Need the help - JASJAR, XDA Exec, MDA Pro Software Upgrading

I have qtek 9000 wm5 german and want to get rid of it and change for new rom. it is sim unlocked and i followed the ruled for cid ulocking.
I followed this thread http://forum.xda-developers.com/showthread.php?t=285435 but have problems with Button's 1.05 ROM which is not able to set up connection with my device. I dont know why. Also I cant read my ipl spl numbers while rebooting. In the end to add that I have swisscom rom.
Thanks a lot for any help

Attilahaan said:
I have qtek 9000 wm5 german and want to get rid of it and change for new rom. it is sim unlocked and i followed the ruled for cid ulocking.
I followed this thread http://forum.xda-developers.com/showthread.php?t=285435 but have problems with Button's 1.05 ROM which is not able to set up connection with my device. I dont know why. Also I cant read my ipl spl numbers while rebooting. In the end to add that I have swisscom rom.
Thanks a lot for any help
Click to expand...
Click to collapse
Welcome to the forum, please READ the Wiki

New problem - phone off
Ive upgraded rom to tomal wm6.1. Everything works except it cant recognize sim card any more. I would be grateful for advice cause I am affraid not to brick device experimenting.

Attilahaan said:
Ive upgraded rom to tomal wm6.1. Everything works except it cant recognize sim card any more. I would be grateful for advice cause I am affraid not to brick device experimenting.
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=266758
Hope it helps

Help, Its stuckedddddd
I tried ti unlock sim following all instructions very carefully but now its stucked in bootloader mode. When I plug in usb only sign "serial" become "usb"
What to do now? Im very affraid that device is damaged ((
...I recovered the device with a lot of effort but phone function doesnt work again.
THX

Related

xda1 pw10b1 hangs at startup

hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance
Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent
You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.
You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.
my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members
hi
if someone want to know how i successfuly repaired it u can ask me
RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09
RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.
What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx
After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks

Please HELP! Newbie

Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
AppleCake said:
Hi All
I have a T-Mobile MDA Vario and have unlocked it so I could use my O2 sim card. However even when I set my GPRS settings for O2 I still cannot connect. Is there something else I have to do to allow my o2 sim to use GPRS?
I really would appreciate the help guy's
Thanks in advance
Apple
Ok can I ask where I can get an O2 Rom from? I have looked everywhere and I can seem to find it. I would really appreciate it.
Click to expand...
Click to collapse
you can find the ROMs at the XDA FTP site. Here is the link to a tutorial on how to connect to the FTP site :
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
You will find the O2 ROM there.
Cheers!
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Re: Cheers!
AppleCake said:
Hi Jorgee
Thank you so much for the info.
I dont mean to be a pain, but is there any instruction for installing a new ROM? I have used the unlocker to unlock both SIM and CID already so do I just hit the .exe file and run it?
Thanks again
Apple
Click to expand...
Click to collapse
Sorry, but I have a Universal and never had my hands on a MDA Vario. But for me to upgrade my Universal, I just run the ROM update IF it is the same ROM brand. If it is not same brand, meaning a T-Mobile ROM to O2 ROM, I don't know how to doit for the MDA Vario . Sorry
If i was you i would just do a rom update. To do so click here -> ftp://xda:[email protected]/Wizard/Roms/Qtek . Download RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Then click on that -> http://forum.xda-developers.com/viewtopic.php?t=33796 sign up and download lokiwiz - HTC Wizard Unlocker v0.2b from the first post. Unrar the file. Copy Enablerapi.cab to ya phone and run it and wait for it to finish. Then make sure ya phone IS connected to ya pc via active sync and Run Lokiwiz.bat ON YA PC. Type c then press enter. Ya phone should then soft restart. Ya phone is now unlocked. Again make sure ya phone is connected via active sync run File: RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test.exe. Follow the instructions and DONT unplug ya phone.
By the way be carefull when updating rom, as if it is not done correctly ya could bugger ya phone up!
If after your keyboard layout is incorrect go here -> http://forum.xda-developers.com/viewtopic.php?t=39725 and download reg wizard.
As for GPRS setting i only know the settings for o2 sorry.

WM6 on Qtek (htc) S200

Hello everybody.
I am trying to update my phone, with WM6.0, however I am getting a country id error. The version I got for testing reasons is WWE. My IMEI is 35703600732450***
Could anyone help me, how am I suppose to achieve that?
there are flashtools with noID.exe in the end which dont
fail on country id errors
try looking for your device at buzzdev.net
Thanx Rudegar
However, I have an unlocked device. I unlocked it throud imei-chek.co.uk paid service. Will this help, or I still have to use a noID.exe?
If you have your device unlocked than that error shouldnt occur. However if you still get it then its inevitable i'd say to use the noID RUU.
my himalaya was never sim locked
but if i try to flash it using HimaUpgradeUt.exe i get
that error
when i flash it using HimaUpgradeUt_noID.exe
i dont
the noID at least in my case have to do with operator settings
not simlocks and the likes
if the rom dont know the operator code it will give that error
Ok, thanx. I got the files from here http://forum.xda-developers.com/showthread.php?p=1361468#post1361468 and everything worked fine (except that Thai keyboard...)

cid lock new 621 stuck in bootloader mode

Last two days I have read all the threats in this forum for my problem but I couldnt find any solutions.
I bought my unlock s621 from compusa about a month ago and I have tryed to upgrade it two days ago. Duiring the upgrade proces when scale %3 it stoped to active sync connection.
Later I learned from this forum that this happened because I had to cid unlock before upgrade but I didnt know this before ) I chrashed original wm 6 rom.
Then I read all about treats which about this issue. I opened phone in three color bootloader mode with pushing camera buton.
I have try to learn my cid id like what write here http://forum.xda-developers.com/showthread.php?t=379318
My phone didnt give the cid id with this method and I have tryed this one and http://forum.xda-developers.com/showthread.php?t=379622 this one didnt help. I used several windows computers and many times.
I have tryed to install all official roms in here http://forum.xda-developers.com/showthread.php?t=381726 but non of them help. All going to %3 and then say wrong id error 270 or 262 etc.
I learned that there is no way to unlock cid under bootloader mode I have to find original official rom which device has before.
I can't learn cid id so I dont know what was before.
Just I know when I was do hard reset to old wm6 rom was starting spanish.
Questions;
1. Anyone know that which rom can recover this phone?
2. Is there any way to cid unlock it in bootloader mode which I didnt find it.?
Thank you.
(Sory for my english)
No one knows any official Rom for this phone?
Please read the Wiki
And here you find the cid unlocker
http://forum.xda-developers.com/showthread.php?t=415225
Good luck,
orb3000 Thank you for replay I have read all wiki but my device has turned to three color mode after first errror 270.
As I learned that device is not connect to activesync in three color mode. SDA and USPL- CID BYPASS unlockers are need actvesync for connect and unlock to device. Or device need original rom which what was before for live and connect to activesync and unlock.
Do you have any idea connect device to activesync in bootloader mode?
Thank you
As I understand I need this rom
"1.30.515.1" spanish, sould be like that;
"RUU_Excalibur_BRIGHTSTAR_PTB_1.30.515.1_4.1.13.47_02.98.90_Ship.exe "
Anyone knows where can I found this?
Please help I need this spanish official 1.30.515.1 rom.
zonder said:
Please help I need this spanish official 1.30.515.1 rom.
Click to expand...
Click to collapse
There is only the official rom below:
http://rapidshare.com/files/52505401/HTC_S620_SPA_1.27.412.1_4.1.13.44_02.94.90_Ship.exe
Good luck !
jhwo99's thank you but I traid before this. It says not valid model.
zonder said:
jhwo99's thank you but I traid before this. It says not valid model.
Click to expand...
Click to collapse
Try this..
Thanks again but SDA needs activesync for connect to device but mine is stuck in bootloader and activesync is not working under bootloader.
zonder said:
Thanks again but SDA needs activesync for connect to device but mine is stuck in bootloader and activesync is not working under bootloader.
Click to expand...
Click to collapse
You can install a Official rom.
After unlock your phone.
wat difference of flashing to other radio? jus curious
jhwo99 Yes I know but I can not unlock with anyway under bootloader mode. Do you have any idea?
zonder said:
jhwo99 Yes I know but I can not unlock with anyway under bootloader mode. Do you have any idea?
Click to expand...
Click to collapse
Connect your phone to your PC, while he is in thebootloader and flash it with a official rom.
You don't need to connect with active sync.
jhwo99 thanks again but non of the official roms are working for my device. (I treid all official roms from this site)
I wrote htc and they said according to serial number my device came from spain I treid last official spanish rom many times with different computer but it comes just %3 then turnoff. It gives wrong ID or something like that.
Even I tried change rom version other than to 1.30.515.1 (This is the my device rom version which I tought)
I did it with some of rom cook tools (By the way I get more knowlage how to rom cook) But this time it gives error again not wrong ID but something different.
So I am looking for official spanish 1.30.515.1 rom or tool for unlock cid under boot loader without activesync.
zonder said:
jhwo99 thanks again but non of the official roms are working for my device. (I treid all official roms from this site)
I wrote htc and they said according to serial number my device came from spain I treid last official spanish rom many times with different computer but it comes just %3 then turnoff. It gives wrong ID or something like that.
Even I tried change rom version other than to 1.30.515.1 (This is the my device rom version which I tought)
I did it with some of rom cook tools (By the way I get more knowlage how to rom cook) But this time it gives error again not wrong ID but something different.
When you take out the battery, did he start up normal ?
So I am looking for official spanish 1.30.515.1 rom or tool for unlock cid under boot loader without activesync.
Click to expand...
Click to collapse
When you take out the battery, did he start up normal ?
If I connect with usb cable in press and hold camera button with battery or without battery it is working in bootloader three color screen. Not normal startup any way.
By the way I learned someone real rom version;
Rom version: 1.38.476.1
Radio version: 4.1.13.59_0315.90
I need this original spanish rom now.
zonder said:
If I connect with usb cable in press and hold camera button with battery or without battery it is working in bootloader three color screen. Not normal startup any way.
By the way I learned someone real rom version;
Rom version: 1.38.476.1
Radio version: 4.1.13.59_0315.90
I need this original spanish rom now.
Click to expand...
Click to collapse
Don't connect your phone with USB cable to your PC and take out the battery.
Put it back and your phone restart.
zonder said:
If I connect with usb cable in press and hold camera button with battery or without battery it is working in bootloader three color screen. Not normal startup any way.
By the way I learned someone real rom version;
Rom version: 1.38.476.1
Radio version: 4.1.13.59_0315.90
I need this original spanish rom now.
Click to expand...
Click to collapse
are you sure about the Rom and Radio version ?
It is the newest I have seen !
When did you buy your phone ?
Just a month ago one of my friends buy it from US for me and himself I have got versions from his device.

Original Bootloader for 3600 ?

Hello together,
i beacme a new vodafone compact gps from vodafone businnes because the phone button is damaged. No i have the original vodafone software to flash back but after this, the bootloader is still from olipro :-(
Can anyone tell me where i can find the original bootloader to flash?
i have found it.
sure you dont need to share it...
but it would be appreciated by everyone who ever needs it...
sorry,
i use this thread to solve the problem:
http://forum.xda-developers.com/showthread.php?t=293632

Categories

Resources