My prophet stopped picking the wifi signals.Even I create the network and force it to connect it shows up as unavailable. I think My antenna is damaged and looking for a replacement part but couldn't find on the net. Any ideas ? thanx in advance.
It can be that RadioModule of OMAP-processor is damaged.
Did U played with extreme overclocking?
Nope i didn't , i actually dont overclock just leave it at 195mhz...and when i enable the wifi i can see the mac adress of teh device...but i cant see it when wifi is off...so it means to me that its not a hardware problem...and thanx to chopin who checked my files (gsmdata) and told me that they were normal...so it could only be the wifi antenna i think...any more ideas thanx in advance.
some one know a soft cracking wifi on the qtek?
Related
Hello!
I believe I saw a thread that addressed this problem a few weeks ago, but I can't seem to find it now...
If I forget to turn WiFi on when I start IE, my Dash automatically starts to browse using an EDGE or GPRS connection. Is there anyway to disable the unit from using EDGE or GPRS for internet browsing? Or at least make it stop going to EDGE if WiFi is off? I don't have a data plan and don't want to be charged for access.
Thanks!
i also have the same problem and have had to resort to altering the gprs settings so that it cant connect. This is obviously not ideal as I would like to have it working in an emergency etc.
Thanks for any help!!
huemedia said:
i also have the same problem and have had to resort to altering the gprs settings so that it cant connect. This is obviously not ideal as I would like to have it working in an emergency etc.
Thanks for any help!!
Click to expand...
Click to collapse
How did you do this? I have skype mobile installed, but it has a setting that is easy to figure out. Basically i only want to run IE over Wifi.
I'd be interested in a solution for this too. I've been deleting the GPRS settings and only entering them when I need to use it, which is less than once a month.
me too...
I'm in the same situation... is there any software to disable GPRS .. EDGE.. when the WIFI is off??....
Have had several of the XDA family from the iis, exec,mini/s etc. Just got a nice Orbit from O2 and have spent literally hours attempting to get the damned thing to connect to my wireless router.
Never had an issue with the other XDA's, just enable SSID on the router, switch on the device wifi, when it sees the router, connect and enter the wep key. Hey presto, it works. Not this damned Orbit...
I do all the correct stuff, but what happens is that the key input notification goes, the wifi icon on the top line cycles for a few times and then just goes to the 'mast' icon. If you look at the available networks page, it shows the network as Unavailable!
Click on connect, it goes into a Connecting state, and then goes Unavailable again.
I have tried without any WEP security active (totally open netwok) and it does exactly the same. No setting on the 'performance' screen makes any difference.
Has anyone else experienced anything like this? My home network is 802.3b (not g) ... I haven't tried another network yet as I know my router is working fine (my mini/s still connects OK). Is it perhaps a faulty Orbit?
Any suggestions welcomed.
Maybe the problem is that it doesnt have wifi? Or at least the MDA Compact 3 doesnt anyway
The Orbit has G Wi-Fi and it certainly sounds faulty. Have been able to try connecting to any other networks?
WiFi solution
I had exactly that problem and I solved it by changing the channel on the wifi router. Some channels seem outside the Orbits reception range. Change it a few times until you hit the jackpot.
Did you change the energy options (from balanced to high performance)?
Without this setting my wifi doesn´t work at all...
Greetz
Michael
micstar said:
Did you change the energy options (from balanced to high performance)?
Without this setting my wifi doesn´t work at all...
Greetz
Michael
Click to expand...
Click to collapse
Yep - done that. In fact, I have tried all 11 channels on my router with WEP both on and off. Still no-go.
What occasionally happens is that it will 'see' my wifi SSID (and that of my neighbours), but after a short while both networks go into an Unavailable state on the 'available networks' screen.
I have made a connection TWICE (both with WEP 128bit security, and each time on Ch11) - showing very low signal strength each time. The connection will survive for no more than 30 seconds and then drop out, never to reconnect!
It's doing my damned head in. Never had an issue with any of my previous wifi devices - I can only assume that there is a fault with the wifi radio section... its only 4 days old so will need to get an exchange from O2 then...
It was definitely a faulty Orbit!
Issue resolved.
Got O2 to exchange my Orbit for a new replacement.
WiFi working 100% now, and all as expected. I did nothing different in the setup of the new one - my only conclusion is that it was most definitely faulty.
So, for some use if anyone has the same kind of problem (and bothers to use the search facility), if your WiFi is 'deaf' and cannot see your router or won't stay connected, then suspect a faulty device.
Sigh - updated to O2's WM6 rom and now the damned wifi is stuffed again.
Anyone got any suggestions? This thing is driving me nuts. Is there an updated radio firmware that fixes the poor wifi or is it a hardware issue?
I had this little snag (OR BIG ONE) when Purchasing a Belkin 54g Wireless Router, slightly different scenario since you're Router hasnt changed, What I proceeded to do was delete all the detected wifi network even my own and try wifi enumeration again, This solved the particular problem that I had,
whew!
My heart almost stopped when I read trap's 'faulty hardware' post!
I have EXACTLY the same problem... and EXACTLY the same hardware (belkin54g, wm6 on an O2 Exec).
The router was a freebee, so I am going to just go grab a old Trendnet and give it a go.
...keep you posted... but I think a re-flash is probably going to have to happen. Anyone know any stable wm6 roms?
No luck. The Trend does the same thing.....
Hunting around on the forums here I found this:
http://forum.xda-developers.com/showthread.php?t=251969
Sounds like we have an wm6 that is incompatible to with 'g' s
I am having the same issue - what was once working is now not. I have a Belkin Wireless router, which my XDA has had no issues talking with ... however now, I just get 'Unavailable' on the XDA when I try and connect! Madness!
OK - after days of pulling my hair out, it has suddenly started working. To be fair I think that it has little to do with the XDA and more to do with the Belkin Router. I changed numerous things and suddenly it started working again, sorry I cannot offer any more help!
Hi Guys
We have recently had BT open up a Wifi ripoff spot. My Desire seems to like it and is willing to connect to it rather than the 3g network. The wifi spots are unsecured and direct you to the Payment page.
Is there a way to ban this wifi spot so that it will still auto connect to all my other wifi spots that I added myself?
Thanks in advance
Have you taken it off of your remembered hotspots list? If not go to setting, wireless and networks, wireless or WiFi then it should give you a list of remembered hotspots. Click on a hotbot and the option to forget should pop up
Sent from my HTC Desire using XDA App
hi mate i have seen this option but did assume it would just find it again anyway. Does the network go on some sort of hidden blacklist once you tell it to forget.
oh I am going to try it anyway btw and thanks very much for the reply.
If you connect to an open network, it will always try to reconnect to it again once you are in range. So, you need to "forget" the network - it isn't blacklisted and you can still connect to it again if you wish, but it won't try to auto-connect all the while it is "forgotten".
Regards,
Dave
Sorry for opening up this old thread, but I have a issue in the same line, altho fundamentaly diferent:
I have a number of accessible networks within my range. I have a small issue with the auto connect. Is it possible to have the phone remember the network settings for networks, but NOT auto-connect to them?
Or make an ordered list with most preferred AP on top? When I'm in my garage, signal strength make the phone conect to my neighbor (I have his network in my list too, as I often visit and then uses his AP), but want my own LAN and shared folders accessible...
Not sure you guys get my meaning. It wasn't very well written, but I hope you are able to help?
when i turn the wifi on it saids turning wifi on then error so restart phone and still dont work i tryed a diffrent froyo and still dont work and tryd to reinstall it any idea on how to fix it thank you
What Kernel are you using, and did you apply the wifi patch if you're using 2.6.25 kernel.
If you're using 2.6.32, did you apply the androidupdate file associated with the kernel?
Need more information...
ok i got wifi to work but when i get clsoe to wifi box i only get one bar how do i fix this
noobsmacker said:
ok i got wifi to work but when i get clsoe to wifi box i only get one bar how do i fix this
Click to expand...
Click to collapse
Buy a wireless router and stop stealing your neighbour's bandwitch
Jokes aside, how far away are you from the wifi router?
I usually get two bars when I'm close to my router and by close I mean from 5cm to 3 meters. I rarely get the full signal...it probably could be improved by kernel/modules but the downside would be shorter battery life.
There are numerous reasons why you only have 1 bar for wifi. It could be interference with other wifi routers in the area, using a crowded channel, bad antenna.
But I doubt it's the wifi on the phone, unless the antenna for it is damaged...
Experiment, try different channels on your router to see if you get a stronger signal, move the router around the room, and check the antennas as well.
Hope this helps.
its not my thing it worked fine on fianl dark i got all the bars i went to froyo because i dont get the close error anymore and froyo is faster and dont lag when do you thing they will fix thr problem
Hello together!
I have a problem with my Desire
I'm using CM7 since months without troubles.
But from one night to the other my wlan signal is extremly low, i have one bar of signal strength directly at the hotspot (no problems with other mobile phones or notebooks etc)
After that i tried many things:
newest radio, newest CM7, a new middle case ... without success.
The GPS signal is good ...
I think the Bluetooth signal is also not so good, but i don't have a reference here.
So i hope anybody can help me here!
Thanks pmneo
but does your wifi work ok , i mean are u able to surf on ur phone with wifi ??
or do u have to sit near the hotspot for that ?
i can surf about 3-5 meters around the hotspot.
Before i got that problem i was able to surf everywhere in the house ...
Do you also have the problem with other hotspots?
If not it's a hotspot issue (change wifi channel or something), if so I would advice to test it with a standard rom to be sure.
If it's still bad with the standard rom after that it's probably the hardware of your phone.
Try with another hotspot. If problem remains, do a backup and hard reset, or you can even try a new rom.
I tried the hotspot @ work -> same problem
I tried some other roms -> same problem
I think the antenna is the problem ... does anybody nows where the antenna is located?
Thanks pmneo