Related
I along with a ton of other Harrier owners can't wait to get WM5!!!
In light of the "NO GSM" error people are getting I'm assuming there is something in the BA ROM that checks the Radio on boot.
Has anyone actually opened up the latest 2003SE Harrier ROM and the latest 2003SE BA ROM and actually looked for what the difference is? I'm hoping someone can do that and maybe modify the WM5 BA ROM thereby compatible with the Harrier.
I've tried opening both my 2003SE ROM using the "er2003edit" but it keeps saying the password is wrong. Also it won't open the WM5 BA ROM.
Any thoughts???
Hi, I have the harrier XV6600 and I have a bit knowledge related to the ROMS and stuff, I'll be trying to figure out what the difference is, i'm assuming it's the whole Kernel it self, but not sure, anyways, can you provide me with as much information about ur device... carrier, rom etc... also where u able to boot up WM2005 at all on your device? I get to the screen with the four colors then get to the menu, and ones I hit the envelope it just gives me a white screen and it stays there for ever until i reset and then i'm back to step one..
I would like to know if it atleast is capable of booting up the OS before I decide to spend sometime trying to make it compatible with the CDMA network.. thanks
No Harrier owners as of yet have gotten it to boot. We all simply get the NO GSM error after install and after the screen you mentioned you got to.
I've cooked my ExtROM onto my SD Card and resized my memory so I'm ready for it atleast. I also have the correct installer for the Harrier as all of the Harrier specific tools for unhiding, unlocking, and resizing the ExtROM. Also I have all of the 2.04 ROM version files of all the .exe's that all the BA guys said WM5 was missing and had posted from their 2003SE ROM's. Of course we don't have the WiFi file. I also have the patched WM5 ROM nbf without the file error that mamaich made.
It's the kernel thats different, 2003 and 2005 are using the same bootloader. Looking at the 2003 gsm rom, the kernel is very similiar to the 2005 rom. Getting the cdma radio layer running would be easy enough, but, we have to get the kernel to boot the OS. Not sure if the 2003 kernel will do it, i'll give it a shot though. May even be able to throw one together in PB
,Dave
Sweet, I'll be waiting for the results of your attempt!
Alex
HKLM\Drivers\BuiltIn\RIL
"dll rilcdma.dll"
This is what is preventing the boot-up, I believe.
Any HKLM\Drivers\BuiltIn that are unable to load will cause the phone not to boot up.
I am sure this says "dll rilgsm.dll" on the BA. We need to change this to "rilcdma.dll" and copy over the .dll from the 2.04 ROM.
Then dump the ROM and load it on the Harrier, this should hopefully get it booting, if there are not any other bad device drivers.
We also need to make sure this is based off the new patched ROM that mamaich made...
Well here is the rilcdma.dll from my 2.04 ROM:
Wow, you guys rock. It sounds like after some work that it will be possible. I just wish I knew how to help... I do have several devices to test on but I have no rom building experience...
Can't we just hex edit the information of WM2005 dump file? using a hexeditor, but then we would need to copy the file, I'm actually thinking that the rilcdma.dll file might be included already, I remember ones flashing my device with a 2003Se rom, and finding the rilgsm.dll file and my phone was working properly? maybe it's generic to include both the files?
either way we would need to get someone with a gsm phone to do those changes, and copy that file, dump the file, and then we'd need to try them on our devices?
ANY GSM users outhere wanna help?
Bump.
Glad to here people that know what they're doing are working on this.
Hopefully the thread topic won't scare off EVERY GSM user.
Course... they're all too busy playing with the new OS to notice us
Bump
I think it will be a while, if at all, that there will be a CDMA version.
Most of the developers are using the GSM version and thus have no way of testing the CDMA one. Additionally the GSM version is not working perfectly yet, so this will add to the time that it takes. I think we will see a CDMA universal before we see WM5 for the Harrier
*Bump*
The 6700 is out through Sprint! Maybe we'll be able to rip the necessary CDMA files from it? http://www.sprint.com/business/products/phones/ppc6700_allPcsPhones.jsp
Holy crap! Somone "check" one out in a store and grab the ROM with an sd card...
They're only available through business channels right now and should ship next week according to those that have ordered. They were also told that consumer channels should be able to order next week sometime, but no word on when they might start popping up in the stores. Remember, this ROM won't directly copy to our devices, but we might be able to get the necessary files off of it to get WM5 working on our Harriers. It's another step in the right direction at least.
Bump again, lol....
Apache ROM:
http://forum.xda-developers.com/viewtopic.php?p=157140
Well, I'm no expert, and I have no equipment, no software, and no skills, lol. So I can't help much here. But I do applaud the effort and wish there were some way I could contribute.
Anyway, I would imagine that if you take the ROM from an Apache (Sprint PPC-6700) and compare it to the ROM of a Wizard, whatever the differences are is probably exactly what the differences between the Harrier and Blue Angel ROMS need to be (for WM5 to be functional on both).
Just a thought...
all you people out there waiting for this to happen should probably check out this thread... looks like good news
http://www.pdaphonehome.com/forums/showthread.php?s=&threadid=60026&perpage=20&pagenumber=1
Hi all,
I'm loving the WM5.0 ROMs, however I cannot seem to get GoodLink to install (it claims my version of WM is unsupported). I've noticed for some other platforms, people have managed to change their WM version number to effectively combat this (fooling GoodLink to install).
Any idea how I can change the WM version number to fool GoodLink to install?
Any help would be greatly appreciated.
if you provide me with the install cab i may help, but first i have to look at it
Sure, I've uploaded the install cab here.
Thanks a lot.
First i think this is smartphone release, not pocketpc one, second your link does not work
Apologies.
Here is the correct file. I selected the wrong one
Matt
I dont know what this software is, and how to configure it but here is working WM5 cab of it, it installs and the some kind of setup wizard comes up, and then it asks for email and for pin
Thanks for your help. However, the issue with GoodLink is that it does a check after you enter your PIN on the WM version. At this point, it sees my BA is 5.1 (not 5.0) and fails the install.
I've seen other ROMs change the version number to avoid this problem and didn't know if it's something that's easy to do (either via a hex editor or a registry fix).
Cheers,
Matt
it is compatible with older wm5 roms without the 5.1 core, i am not sure where is the correct address to change for blueangel
and i think that it is time for them to update their app, there are no WM 5.0 devices anymore on the market
Thanks xplode, I'll try finding, downloading & installing a 5.0 ROM tonight then and see if it all works.
Agreed that they should update their software!
Matt
Just a followup to the above, I cannot seem to find any older images for download, the earliest I can find is "xplode_AKU3.3_Beta1_R1.rar" which still has a 5.1 core.
Any ideas where I can get an older WM5.0 image from? I'd go back to 2003, but that's not supported either (between a rock and a hard place with GoodLink!)
Matt
Hi guys n gals.
I need help. Here's where I am so far.
Am trying to add SDHC support to a vanilla WM5 rom.
I can get it running up to 4GB support with the genuine HTC update however, when I update with the patched DLLs that are used to for 4GB+ I lose the storage card completely.
Oddly enough I get the same thing with the patched DLL for the HTC Home Plugin.
And yet both run happily on WM6
Ah you can see the connection here can't you??
I am certain WM5 is checking the digital signature in the .dll, finding it invalid and chucking it out. I can resign the .dlls till the cows come home and its still happening.
SO WHAT DO I DO NOW?
Am thinking down this road:
If both work in WM6 then the Digital Signature checking must be not implemented or at least bypassed / told to ignore it by the os.
Question is: HOW???
Anyone know??
Ta.
PsiDOC
I haven't been playing with roms for over a year now, but have you tried ftp://xda:[email protected]/Universal/Tools_and_Programs/Default_Signed_DisableSecurity.CAB ? And would you please tell me which is the ROM you're using as base 'cuz I'm planning to build one WM5 ROM too, but use WM6's interface which I hopefully will manage to extract
tsekov,
Thanks for the reply. I am using this rom or at least a variant of it as I am currently developing it. I have security disabled by default and inbuilt into the rom at build time, so it's a bit beyond that. I do have a few more ideas that may work, but please, if you have any other suggestions to bounce about I'd love to hear from you.
Psi
What I meant by base rom was on which rom is your WM5 AKU3.3 rom based? Is the T-Mobile rom? And have you set HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000101a from 0 to 1 ? I think it is done by the disable_security.cab but still you can check it.
Yes that's the base rom, and that registry entry is set to 1 in my cooked rom.
Psi
After surfing a little I found out that the Hypercore Kitchen has a Security Signing tool in C:/Core/Tools/WM5Security after you install it. You can download it from: http://forum.xda-developers.com/showthread.php?t=324682
WM6.1 Rom for Treo 700wx
Alltel/Bell/Telus - Release 1.3 Build 20931
Verizon - Release 1.3 Build 20931
Sprint - Release 1.3 Build 20931
CE OS 5.2.20931 (Build 20931.1.5.0)
Release 1.2 with the following changes
Updated XIP to 20931. Build numbers now match.
Alltel/Bell/Telus - Release 1.2 Build 20931
Verizon - Release 1.2 Build 20931
Sprint - Release 1.2 Build 20931
CE OS 5.2.20924 (Build 20931.1.5.0)
Release 1.1 with the following changes
Added Internet Explorer Mobile 6, and Adobe FlashLite 3.0 for full web browsing.
Change PagePool size from 4Mb to 8Mb to better support IEMO6.
Alltel/Bell/Telus - Release 1.1 Build 20931
Verizon - Release 1.1 Build 20931
Sprint - Release 1.1 Build 20931
CE OS 5.2.20924 (Build 20931.1.5.0)
Release 1.0 with the following changes
Change PagePool size from 2Mb to 4Mb. Dramatically improved speed. Special thanks to SnoopDawg and snake334 for spotting and coming up with a solution to this problem!
Alltel/Bell/Telus - Release 1.0 Build 20931
Verizon - Release 1.0 Build 20931
Sprint - Release 1.0 Build 20931
CE OS 5.2.20924 (Build 20931.1.5.0)
Final Release
RC3 with the following changes
Fixed missing cleartype tab in settings/screen
Voicemail speed dial can be edited and deleted.
Added standard performance tweaks.
WM6.0 Rom for Treo 700wx
Alltel WM6 Rom - (This rom has been updated to include the Alltel OEM.)
Verizon WM6 Rom (Verizon 1.24)
Original WM5 OEM - ROMs
Alltel - WM5 OEM (Stock) ROM
Kitchens
NightRaven's Treo 700wx WM6.1 Kitchen
Download the OEM package for your carrier. Extract it, and place the OEM folder in the kitchen
Alltel/Bell/Telus OEM
Verizon OEM
Sprint OEM
NightRaven's Treo 700wx WM6 Kitchen
Instructions for updating ROM
Format SD Card as FAT32.
Copy Rom image (NapaBoth.nb0) to SD card.
Remove Battery from phone, and unplug the power cord.
Reinsert battery while holding the up volume button on the side of the phone.
Follow on screen prompts.
Once the update starts, plug in your power cord. You don't want the battery to go dead while updating.
Wait for approximately 20 minutes for the update to complete.
Misc. Applications
Palm Threaded SMS
(NOTE: This install removes the default text messaging notification in order to prevent duplicate notifications.)
Phone Service 2.0 (Fixes out of memory error.)
Restore Original Text Message Notification (After uninstalling Palm Threaded SMS. You will probably never need this.)
Windows Live Mobile with Messenger
What is it that you need help with? I have a 700wx and would love wm6.1, however, what would be the advantage of flashing to 6.1? and is there an unlocker available for the 700wx?
sracercelica said:
What is it that you need help with? I have a 700wx and would love wm6.1, however, what would be the advantage of flashing to 6.1? and is there an unlocker available for the 700wx?
Click to expand...
Click to collapse
I'm very new to all of this, so I'm not really sure what the unlocker would be for. There is a way to load custom roms. It's extremely easy. I would like to get the 6.1 rom I have for the 750 on the 700wx, because I want the threaded sms embedded in the rom, and I would also like to get EVDO working correctly. I believe EDVO is not working correctly because of the verizon update. At the very least, I need a way to get it out of the current wm6 rom.
I have been able to add and remove files from the wm6 rom for the 700wx, but I am unable to dump it without errors. I have tried removing all of the files in the rom, and adding the files from the 750 6.1 rom. The rom will flash fine, but then 700wx sits at the bootloader. When I run nbinfo on the 750 rom it shows that it has a boot sector, but the wm6 rom for the 700wx does not.
Like I said, I'm very new to this. My progress so far has been trial and error.
NightRaven said:
I am currently trying to create a WM6.1 rom for the Treo 700wx. I have a working WM6 rom running now. However, there is an issue with EVDO not reconnecting after a disconnect. You have to soft reset the device for it to connect again. It will then run fine until EVDO times out, or you loose signal. I know verizon bastardized there EVDO implementation, and had to release a patch to correct there EVDO issue. I believe this patch was added to this rom, and is causing problems if you are running on another carrier. I'm running on alltel.
I am hoping an unbranded 6.1 rom will correct the issue. However, I am having trouble getting the 6.1 rom to boot after it has been flashed. I will give the 6.0 rom for the Treo 700wx to anyone willing to help. It runs much better than the stock rom.
Click to expand...
Click to collapse
Would a dumped 750 treo 6.1 ROM help? I have not started messing my with 700wx yet but I do have a 750 and I can throw 6.1 on it fast.
asbestos said:
Would a dumped 750 treo 6.1 ROM help? I have not started messing my with 700wx yet but I do have a 750 and I can throw 6.1 on it fast.
Click to expand...
Click to collapse
I have a 6.1 rom and I'm able to get it to dump. I just can't figure out how to get it ported over to the 700wx.
Before you can flash custom roms to a phone you need to be able to unlock it. Thats why I asked if there was an unlocker for the 700wx, as far as I know there isnt one. I have been searching for one and havent found one as of yet.
sracercelica said:
Before you can flash custom roms to a phone you need to be able to unlock it. Thats why I asked if there was an unlocker for the 700wx, as far as I know there isnt one. I have been searching for one and havent found one as of yet.
Click to expand...
Click to collapse
The link in my first post is a custom wm6 rom. I was able to successfully flash it to my 700wx. It runs well with the exception of the intermittent evdo issue. All I had to do to flash it, was format my sd card as fat32. Copy the file to the sd card. Take the battery out of the phone. Reinsert the battery while holding the up volume key. The phone displays press up to update rom. Press up on the direction control. The phone will display checking sd card. Then it will show a screen with a progress bar that says downloading rm + bl or something to that effect. After the progress bar hit 100% the phone reboots, and you are running wm6. I never had to unlock my phone. I have confirmed that it works for Alltel, Sprint, Verizon, and Bell 700wx's. I would be really suprised if it didn't work for all of them.
NightRaven:
Interesting stuff. I'm going to have to DL it and take a look.
Couple of questions.
What AKU is this?
Does this have the Palm branded tweaks (IE: threaded messaging)?
Does this have SDHC support?
Where'd you get this ROM? (I suspect I know from where...or maybe I should say from who... )
You might also want to check out what we're doing over on TreoCentral. We have a WM6 ROM that seems to be working okay. I haven't used it a lot as I personally prefer the speed of WM5, but I'll probably start playing with it more at some point.
http://discussion.treocentral.com/showthread.php?t=164457
NightRaven:
thanks so much for this Rom it works just fine on my Sprint Treo700wx.
the only problem is it always says "digital roaming".. how can i change it to sprint?
zali
zali said:
NightRaven:
thanks so much for this Rom it works just fine on my Sprint Treo700wx.
the only problem is it always says "digital roaming".. how can i change it to sprint?
zali
Click to expand...
Click to collapse
Not really sure. Does Sprint have the *228 option to activate a phone or update the PRL? That might help... You could also try one of the other options in Settings/Phone/Services tab/network.
zali said:
NightRaven:
thanks so much for this Rom it works just fine on my Sprint Treo700wx.
the only problem is it always says "digital roaming".. how can i change it to sprint?
zali
Click to expand...
Click to collapse
How did you flash?
I haven't used this ROM yet, but I've used another WM6 Verizonized ROM, and had no problems with my Sprint Treo 700wx.
The WM6 ROM posted seems to be working great on my Sprint Treo 700WX. I flashed using the instructions provided in this thread. I've added the SDHC patch and am now running a 16 GB Treo 700wx!! I'm not getting the digital roaming message, indicated earlier in this thread and everything seems to be working the way it should.
whydidnt said:
The WM6 ROM posted seems to be working great on my Sprint Treo 700WX. I flashed using the instructions provided in this thread. I've added the SDHC patch and am now running a 16 GB Treo 700wx!! I'm not getting the digital roaming message, indicated earlier in this thread and everything seems to be working the way it should.
Click to expand...
Click to collapse
If you PM me with a link to the SDHC patch, I'll build it into the ROM.
I added an Alltel Branded ROM link to my first posting.
Any luck with the EVDO issues?
NightRaven said:
If you PM me with a link to the SDHC patch, I'll build it into the ROM.
Click to expand...
Click to collapse
The file is in this thread:
http://forum.xda-developers.com/showthread.php?t=344338&page=28
it's in message # 272. Thanks for your work with this!
thehotrod11 said:
Any luck with the EVDO issues?
Click to expand...
Click to collapse
they are still there. not bad just a little annoying. I'm hoping they won't be a problem when I get my 6.1 rom working.
zali said:
NightRaven:
thanks so much for this Rom it works just fine on my Sprint Treo700wx.
the only problem is it always says "digital roaming".. how can i change it to sprint?
zali
Click to expand...
Click to collapse
I'm having the same problem. I flashed with WM6 and my phone no longer would connect to a Sprint tower, always on Digital Roaming. Also, under Settings > Phone > Services > Network I only had 3 options. Home, which got no signal at all. And two with the same name (I don't remember what it was now) but with A and B at the end, both of which would only do Digital Roaming.
So, I flashed back to ebag's Final ROM (http://discussion.treocentral.com/showthread.php?t=164457) and now my Services > Network options are back to normal, but the Home Network Only gets no signal while the other two are Digital Roaming all the time.
Can anybody help with this? I've tried calling Sprint and updating the PRL, I'm at 20229 right now, but no help. Somebody else suggested I needed to reprogram my MSID and SID, but the MSID is still correct and Sprint says they never put anything in the SID part.
I don't know what else to do now. I'm gonna try real quick to flash back to the Stock ROM, see if that helps.
I'm open to any suggestions now. I've been 2 days stuck on 1xRTT and it's killing me .
I'm using the Alltel branded ROM and it seems to be working fine. I think there might be a little more battery drain than I am used to but that is ok. The ROM is certainly faster that the stock 700wx ROM. I have yet to put many programs back on it but the apps i have installed are working flawlessly (SPB Time, Phone Suite, Mobile Shell, Pocket RAR, Pocket Music, and WMTorrent). The MMS doesnt seem to be working though. I'm not sure if i just need to apply Alltel's settings or what. The fact that MMS is not working is not too upsetting as Alltel phone's have never had it to begin with anyway. Truth be told, it is an excellent port of the popular WM6 OS! Great Job!!!! I would just like to note that EVDO is working perfectly.
barrowbl said:
I'm using the Alltel branded ROM and it seems to be working fine. I think there might be a little more battery drain than I am used to but that is ok. The ROM is certainly faster that the stock 700wx ROM. I have yet to put many programs back on it but the apps i have installed are working flawlessly (SPB Time, Phone Suite, Mobile Shell, Pocket RAR, Pocket Music, and WMTorrent). The MMS doesnt seem to be working though. I'm not sure if i just need to apply Alltel's settings or what. The fact that MMS is not working is not too upsetting as Alltel phone's have never had it to begin with anyway. Truth be told, it is an excellent port of the popular WM6 OS! Great Job!!!! I would just like to note that EVDO is working perfectly.
Click to expand...
Click to collapse
I am still tring to find where the MMS settings are stored in this ROM. I'm sure they just need to be updated, but I have been unable to locate them.
I was thinking of posting one or two ROMs for this device to add some variety.
Does anyone have any requests?
I think most of people want a stripped down no frills kind of system. I used Dark's Roms for a little while but started having problems with it locking up and not receiving calls. I think if you can clean up the stock and maybe give it a face lift, well, I don't know about anyone else, but Id like that. Getting tired of the plan ol interface.
Any chance of you posting the OEMmiscs as well so that any of us who want to cook our own SYS builds can do it?
Perhaps a stripped down rom with any useful additions from the v7 Fathom rom (fathom keyboard, dialer, anything else you find worthwhile to add)?
Is there any chance to bring over the Sense 2.5?
I like the program, even though i don't have a HTC.
windows mobile 6.1?
OK, say maybe a couple of "clean" ROMs based on WM 6.1, 6.5 & 6.5.3?
I'm personally not that interested spending a lot of time porting HTC software, like Sense.
I have no problem posting my Kitchen and source files.
TrueG
Sounds good! Looking forward to the release!
He question is asked!!!
and then, nothing more has happened!!!
- made the survey and who likes what,
or have lost your phone or computer
and they said that they had gone to study
and such a thing happened in many applications and many ROMs
winmospeed
topaz rom
xperia rom
Avian Pleyer
and so on and so forth
In any case regards
Have no fear, I'm still here.
Right now I am trying to correct an issue with DZCreate.exe that is preventing me from using v10g as a base. The DragonStorm ROMs appear to be based on v10d (AT&T) with the OEMMisc from v10g.
trueg said:
Have no fear, I'm still here.
Right now I am trying to correct an issue with DZCreate.exe that is preventing me from using v10g as a base. The DragonStorm ROMs appear to be based on v10d (AT&T) with the OEMMisc from v10g.
Click to expand...
Click to collapse
Thanks trueg. you are my best bud.
To be honest, I am really happy with stock AT&T April 2010. (I cannot believe I put up with HTC for 2 years).
I think the first step would be simply removing AT&T Media Net and other AT&T applications, so the ROM would be quick but still stable.
I would even leave many of the LG applications there, because the music player and scientific calculator get the job done, better than some of the cooked ROMs I tried when using HTC.
It is good that you're there yet "man.
You're the only one who stayed bulid the ROMs.
As almost all ROMS from Dark9781, links are dead.
To try the latest ROM do a normal clean version for everyday use, to be able to serve with the device.
All possible ROMs I tried and all use more memory than the official ROM.
Request is then
start top left because all the programs written for it.
thenks
bluetooth AVRCP
I'd love to have Coreplayer recognize avrcp commands so that I can abandon the lame windows media player an dlisten to flacs.
I use the Snapdragon hardware accelerated version of Coreplayer on my own device, but I can't include that in a ROM; Coreplayer is commercial software.
In that I am not sure.
Well TitaniumUI is included in Windows Mobile 6.5+ by default. It doesn't take up any RAM if you don't use it. Simply go to \Settings\Today\Items and uncheck Windows Default.
If you install, this and only this HTC taskmanager.
Because it always works flawlessly
htc_task_2.1.cab
link
http://forum.xda-developers.com/showpost.php?p=4924380&postcount=1
And then this program:
MMAppLauncher v1.0.CAB
link
http://forum.xda-developers.com/showthread.php?t=795393
start with windows
override start meny
You get 7-10 mb free memory.
The biggest problem is that this program was never completed and make a shortcut for the camera so that you can not start the camera without problems.
Well I have great news.
I have been able to figure out how to build ROMs using the newer style ROMs from LG.
This means that I can use the OEMDrivers from the GW825V and GW820_V10g.
It also means I can build ROMs for the GW825V.
I'm just working on a test ROM that I can post to see if it works for everyone.
Of course that it appears to try as soon as possible.
Because this is a totally useless device!
On t-mobile, can not even mms!!
Has little to, no longer working link to dragonstorm roms.
All the other ones are full of bugs, or use lots of memory to
slow machine.
ROM from AT & T has too many programs that no one will ever use.
So a nice little handy device and fast or should be.
When with task manager FdcSoft v3.3 stop all unnecessary processes, it works most quickly as well as HD2.
Only GAPI drivers are slow as the HTC Wizard or worse.
example:
GAPIBench 1.5-arm on the float test Topaz 1.6800
On the IQ 0.6900
Very gladly start up left.
Because lots and lots of programs simply will not work otherwise inc beautiful program Total Commander.
great news trueg. Look forward to testing it out!
OK, here is the first test.
I'm not sure in what format you guys want these distributed.
I simply zipped up my LGMOBILEAX folder and uploaded it to MediaFire.
http://www.mediafire.com/file/ibkzdxnlp5h8umu/LG_Monaco_Test01.zip
In Windows XP, you would simply extract this to
C:\Documents and Settings\All Users\Application Data\
For Windows 7, extract here...
C:\Users\All Users\
I use 7-zip...
http://www.7-zip.org/
Then run
C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\SmartPhoneSetup\SP_Starter.exe
If you are running a stock ROM, the application should automatically reboot your phone into emergency mode and start flashing.
If it doesn't (gives error that it can't detect phone), you will need to reset your phone manually and hold down the space button on the keyboard to enter emergency mode.
This ROM should work on GW820, GW825 and GW825V (all LG Monaco devices).
The OEMDrivers are based off of the GW825V. The rest is almost directly from GW820_v10g (AT&T).
Since this is just a test I didn't make many changes.
Please let me know if this works and if there are any problems.
If it works, I will use this as a base for the 6.5 ROM.
The reason I used the GW825V OEMDrivers is because it provides more RAM and storage (take a look at the Memory).
TrueG
Downloading it now...
What sys build is this based on?