Gizmo setup for WM6 and TYTN - 8525, TyTN, MDA Vario II, JasJam ROM Development

I have TYTN with Schaps WM6 ver 3.57a
Has anyone know how to configure the VOIP to support Gizmo project?

i second that

When I had Schapps I never set up VOIP, but with Black Dymond way back when I downloaded and installed the SipConfigTool and set username at my Gizmo number 1747XXXXXXX, password as your own password, and the gateways as proxy01.sipphone.com (same for sip server, domain and realm if asked). If you use another tool and can set a stun server, set it to stun01.sipphone.com. Schapps probably has his own voip settings tool, but if you run a search on the SipConfigTool I'm sure it will still do the trick.
I was never very happy with the WM6 voip on any provider, and have since relied on fring, which I felt worked better especially for receiving calls reliably. See www.fring.com for more info. I've got multiple call in numbers in several countries through both Gizmo and Skype all of which I route through fring which I use with a 3G connection. Depending on the connection there's some mild latency, but I never miss a call and the Gizmo connections are far superior to anything I was able to get with just the WM6 client or Skype.

Quist you right also with Schap's Gizmoproject SIP account is working well for me with Shap's 3.54c
Shap's have the built-in SIP confiuration tools under "system tools"
please note that you can replace your number with your account name.

Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.

I'm pretty sure your username needs to include the domain. These settings are for a different phone, but should apply the same.
Profile Name: sipphone
Service Profile: IETF
Default Access point: [your WLAN AP name]
Public user name: sip:[email protected]
Use Compression: No
Registration: "Always on"
Use Security: No
--
Proxy Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [You SIPPhone password]
Allow loose routing: Yes
Transport Type: Auto
Port: 5060
--
Registrar Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [Your SIPPhone password]
Transport Type: Auto
Port: 5060
My q

vdub144 said:
Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.
Click to expand...
Click to collapse
put the registrar and the proxy the value - proxy01.sipphone.com:5060 / UDP
edward

edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?

gthing said:
edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?
Click to expand...
Click to collapse
user account: 1747[my sip number]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
also enable the option in Schaps VoIP Settings
in options Enable VoIP over 3G
or if you use only wifi connect first to the network
i am using schaps 4 RC with this configuration and it work ok
edward

Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?

gthing said:
Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?
Click to expand...
Click to collapse
1.The settings are not reseting when i reset my phone
2.dont have this problem

Gizmo5
Gizmo just launched a midlet for it's service.... I have it but haven't check to see if it works yet... this could be a good solution for some.
http://www.gizmo5.com
I think it what it does is call your phone first and when you pick up it calls the other phone... not 100% on that though.
Mark

Where do I put stun settings?

okay got it to work, however
, I need to use g.729 codec, is there anyway to do so?

how to open .jad
i got Schap's 4.0 there is no midlet service. so could i install the gizmo execution program such as .jad. by the way, anyone can tell me how to open the .jad on tytn.
thank you very much.

Related

GPRS Prblem

Rogers Canada MMS/SMS/GPRS Settings?
Hi sorry if I sound like a real newbie but I am. I have only used a Blackberry for the last 5 years and nothing else.
I currently have a Blackberry on Rogers in Canada, and will be getting my Dash tomorrow, I will unlock it with imei-check, what else do I need to do in order to have it work like my blackberry, I get my email from a couple pop accounts and my work outlook which does support owa web mail. right now I sync my calendar and contacts with desktop manager.
Is it worth installing BB Connect and just get my emails like on my blackberry or is it better it use the Dash email tools? when using the Dash can I change my reply to address depending on the email account I recieved the email in?
How do I find my rogers settings for MMS/SMS/GPRS??
Thanks for any help! This forum is awesome!
G
Rogers
You should be able to point your ActiveSync server to your OWA server at work. Generally that works just like your BBerry if you enable Push Email (under the comm manager on your dash).
Thanks I tried that, but it won't let me sync to the owa server for some reason, most likely my it guys have blocked it.
I installed BB Connect and it wirks for receiving but I can not send it is greyed out.
here are the settings:
Click Start/Settings/Connections/GPRS
click Menu, choose Add
Description: Rogers WAP
Connect to: wap network
Access point: goam.com
User name: wapuser1
Password: wap
Primary/Secondary DNS: 0.0.0.0 (leave unchanged)
Ip address: 172.025.015.041
When you finish click Done.
Then make another new connection:
Description: Rogers Internet
Connects to: the internet
Access point: internet.com (vpn.com - for those like me who pay extra $10/mth. for real IP address)
User name: wapuser1
Password: wap
Everything under leave blank
After you click Done create one more new connection:
Description: Rogers MMS
Connects to: WAP Network
Access point: media.com
username: media
password: mda01
Pri-dns: leave blank
sec-dns: leave blank
ip address: leave blank
When you finish click Done.
From the connections menu select "Proxy"
Menu/Add
Description: Rogers WAP Proxy
Connects from: The Internet
Connects to: WAP Network
Proxy (name: port): 208.200.067.150:9203
Type: WAP
User name/password leave empty
Click Done.
(Proxy connection is not mandatory - things will work without it too)
Then go to home screen, click Start/Settings/Connections click on Menu select Advanced
Internet connection:
Automatic
Work connection:
Automatic
Wap connection:
Automatic
Secure wap connection:
Automatic
(it may be already like this)
Then launch Messaging (press on that button with the letter)
Select any of the listed accounts, click Menu, choose Options, then select Account Options/MMS.
Put the checkmark on these items:
Retreive Immediately;
Save sent messages (your choice actually);
Allow delivery reports;
Allow read reports.
Set Number of attempts to 2
Put Photo resolution to: QVGA (320*240)
Then click right softbuton "menu" and select MMSC SETTINGS
Again right soft buton - Menu/New
Name: Rogers MMS
MMSC URL: http://mms.gprs.rogers.com/
WAP Gateway: 172.25.0.107
Port: 8080 (or 80 - both worked for me)
Connects via: WAP Network
Max. Sending Size: 250K
WAP Version 2.0
I got this from www.howardforums.com
Thanks very much!!
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Cruisin1966 said:
I've entered all the settings you've listed and have been able to send an MMS, but cannot receive. Any thoughts as to why? It appears that the device won't connect to retrieve any messages.
Click to expand...
Click to collapse
It appears the problem was with my SIM card the whole time. I can't receive MMS on any phone, Rogers branded or not. Once I put my wife's SIM int he phone, the normal settings I've been trying worked perfectly the first time.
GPRS usage monitor that works?
Can someone tell of any GPRS usage monitor programs that work on the Excalibur?
Never mind.
I found out that Efficasoft makes a special version for the DASh and some other phones here:
http://www.efficasoft.com/gprsmonitor_w.html
efficasoft
smartphone gprs traffic monitor
ver. 3.51w
I'vwe noticed that even when not having anything coming in, the counter slowly creeps up.
Never mind.
I was reading it wrong. I've only used 1.74Kb.
The other figure was the projected month usage at the current rate.
did anyone managed to get the today plugin working in other homescreens?
when I put it in my homescreen it is always on the very left position on the screen.
Well these are the settings provided by my service provider .. but i dont knw whr to appy this.....????
on my excalibur with wm5
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
just go to setting, connections, and there gprs, select new and follow instructions?
evow said:
just go to setting, connections, and there gprs, select new and follow instructions?
Click to expand...
Click to collapse
after doin this also the gprs is not workin.. is there anythin else i have to do ... to make it work.....
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
evow said:
uncheck autodetect setting in ie?
is there an E or so mentioned above in the screen....?
Click to expand...
Click to collapse
Sometime it appears n sometime it disappears....
wht should i select wap/work/securewap/internet????
i have the same thing that it appears, and leaves again,
bo worry
Normally you should check internet connection?
my settings with connections:
name : TELENET
connect to : INTERNET
accesoint : internet.be
all the other fields are blank.
settings ie:
uncheck autodetect settings
slect network: the internet
save ; and im connected
i guess that ther must be something wrong with : portalnmms
maybe it is portalnmms.com/or other...
yea a E is on my screen.....
Manual GPRS settings
Settings name Hutch_gprs
Home page http://www.hutchworld.co.in
Session Mode Permanent
Connection security Off
Data bearer GPRS
GPRS access point portalnmms
IP address 10.10.1.100
Authentification type Normal
Login type Automatic
User name <blank>
Password <blank>
and they have mentioned the access point.. also...and selected the internet as my option but still its not workin .... doin a master reset will help in this case...........

There must be a way around this!

Hey folks! I have an HTC Hermes running WM6 with wap connection (behind Proxy). I've been facing two problems with my connection every since I started using HTC products:
1) I cannot setup my Gmail account on outlook. I have tried every possible way, and I read so many threads but nothing seems to work.
2) Weather on HTC Homeplug doesn't work, even on the N2A patched one.
I hope those problems are solvable. I think it has something to do with my wap connection( I live in lebanon, using ALFA service, if any lebanese guys are reading this and have made those two things work, please post the settings/work around)
I appreciate any help and thanks in advance....
I'm not living in Lebanon but I have a Hermes device and I had no trouble at all setting up my gmail account, it even grabs the settings automatically. I don't know where your problem is stuck but it could be in the proxy settings.
sure everything can be solved. which ROM are you using and which Radio version?
I'm using Schap's 4.31 and radio 1.16.00.00
however i dont think it has anything to do with those things, i'm positive it's a matter of proxy settings
Are you sure the PROXY you defined is used for INTERNET?
most service providers use the PROXY for WAP only.
Call your service provider and ask them
I think you`ll get the answer from them.
I know it's for wap only, isn't there a way to make those things work over wap though?
xbiggyl said:
I know it's for wap only, isn't there a way to make those things work over wap though?
Click to expand...
Click to collapse
It depends if your service provider allows it.
here in Israel we have one provider that allows access to the WWW using the WAP protocol and another Provider that blocks all DATA other then their own WAP site.
I checked the connection setup app on my device and found that it has the settings for <Lebanon/Alfa>. I think if you use this application, you might not be in need to setup any proxy.
if nothing works for you, then -as elivne said- calling your customer service would be a good solution
PS be careful with your mobile bill!
EDIT: visiting the ALFA website takes ages for the page to load, but I found this one on their website http://www.alfa.com.lb/mobconf/EMAIL/SettingsDisplay.asp?m=4&code=4&mobile=PocketPC&model=IMateJAM
Click on Start, Programs, Inbox
Click on Accounts, New Account...
Enter e-mail address:
Click Next
Auto Configuration Click Skip
In User Information Enter:
Your name:
User Name:
Password:
Click on Save Password
Click on Next
Account Type: POP3
Name:
Click Next
In Server Information Enter:
E-mail account type: POP3
Incoming e-mail server: The client should obtain his incoming server address from his ISP. (For Example: pop.idm.net.lb)
Outgoing e-mail server: smtp.alfa.com.lb (if via Alfa GPRS)
farres said:
I checked the connection setup app on my device and found that it has the settings for <Lebanon/Alfa>. I think if you use this application, you might not be in need to setup any proxy.
if nothing works for you, then -as elivne said- calling your customer service would be a good solution
PS be careful with your mobile bill!
EDIT: visiting the ALFA website takes ages for the page to load, but I found this one on their website http://www.alfa.com.lb/mobconf/EMAIL/SettingsDisplay.asp?m=4&code=4&mobile=PocketPC&model=IMateJAM
Click on Start, Programs, Inbox
Click on Accounts, New Account...
Enter e-mail address:
Click Next
Auto Configuration Click Skip
In User Information Enter:
Your name:
User Name:
Password:
Click on Save Password
Click on Next
Account Type: POP3
Name:
Click Next
In Server Information Enter:
E-mail account type: POP3
Incoming e-mail server: The client should obtain his incoming server address from his ISP. (For Example: pop.idm.net.lb)
Outgoing e-mail server: smtp.alfa.com.lb (if via Alfa GPRS)
Click to expand...
Click to collapse
I'm sorry to say that it didn't work..By the way I've tried it before and I did try it today,unfortunately it didn't work!

Kavana ROM proxy settings: new-inet / new-corp ?

I asked this n another thread, but no joy.
I installed the latest Kavana ROM, works GREAT. Thanks for that.
But, some questions.
I'd like to understand how all the networks and proxy things work.
I understand how proxy servers work for the PC world, but I don't understand all the various connections and proxies on the smartphone.
I'm on T-mobile, and I used the connection wizard. But then MMS and SMS weren't working quite right, so I applied some other settings from some other posts and right now, it all (IE, SMS, MMS) seems to work.
But, I am not at all confident I could reproduce this if I had to flatten the device again. Is there something I can read to understand the relative significance of all the various named networks: "work" "TMobile MMS" "Tmobile Data" "WAP Network" "Secure WAP Network" and "The Internet" and also the various proxies that route to these various networks?
Do I really need all the connections - I have like 7 of them.
The new-inet:1118 proxy - what is that for?
That hostname, is it really meaningful?
I also have a new-corp:1159 proxy,
with a name of HTTP:{3F31657F... (etc etc guid)}
What is THAT thing for?
I'd feel better if I understood all these settings, when and why I need a proxy. etc etc . thanks for pointers.
Anyone know?
Anyone know the answer to this? anyone have any clues to offer me?
I'm also having trouble w/ the MMS after installing Ricky's ROM. Are you able to pull the MMS settings from your phone and share? Otherwise, does anyone else know all of the settings?
Cheeso2 said:
The new-inet:1118 proxy - what is that for?
That hostname, is it really meaningful?
I also have a new-corp:1159 proxy,
with a name of HTTP:{3F31657F... (etc etc guid)}
What is THAT thing for?
I'd feel better if I understood all these settings, when and why I need a proxy. etc etc . thanks for pointers.
Click to expand...
Click to collapse
These cryptic settings come from active sync. I see them if I allow my DASH to sync with my office Windows XP machine with networking enabled. and my office trys to use the network my Dash is on. Once these entries are created, I can not use my t-mo net connection (cheap version). But it is all fine, once I delete these unknown entries.
My MMS Settings
Here's what I did to get MMS to work, in and out.
I am using Kavana 1.33 ROM.
1. set up 2 connections:
Start...Settings....Connections....GPRS
Now, either add a New item, or edit an existing one.
Description: T-Mo Web or T-Mo Data or something else similarly descriptive
Connects to: The Internet
Access point: internet2.voicestream.com
Username: <blank>
Password: <blank>
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address: <blank>
Done
[the above gets you a connection to the Internet ]
Again, either add a New item, or edit an existing one.
Name: T-Mo WAP or T-Mo MMS or something descriptive
Connects To: WAP Network
Access Point: wap.voicestream.net
[everything else as above]
Done
[the above gets you a connection to the T-mobile WAP network]
Done
[you are in Settings...Connections, now.]
2. set up one proxy
Scroll to "Proxy"
[this is also reachable directly from home screen via: Start...Settings....Connections....Proxy]
New.... or Edit an existing (your preference)
Name: Tmo WAP->Internet
Connects from: Wap Network
Connects To: The Internet
Proxy: 216.155.165.50:8080
Type: HTTP
Username: <blank>
Password: <blank>
Done
[the above sets up a proxy connection for your SMS/MMS]
Done
[you are in Settings...Connections, now.]
3. Set up SMS preferences
Scroll to "SMS Service"
[this is also reachable directly from home screen via: Start...Settings....Connections....SMS Service]
SMS over: GPRS Preferred
Done
[your are now back in Settings...Connections]
Pess the red "call end" button.
[you are now back on the home screen]
4. Set up MMS on the device:
Start...Messaging
scroll to MMS
Menu...Settings...
Menu (again)
MMSC Settings
Menu...New or Menu....Edit (your pleasure).
[the settings for this MMSC thing should be:]
Name: whatever you like, I used "Picture Messaging"
MMSC URL: http://216.155.174.84/servlets/mms
WAP Gateway: 216.155.165.50
Port: 8080
Connect Via: WAP Network
Max. Sending Size: 300k (or whatever you prefer)
WAP version: WAP 2.0
Done
Done
Done
HOME
5. set up IE
Start...Internet Explorer
Menu...Tools...Options...Connections
Automatically Detect Settings - This works either way for me, checked or unchecked
Select network: The Internet.
Done
Done
----
All of the above allows me to send out SMS and MMS messages, and receive in such messages, as welll as surf the internet from IE.
I have the $19.99/month T-Mobile internet plan in the USA.
If you have the $5.99 T-zones plan, then I think your settings may be different.
Search elsewhere for that.
ActiveSync creates new-inet and new-corp proxies?
jhunkab said:
These cryptic settings come from active sync. I see them if I allow my DASH to sync with my office Windows XP machine with networking enabled. and my office trys to use the network my Dash is on. Once these entries are created, I can not use my t-mo net connection (cheap version). But it is all fine, once I delete these unknown entries.
Click to expand...
Click to collapse
Are you sure? Are you sure those things come from ActiveSync and are not just in the Kavana ROM? I use Windows Vista, and the Windows Mobile Device Center, which is the replacement for Activesync. I have never used WinXP and ActiveSync (on the PC) with this device, but I did have those weird entries. I don't see those odd proxy entries get recreated when I sync with Vista+WMDC.
I assuming that the odd proxy entries that reference "new-corp" and "new-inet", were just "in" the ROM by default. Or maybe they were set up when I ran the Internet Connection Wizard which is in the ROM. I don't know for sure. This is why I am asking you, ARE YOU SURE that those entries come from ActiveSync?
Do they return *every time* you sync?
In any case, lacking any real response from the board, I removed the proxy entries from my device, and for me at least, everything still works - SMS, MMS, Internet, etc.
I hate the fact that this still feels so mysterious.
-Cheeso
Damn. I put in all of these settings exactly as shown and still get an "Error Synchronizing" message when I try and send/receive MMS messages. Does anyone have any ideas? I'm on T-Mobile, $20 plan w/ Ricky's 6.1.

How do I get mms and internet working on S620 on UK 02? (yes I did search)

Okay I know some people will likely flame me, and yes I have searched the forums and google and spoken to 02 who say they don`t support the S620 (they said it was an XCA100).
I know the actual settings but none of the instructions I have read match what is on my S620, it has the latest Kavana 6.1 ROM and an 02 (UK) pay as you go sim card in.
I have tried going to the connections setting and adding the details manually but then that is where the instructions differ. So having spent a week searching I will now take the flames, if any, and hopefully some one will talk me through how to set up mms and internet.
this is the settings i use? for payg.
O2 GPRS settings (WAP):
Homepage: http://wap.o2.co.uk/
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : payandgo
Password: password
Session type: Continuous / permanent
Authentication: Normal
Security: Off
Port number: 8080
in GPRS
hit new
input O2
screen connects to input
the internet
access point payandgo.02.co.uk
user name payandgo
passward passward
authentication type none
IP Address 193.113.200.195
done done done done
run internet explorer and you should be on line
cant help you with the other psart as iv not done it myself sorry
hope it works for you it took me a few days to get it going.
mms settings you need to have this turned on by phoning O2
but here are settings
The o2 MMS settings can be sent direct to your mobile. Go to www.o2.co.uk/services/ota4/select. Alternatively, the settings are: this dont work with the s620 (as you know) thay cant be sent
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
Port number: 8080 or 9201
URL address: http://mmsc.mms.o2.co.uk:8002
and this is a good place to look up all othe setting for other networks
http://www.filesaveas.com/gprs.html
settings walkthrough
mentalmummy said:
Okay I know some people will likely flame me, and yes I have searched the forums and google and spoken to 02 who say they don`t support the S620 (they said it was an XCA100).
I know the actual settings but none of the instructions I have read match what is on my S620, it has the latest Kavana 6.1 ROM and an 02 (UK) pay as you go sim card in.
I have tried going to the connections setting and adding the details manually but then that is where the instructions differ. So having spent a week searching I will now take the flames, if any, and hopefully some one will talk me through how to set up mms and internet.
Click to expand...
Click to collapse
Hello i had the same problem here is a link with a walkthrough for setting it up the settings are for asda mobile so just substitue o2 for asda. the thread was started when i wanted to set up my vox, i now have an htc s620 and have just set mine up useing the old vox thread.
Hope it helps
http://forum.xda-developers.com/showthread.php?t=448359&highlight=asda
Nope still can`t get anywhere on net or mms, internet says the remote host ended the connection and mms appears to send but doesn`t do anything and wont receive at all
mentalmummy said:
Nope still can`t get anywhere on net or mms, internet says the remote host ended the connection and mms appears to send but doesn`t do anything and wont receive at all
Click to expand...
Click to collapse
Have you spelt "password" correctly, not "passward" as above, it seems to work fine on my S620 otherwise.

mms recieve problems wm 6.1

I have a htc s621 originally came with wm 6.0 I upgraded to wm 6.1 with Kavana’s 6.1 ROM - Remade by Ricky. after the up grade had probs with getting on the internet and sending and recieving mms spent 4 hours on the phone with immix tech got the internet and sending mms fixed and i can recieve mms but it says i have to download the content but when i hit the button to download it does not download how do i fix this prob thank you for any help anyone can give me
Use the search function buddy. If you made a bit more research when flashing, you would have seen also guides to fix those issues. There is like 48672 threads a day for these things.... I mean, why can't people follow the rules. I did, why can't others.
If I could get a quarter for every MMS thread posted...
i have read throught so many threads and could not find the answer that is y i posted a thread im sorry but i would like to find the answer
I searched a whole bunch and nothing i found worked. i had to piece things together to make it work...
let me know if you use t-mobile and i'll let you know what all my setting are so you can mirror them.
Use Google people. In these cases its your best friend. First of all, in this very site I found lots of T-Mobile .cabs for MMS issues and what not. Second of all, you need to go to Connection Setup and create an MMS Connection. I don't recall the numbers and stuff but it is very easy to find anywhere here on Google.
It's not that simple for everyone man...
I had a hard time getting it to work. I couldnt just do what the stuff said.
I am sorry dude, I just think that if a noob like me could have done it, anyone can. And some people really do not even try the search option. Did it work?
I am not saying it is really hard to do. but for myself, and obviously at least one other person, it doesnt work with the standard settings. i did the same as he did; searched and tried over and over, then called t-mobile, still nothing.
Although my situation may have been a little different because i wanted to have my MMS, my email, SMS, and the $5.99 internet hack. i finally messed with it enough to where i started to understand how it worked, then came up with a solution. i would post it now but I'm on my phone in class.
I'm not trying to moderate, but please dont jump in a post and be assholes to people who said they searched, tried, and called their carrier with no positive results.
We are not being assholes, but these issues have been dealt before many times, and there are tons of people who open at least 4 to 5 threads about them weekly. A bit of search here and on Google would answer pretty much everyone's problems. Its not like your phone is different. T-Mobile, don't know who you spoke to, but they should have simply told you to look at their web Configurator page which is this... http://tmobileuspublic.wdsglobal.com/phonefirst and you can just click in the info and get... this.. http://tmobileuspublic.wdsglobal.co...ufacturerId=9&mobileNumber=&incomingServerId=
So, don't know about you, but I can assure you many don't even bother looking up anything and they say they do... already on Google man...
http://www.google.com/search?hl=en&q=t-mobile+mms+setting&btnG=Google+Search&aq=f&oq=
I rest my case. Hopefully you solved your problems.
Skip down if you just want the informative part of this post and not my *****ing.
I don't think he should have started a new thread on this subject, please don't think I support or encourage duplicate threads, they are actually a pain in the ass to sift through. He should have tacked onto another like you did when you were having the problems. I don't know about him, but I guess some people not used to how forums work may not realize that when you post in a thread it goes to the very top. Regardless, unless a moderator decides to delete the thread, I personally don't think we need a bunch of people taking the time to tell him to search, but not go that little extra step and link him to a thread. Also, try typing in "MMS" into the forum search, it's interesting. I didn't mean to come off as a jerk or anything, I just get a little upset when things like this happen on forums. Maybe I need to talk to people face-to-face rather than using an electronic medium all the time.
Now! For the goods!
As far as why the settings I got to solve this did not work on my phone, I don't know. It's still weird to me because I have T-Mobile just like them and theirs is fine.
Every time I tried those settings, whether I found them on here, T-Mobile, or elsewhere, I could receive only 1 MMS message, send as many as I wanted, but receive no more.
I started from scratch several times too, just to make sure I wasn't missing something, or had something I shouldn't. Still, it wasn't working.
I eventually came up with a solution on my own. It may have something extra that may not be needed, but it works and I don't want to mess with it!
Just in case it matters; I am using Kavana 080408 remade by Ricky. V24 Vanilla.
Here are the settings I currently have:
(This is assuming you know how to get to where you edit all of these values.)
The Items in bold are different from the items in that category.
Under GRPS Settings (not "GRPS"):
Please select your GRPS authentication method: PAP authentication
Disconnect GRPS When Dropped: Hold Connection
[x] GRPS Auto Attach
[x] GRPS Auto Detach
What GRPS I have:
Name: T-Mobile Data
Connects to: T-Mobile Data
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile Data 2
Connects to: WAP Network
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile Data 3
Connects to: Work
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile MMS
Connects to: WAP Network
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: 216.155.165.50
Name: T-Mobile WModem Link
Connects to: T-Mobile MMS
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Proxy Settings:
Name: T-Mobile WAP
Connects from: WAP Network
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
This next one is identical to the first, I guess I don't need it.
Name: T-Zones proxy
Connects from: WAP Network
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
Name: T-Zones proxy 2
Connects from: Work
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
Assuming you did search around and know how to change the MMSC settings, those should be the same:
Name: T-Mobile MMS
MMSC URL: http://216.155.174.84/servlets/mms
WAP gateway:216.155.165.50
Port: 8080
Connect via: WAP Network
Max. sending size: 300k
WAP version: WAP 2.0
Also, when you are in the MMS>Options>Account Settings part, I read the first checked entry which says "Automatic download in home & roaming network." When I reread it, it made me think that it wont automatically download in the home network, not just when roaming; but I could be wrong.
Well, I hopes that helped you out! Let me know if that doesn't work. Those are my only settings, not just the ones I made. I deleted the ones T-Mobile puts in when you use the Connection Wizard thing.
Also, again, sorry if I was being a ****.
ok captian first i joined this site to learn how to do this stuff on my fone and the things u posted here was not of any help anyway second i am not on t-mobile service so noone on this site posted the direct answer for me i am on immix service and after hours of looking throught my registery i found out that immix was telling me to put the wronge port into my mms settings i fixed it myself thanks for no help but there r some very helpful ppl on this site the dont want to put ppl down for not being able to find the answers themselves
EternalSoil said:
Skip down if you just want the informative part of this post and not my *****ing.
I don't think he should have started a new thread on this subject, please don't think I support or encourage duplicate threads, they are actually a pain in the ass to sift through. He should have tacked onto another like you did when you were having the problems. I don't know about him, but I guess some people not used to how forums work may not realize that when you post in a thread it goes to the very top. Regardless, unless a moderator decides to delete the thread, I personally don't think we need a bunch of people taking the time to tell him to search, but not go that little extra step and link him to a thread. Also, try typing in "MMS" into the forum search, it's interesting. I didn't mean to come off as a jerk or anything, I just get a little upset when things like this happen on forums. Maybe I need to talk to people face-to-face rather than using an electronic medium all the time.
Now! For the goods!
As far as why the settings I got to solve this did not work on my phone, I don't know. It's still weird to me because I have T-Mobile just like them and theirs is fine.
Every time I tried those settings, whether I found them on here, T-Mobile, or elsewhere, I could receive only 1 MMS message, send as many as I wanted, but receive no more.
I started from scratch several times too, just to make sure I wasn't missing something, or had something I shouldn't. Still, it wasn't working.
I eventually came up with a solution on my own. It may have something extra that may not be needed, but it works and I don't want to mess with it!
Just in case it matters; I am using Kavana 080408 remade by Ricky. V24 Vanilla.
Here are the settings I currently have:
(This is assuming you know how to get to where you edit all of these values.)
The Items in bold are different from the items in that category.
Under GRPS Settings (not "GRPS"):
Please select your GRPS authentication method: PAP authentication
Disconnect GRPS When Dropped: Hold Connection
[x] GRPS Auto Attach
[x] GRPS Auto Detach
What GRPS I have:
Name: T-Mobile Data
Connects to: T-Mobile Data
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile Data 2
Connects to: WAP Network
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile Data 3
Connects to: Work
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Name: T-Mobile MMS
Connects to: WAP Network
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address: 216.155.165.50
Name: T-Mobile WModem Link
Connects to: T-Mobile MMS
Access Point: wap.voicestream.com
Username:
Password:
Authentication Type: None
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP address:
Proxy Settings:
Name: T-Mobile WAP
Connects from: WAP Network
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
This next one is identical to the first, I guess I don't need it.
Name: T-Zones proxy
Connects from: WAP Network
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
Name: T-Zones proxy 2
Connects from: Work
Connects to: The Internet
Proxy (nameort): 216.155.165.50:8080
Type: HTTP
User name:
Password:
Assuming you did search around and know how to change the MMSC settings, those should be the same:
Name: T-Mobile MMS
MMSC URL: http://216.155.174.84/servlets/mms
WAP gateway:216.155.165.50
Port: 8080
Connect via: WAP Network
Max. sending size: 300k
WAP version: WAP 2.0
Also, when you are in the MMS>Options>Account Settings part, I read the first checked entry which says "Automatic download in home & roaming network." When I reread it, it made me think that it wont automatically download in the home network, not just when roaming; but I could be wrong.
Well, I hopes that helped you out! Let me know if that doesn't work. Those are my only settings, not just the ones I made. I deleted the ones T-Mobile puts in when you use the Connection Wizard thing.
Also, again, sorry if I was being a ****.
Click to expand...
Click to collapse
If you look up MMS here you won't get anything. I know, its weird.
I suggest you use Google first. They usually will redirect you to XDA threads anyway.
The 8080 trick, as far as I know, doesn't work anymore. T-Mobile found out a while back and closed it. The only thing you can do now is ask them for the $5.99 T-Zones but you should call from a non PDA phone (they know by the IMEI when you call which phone you have. Its insane, they got like a huge database of all IMEI's or something). But if they find out, they will switch you to the 19.99 or 34.99 deal. So be careful.
Well, it seems you managed to change your GPRS (and not GRPS) settings as I suggested and it seems to work, so good luck.
paraven31 said:
ok captian first i joined this site to learn how to do this stuff on my fone and the things u posted here was not of any help anyway second i am not on t-mobile service so noone on this site posted the direct answer for me i am on immix service and after hours of looking throught my registery i found out that immix was telling me to put the wronge port into my mms settings i fixed it myself thanks for no help but there r some very helpful ppl on this site the dont want to put ppl down for not being able to find the answers themselves
Click to expand...
Click to collapse
Apart from the appaling writing skills, I suggest you calm down and buy some maturity from people like EternalSoil.
The things I posted here are the same posted by other people much more knowledgeable (even though for something like this you don't need to know how to cook roms) than me. Also, I don't know which carrier you have since you never told us 'til now, but the principles are the same. If you have AT&T or vodafone or immix, the settings are the same, the only thing that you will have to look for is "MMS Setting for <your carrier>". Its this not using the brain at full potential that I don't appreciate, not people asking after true searching.
I went on Google just now, typed in immix settings, saw a Nokia 6200 settings doc... I said, let's try it and... voila'... Sure, you will have to use your brain a bit, but the info you need is all right here. 5 minutes buddy.
NOKIA​ 3200, 6010 & 6200​
Note:When programming a phone for data, you may need to type a “.” or “:” between alpha or numeric characters. Use either the number 1 key for these symbols, the *#, or *+ key on the keypad. DO NOT enter any kind of User Name or Password during the setup process. They are not required for accessing the internet or MMS.
STEP 1: Establish Internet/GPRS Connection
Menu
Scroll ¯ to Services Menu & SELECT
Scroll ¯ to Settings & SELECT
Select Connection Settings
Scroll ¯ to Edit active service settings & SELECT
Select Settings’ name
Clear out any default name and type in: I-MIX & OK
Scroll ¯ to Homepage & SELECT
http:// will appear on the screen
Type in the following address: http://wap-home.immix.com & OK
Scroll ¯ to Data Bearer & SELECT
Scroll ¯ to GPRS & SELECT
Scroll ¯ to Bearer Settings & SELECT
GPRS access point will appear & SELECT
Type in: walled.immix.com & OK
Scroll ¯ to IP Address & Select
Type in 209.4.229.78 & OK
Hit BACK or EXIT until you are back to the Main Menu
TO ACCESS INTERNET: Menu; Scroll ¯ to “Services” Menu & Select; Select I-MIX and you will begin to connect to establish GPRS/Internet connection
STEP 2: Establish MMS (Multimedia Message Service)
Menu
Messages Menu & SELECT
Scroll ¯ to Message Settings & SELECT
Scroll ¯ to Multimedia Msgs & SELECT
Scroll ¯ to Connection Settings & SELECT
Scroll ¯ to Edit active multimedia settings & SELECT
Select Settings’ name
Clear out any default name & type in: MMS & OK
Scroll ¯ to Homepage & SELECT
http:// will appear on the screen
Type in the following address: http://mms.immix.csky.us:6672/ & OK
Scroll ¯ to Data bearer & SELECT
GPRS appears & SELECT
Scroll ¯ to Bearer settings & SELECT
GPRS access point & SELECT
Type in: walled.immix.com & OK
Scroll ¯ to IP Address & SELECT
Type in: 209.4.229.78 & OK
Hit BACK or EXIT until you are back to the Main Menu
TO ACCESS MMS: Menu; Scroll ¯ to “Message” Menu & Select; Scroll ¯ to Multimedia msgs. & Select. Select Create Message and begin to process whatever type of message is going to be sent.
The forum search will only search on 4 letters or more "just to cleat that up"
You can always use the google assisted search as things like mms settings wont differ from phone to phone.
OP: Glad you got it sorted.
Good to know you got it sorted out OP.
I have had the $5.99 plan for almost 2 years now. The 8080 thing still works I assume, cause all my stuff works just fine.
As far as search goes; it's good to know the forum search will only do 4+ letters. I don't know why I prefer the forums search, I just do =/
If you have the 5.99 thing, THAT's why it works. The 8080 port was a glitch of T-Mobile for those who didn't even have the T-Zones 5.99.
same here..
Thanks for the write up EternalSoil...I am in the same boat as you were. Tried every setting under the roof, MMS would work 1-2 times OK, then I would never receive any more (but could send all the time). I too am using the $5.99 plan. Internet works just fine, it's just the dang MMS. If I reboot, occasionally I will get 1 or so to come through but that's it. I have tried about every ROM out there (just flashed to NRG 1.4 last night) to see if that would make a difference.
Prior to entering in all your settings, did you run the Connection Setup program, then delete all the entries?
Can you outline your exact settings in the MMSC preferences? I just want to try and match this up identically w/ someone else to see if I can get this to work. If you have any other thoughts please let me know.
Thanks!
Yes, I did run the connection manager. It added some proxies, or GRPS settings or something. I deleted everything that was in any of those, then entered the stuff I posted before.
My MMSC Settings:
Name: T-Mobile MMS
MMSC URL: http://216.155.174.84/servlets/mms
WAP gateway: 216.155.165.50
Port: 8080
Connect via: WAP Network
Max. sending size: 300K
WAP version: WAP 2.0
Prefrences (these are what I have checked):
Automatic download in home & roaming network
Save sent Messages
Allow delivery report
Disconnect network connection after MMS
No. of attempts: 3
Photo resolution: SXGA (1280x1024)
Hope that works for you man, let me know if you need more info.
Thanks for the settings...matched them exactly and still having issues. Do you mind telling me what you have on the Settings > Connections > Menu button > Advanced page?
Thanks man, hope to get this soon!
From another thread I posted in too:
Mine is doing the same thing..Tmobile..reflashed last night to Kavana, manually put in all settings (mms / proxy). Phone sends MMS fine but will not receive them. Phone lights up when receiving MMS but never comes through. I will manually send/receive, and occasionally I see the envelope flash up with the down arrow, but it usually does nothing after that point...
----
I am also getting an 'Info' alert - Unable to receive your message(s). Your message(s) notification(s) will remain in your Inbox. - Press OK.
---

Categories

Resources