i updated my dppod c 720w with offical htc wm6
after i installed bb connect 6 but it does not work
the pin no. comes
imei is there
but in ip it asks not connected
will this work in offcial wm6
uhno
Junior Member Join Date: Nov 2007
Posts: 6
Make sure to uninstall BB before this. then reboot phone then:
Open a reg editor for your phone and go to
hklm>system>versions> for version change to .0.4.2
reboot phone
Now install BB software and it should work.
I didn't invent this but I have used it and it works.
plz help............
truefriend said:
i updated my dppod c 720w with offical htc wm6
after i installed bb connect 6 but it does not work
the pin no. comes
imei is there
but in ip it asks not connected
will this work in offcial wm6
uhno
Junior Member Join Date: Nov 2007
Posts: 6
Make sure to uninstall BB before this. then reboot phone then:
Open a reg editor for your phone and go to
hklm>system>versions> for version change to .0.4.2
reboot phone
Now install BB software and it should work.
I didn't invent this but I have used it and it works.
plz help............
Click to expand...
Click to collapse
well y dont u try it and tell us?
Related
Well here it is . I have upgraded my qtek with http://www.qtek.nu/files/RUU172752WWE.zip from1.66 to 1.72. I did not hard reset the device before the upgrade so I had some problems during upgrade bit now all is ok. If anyone wants to upgrade also please find the solution for the country ID problem that mey occur. http://forum.xda-developers.com/viewtopic.php?t=12100 I DID not have that problem but you might. So before the upgrade please inform yourself about the problems that you may face.
Langurage ID error 121 during upgrade
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Re: Langurage ID error 121 during upgrade
mghinc said:
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Click to expand...
Click to collapse
You need to alter the ROM headers. See my post here for details on how to do it and also on how to avoid future problems.
I get the error not a valid win32 app when opening himagetda
I cant open himagetdevicedata.exe because i get the error not a valid win32 app when opening himagetdata.exe Also, when I upack ruu166150wwe I cant find the directory with the subdirectory containing the files himaclearjumpcode etc.
Thanks again in advance
I got to the Himaclearjumpcode using winrar thanks now
I just need to load himagetdevicedata.exe to load onto my qtek 2020
rom 1.66.02 FRA
date of rom 02/03/04
radio 1.10.00
de proto 1337.18
de extrom 1.66.219
My Qtek had the higher rom on it when i bought it but I was todl I needed to downgrade the rom to make it work in English. I have not been able to get it to work and I wonder do I need to upgrade the French version before changing to English. I just want it to work in English.
Thanks in advance
I forgot to mention that I am using Guest with my USB Active
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Re: I forgot to mention that I am using Guest with my USB Ac
mghinc said:
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Click to expand...
Click to collapse
You need to execute HimaGetDeviceData.exe on the device directly by tapping on it. Then copy the DeviceData.txt file it produces back onto your PC and view it with Notepad on your PC.
I have encountered an problem with bluetooth. I am trying to conect to gprs using Qtek 2020 with Nokia 6600 and P900. Before upgrade it went smoothly now not. So I am conecting to gprs via 6600 or P900 and it is not working
I try to execute the himagetdevice data by tapping on it
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Re: I try to execute the himagetdevice data by tapping on it
mghinc said:
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Click to expand...
Click to collapse
Please follow the instructions in my post here. Most of what you have been asking is covered in there.
To answer your questions anyway, when you run HimaGetDeviceData on your device there is no visual indication that anything has happened, but a file called DeviceData.txt will have been placed in the Windows folder of the device. No other files should be transferred to your device, as the upgrade process itself is run from the PC.
Simple fact (stated any times in this forum):I want to upgrade to windows 2005.
But boy! boy!
I am amiss with lenght and depth of information available in this forum, GREAT GUYS!
But finally turned out for me to be damn squib.
After dedicating my time and mind for 1 week, I really dont know weather this length and depth would get me somewhere.
So even though many times stated, I request again:
"SOMEBODY UPGRADE MY I-MATE 2003 TO I-MATE WINDOWS 2005"
AND PLEASE PROVIDE ME COMPLETE LINKS & DOWNLOADS CONSIDERING ME AS NOVICE!
My current specifications are:
i-Mate Pocket PC running windows mobile 2003
ROM Version: 1.72.00WWE
ROM Date: 03/15/2004
Radio version: 1.14.00
Protocol version: 1337.24
Ext ROM version: 1.72.126
Model No: PH10B
Regards,
?
:!: :!: :!:
Any reply, u genius!
Regards,
WM 2005n instaal
Hi; Here is how u first download de wm2005:
ftp://ftp.xda-developers.com/
or
ftp://ftp.xda-developers.com/Windows_Mobile_2005_HTC_Himalaya_1.50f/
then u can open these files with ER2003EDIT to manage the operator or country code en then u are finished to install !!!! below is the link to download ER2003 edit.
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.msi
Follow for full instruction this link:
http://forum.xda-developers.com/vie...ays=0&postorder=asc&highlight=wm+2005&start=0
Re: WM 2005n instaal
Mahmood said:
Hi; Here is how u first download de wm2005:
ftp://ftp.xda-developers.com/
or
ftp://ftp.xda-developers.com/Windows_Mobile_2005_HTC_Himalaya_1.50f/
then u can open these files with ER2003EDIT to manage the operator or country code en then u are finished to install !!!! below is the link to download ER2003 edit.
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.msi
Follow for full instruction this link:
http://forum.xda-developers.com/vie...ays=0&postorder=asc&highlight=wm+2005&start=0
Click to expand...
Click to collapse
I appreciate that!
Tell me when I open the above two links it gives me pop up window like: "503, Permission denied"!!!
Last link did worked for ER 2003
AND I LOGGED IN AS REGISTERED USER
Regards,
530 Permission Denied
[email protected], we can no longer access FTP
Somebody (could be admin or some selfish user) changed access settings to the FTP server. The last time I was able to login was about 4hours ago. I noticed that one of the 2005 folder (Himalaya2005 or Magneto) had its contents erased!
I do hope the admin would do something about this. But if it is the admin that blocked FTP, you can't blame them for doing so. Buzz about the Magneto have M!cr0s0ft on alert! Posters have received emails telling them to remove their posts.
Anyway, you better download Magneto somewhere else.
Goodluck to you.
If you want Information and support, please go here:
forum.xda-developers.com/showthread.php?t=283594
Look in the first Posting of this thread.
Look in the first post of this thread.
Look forward to seeing the new release, and keen to see if the 'phone' issues some of us are experiencing are fixed / not there.
Thanks Ivan
Re: AKU3.2 Rom for Universal
Lt.Cmdr.Ivan said:
Bugs2 known WIFI)
WIFI error1 (1 user reported it)
Universal goes to standby mode with Wi-Fi turned on, then I switch the device on, and it starts trying to register in Wi-Fi net forever (shows "tower" but without circle and rays)
WIFI error2 (1 user reported it)
Sometimes when I close Comm Manager device draws only upper part of screen and hangs, but if you wait for about half minute, it returns to life
Click to expand...
Click to collapse
I have this errors too...
Can i fix this or wait for next beta?
New Beta 8
Hi Ivan
I see a Beta8 with today's date on it, is that the new ROM????
No its just the beta8 repacked and reuploaded, because the rar on the ftp wasn't accurately packed.
...just to be in the thread.
:wink:
for info:
at the under side of the page is a link, click to warch or stop watching this thread.... :wink:
Save contact to SIM
I'm using rc1.
Contacts/tapping any contact/Menu/Save to SIM. The last item namely "Save to SIM" is not available (grey color, not black). Looks it's necessary to change a value somewhere in registry, but I did not manage to find what and where.
Does some1 face such problem? Or there is a solution the problem? Does this bug exists in beta8?
Thx in advance
[edit]
yes, "Save to SIM" is active and works.
hi Ivan
it will hang up when synchronizing with pc some times,and will show cannot get IP from server.I use beta 8.
We want the new rom! We want the new rom !
geovass said:
We want the new rom! We want the new rom !
Click to expand...
Click to collapse
YES, YES, YES !!
Cheers
hrb
2s to universal
Hi Ivan,
I back with you! Also upgraded from 2s to universal. Will try beta 8 on weekend. Anything to watch out for as I do also use the unit for live work...
Regards,
Simon
Hi! I used the beta 6 with pleasure ;-) But now i switched back to the qtek rom - i need a german ROM. I hope ther will be a german release.
Greetings Flo
did anybody try the *ARM*CAB? (BTP). I've downloaded it, the BT manager has changed but when I search for the Universal's services on my notebook, I get only the same 3 services az before...
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
alexei said:
I tried to flash de beta8 but i get country ID error 120... i read the readme file and it says:
Q14: I get “error 120: Country id error”, what should I do?
A: It may due to you get the wrong image. Please check your device’s device name and language type and download RUU package from the vender web site again and reset your device and then run RUU again.
Has anybody had this problem..I bought my device as qtek9000 via the official vendor of HTC pda's in Holland... I bought it through my girlfriends telecom company... it comes with WM5.0 UK...
it's not simlocked..of course i just updated the radio rom from 1.9.0 to 1.13 with the tools provided by this forum.
Click to expand...
Click to collapse
You have to use MupgradeNoid.exe
Lt.Cmdr.Ivan said:
Perfectly functioning VGA Mode (regarding to some users)
http://www.jaml.com/MvRTrueVGA/
If you have this problem:
GPRS is connected but the icon is stuck in a loop showing it trying to connect
go here:
http://forum.xda-developers.com/viewtopic.php?t=34995
************************************************************
************************************************************
Aku3.2 compatibility list:
Working
ClearVue 2.3
GSplayer 2.25
ScummVM 0.8 and 0.9
TomTom 5.21
Not working
Blackberry Connect
Special Thanks to
Mamaich
Thanks to
Bepe and friends for his Rom kitchen (This is definitely perfect)
bbs.pdafans.org (For their Rom)
Xda-developers (Knowledge and tools)
Buzzdev.net (Knowledge and tools)
Tuatara (Special tips and tools)
Sub69 (network settings for aku3.2 beta3 and 4 as testing for pushmail)
baudy2 (for compatability of the BB client)
All People submitting programs to working or non working list.
All the testers out there.
All i forgot
Click to expand...
Click to collapse
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
kame1986 said:
Hello there guys.
I got some version of Windows Mobile 5 on my phone working with BB Connect but was wondering if any1 released WM6 working wif BB Connect yet ???
Apologise now if this has been asked b4 but cudnt find anything.
Click to expand...
Click to collapse
Try searching with a google advanced search - limiting your results to http://forum.xda-developers.com
Try say "BBconnect Trinity" or "Blackberry Trinity".
It's there I promise.
If its there plz point me in the rite direction. wud appreciated muchly !
will also search though.
For KAME1986
Hello,
I have just finish to upload the .cab on rapidshare.
http://rapidshare.com/files/50855639/bbconnect_wm6_pro_4.0.0.90.cab.html
Enjoy.
Private69.
@++++
could you upload not in Rapid pls..
thx
Finally i have a steady WM6 version with works with BBConnect !!
Thx
try this...working on my trin
try the steps here to get bbconnect working.
http://www.sems.org/entry.asp?ENTRY_ID=276
Graytraveler, try .84, 90 did not work for me with a stock Tytn II, but 84 did. Or I used Dutty's latest ROM from Xda-developers.com and .92 worked fine with that.
Hchickers, you can try this:
1. Hard reset.
2. Change device ID, from Start -> Settings -> System -> About -> Device ID to HTC_P3450
3. Install a registry editor, such as Resco (www.resco-net.com) or Total Commander (www.ghisler.com, I use 2.5 beta 3). Then edit
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Then soft reset and install Blackberry Connect. This method worked for some people (they weren't using 750, but still). It might work for you as well.
Click to expand...
Click to collapse
even if this isn't any help for people getting started with BBC on there trins, all new BBC updates get posted there.
p.s. If u dont have bb service from your network before!!, then bbc will never work.
Hi,
I have decided to upgrade my still useful Hermes but I'd like to be able to use my BB Connect with it.
Can anyone tell me what I have to do to make it work please ?
I have tested several AKU but it doesn't work (.0.4.3 / .0.0.0 / .0.1.6 and .2.0.0).
Can you please help me making this work ?
Thanks
hi,
you must make backup your data (you can use microsoft myphone service http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-EN ) and after it you must connect your pda to PC. newer version of BBconnect is http://www.sems.org/entry.asp?ENTRY_ID=276 , so you can upgrade your PDA and after it install again microsoft myphone and bbconnect.
tarda said:
hi,
you must make backup your data (you can use microsoft myphone service http://sn1-p3.myphone.microsoft.com/mkweb/Start.po?mkt=en-EN ) and after it you must connect your pda to PC. newer version of BBconnect is http://www.sems.org/entry.asp?ENTRY_ID=276 , so you can upgrade your PDA and after it install again microsoft myphone and bbconnect.
Click to expand...
Click to collapse
Hi,
Thanks for your answer but I don't understand what you mean.
What does backup allow me to do ?
I've already tested latest version of BBConnect and it doesn't work at all.
What do you mean by upgrade my PDA ?
Thanks