expand...
Click to collapse
What do you mean many apps doesn't work? All apps works on mine..IMO, LVSW's rom is the best. There must be something you didn't follow correctly or you installed some bull**** 3rd party apps. I am sorry if that offense you.
LSVW 423 is a great ROM - fast with all the bits I want and none of the bits I don't want, but I'm having issues with hanging on soft resets (about 10%) of the time as well as freezing and not able to resume from suspend. I have had these issues with most if not all the WM6 ROMs and can't figure it out.
Anyone else with similar issues?
Meanwhile orange have released a new WM5 AKU3.3 rom on their business site.
I've had no issues with LVSW 4/23 rom. I use the phone heavly during each day for the office and I never had experienced any issues. LVSV rom is the most stable in my opion. All apps are working as they should.
I only down graded my radio back to 1.40.30.00 cause of stability and the fact 1.41.xx.xx kept dropping my calls between 3G to Edge, not to mention weaker signal. Fact, 1.40.30.00 is I beleive the offical ATT radio release ATM (I might be wrong, something more official may be out).
Did you read the entire forum before flashing? As Johnburn mentioned, LVSW repackaged to OS only and given specific instructions to Hard-SPL-v7 and Radio before the OS only ROM due to issues on the his first post of the full package.
I think you're the only who has bad experience w/ LVSW release and you blamed it on the ROM. way to go.
khammo01 said:
LSVW 423 is a great ROM - fast with all the bits I want and none of the bits I don't want, but I'm having issues with hanging on soft resets (about 10%) of the time as well as freezing and not able to resume from suspend. I have had these issues with most if not all the WM6 ROMs and can't figure it out.
Anyone else with similar issues?
Click to expand...
Click to collapse
yep exact same issue right here.
LOVE the roms, hate the fact that I keep freezing in suspend with all wm6 roms.
thought it was my phone till I flashed back to wm5, and its working perfectly again.
charbz said:
yep exact same issue right here.
LOVE the roms, hate the fact that I keep freezing in suspend with all wm6 roms.
thought it was my phone till I flashed back to wm5, and its working perfectly again.
Click to expand...
Click to collapse
What do you have installed??? Also please note if installed programs are on the DEVICE or MEMORY CARD. What today items do you have??? And did you have cabs in the extended ROM??? All of these things will affect the device and could possibility cause it to lock up. Any whos I have no problems with WM6.
charbz said:
yep exact same issue right here.
LOVE the roms, hate the fact that I keep freezing in suspend with all wm6 roms.
thought it was my phone till I flashed back to wm5, and its working perfectly again.
Click to expand...
Click to collapse
to fix the freezing go to:
start-> settings-> today-> items(tab)-> and set the today timeout to 12hr
stukes said:
What do you have installed??? Also please note if installed programs are on the DEVICE or MEMORY CARD. What today items do you have??? And did you have cabs in the extended ROM??? All of these things will affect the device and could possibility cause it to lock up. Any whos I have no problems with WM6.
Click to expand...
Click to collapse
I always installed EVERYTHING on device memory. Nothing on storage card (even though it worked fine with Wm5 for anything other than Today apps).
I thought it was my applications so I went back to scratch. Even no apps installed and even with SD card removed, it fails to wake up from sleep if anything other than Exchange Activesync tried to use the radio while it was asleep.
Main culprits include IMAP mail sync and weather app syncing. You can verify this by setting sync interval to some ridiculously low value (every 5 minutes) and then watch a sitcom or something. It will be locked by the time it's over. (Hey, I just looked down and whaddya know, my phone is locked again).
There are some files laying around in extended ROM but They are not installed on hard reset. Are you saying they might be interfering nevertheless?
I hear rumors that LSVW 3/23 does not have this problem so I'm going to try that one last time. If I can't resolve it, I'm going back to WM5.
webpain said:
to fix the freezing go to:
start-> settings-> today-> items(tab)-> and set the today timeout to 12hr
Click to expand...
Click to collapse
Hmm... seems an unlikely fix. Is this verified to work? What about just unchecking the Today timeout box altogether? I'll give it a try...
EDITED:
I tried the Today timeout fix and it still locks up.
@khammo01
Good to see you have tried to isolate the problem. However you say that a fresh install also locks up. If this is true then the problem is deeper. Have you tried each Cooked ROM? I have and only by preference choose Black2.5. So far the only lock-up I have had came from a today plugin. WHich I should have put on the DEVICE instead of the CARD. At times the Active Sync appears to be sluggish but it is only right as it connects. Then all is well. Verify your download and try again.
stukes said:
@khammo01
Good to see you have tried to isolate the problem. However you say that a fresh install also locks up. If this is true then the problem is deeper. Have you tried each Cooked ROM? I have and only by preference choose Black2.5. So far the only lock-up I have had came from a today plugin. WHich I should have put on the DEVICE instead of the CARD. At times the Active Sync appears to be sluggish but it is only right as it connects. Then all is well. Verify your download and try again.
Click to expand...
Click to collapse
I have tried LSVW, Black 2.0, 2.5, Dutty, Custel, you name it. They all have the sleep error.
If I have IMAP or anything enabled that uses the radio when the device is asleep, I get lockups.
Basically I cannot enable anything useful. I'm going to try LSVW 3/23 (pretty much the only ROM I haven't tried) and if that doesn't work, I'm going back to WM5.

Anyone installed Black 3.0.1 on Vario II (T-Mobile)?

I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Yes and it worked perfectly.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
Its fairly easy, all you really need are the internet and mms settings, look for a thread with operator settings in the title and find a cab file called t-mobile uk fixed.
Just drop it on to a storage card and run it whenever you do a hard reset or flash a new rom version.
Cant see why you would need the other t-mob customaizations as they mostly suck eggs.
Edit:cab file attached below
Here's the cab
Just drag to your Vario and run it.
chrisjasper said:
Its fairly easy,
Click to expand...
Click to collapse
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
yes, working fine here, all connection settings set manually.
bobbyelliott said:
Thanks Chris.
Let me get this right. Upgrade to Black 3.x. Copy CAB to device. Run CAB. Voila? This sets everything I need?
I agree most of the T-Mobile extras are crap but I need the settings for Internet/GPRS/MMS/SMS etc.
Cheers.
Click to expand...
Click to collapse
Yep. I actually have a directory setup on my sd card called rebuilds with the cabs I need to reset my ppc up after flash/hard reset. Generally takes me about half an hour now to set up everything, including restores of pim records
chrisjasper said:
Generally takes me about half an hour now to set up everything, including restores of pim records
Click to expand...
Click to collapse
I'm with Orange and my flashing routine now is:
1) flash new rom
2) run pimping changes
3) manually enter gprs and mms settings
4) sync with 4smartphone exchange server
5) run smsproviders cab off Storage card (to sort voicemail)
6) install spb pocket plus and customise today launchers
7) set up two pop mail accounts
8) sign in and configure windows live messenger
Got it down to about 15 minutes now (but it does help that exchange server syncing is so damn quick.)
I tend to install things like Reader that like a soft reset so it takes me a little longer.
sinmae said:
yes, working fine here, all connection settings set manually.
Click to expand...
Click to collapse
Is it as fast as people say? Did you notice a speed improvement when you installed it?
MDA Vario II works with Black 3.01, what about rSAP?
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
It works a treat, however when i goto use Live Messenger it cannot connect and doesn't present me with a login form like it did with Black 2.0... Is anyone else having trouble with this? I'm using a Vario II, i've tried connecting over 3G, Wireless and through ActiveSync, all with no joy,
The service may be down, mine works without any hitch. Then again, I haven't and never do install any other third party software.
bobbyelliott said:
I'm currently running Black 2.5 (the T-MOB variant) and everything is fine.
But I'm tempted to upgrade to Black 3.x before I re-install all of my apps on my Vario (the speed improvement sounds good).
Has anyone with a Vario/T-Mobile installed Black 3.x? I see that there isn't (and will never be) a T-Mobile variant. What will I lose with a generic install? How hard is it to customise it for T-Mobile (UK)?
Thanks in anticipation.
Bobby
Click to expand...
Click to collapse
All working ok for me, web'n'walk back working and exchange server sync'd ok. TomTom OK. Calls OK...
Only problem I have is connecting to a WPA2 WLAN.... maybe me.... maybe the Black 3.0 (2.5 worked ok). Need to spend sometime looking this evening.
Justin
TomTom
Justin, I take it you have the app TomTom on your mobile, rather than being a 910 or similar?
I took one of the other WM6 ROMs and the DUN (data transfer) has been removed so I can only use it as a hands free device and not to update traffic over GPRS.
vido said:
Hi there,
Just as it has already been mentioned earlier (upgrade to 3.01 on T-Mobile MDA Vario II). I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Speed actually seems faster than before. The question I have got now is what happened to the rSAP (Remote Simm Access Profile) as I need to ensure that I can use my phone in my "troublesome" Mercedes CLS. Never was able to pair it with the car so i'll be testing it tonight. I just noticed that the rSAP seems to be missing.
Any help on this will be greatly appreciated.
Vido.
Click to expand...
Click to collapse
I gave rSAP a try with an earlier black build, and I'm sorry to tell you that it behaved exactly the same as WM5 with the Merc car kit - i.e. just doesn't work (even once you've hacked the stack to make the Hermes look like a phone). If you get anywhere, it would be great to hear, but I'm afraid I think the Merc kit is just toooo limited in what it supports.
vido said:
I took the plunge today and installed version 3.01 straight from WM5. I was initially a bit apprehensive being my first update since I got the phone and I can confirm that it works well. I simply had to add the 3G and MMS settings back or just use the T-Mobile cab to get everything back to normal.
Vido.
Click to expand...
Click to collapse
Hi Vido.
I hope you read the extensive guides mr Vanx has done on upgrading. If not, consider this a stern warning to do so *now* (link in my sig)
Your post suggests that you did not put on the olipro bootloader which means you are taking a risk flashing any OS rom onto your phone - if something went wrong, you would brick your phone.
For you and anyone else reading this, please read Mr Vanx's guides and save yourself, and everyone else, the headache of trying to recover your phone as this stuff voids your warranty.
Cheers,
Smiffy.
ok guys im on tmobile usa and mms doesnt work at all on any of the new wm6 roms. do you guys suggest that i try the uk settings
Hi, you need to check this thread http://forum.xda-developers.com/showthread.php?t=299023
If USA not on here go to your T-Mobile website and do the settings manualy or get them from tech support...
Then post in the above thread!
Martyn
Hi Smiffy/All,
I actually followed all the instructions regarding upgrading to WM6 by flashing all the instructions in Mr Vangs guideline and used the 1.40.olipro bootloader. I just didn't type in all the details because of space. What I meant was that this is my first attempt at upgrading to WM6 after reading all the instructions in this forum.
Like I said my phone still does not work with the Mercedes Bluetooth UHI which is a pain and one of the reasons why I performed the upgrade. The other thing I have just noticed is that my ohne now finds it difficult to connect to my wifi at home using simple WEP key. I was only able to connect to my wifi at work only once after which it doesn't connect anymore. Has anybody else encountered this problem or is it only me.
Last question, is it possible to have the VOIP (Sip) work with T-Mobile? it shows up as "Service Blocked" and I read it somewhere that this can be tweaked. does anyone have the settings for testing this?
Apart from that the Black edition 3.01 is really cool.
Regards,
Vido.

Windows Mobile 6 (Black 3.1) and Orangeworld

Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
all these fantastic genius's here, and no ideas?
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
philg2000 said:
I have noticed this too, and it must be something to do with what PIE reports itself as for User Agent.
The sites work fine with Opera, but cant see if that reports as Mozilla for whatever.
We need someone with WM5 to look....
Click to expand...
Click to collapse
I use PIE+ and tried all the user agents, but no change. Also noticed gprs/3g connection is real unstable! I'm in london, so definately a good coverage!
Erm....?
Any ideas?
What is the URL? Assume you have "show pictures" set etc ? I have black 3.1 on T mobile (well, virgin) and connection seems stable. This is on a m3100
Yeah I noticed this before too... I've only installed Black up to 3.0, so it the problem existed in at least version, maybe earlier.
http://wap.orange.co.uk for orange world. WEorks in opera fine. in PIE every other site i look at displays correctly, only orange so far is appearing as plain text.
As for the connection, i'm using the latest radio upgrade. to be honest, the connection was pants when i had the standard os installed, but then upgraded the radio, which improved it. But now i upgraded the os, the connection is worse than ever.
Also, Skype refuses to log in!
I'm pretty much ready to the sell piece of $h1t on ebay and get something else!!
So nobody able to help me?????
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
orangeinternet
crazyC said:
I don't use Orangeworld. Sorry. Have not had this issue. What apn are you using, the orangewap one or the orangeinternet one?
Click to expand...
Click to collapse
I dont think its down to that in any case, coz it works fine with Opera.
yeah I know, just grasping at straws. I seem to remember that some of the orange sites only worked via the orangewap apn. never use them so dunno really.
Hi, sorry am unable to help as I have same on orangeworld, but would just recommend that before you sell, you try reverting the radio version to 1.38.0.10 or .01.
Makes it a whole different phone, no dropped signals, better battery.
gibster said:
Hi,
Just upgraded my rom, and for some reason, when i go the the orangeworld site in pie, it only displays a text version. No graphics or anything.
Any ideas?
Click to expand...
Click to collapse
Yeah, no problems - orangeworld works fine in PIE for me WITH graphics (after I fixed it of course!!)
First I would recommend the latest Orange Radio ROM which is 1.38.00.01 - works best for Orange UK (this is not necessary for my fix to work though.)
See my cab file which installs the Orange UK MMS and internet settings as well as fixing the voicemail icon issue and the orangeworld graphics issue
If anyone needs it, I suppose I could create a cab file containing just the fix for orangeworld on PIE
Ok, here is the cab to just fix the Orangeworld site on Orange UK - it also fixes the voicemail icon since this is kinda essential
This should work on all WM6 ROMs on Orange UK
ps. you DO NOT need this file if you are using the cab file in the post above
Thanks alot Rabdo!!! I'll try the radio downgrade when i get home!!! Orange now works a treat!!!
Thanks!!
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
rabdo! my wife can have your babies if you like!
radio fix and settings cab have sorted me right out!
keep getting the "H" symbol. did a quick test and was close to 500kbs! not sure how reliable that is, but just browsing now is a dream, and no connection dropped!
thanks a lot!
gibster said:
Just a quick question. What was the problem? It almost looked like it didn't pick up the css or something, but the strange thing was the fact every other site i looked at was fine. Would be nice to know exactly what was up with it.
Click to expand...
Click to collapse
I have a similar problem on 3 UK in that none of the icons on Planet 3 show up - is this cab something generic that might fix my problem? My phone is working nice and smoothly and the moment so don't want to install it just in case.....

Categories

Resources