Related
Hi ppl,
i recently recieved a kit from Navigon, Navigon Mobile 4 with a BT GPS mouse.
I got the mouse bonded as a serial slave on com 5 & 6 and seems to be recognise by the software because i recieve at least the TMC messages.
but i got no GPS signal.
does anybody ever tryed this GPS on a qtek 9090 ?
is there a specific tool i need to install on my pda for the BT manager (options are quite poor in the BT manager)
any ideas ?
thks
Navigon needs VTG data from the GPS to work. If you have a GPS powered by a SIRF chipset it is easy : go to www.gpspassion.com and download a freeware to do the job.
i dont really know about the gps reciever furnished by navigon, there are no information about the hadware in the package, or user guide
If you have the Navigon GPS and not a non branded Navigon GPS, the issue is not the VTG...
i have the navigon BT GPS + TMC, the tmc works i recieve the signal in the software correctly, but i do not recieve any gps signal
i guess it comes from the com ports, but i really do not know how to solve that problem
i found the response, Qtek 9090 has a wildcomm BT modem so it requieres a patch available at the support page of navidon.de web site
hi out there! i´m still waiting for my artemis (german version is not out by now). can any body tell me, if it´s possible to use tmc on the artemis (fm-radio antenna is on board) for example with the MobileNavigator 5.
thx
Interesting thought and I did read somewhere a while ago that this was possible, having messed around with the device it is not possible let me explain:
1/ You need the Artemis powered up to run TomTom properly in a car long journeys will just flatten the battery.
2/ The FM Radio ONLY works IF the headphones are plugged in (they provide the aerial) - you cannot simultaniously charge the device and use headphones as they use the same connection point on the Artemis.
3/ The only traffic option offered by TomTom Nav 6 on the Artemis (even with headphones plugged in) is for a GPRS connection.
To be honest this would have been the ultimate package, IF they had managed to get it to work (I am not sure they even considered it to be honest) but I doubt fitting the TMC receiver parts into the Artemis would have been easy - food for thought for the manufacturers though? - Mike
thank´s mike! just found the eten x500 glofiish. its nearly the same device but better processor and tmc works. is that because the fm-reciever in the eten supports rds?
I doubt that its down to the FM part being RDS compatible the Artemis can use RDS as well. Most TMC receivers working in the FM band contain additional electronics to process the data into a usable form, if this electronics isn't in the hardware I don't think it will work. Mike
Well, i think this device is not perfect for using TMC.
I tried the FM9 antenna from GNS (German company who provides TMC) and currently it does not work so the only possibility is to use a BT TMC antenna which is totaly stupid due to the reason
1. the Artemis has already built-in GPS
2. the BT TMC antenna is very expensive >200€
I will try TMC on that device with the headphones as soon as i find the headphone input
NO TMC
Guys, what are you talking about?
TomTom itself does NOT support TMC in Navigator software. Why do not read the TomTom website before put any efforts: (cite):
"Question
Will there be support for TMC in a next or upcoming release of TomTom Navigator software ?
Answer
TomTom continuously strives to include the best possible functionality in our products and to deliver new features. However there are currently no plans to provide TMC in TomTom Navigator software. We recommend that you register on our web site and sign up for our newsletter, so we can keep you informed about future releases and upgrades. "
"Question
Can I use the TomTom RDS-TMC Receiver with all TomTom products?
Answer
The TomTom RDS-TMC Receiver can be used with the TomTom GO 910/710/510."
Of course you might to use the different navigation software, than I apologies, but the original question was about the TMC + TomTom.
Interesting, I have been trying to figure out if traffic alerts are free on the tmobile service with the compact III. The following review seems to indicate that, but no mention of it on the tmobile site itself. Anyone verify this? Seems like no need for a separate TMC device if u have this?
http://www.coolsmartphone.com/news2810.html
Available with CoPilot® Live 6 satellite navigation*, the MDA Compact III makes dedicated navigation systems redundant, with turn-by-turn voice instructions, detailed street mapping and powerful route calculation for navigation in-car or on foot. With its integrated jog wheel and touch screen, the device makes it easy to enter a destination and follow the comprehensive door-to-door directions. Web’n’walk customers will be able to take advantage of free real-time traffic alerts and avoidance, delivered directly into CoPilot via the T-Mobile GPRS network.
RalphLauren said:
Guys, what are you talking about?.......
"Question
Can I use the TomTom RDS-TMC Receiver with all TomTom products?
Answer
The TomTom RDS-TMC Receiver can be used with the TomTom GO 910/710/510."
Click to expand...
Click to collapse
Ralph, you are quite correct, however some stupid sales adverts did state the "Built in FM Radio could be used for Traffic information over RDS" - what I was pointing out, is that this idea - whilst nice is not a possibility - Mike
I read somewhere that the gps included in the artemis was able to retrieve rds/tmc signal, but that still a rom update was necessary to enable that feature...
Why GPS receiver should support TMC? It's pointless.
TMC information is provided via FM Radio with RDS signal. Artemis has built in FM RDS Radio - and nothing more is required.
Except proper software, of course.
Whether it is possible in Artemis to switch on TMC function? In it in fact is FM a tuner with RDS, and TMC the information is transferred through RDS.
For as far as I know, the P3300 does not have TMC. Unfortunately
You cannot use the inbuilt radio for TMC - it simply cannot perform this function, you can get TMC via GPRS and subscription to the service.
I did read some pre device release information that claimed the P3300 could do TMC via its internal radio, but I think the article was typical media hype (or more accuratly they didn't know what they were talking about).
The inbuilt radio will support RDS (which on the Arte gives basic channel names) - that is about the limit, if you want traffic information look at your options for GPRS connectivity and prices - Mike
RDS data IS accesible from applications - look at FM Radio application.
It means, that other application can access RDS data too - including TMC information.
Would you like to enlighten us how you get RDC TMC information from the in built Radio on the device? - Mike
What XCRIME means that similar Pdas with built in gps inc TMC works.
TMC (Traffic Message Channel) provides a anticipatory route optimization. TMC is a special application of the FM Radio Data System (RDS), constantly sending up-to-the-minute traffic information and weather data, that are being received by the TMC receiver. The navigation systems ( like Navigon MN5 )matches these data with your route within seconds. If there is congestion ahead, it automatically offers you an alternative route.( source the Navigon site)....
At the moment the Eten 500 & 500 with built in GPS & tmc module + supports tmc using the Destinator ot Route 66 navigation systems ( both support Royaltek–Protocol ) using the headphone as an antenna to recieve the tmc broadcasts.Only drawback is that you can only hear sound/ instructions via the head phone in this instance...
I expect that the Artemis will have an update to allow us to use this function.
Hello,
maybe it will work with one of those TMC adapters from GNS (e.g. GNS TrafficBox Universal maybe)?
GNS TMC adapter info
GNS TMC adapter shop
Anyone tried those?
Regards
Poseidon5150 said:
Hello,
maybe it will work with one of those TMC adapters from GNS (e.g. GNS TrafficBox Universal maybe)?
GNS TMC adapter info
GNS TMC adapter shop
Anyone tried those?
Regards
Click to expand...
Click to collapse
Hi, and welcome...
The issue in this thread is how we can use the inbuilt FM RDS tuner on the P3300 to receive TMC, and use the information in for example Tomtom or some other navigation application.
Regards,
PK
paalkr said:
Hi, and welcome...
The issue in this thread is how we can use the inbuilt FM RDS tuner on the P3300 to receive TMC, and use the information in for example Tomtom or some other navigation application.
Regards,
PK
Click to expand...
Click to collapse
Hi and thanks for the welcome. I understand the issue of this thread, I just thought it could be a workaround to get TMC to work until someone find a solution or a patch is released to use the internal radio for TMC.
I don't have one of those myself, just interested if someone already tested them with the Orbit/Artemis? Ok, maybe I will open a new thread on this later...
Regards
You can forget TMC in combination with TomTom. If I remember correctly TomTom uses it's own TMC network or something like that. In order to get the traffic information on your TomTom you need to use the service TomTom is offering, ofcourse they are going to let you pay for that service.
Mobile Navigator uses the normal TMC which comes with the standard RDS.
But for now it's not even possible to get that working. I personally doubt it will come availible, because if it would I think HTC had already mentioned it somehow.
TomTom use iTIS holdings for their traffic service, this information is broadcast over the Classic FM network within the UK (99.9 to 101.9FM - dependent upon location). Classic FM coverage isn't too good, low signal strength etc, couple that fact with the poor quality aerial supplied as part of the headphones with the Artemis and TMC (if it were possible) would simply never work IMHO - Mike
Isn´t there somebody with a P3300 who can contact HTC in order to ask whether RDS EON/TMC will come availible in the future?
@Bart1981: Why do you ask, if anybody could ask HTC?
Perhaps, YOU can ask?!
Realflo said:
@Bart1981: Why do you ask, if anybody could ask HTC?
Perhaps, YOU can ask?!
Click to expand...
Click to collapse
Lol I tried but the mail returned to me with the awsner: Don't know what to do Seemed they missed some sort of number.
You can send an e-mail throughout the Support section, but then you need to fill in an IMEI number of your P3300, and guess what, I don't have a P3300
So that's the reason why I asked if somebody else could ask it for me. But if you have the right e-mail adres for me, I'll be happy to ask it for everybody on this forum
TMC on P3300 way to activate (worked with my Eten G500)
Hi,
The TMC function works with Route 66 Navigate 7 and some other soft.
If you really want TMC and don't want to pay for it, don't use tomtom, it's as simple as that, it's only a paid gprs connection.
Route 66 is as good as tomtom (only street selection is not so user friendly) and it has a free TMC function.
Just plug in the earphones (=tmc antenna built in!) otherwise it won't work. Scan the FM radio for the RDS posts and normally you get some texts after a while about traffic jams, accidents, .... interesting!
It worked with my Eten G500, still have to test it on the P3300, but this is the way of working. If it doesn't work, you probably need the newest firmware upgrade, found on the ftp of xda developpers.
If you don't want to use the earphones as antenna, you can get a 'wurfel' antenna on ebay from Germany, from 3.5mm jack to small antenna. I hope they are developping a carcharger with TMC antenna, like you can find allready on ebay from other brands like garmin, though it's expensive, about €70
Cheers,
Innovator
I use Route 66 on my unit but I have only ever obtained TMC via GPRS are you sure yours is actually using the radio? - try turning off the phone and see if it still receives data - Mike
Innovator said:
Hi,
If you don't want to use the earphones as antenna, you can get a 'wurfel' antenna on ebay from Germany, from 3.5mm jack to small antenna. I hope they are developping a carcharger with TMC antenna, like you can find allready on ebay from other brands like garmin, though it's expensive, about €70
Cheers,
Innovator
Click to expand...
Click to collapse
Can you post a link for that antenna ? Cause i'm looking for something like that.
Thanx
Is anybody tried the tmc function?
TMC on Artemis/P3300
Any news on trying to get TMC on Artemis/P3300?
// Patrik
RoyalDemoTMC
i have come over this software from ETEN all work on my Artemis but not the TMC mabe some one can work it out to work
Hello friends!
I searched in the whole Artemis forum about the pairing between htc3300 and MB bluetooth car kit SAP V2 but it seems there isn´t a fix to this problem.
Anybody knows if there is solution to this problem (new rom, patch, software, etc)?
Thakyou in advance and sorry for my bad english
Best regards
Nope, I am afraid there is no solution for this. I had the very same problem and learned the hard way that htc3300 doesn't allow SIM access, so you need to get the handsfree bluetooth unit from Mercedes (ebay search "Mercedes bluetooth hfp" shows you the prices). With this unit, your htc operates as sender and receiver, you can't use your Mercedes phone antenna. That's the downside, but the upside is that you can use your htc as navigation system during bluetooth connection in the car (which you couldn't if SAP had taken control over the device)
Hi everyone.
I have been doing an excessive reading looking for a way to have traffic info on Trinity, besides Google maps. Both iGO and TomTom provide TMC related navigation, and igo supports MSN direct as well. The problem is our Trinity lacks FM receiver for the service.
TomTom offers TMC over GRPS services. It is offered only in Europe (I am in the US) and the service in California for TomTom is, how to say it, 'not accurate' .
So I am with iGO8 and I am pretty happy with it. Now I am looking into a solution for TMC or MSND. Yes, I saw the GNS solution of adding a FM receiver and sending the signal over blue tooth, but it isn't going to work for me, as I can't add it between my radio and the antenna unless I pay some major $$$ to an Audi to do it (or lose warranty...). There will be an external unit in Q1/09 but what i am really into is to have the service emulated by code. Did any of you have found a TMC or MSND service through GPRS service? I am looking into a paid service (sure, free would be better) like MSND offers, but I have the hardware obstacle to pass...
Ah, one more thing- never tried to connect a BT device to a COM port, and have hands free at the same time... I would like to find out if this is working or not, as I suspect the BT gateway on Trinity may have hard time with it while on call. Not that I care if TMC/MSND flow will stop while on a call if it resumes automatically after..
Thanks in advance.
BigE said:
Hi everyone.
I have been doing an excessive reading looking for a way to have traffic info on Trinity, besides Google maps. Both iGO and TomTom provide TMC related navigation, and igo supports MSN direct as well. The problem is our Trinity lacks FM receiver for the service.
TomTom offers TMC over GRPS services. It is offered only in Europe (I am in the US) and the service in California for TomTom is, how to say it, 'not accurate' .
So I am with iGO8 and I am pretty happy with it. Now I am looking into a solution for TMC or MSND. Yes, I saw the GNS solution of adding a FM receiver and sending the signal over blue tooth, but it isn't going to work for me, as I can't add it between my radio and the antenna unless I pay some major $$$ to an Audi to do it (or lose warranty...). There will be an external unit in Q1/09 but what i am really into is to have the service emulated by code. Did any of you have found a TMC or MSND service through GPRS service? I am looking into a paid service (sure, free would be better) like MSND offers, but I have the hardware obstacle to pass...
Ah, one more thing- never tried to connect a BT device to a COM port, and have hands free at the same time... I would like to find out if this is working or not, as I suspect the BT gateway on Trinity may have hard time with it while on call. Not that I care if TMC/MSND flow will stop while on a call if it resumes automatically after..
Thanks in advance.
Click to expand...
Click to collapse
You can buy a Bluetooth Gps mouse with tmc so it would be the best for you. I think.
Well, adding any hardware to an 'all in one' device is kind of defeating the purpose. I am specifically seeking a software solution, emulation, a signal over GPRS kind of solution. It seems there isn't one and I wonder why. After all, at least for MSND, it sounds kind of logical. BTW - XM radio has the MSND signal embedded, but again, no clue how to communicate it to the trinity...
So adding hardware isn't a great one, but thanks of the offer. I have considered it before posting and turned it down. I'd like a phone in the pocket without running wires, battery operated devices, etc. I may be dreaming, but hey, even the new diamond , touch HD and fuze suffer the same problem, I think. I know the Diamond has FM radio, but still no TMC or MSND...
Hey Man ,
I've installed the GNS module in my Audi A3
realy easy so you should be able to do so. maybe explore that option some more.
GreetZ
Which GNS module?
The more I look for a solution, the more I am convinced a TMC over bluetooth is the solution... The only thing is I have no clue which is the right one to buy...
Neo-morpheus, assuming we have the same connections needed, what was the one you have purchased from GNS?
Hi there, i have just purchased the GNS 5870 Bluetooth TMC, although its for my touch HD i will let you know the progress.
BTW i never found any other way with any software to connect TMC through the radio, it just doesn't work at present. Some say it recognise's through IGO8 but does not connect
Hope this helps
Argh ... looking for the GNS 5870 for a while ... could you tell me where you bought it ?
GNS trafficBox FM9 and trinity
Hi folks,
OK, listened to the advice on this thread, i have purchased a TMC reciever from GNS. I have a Trinity (WM6.1) phone and I use iGO8 R3.
Setting up the TMC receiver in iGO returns only one thing- TMC hardware not found. There are 3 variables (can be auto or manually set): TMC protocol, COM port, and Baud rate.
I am in the USA (California to be exact). Is there a way to make it work? Even if there isn't a TMC signal, why does the phone claims no hardware found?
BigE
Well, I think that the first thing you have to do is to establish a "connection" between your PDA and your Bluetooth TMC receiver. From your PDA:
- start/parameters
- choose the connexion tab
- start the bluetooth application
- switch on your TMC receiver,
- select "add a new machine" (don't known the exact wording, I've got WM 6.1 French version),
- when recognized, select your TM receiver and then click next
- enter the authentication code (if requested ... usually, it is as simple as 0000 ... should be part of your TMC receiver documentation),
- after that, you should associate a port number to your bluetooth TMC receiver (don't remeber exactly how to do that but this should be done from this application ... anyway: google is your friend )
After that, start iGO8 and move to the TMC configuration page. If the automatic detection does not work then:
- select GNS,
- select the port number you have just chosen
- select a bitrate (or keep "auto" ...)
And that should work
@+
JBM
BigE said:
Hi folks,
OK, listened to the advice on this thread, i have purchased a TMC reciever from GNS. I have a Trinity (WM6.1) phone and I use iGO8 R3.
Setting up the TMC receiver in iGO returns only one thing- TMC hardware not found. There are 3 variables (can be auto or manually set): TMC protocol, COM port, and Baud rate.
I am in the USA (California to be exact). Is there a way to make it work? Even if there isn't a TMC signal, why does the phone claims no hardware found?
BigE
Click to expand...
Click to collapse
jbm31 said:
Well, I think that the first thing you have to do is to establish a "connection" between your PDA and your Bluetooth TMC receiver. From your PDA:
- start/parameters
- choose the connexion tab
- start the bluetooth application
- switch on your TMC receiver,
- select "add a new machine" (don't known the exact wording, I've got WM 6.1 French version),
- when recognized, select your TM receiver and then click next
- enter the authentication code (if requested ... usually, it is as simple as 0000 ... should be part of your TMC receiver documentation),
- after that, you should associate a port number to your bluetooth TMC receiver (don't remeber exactly how to do that but this should be done from this application ... anyway: google is your friend )
After that, start iGO8 and move to the TMC configuration page. If the automatic detection does not work then:
- select GNS,
- select the port number you have just chosen
- select a bitrate (or keep "auto" ...)
And that should work
@+
JBM
Click to expand...
Click to collapse
Looking to do the same thing with my ATT Fuze and HTC Advantage. I'm using IGO8 R3 and have my eye on the GNS 5870.
BigE, JBM can you confirm this working and comment on any issues? Could you post any pictures, video or screen shots?
Thanks
not sure that GNS 5870 is already available (mass production: Q1-2009). I used to use a Royaltek TMC+GPS receiver with IGO8-R1 but this one is now out of order now.
Gns bt gps+tmc
datruth ,
Can't confirm, as I did not buy it. I don't see a reason to spend 120 Euro, plus shipping (another $25) . The trinity (and the Fuze) have built in GPS, and i hate carrying two devices instead of one. if I was going to have a GPS external, i wouldn't bother buying a device with GPS..
I tried having TMC only added. With the serial port solution i failes, as it sems most HTC devices do not host the serial port (hence both the GNS device and the phone are clients) . GNS tech support offered my to send it back. i did not make up my mind yet what I am going to do. In the meantime i am trying Zeno's serial port host driver as the trinity supposes to ahve the hardware for it, but it looks like client and host have different wiring to the USB connector, as it still does not work. GNS claims only BT is the solution. I was too busy to take it on, so in the meantime, all I can confirm is serial port will not work for most of us.
correction: GNS 5870 available since Feb 2009. Waiting for mine (delivery in progress).
Is TMC a free service in the US?
I read on another site that even if I had a compatible TMC receiver for my HTC Advantage running iGo8 I would still need a subscription to get traffic updates. Is this true? Has anyone been able to get traffic working at all in the US.
I was under the assumption that the TMC service was similer to GPS. It's broadcast everywhere and you just need a receiver to take advantage of the service. Am I wrong in my thinking?
This is a reply I just received from the company GNS.
thank you for your inquiry. Yes, the GNS GPS-RDS/TMC-Receiver 5870 (see: http://www.gns-gmbh.com/shop/xtc/pr...DS-TMC-Receiver-Bluetooth-32-channel-GPS.html ) works also with the navigation software iGO8 and HTC Advantage 7500. But you can use the GNS TrafficBoxPlus-FM9BT-Y (see: http://www.gns-gmbh.com/shop/xtc/index.php?language=en& ) as external Bluetooth TMC-receiver, which is less expencive then the GNS receiver 5870.
PS: Please check if your navigation software (and maps) supports the american TMC service.
Best regards
Gerd Sept
How many BT can work simultaniously?
I wonder if I am purchasing the BT device and pair it to my phone, can the HTC device handle both TMC signal and a BT headset at the same time?
From GNS I was told the USB version I have will not work with Trinity because the USB is a client and not host on most phones. I tried installing Zeno's usb to serial and it does not work on my phone. I still can not identify TMC hardware.
As for iGO and American TMC, I guess the folks writing iGO took care of it, as they support so many different protocols, there is no reason for them not to identify the American TMC.
And if there is a paid service? Not that I know who offers it in the US. I assume it is off air and all it takes is a receiver, but since I did not have any success connecting, it is just a guess.
BigE