Hi guys,
I just tried out the HTC Touch Pro, aka Raphael today.
it is seemly blazing fast as compare to HTC Diamond/Victor...
I have also found out it has a newer radio as compare to the 1.00.25.3 that we are having on Diamond.
Here are some photos, i will add in the snapshots later of the os later...
here's the link to the dump for part00.raw to part02.raw:
http://www.fs2you.com/files/a58787a1-4e64-11dd-a84e-00142218fc6e/
Guys, thanks for the mirrors. Hope the dump is useful one way or another.
Once i have the pre-release version of the rom, i will upload it. but might takes weeks to months before i can get my hands on it.
http://www.filefactory.com/file/062f...M (00to02).zip
http://www.zshare.net/download/15042237a31e9b75/
http://www.mediafire.com/?yybn0wtzgtm
what's the OS build in this one?
C:\Diamond>pdocread.exe -l
457.50M (0x1c980000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 109.50M (0x6d80000) Part02
| 340.50M (0x15480000) Part03
STRG handles:
handle 6fdd38da340.50M (0x15480000)
handle afeac736109.50M (0x6d80000)
handle 4feac712 4.38M (0x460000)
handle efeac6ca 3.12M (0x31f000)
disk 6fdd38da
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk afeac736
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4feac712
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk efeac6ca
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Dumped Completed. But I am not sure i can release this dump since there is HTC Debugs tools in them.
htctouchp said:
what's the OS build in this one?
Click to expand...
Click to collapse
wow, you are fast.
give me a minute here.
i am still dumping the rom.
i will attached the screenshots laters, with device info and windows version. btw, its not retail version.
a screenshot of the bottom edge (like the last screenshot above) but side by side would be great, just to compare the depth differneces. ROM and radio versions would be good too!
@ruffruff:
It'd be nice if you could post the dumps on mediafire.
I guess the radio should be compatible with the Diamond's since it's basically the same hardware; did anybody find out how to dump / flash radios on the diamond yet?
vlad69uk said:
a screenshot of the bottom edge (like the last screenshot above) but side by side would be great, just to compare the depth differneces. ROM and radio versions would be good too!
Click to expand...
Click to collapse
is this the one you are looking for?
btw, i apologised for my poor, lousy photo taking (taken with Nokia N82)
I must have one, is there possibility to buy raphael somewhere.
adwinp said:
@ruffruff:
It'd be nice if you could post the dumps on mediafire.
I guess the radio should be compatible with the Diamond's since it's basically the same hardware; did anybody find out how to dump / flash radios on the diamond yet?
Click to expand...
Click to collapse
hi adwinp,
mediafire will be out of the question as i am in a part of the world where mediafire seems to in-accessible to me. i will try to find a space to upload the parts.
but, is the rom useful in anyway? and which parts are the useful ones? sorry as i am no cooker, just learn to dump roms.
ruffruff said:
is this the one you are looking for?
btw, i apologised for my poor, lousy photo taking (taken with Nokia N82)
Click to expand...
Click to collapse
Perfect, that's just what i was looking for, thanks ruffruff
ruffruff said:
hi adwinp,
mediafire will be out of the question as i am in a part of the world where mediafire seems to in-accessible to me. i will try to find a space to upload the parts.
but, is the rom useful in anyway? and which parts are the useful ones? sorry as i am no cooker, just learn to dump roms.
Click to expand...
Click to collapse
Part00.raw, Part01.raw and Part02.raw
If you have an FTP I can mirror it for you.
hi ruffruff.. eagerly waiting for you to post the rom so we all can port to our devices
ruffruff said:
wow, you are fast.
give me a minute here.
i am still dumping the rom.
i will attached the screenshots laters, with device info and windows version. btw, its not retail version.
Click to expand...
Click to collapse
Love if you could post the radio, current one on Diamond is really poor.
adwinp said:
Part00.raw, Part01.raw and Part02.raw
If you have an FTP I can mirror it for you.
Click to expand...
Click to collapse
i am uploading the parts onto a fs2you.com
btw, i am uploading the entire thing ...
maybe i shouldn't. i will upload part 00 to part 02 as requested.
stay tuned but be patient as my connection ain't that fast.
fs2you is slow
If mediafire isn't available for you, I'd recommend filefactory, zshare or badongo.
You can compress with 7zip (lzma achieves better compression than rar, zip)
adwinp said:
fs2you is slow
If mediafire isn't available for you, I'd recommend filefactory, zshare or badongo.
You can compress with 7zip (lzma achieves better compression than rar, zip)
Click to expand...
Click to collapse
Hi bro,
I have uploaded the files to
http://www.fs2you.com/files/a58787a1-4e64-11dd-a84e-00142218fc6e/
I will try your recommendations when i get home.
but in the mean time, please bear with the speed on fs2you.com
one other thing is that, this is not a retail rom.
hopefully it will be useful for the cookers in the xda community.
or else, i will be making a fool of myself and going through meanless hassle to upload the rom
Thanks for the effort.
You are of course encouraged to post any updates.
^.^
ty so much ruffruff, looking forward for some great cooker to combine the advantage from this rom to our DIAMOND rom
If anyone manages to download this, plz upload it to mediafire, badongo, filefactory or zshare.
fs2you breaks the connection after a few Mb's.
adwinp said:
If anyone manages to download this, plz upload it to mediafire, badongo, filefactory or zshare.
fs2you breaks the connection after a few Mb's.
Click to expand...
Click to collapse
uploading to mediafire 22 minutes remaining
Related
can someone please point me to where i can get ROMs for the new iPAQ 211.
i would like to upgrade to 6.1 if possible. (HP isn't gonna do it....)
thanks
hx2000???
http://forum.xda-developers.com/showthread.php?t=383173
no, like the 210, 211, 212, 213 or 214...
No such beast exists. You are stuck with 6.0 until someone hacks it. But what is wrong with the version you have?
Alan
alan sh said:
No such beast exists. You are stuck with 6.0 until someone hacks it. But what is wrong with the version you have?
Alan
Click to expand...
Click to collapse
Not exactly wrong. But the existing ROM is simply very BUGGY. It can´t compare to the cooked one I´d installed on my past Loox C550 device. There´d be no end to whatever goes wrong with Wi-fi and Bluetooth, CF card support, power management , general instability of the system, various software incommatiblity issues etc. But so far we have to live with it.
Hikoki said:
Not exactly wrong. But the existing ROM is simply very BUGGY. It can´t compare to the cooked one I´d installed on my past Loox C550 device. There´d be no end to whatever goes wrong with Wi-fi and Bluetooth, CF card support, power management , general instability of the system, various software incommatiblity issues etc. But so far we have to live with it.
Click to expand...
Click to collapse
Yup, my 211 is now on the shelf and waiting for an update. My hx4705 is now back in service with Kozura's WM6.1 v5 ROM. I have lost more data with the 211 than ALL the IPAQ's I have used over the years...combined. It is a sad day when the 'development ROM's - not to be used for daily operation' are more stable than the ROM in this new device!
So, I hear that the 21x series bootloader is difficult. Does anyone have details of what the roadblocks are?
dceggert said:
Yup, my 211 is now on the shelf and waiting for an update. My hx4705 is now back in service with Kozura's WM6.1 v5 ROM. I have lost more data with the 211 than ALL the IPAQ's I have used over the years...combined. It is a sad day when the 'development ROM's - not to be used for daily operation' are more stable than the ROM in this new device!
So, I hear that the 21x series bootloader is difficult. Does anyone have details of what the roadblocks are?
Click to expand...
Click to collapse
if you know how to enter the bootload mode of hp21x,I can make a rom for you
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
Hi,
a friend has an ipaq 214 and has difficulties with the original rom (CF-GPS, Wlan).
Therefore I'm also interested in a 6.1 ROM.
I'll call HP on monday to get support - maybe I should ask them how to get into the bootloader mode (if there is any)?
Is there anyone who could really make WM6.1 rom for 214?
That would really be something...
i'm looking for english rom for hp 214. Can someone upload it?
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
We need ENGLISH Rom!!! First thing - find rom, bootloader - is next task.
if you tell me how to copy my rom from pda, i can send you
http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
Looks like someone has figured out how to put their Ipaq 214 into bootloader mode. Their page says to hold down the Calendar & Windows keys and then soft-reset.
Any luck with a 6.1 rom for ipaq 2xx yet?
bluegatar said:
if you know how to enter the bootload mode of hp21x,I can make a rom for you
Click to expand...
Click to collapse
Any luck yet making a wm 6.1 rom for ipaq 21x?
I have the English ipaq 211 version and would really like to try 6.1 to see if it fixes any of the 6.0 instability issues.
Here's the link again the other poster referred to for getting into bootloader mode on the ipaq:
http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
Thanks! tom
Good work. Now the work is how to get the rom file.
My most wantted thing is flashing the 212 to the chinese rom.
Hi,everybody, I have got the ipaq 212 english rom. And I can extract it.
Can somebody give me the ipaq 214 Chinese rom?
The method is :
HKLM\Security\Policies\Policies
valuename '00001001' was set to dword:2, change it to dword:1
use pdocread tools to do this:
pdocread -l
"
224.38M (0xe060000) DSK1:
| 1.50M (0x17f000) Part00
| 2.13M (0x220000) Part01
| 57.88M (0x39e0000) Part02
| 162.88M (0xa2e0000) Part03
1.91G (0x7a1fc000) DSK2:
| 1.91G (0x79f00200) Part00
1.88G (0x78800000) DSK3:
| 1.88G (0x787e0600) Part00
24.75M (0x18c0000) IPQ1:
| 24.75M (0x18bf000) Part00
STRG handles:
handle e6f4f7da 24.75M (0x18bf000)
handle a701d116 1.88G (0x787e0600)
handle 4796c202 1.91G (0x79f00200)
handle 67c8652a162.88M (0xa2e0000)
handle 67c9a11a 57.88M (0x39e0000)
handle 07c9a0f6 2.13M (0x220000)
handle a7c9a0ae 1.50M (0x17f000)
disk e6f4f7da
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a701d116
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4796c202
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 67c8652a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 67c9a11a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 07c9a0f6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7c9a0ae
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
"
then
pdocread -w -d DSK1: -b 0x800 -p Part02 0 0x39e0000 Part02.raw
the part02.raw is the rom file
I can use viewimgfs tools to extract the part02.raw file.
Now can some body flash the rom ?
You can download the english rom file from this
http://bbs.pdafans.com/viewthread.php?tid=649400&extra=page=1&filter=type&typeid=240&area=
Can somebody try to use pdocwrite command to write the ROM?
finally something is moving with 21x roms....
great news, now we just need to find someone smart, to make wm6.1 rom!
thank you everyone for informations!
WODP
The good news is I have got the English and Chinese ROM file.
The bad news is :when I try to write the ROM with pdocwrite tools, it failed, the pdocwrite tools said "media protected". So I can't flash the rom file to the machine now.
So we need the solution of get the ipaq to the bootloader mode or the way to update with sd card.
Can someone help ?
wizard_mini said:
The good news is I have got the English and Chinese ROM file.
The bad news is :when I try to write the ROM with pdocwrite tools, it failed, the pdocwrite tools said "media protected". So I can't flash the rom file to the machine now.
So we need the solution of get the ipaq to the bootloader mode or the way to update with sd card.
Can someone help ?
Click to expand...
Click to collapse
I'm assuming that you've already tried this http://www.handhelds.org/moin/moin.cgi/HpIpaq214HowTo
As per the title, could some kind soul, please upload the stock ROM and SPL. Should any of us need to send the MDA Compact IV back for repair.
Thanks...
i am still running the stock rom but not the spl i upgraded to hardspl 1.40 delveloper.
of there is a guide up for dumping the rom off the device then i will be more then happy to share. if someone can point me the right way.
ofcourse if anyone can still grab the stock spl. that would be cool too
mattie01 said:
i am still running the stock rom but not the spl i upgraded to hardspl 1.40 delveloper.
of there is a guide up for dumping the rom off the device then i will be more then happy to share. if someone can point me the right way.
ofcourse if anyone can still grab the stock spl. that would be cool too
Click to expand...
Click to collapse
follow this:
http://forum.xda-developers.com/showpost.php?p=2370527&postcount=10
from what I understand the spl don't differ from the htc one or from other providers. so no need there
Just ordered mines today, apparently there were 50 in stock when i called them, after i ordered mine on upgrade there were 30 left so be quick to get one. They said that it should arrive by 1pm on TUESDAY!!! don't think that i can wait that long. lol
Upgrade details:
MDA COMPACT IV- £99.99
12 Month Contract: £15.00 (100mins +100txt)
Total over contract: £280.00
Tell me if thats a good deal.
Cheers
I will get my T-Mobile Compact IV on next thursday. If nobody else has already graped and uploaded the stock ROM, then I will try to do it. Shoud not be a problem for an IT-er, think so
I also like to have a copy of the stock ROM before trying to install one of the cooked newer ROM from TLR or DPT.
Will also try to grab the stock SPL if possible.
teammee, thanks for the link, I will try to read the manual first
Can anyone tell me if the compact 4 has wifi? i thinik they have removed it but now too sure.
yes the compact 4 has wifi.
i tried following the link and i am able to access the phone using pdocread -l to get a list of partitions on the phone.
C:\itsutils>pdocread -l
210.63M (0xd2a0000) DSK1:
| 3.12M (0x31f000) Part00
| 4.38M (0x460000) Part01
| 118.25M (0x7640000) Part02
| 84.88M (0x54e0000) Part03
3.75G (0xf0000000) DSK7:
| 3.75G (0xf0000000) PART00
STRG handles:
handle 4654f2e2 3.75G (0xf0000000)
handle a7c9f8da 84.88M (0x54e0000)
handle c7db27be118.25M (0x7640000)
handle c7db279a 4.38M (0x460000)
handle a7db2752 3.12M (0x31f000)
disk 4654f2e2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7c9f8da
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c7db27be
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c7db279a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a7db2752
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
then i try and run
C:\itsutils>pdocread -w -d DSK1: -p Part00 0 0x31f000 Part00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
ERROR: ITReadDisk : read 00000000 bytes - The parameter is incorrect.
so i guess i am doing something stupid...
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Paleaos said:
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Click to expand...
Click to collapse
many thanks..
Thanks from me too!
Things like that should really be a sticky, or in the Wiki. I spent ages looking and found nothing, hence my original post!
After finding these, I've already made the jump and tried my 1st rom. Elite 3.0!
Must say I'm pretty impressed after running the stock T-Mobile for 4 days. Now I've got my head round all this I went for it.
There seems to be no definative choice of rom, it's down to personal preference, but after using T-Mobiles V1.37 and Radio .03, I now also upgraded to Radio .05
Both the Elite rom and new radio add up to a far superior phone. Take the leap, it's worth it.
Can't see anyone wanting to go back to the T-Mobile stock rom unless your sending it back under warranty for replacement.
Enjoy!
PS. I've been using Symbian phones for years Nokia 6630, 6680, N80 and finally N95. It took a bit of reading, but once you get your head round it, it's Simple.
PPS. The Elite rom 3.0 also includes all the settings for T-Mobile that runs in a wizard, but if you fancy another rom then you can download a settings CAB file that includes the T-Mobile settings if it's not included in the rom you choose.
And here is the CAB for the T-Mobile settings
http://www.modaco.com/content/htc-d...g-database-fix-adds-t-mobile-connection-data/
Paleaos said:
There has been links for a couple of weeks for a T-Mobile Stock Rom.
Here you go:-
http://forum.xda-developers.com/showthread.php?t=405835&highlight=t-mobile+stock+rom
&
http://forum.xda-developers.com/showthread.php?t=406423&highlight=t-mobile+stock+rom
Oh and the errr Stock SPL's
http://forum.xda-developers.com/showthread.php?p=2324837#post2324837
Click to expand...
Click to collapse
Thanks! Will still grab my stock ROM when I get the phone, so we can add the Dutch stock T-Mobile ROM to the list.
Download Dutch stock T-Mobile MDA Compact IV ROM here:
http://rapidshare.com/files/1324381...iamond_52.26a.25.09_Radio_1.00.25.03.rar.html
killabie said:
Download Dutch stock T-Mobile MDA Compact IV ROM here:
http://rapidshare.com/files/1324381...iamond_52.26a.25.09_Radio_1.00.25.03.rar.html
Click to expand...
Click to collapse
Can somebody help me please?
I've downloaded the dutch mda 4 stock rom, but it doesn't come with a update utility. so i tried another installer but it gives me an error on 1%
Then it says: "this update utility cannot be used for your PDA phone. please check your update utility"
anyone knows how to flash the file or knows what update utility i can use?
thanks in advance
Download custom RUU,put the file in the folder with custom RUU and flash.
skrap3 said:
Download custom RUU,put the file in the folder with custom RUU and flash.
Click to expand...
Click to collapse
Thanks fot the quick reply.
i've tried it but still the same error..
i have spl olinex 1.40..this got anything to do with the problem?
dazzie said:
Thanks fot the quick reply.
i've tried it but still the same error..
i have spl olinex 1.40..this got anything to do with the problem?
Click to expand...
Click to collapse
Dit you solve the problem and how?
Hi to all the Samsung experts, I currently have a Samsung i900 and am looking for a way to extract my rom and create a flashable format. I have used pdocread to extract 3 .raw files but am not sure how to proceed from here. Can anyone advise? Thanks.
Hoping that the i780 istruction can be used for the omnia, the relevant posts are here..
http://forum.xda-developers.com/showpost.php?p=2237280&postcount=10
http://forum.xda-developers.com/showthread.php?t=393490
Thanks, I have read those threads, problem is you apparently need a flashable .bin to start with which in this case I do not so am looking for a way to use the .raw files only. Do you know if that is possible?
efjay said:
Thanks, I have read those threads, problem is you apparently need a flashable .bin to start with which in this case I do not so am looking for a way to use the .raw files only. Do you know if that is possible?
Click to expand...
Click to collapse
No you don't need the bins, you can start from the raw files.
Just look at the famusc kitchen and read the included instructions.
Ok here is a way to dump the nb file and then dump its contents.I have already done that, including xip
Use itsutils and following command in dos window :
psdread -1 0 0xDISKSIZE os.nb
Then use imgfs tools or tazio tools to dump, and further processing.
We need now how to flash back the custom os.nb to omnia
still searching for sd card flashing combinations
@The Solutor: I have read the famusc kitchen docs and it explicity states you need an existing .bin PDA rom. However there are a few commands in there that may be worth checking out.
@hdubli: I will try the command you suggested later today. What are the tazio tools? And dont Samsung phones use .bin files to flash rather than .nb?
You don't need the bin.
Here step by step:
- Downlad and install the kitchen
- Copy Part02.raw into the kitchen folder
- Open cmd and type: ImgfsToDump Part02.raw (This will create dump folder)
- Execute RecreateBin.exe
You got your bin file!!!!
mievalt said:
You don't need the bin.
Here step by step:
- Downlad and install the kitchen
- Copy Part02.raw into the kitchen folder
- Open cmd and type: ImgfsToDump Part02.raw (This will create dump folder)
- Execute RecreateBin.exe
You got your bin file!!!!
Click to expand...
Click to collapse
Do you mean RecreateBin.bat? There is no RecreateBin.exe and looking at the contents of the .bat file I dont think it will work as it makes reference to i780 files which I dont have and most likely wont work with the Omnia.
imgfsfromdump imgfs_raw_data.bin new_imgfs.bin
del imgfs_raw_data.bin
ren new_imgfs.bin imgfs_raw_data.bin
make_imgfs i780.nb0.payload.body -nosplit
merge i780.nb0.payload.header i780.nb0.payload.body i780.nb0.payload
nbmerge -data 2048 -extra 8 i780.nb0 -conservative
yes it is the .bat file sorry.
I780 should just be name of the files that you get at the end...
I can't say if it works you just have to give it a try...
But that would be the way we do it with our i780 roms...
Try and report. You should get a i780.bin file.... otherwise it should stop with an error.
I have a Samsung Omnia German version and would like to get the english version. Anybody know where to find the WWE ROM and CID unlock or what i need to install it?
any luck
Any luck on cooking a samsung i900 Rom
JesperRas said:
I have a Samsung Omnia German version and would like to get the english version. Anybody know where to find the WWE ROM and CID unlock or what i need to install it?
Click to expand...
Click to collapse
What does ur version read?
My one read i900XXHE4. I am also looking for way to upgrade to i900DXHG4
anyone manage to extract the rom?
or is there anyway i could extract those dll in the roms?
would like to try reverse it see if can extract the data for the accelerometer
Link
Here is the Link
For the update
any body can backup the rom G2 and previous and let us flash it? i sooo want the old rom back.. G4 fully sucked with too many issues on it..
What is the build info on G4?
I can dump the rom but you will have my serial #
silencer22 said:
anyone manage to extract the rom?
or is there anyway i could extract those dll in the roms?
would like to try reverse it see if can extract the data for the accelerometer
Click to expand...
Click to collapse
it looks like a .bin file and oddly enough executing it changed all my Atom .nb0 files to 'open with' USDL4...
Do kitchen tools exist or Perhaps somebody could be commisioned to make tools for us, I'd be up for that!
whats the go on creating a flashable rom? i tried to flash chinese G8 rom and i regretted it.. now i cant flash it back to WWE G4 rom. =( anyone here able to make flashable rom or F8 or G2 WWE roms? pls pls pls..
I tried to back up my i900 Omnia ROM and get this:
C:\12>pdocread -l
128.46M (0x8076000) DSK1:
| 1.47M (0x179000) Part00
| 2.58M (0x295800) Part01
| 124.40M (0x7c66800) Part02
90.44M (0x5a70000) DSK2:
| 90.43M (0x5a6f000) Part00
0.00 (0x0) DSK5:
| 0.00 (0x0) PART00
15.00G (0x3c0000000) DSK3:
| 15.00G (0x3bffffc00) Part00
STRG handles:
handle 6698a06e 15.00G (0x3bffffc00)
handle a698a026
handle c6cc2472 90.43M (0x5a6f000)
handle 06e0479a124.40M (0x7c66800)
handle 26e04776 2.58M (0x295800)
handle 26e0472e 1.47M (0x179000)
disk 6698a06e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk a698a026
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c6cc2472
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 06e0479a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 26e04776
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 26e0472e
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C:\12>psdread -1 0 0xDISKSIZE os.nb
remote disk 1 has 65772 sectors of 2048 bytes - 128.46Mbyte
SerialNr: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CopySDCardToFile(remote, 1, 0x0, 0xd, os.nb)
ERROR: ITReadSDCard - The parameter is incorrect.
C:\12>pdocread -w -d FLASHDR -p Part00 0 0x179000 Part00.raw
ERROR: ITTFFSGetInfo - The device is not ready for use.
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x0, 0x179000, Part00.raw)
ERROR: ITReadDisk: outbuf==NULL
- The device is not ready for use.
Any thoughts?
I am improving :
C:\12>psdread -1 0 0x8076000 i900XHHG4.nb
remote disk 1 has 65772 sectors of 2048 bytes - 128.46Mbyt
SerialNr: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
CopySDCardToFile(remote, 1, 0x0, 0x8076000, i900XHHG4.nb)
but I am waiting more than 30 min and no activity. How long does it take to copy 128MB?
Hello all!
I just got myself the Telus Diamond the other week from Telus up here in Canada. (beautiful little thing) ...but its CDMA. I was curious about all of the ROMs available right now... they're designed for the GSM phones, and I'm guessing they are incompatible with my CDMA diamond.
my question is this:
-Do the Current GSM ROMs work with my CDMA Diamond?
....and if not....
-Is anybody currently working on ROMs specifically for CDMA or Telus Diamonds?
any help or info would be much appreciated!!
hi,
can u tell me how big your battery is ? 900mha or 1340mha ?
Joeball88 said:
Hello all!
I just got myself the Telus Diamond the other week from Telus up here in Canada. (beautiful little thing) ...but its CDMA. I was curious about all of the ROMs available right now... they're designed for the GSM phones, and I'm guessing they are incompatible with my CDMA diamond.
my question is this:
-Do the Current GSM ROMs work with my CDMA Diamond?
....and if not....
-Is anybody currently working on ROMs specifically for CDMA or Telus Diamonds?
any help or info would be much appreciated!!
Click to expand...
Click to collapse
other roms wont work, drivers are much different, im curious any ways what is ur rom version,
Dutty...since you're a MOD, wouldn't it be prudent to have a subforum for the CDMA version of the Diamond? I know it would help me if I owned the CDMA version. I certainly would not want to follow the guidelines in this forum and take a chance on bricking my phone. I used to own a Wizard, and there was a subforum for the G4 version of the wizard (that had different flashing instructions). Just a thought.
Thank you kindly for the quick replies everyone!
For the record, these are the specs for my Diamond:
-Telus Diamond, English, DIAM500
-ROM Version 1.06.661.1 (Jul 21/08)
-Radio Version 0.99.90V
-Battery 1350 Mah (I believe, as this model is somewhat larger than the Euro versions, and has a different 'matte' backplate)
And as for a separate CDMA forum, I think that would be a wonderful idea. I know the version I have just came out last week, and some carriers in the US are going to have CDMA versions as well. I think more and more people are going to start buying this phone, and they'll be a bit confused about trying to install new ROMs etc.
Thanks for all your help folks!
Joeball88 said:
Thank you kindly for the quick replies everyone!
For the record, these are the specs for my Diamond:
-Telus Diamond, English, DIAM500
-ROM Version 1.06.661.1 (Jul 21/08)
-Radio Version 0.99.90V
-Battery 1350 Mah (I believe, as this model is somewhat larger than the Euro versions, and has a different 'matte' backplate)
And as for a separate CDMA forum, I think that would be a wonderful idea. I know the version I have just came out last week, and some carriers in the US are going to have CDMA versions as well. I think more and more people are going to start buying this phone, and they'll be a bit confused about trying to install new ROMs etc.
Thanks for all your help folks!
Click to expand...
Click to collapse
ok yes thid rom will not work, if i had the time i could make a rom for the cdma but time so important for me now
I also now have a cdma telus diamond the battery is 1340mah
the rom info is as follows.
rom ver. 1.06.661.1
rom date. 07/21/08
radio ver. 0.99.90V
TomInMB said:
Dutty...since you're a MOD, wouldn't it be prudent to have a subforum for the CDMA version of the Diamond? I know it would help me if I owned the CDMA version. I certainly would not want to follow the guidelines in this forum and take a change on bricking my phone. I used to own a Wizard, and there was a subforum for the G4 version of the wizard (that had different flashing instructions). Just a thought.
Click to expand...
Click to collapse
great idea bro, will speak to the other mods about it,
duttythroy said:
great idea bro, will speak to the other mods about it,
Click to expand...
Click to collapse
Thank you kindly. Would be great for us Telus folks
This would be awesome!
WERD!
surprised theres not a seperate subforum for the CDMA diamond already. The main forum can be shared, but the ROM sections should be seperate.
I just asked DCD if hes looked at the telus dump yet, hes said hes going to work on diamond and pro already.
It's going to be the same problem here in the US when Sprint or Verizon will ship their version of the diamond (HTC Victor).
I will try to cook one rom for my old Wizard (learning purpose), because if I can't have the benefit of cooked rom, I'm not sure I will choose this model.
Youmoussa said:
I will try to cook one rom for my old Wizard (learning purpose), because if I can't have the benefit of cooked rom, I'm not sure I will choose this model.
Click to expand...
Click to collapse
Dont worry, DCD and no2chem are both already working on ROMs for this beast, we'll have stuff available PDQ.
Dump CDMA telus...
This is the result of my dump on a Touch Diamond CDMA version from Telus..
Guess i am the 1st one to dump a CDMA phone?
Code:
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pdocread -l
215.50M (0xd780000) FLASHDR
| 3.12M (0x31f000) Part00
| 4.00M (0x400000) Part01
| 105.50M (0x6980000) Part02
| 102.88M (0x66e0000) Part03
3.75G (0xf0000000) DSK8:
| 3.75G (0xf0000000) PART00
STRG handles:
handle#0 8e6e6762 3.75G (0xf0000000)
handle#1 2fed9756 102.88M (0x66e0000)
handle#2 4ff90baa 105.50M (0x6980000)
handle#3 4ff90b86 4.00M (0x400000)
handle#4 4ff908d2 3.12M (0x31f000)
disk 8e6e6762
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 2fed9756
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4ff90baa
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4ff90b86
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 4ff908d2
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pdocread.exe -w -h 0x
4ff908d2 -b 0x800 0 0x31f000 Part00.raw
CopyTFFSToFile(0x0, 0x31f000, Part00.raw)
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pdocread.exe -w -h 0x
4ff90b86 -b 0x800 0 0x400000 Part01.raw
CopyTFFSToFile(0x0, 0x400000, Part01.raw)
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pdocread.exe -w -h 0x
4ff90baa -b 0x800 0 0x6980000 Part02.raw
CopyTFFSToFile(0x0, 0x6980000, Part02.raw)
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pdocread.exe -w -h 0x
2fed9756 -b 0x800 0 0x66e0000 Part03.raw
CopyTFFSToFile(0x0, 0x66e0000, Part03.raw)
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>pmemdump.exe 0xa80000
00 524288 SPLdumped.nb
CopyProcessMemoryToFile(00000042, a8000000, 00080000, SPLdumped.nb)
E:\Download\Pocket PC\Touch Diamond\itsutilsbin-20080731-2>
Rassal said:
This is the result of my dump on a Touch Diamond CDMA version from Telus..
Guess i am the 1st one to dump a CDMA phone?
Click to expand...
Click to collapse
Yep, suppose you are the first!
Hey guys,
Yea i definatly think its a great idea, i also just got myself a diamond with telus. as a matter of fact i work for Telus, and if someone came up with a good enough rom, i could/would do some publicity for this website and tell my clients to come here. I installed Diamond Tweaks 0.5, and that worked good, except it crashed my phone when i tried to use the burst mode with the camera hehe...nothing too bad i just had to do a reset. Anyways if someone does come up with a Rom for the CDMA version it would be enormously appreciated!!!
UPDATE!!
Hello Folks!
Good news on the CDMA Diamond Front!
Seems the good folks over at PPCGeeks.com have been working on a HardSPL specifically for the CDMA Diamond!!
http://forum.ppcgeeks.com/showthread.php?t=35839
Pavin' the way for some custom ROMs!!
TeluS Diamond ROM Upgrade Questions..
I am new to this forum so I apologize if my questions seem very basic.
1. I have a Telus Diamond and would like to get a ROM update to get the locked featues working - so is one available.
2. What is HardSPL - is something I need prior to an ROM upgrade - or is it part of the ROM upgrade or am I totally out to lunch.
Thanks in advance...
Any updates for the CDMA section of the forum?
youd think so, but not yet.
Hi there,
My brother just purchased the LG Incite. I, coming from the Kaiser ROM Development, would love to cook for it, as it is rather sluggish out of the box. However, I am not very familiar with non-HTC devices. So, if anyone out there has an LG Incite and knows how to cook for it, I would like to make a kitchen for evveryone to cook for this phone
Can anyone help out?
Thanks
anyone?
I'm using the LG incite, but the official rom suck.
I really want to have customize rom for it.
And I know notthing about the kitchen
Hey guys!
I have an LG Incite. If you can show me /tell me how to do it, I can probably be of help to unlock the firmware. I really want a more user friendly phone
Oh yeah I forgot. I found out how to get windows 6.5. I just need to find a way to slipstream it into the incite.
any ideas?I don't mind bricking my phone. I hav a backup software.
rkrishnan2012 said:
Hey guys!
I have an LG Incite. If you can show me /tell me how to do it, I can probably be of help to unlock the firmware. I really want a more user friendly phone
Oh yeah I forgot. I found out how to get windows 6.5. I just need to find a way to slipstream it into the incite.
any ideas?I don't mind bricking my phone. I hav a backup software.
Click to expand...
Click to collapse
do you have a micro SD card?
yup
yes I do (2gb). Any ideas?
even i would like to help
YAY!
SO...... now what?
can one of you manage to connect the incite to the computer and by using activesync, try to copy the windows folder and post it somehow on this forum?
PLEEEZE?
P.S., HEY! it's a fellow indian!
rkrishnan2012 said:
YAY!
SO...... now what?
can one of you manage to connect the incite to the computer and by using activesync, try to copy the windows folder and post it somehow on this forum?
PLEEEZE?
P.S., HEY! it's a fellow indian!
Click to expand...
Click to collapse
thank you for being so eager to help!
look here for what to do:
http://forum.xda-developers.com/showthread.php?t=238945
and post the dump.bin here
thanks again
yes waiting for the dump file
karim_31 said:
yes waiting for the dump file
Click to expand...
Click to collapse
i have 2 incites and still under 30 day warranty.
will using the grab_it - invisible ROM dumper cause or doing anything to the phone that will void the 30 day warranty?
Let me know and I will dump.
Sorry if this is a newb post.
redtaz said:
i have 2 incites and still under 30 day warranty.
will using the grab_it - invisible ROM dumper cause or doing anything to the phone that will void the 30 day warranty?
Let me know and I will dump.
Sorry if this is a newb post.
Click to expand...
Click to collapse
not at all!
mbarvian said:
not at all!
Click to expand...
Click to collapse
sweet. when i dump the rom where or who should i send the rom to?
redtaz said:
sweet. when i dump the rom where or who should i send the rom to?
Click to expand...
Click to collapse
put it in a zip file, upload it to mediafire.com and post the link here!
mbarvian said:
put it in a zip file, upload it to mediafire.com and post the link here!
Click to expand...
Click to collapse
one more thing...
which grab it should i download?
redtaz said:
one more thing...
which grab it should i download?
Click to expand...
Click to collapse
i would try this one:
http://forum.xda-developers.com/attachment.php?attachmentid=23564&d=1119937614
or if that doesn't work:
http://forum.xda-developers.com/attachment.php?attachmentid=23565&d=1119937589
make sure to follow the instructions, good luck!
thanks again
ahhhhhhhhhhh! we will have to wait till later today. I thought i had my micro sd card reader with me...
Question: If i save a copy of this rom dump, would i be able to use it to revert back to stock if another rom is flashed to it?
hey mbarvian,
can you assist in getting a grabber for 256? the rom size of the incite is 256K...
thanks!
redtaz said:
hey mbarvian,
can you assist in getting a grabber for 256? the rom size of the incite is 256K...
thanks!
Click to expand...
Click to collapse
actually, I just tried out grab_it, and I wouldn't recommend it. For a complete dump, please follow these steps:
Download the attachment, and install it on your device
Soft-reset
Download this file
Once it is finished, make a new folder on your C: drive named itsutils
Extract all the files to that folder
Plug in your device to your computer
Then click Start > Run, type in cmd.exe, then click then push Enter
Type in these commands:
Code:
cd C:\itsutils
Code:
pdocread -l
You should get something like this:
Code:
210.38M (0xd260000) FLASHDR
| 3.12M ([COLOR="DarkOrange"]w[/COLOR]) Part00
| 3.50M ([COLOR="Red"]x[/COLOR]) Part01
| 69.38M ([COLOR="Blue"]y[/COLOR]) Part02
| 134.38M ([COLOR="Lime"]z[/COLOR]) Part03
STRG handles:
handle e7489c1a134.38M (0x8660000)
handle 474960e6 69.38M (0x4560000)
handle c74b0fda 3.50M (0x380000)
handle 074b0eee 3.12M (0x31f000)
disk e7489c1a
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 474960e6
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk c74b0fda
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
disk 074b0eee
0 partitions, 0 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
take note of the colored letters at the top. They will not show up like that, but I have just put them there as variables for when you type in these codes (replace w,x,y,z with what you see up there, basically ):
Code:
pdocread -w -d FLASHDR -b 0x800 -p Part00 0 [COLOR="DarkOrange"]w[/COLOR] Part00.raw
Code:
pdocread -w -d FLASHDR -b 0x800 -p Part01 0 [COLOR="Red"]x[/COLOR] Part01.raw
Code:
pdocread -w -d FLASHDR -b 0x800 -p Part02 0 [COLOR="Blue"]y[/COLOR] Part02.raw
Code:
pdocread -w -d FLASHDR -b 0x800 -p Part03 0 [COLOR="Lime"]z[/COLOR] Part03.raw
Please note that the bigger ones (Part02 and Part03) may take quite some time (15 minutes sometimes), but it is important that you do not close the Command Prompt window until they are all done!
After that, put Part00.raw, Part01.raw, Part02.raw, and Part03.raw in your itutils folder into a .zip file, upload them to mediafire.com, post the link here, and I'll take a look at them
thank you very much
if you do not understand all of it, please just ask me!
thanks
Will this cause anything to happen to the phone? (like erase the factory rom) or is it just a rom dump? Will i have to worry about the IMEI being a part of that dump?
I just DL the cab and app so let me know and i will proceed.
Thanks