Develop Bugs

xda1 pw10b1 hangs at startup

hi i have xda1 with t-mobile
it only shows t-mobile and hangs there
it shows
t-mobile
4.01.19
which rom should i use and what is the method to write that rom
Thanx in advance

Normally you should see ROM Version (in you case 4.01.19) and also 2 other Version. But I´m sure, you do not see this numbers....
I think you have flashed the wrong radiostack to your device and now you have GSM Error when you enter the bootloader....
Try this instructions:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan

any thing else
i ve downloaded the same rom version on my phone but still it hangs at the startup with showing
3.17.03
with no radio versions and etc.
The phone was fell down from me and it started the problem from same time.
plz give me solution it is very urgent

You may have damaged some internal component when you dropped the phone. Are you pushing resetting the phone after flashing, by pushing once in the hole under the headset socket then wait one minute and push once more.

You are saying that you have ROM version 4.01.19
If I remember correctly that ROM version can only be unlocked using the SD card method. Is it possible that somebody tried to unlock it and screwed it up?
Either way it sounds like you need a new main board for it.

my phone is finally ok with some problems
i ve successfully made my mobile in working condition by some technical methods but i still have some problems with its software. from where i can get the exact radio stack for being used here in Pakistan. is it wants auto configuration but my operator and country is not listed in that menu.
3.17.03 ENG
6.24.00
324e4
which radio stack i must install and from where i can get it?
Thanks in advance to all members

hi
if someone want to know how i successfuly repaired it u can ask me

RE: my phone is finally ok with some problems
I just shipped an SX56 to a customer in Karachi, Pakistan and he is apparently happy with it.
It was upgraded with this file: sx56_WM2003_update.exe
G1.3.3
RA.33.02
A.30.09

RE: my phone is finally ok with some problems
Forgot to mention it, that file also upgrade the radio stack.

What abt my regional settings
Thanx but cud u plz tell me how can i get logon with my sim card coz my phone is not giving signals ? it wants some kind of customization process but my country's network is not listed in it
Thankx

After trying to upgrade radio stack to version 4.24.20
i just tried to upgrade my radio stack to above mentioned version. Now i m gettin an error message that says "cant upgrade rsu prss ok to restart" it comes again and again. rsu upgrading was done first time with no errors but soon after it,it start giving me that message and in the startup screen it shows the previous version of radio stack which was 6.24.00. Plz tell me what is wrong that i did and how to resolve that trouble?
Thanks

stalling HTC3300 T-mobile

I have runed the rom update fromArtemis Windows Mobile 6 NLD (Dutch) with UpgradeRom.bat.
after some time i got a connection error and the divice restarted but now stays in its Loading screen(with the rom information)
what has happend?
and how can i repair it?

can't get a SD flash also, how dou you stay in the SD flash screen mine pops direct to te multicolor screen

Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck

Neozzz said:
Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck
Click to expand...
Click to collapse
i can get in the bootscreen and tried flashing with a SD card but get a certificate issue. I don't know what ROM i must take to get it flashed by SD.

i'm trining to get it flashed back but the SD flash displays every time "Invalid Certificate" tried several NBH files.
also tried a repair form http://forum.xda-developers.com/showthread.php?t=308242
but it saids error 244 invaild model ID
need some help.

same problem twice but easily solved
Neozzz said:
Jo, you're also from the Netherlands. You also got the REPPLOG.EXE error? I have the same problem. The device is stuck at the booting screen. you have two options: 1 => send it to HTC or 2 => wait for official Dutch HTC P3300 WM 6 rom update. Oh, btw, it's crucial that you can enter bootloader mode ( voice button + soft reset, and keep holding the voice button all the time ), or else you won't be able to update the device with WM6. If you made any progress please let me know! I'm just gonna wait for HTC....
Good luck
Click to expand...
Click to collapse
had the same problem twice but easily solved with putting the device in usb mode (record+reset while holding record) and starting the orginal German WM6 install package from O2. Now it's German offcourse but i did installing the Dutch custom rom again (wait about 1 houer, wait only half ouer waas't finishd here!) after loading dutch rom reset with holding the 2 softbuttons, at question press greencall button.

hashname said:
had the same problem twice but easily solved with putting the device in usb mode (record+reset while holding record) and starting the orginal German WM6 install package from O2. Now it's German offcourse but i did installing the Dutch custom rom again (wait about 1 houer, wait only half ouer waas't finishd here!) after loading dutch rom reset with holding the 2 softbuttons, at question press greencall button.
Click to expand...
Click to collapse
But is your device also CID locked?

cid locked
Neozzz said:
But is your device also CID locked?
Click to expand...
Click to collapse
Nevver talked about CID locked device. Mine is't CID locked, don't take that risk for less than 30 euro.

OMG u can update it on CID locked p3300

I bricked my T-Mobile MDA C3 NL trying to upgrade to the wwe version, it actually is CID-locked, so i knew it could go wrong.
My question is if anyone can supply me with the dutch t-mobile rom for this device, i tried flashing it with the german and the uk versions, but it gives me INVALID ID error after a few seconds in the flashing process.
I can get in to the bootloader using the voicekey+reset option.
Anyone who knows a solution to this problem?

As far as I know, there's no Dutch T-Mobile Rom avaible on the internet. I'm afraid that you have to wait untill T-Mobile NL releases a WM6 Rom. Or you could contact the customerservice (or T-Mobile shop) to get it repaired. As long as you didn't CID-unlock your device you still have your guarantee. T-Mobile will fix it for you cost free and pretty quick. I have send my MDA Compact III 2 times already and had it back in 4 days.

Can't wait for that long, so i called my insurance company. will have a temp phone here in under 4 hours.
Let's hope i'll have my CIII back in a few days, think i'll CID unlock it before trying an upgrade this time
lekkere nederlandse thread hiero

I have got my bricked T-Mobile Compact 3 back form repair.
i had CID-unlocked it, had no problem with my guarantee.
now i will wait a week or 2 on the T-mobile germany or maby The Netherlands.
As i have read @ http://forum.xda-developers.com/showthread.php?t=308164
i will juse this methode.
http://www.voipsec.eu/?p=92
still no official T-Mobile Rom.

Need the help

I have qtek 9000 wm5 german and want to get rid of it and change for new rom. it is sim unlocked and i followed the ruled for cid ulocking.
I followed this thread http://forum.xda-developers.com/showthread.php?t=285435 but have problems with Button's 1.05 ROM which is not able to set up connection with my device. I dont know why. Also I cant read my ipl spl numbers while rebooting. In the end to add that I have swisscom rom.
Thanks a lot for any help

Attilahaan said:
I have qtek 9000 wm5 german and want to get rid of it and change for new rom. it is sim unlocked and i followed the ruled for cid ulocking.
I followed this thread http://forum.xda-developers.com/showthread.php?t=285435 but have problems with Button's 1.05 ROM which is not able to set up connection with my device. I dont know why. Also I cant read my ipl spl numbers while rebooting. In the end to add that I have swisscom rom.
Thanks a lot for any help
Click to expand...
Click to collapse
Welcome to the forum, please READ the Wiki

New problem - phone off
Ive upgraded rom to tomal wm6.1. Everything works except it cant recognize sim card any more. I would be grateful for advice cause I am affraid not to brick device experimenting.

Attilahaan said:
Ive upgraded rom to tomal wm6.1. Everything works except it cant recognize sim card any more. I would be grateful for advice cause I am affraid not to brick device experimenting.
Click to expand...
Click to collapse
Check here: http://forum.xda-developers.com/showthread.php?t=266758
Hope it helps

Help, Its stuckedddddd
I tried ti unlock sim following all instructions very carefully but now its stucked in bootloader mode. When I plug in usb only sign "serial" become "usb"
What to do now? Im very affraid that device is damaged ((
...I recovered the device with a lot of effort but phone function doesnt work again.
THX

ATT Tilt 2, won't force update rom :(

Hi all,
I'm trying to put a new rom on the ATT tilt2 that comes out tomorrow, but whatever I do nothing seems to work. I ran the cab for hardSPL and everytime I try to update the rom the phone disconnects from USB. As soon as I get the status bar upgrade on the rom from hardspl on the phone and PC it freezes. Then it disconnects from WMC and I have to take the battery out. Am I doing something wrong?

Well, if you ran a cab for hardSPL you did something wrong and your phone isn't unlocked.

oddcrap said:
Hi all,
I'm trying to put a new rom on the ATT tilt2 that comes out tomorrow, but whatever I do nothing seems to work. I ran the cab for hardSPL and everytime I try to update the rom the phone disconnects from USB. As soon as I get the status bar upgrade on the rom from hardspl on the phone and PC it freezes. Then it disconnects from WMC and I have to take the battery out. Am I doing something wrong?
Click to expand...
Click to collapse
you can call ATT and get an unlock code then you can HSPL, or you can go here: and buy your unlock code and it will install HSPL at the same time

alwayslearning said:
you can call ATT and get an unlock code then you can HSPL, or you can go here: and buy your unlock code and it will install HSPL at the same time
Click to expand...
Click to collapse
Exactly, you need to do something other than run a cab.

alwayslearning said:
you can call ATT and get an unlock code then you can HSPL, or you can go here: and buy your unlock code and it will install HSPL at the same time
Click to expand...
Click to collapse
Alright, so I get the unlock code and run the installer for HSPL after the unlock?
EDIT: I already put the cab on the phone.

oddcrap said:
Alright, so I get the unlock code and run the installer for HSPL after the unlock?
EDIT: I already put the cab on the phone.
Click to expand...
Click to collapse
Dude, are you not reading? THERE IS NO CAB FOR HARDSPL! It is an application that you run from your PC that replaces your phones bootloader. Go to the thread that alwayslearning posted and buy their program, or go here and use that HSPL.

you do not have to have the phone unlocked to use hardSPL on it.unlocking the phone is only needed if you want to use it with another phone carrier

frustrationnnn...
I understand how you have to install the hard spl on the phone before flashing the rom, but I'm also having trouble installing the hard spl. I am trying to install the rhodium hard spl. it says that I should retry after syncing the device everytime I run the program on automatic flash. (meaning the program does not recognize the device?) but....when I check the windows mobile device center, it says it is connected.... stuck.
And after installing the hard spl, I should be able to flash the new rom onto the device right?

goldiemypal said:
I understand how you have to install the hard spl on the phone before flashing the rom, but I'm also having trouble installing the hard spl. I am trying to install the rhodium hard spl. it says that I should retry after syncing the device everytime I run the program on automatic flash. (meaning the program does not recognize the device?) but....when I check the windows mobile device center, it says it is connected.... stuck.
And after installing the hard spl, I should be able to flash the new rom onto the device right?
Click to expand...
Click to collapse
Having the exact same problem on Windows Vista 64 bit. I wish someone would come out and tell us a work around this one.

noggind614 said:
you do not have to have the phone unlocked to use hardSPL on it.unlocking the phone is only needed if you want to use it with another phone carrier
Click to expand...
Click to collapse
Exactly. Calling ATT to get the unlock code is for the SIM lock. HardSPL unlocks the SPL, which restricts the phone from being able to flash any non-ATT ROMs.
Totally different things.

Unable to start wi-fi

Just had system update notifier, so I installed it (am now on build no: 1.21.405.2 CL174215) and am unable to start wi-fi or bluetooth?
Could it be anything to do with this being an orange handset that I have de-branded?

Same problem after update, but bluetooths works, but get messege unable to start WIFI
anyideas ?

I've got this issue too. Debranded T-Mobile device.

hi everyone !
same problem for me, french Desire Orange unbranded ...
only WiFi does not work. Bluetooth seems ok.

hi all, I think we all are in the same boat, it appeared that only debranded phones are affected. mine debranded T-Mobile as well. damn, I was so happy when I saw an OTA update at the first time. who could expect it will kill my wi-fi. however, I've seen guys on another forum that the problem is solved if you reload the full ROM from the beginning, even 1.21 works great. I've just downloaded one from this thread, going to install now and see. the problem is that you have to back up everything because it will kill all data on your phone. personally I'm not going to backup as there's not much to loose there for me and I wish to have a very clean install. cheers!

Same problem here with french Orange de-branded and not rooted ....
I'm going to try a radio upgrade, it could handle the problem, but it seems that newest radios sim lock Orange phones

Same problem with my debranded T-Mobile Desire. Can't flash the original RUU I found here in this forum. My desire starts and hangs at the black screen showing the HTC Logo but did not continue flashing the rom. By unplugging the USB Cable the bootloader appears and show 0.75. I thought it must show 0.80 ? Any ideas how to flash the rom that brings back my WLAN?

For anyone experiencing Wi-Fi problems, check out this thread:
http://forum.xda-developers.com/showthread.php?p=6650144#post6650144
I helped another member to get his Wi-Fi connection working after he had upgraded to the latest modified Kernel version by Richard Trip.
Note: Your phone will need to be rooted to apply the kernel flash zip file in recovery mode.
Best Regards,
Mas.

well I'm back up and running but only after buying an unlock code from htccode (Thanks Sudarshan)
Couldn't see a way round it as I'm not rooted but I suppose, although the handset is branded, it's now unlocked and running htc software instead of that sodding orange messed up stuff!

OK I solved the problem with the broken WiFi Connection.
I replaced the ROM with one posted here in this forum.
I just flashed it and after the reboot, i have had the new ROM with a working WiFi Connection.
There is a strange thing that I revognized during the procedure. The ROM with the broken WiFi Link showed me a bootloader version of 0.75, after the flash I got 0.80.
I would be interested if some users have the 0.75 bootloader too even after the update.
Hope I could help some of you guys still having the problem.
Greetz Blackbird

Flash one of the kernels (boot.img) and bcm439.ko. Richard Trip is the only one that has them packaged, so download his and flash via recovery. make sure your wifi is off first.

moselep said:
Same problem after update, but bluetooth works, but get messege unable to start WIFI
anyideas ?
Click to expand...
Click to collapse
Have now updated using the GoldCard methed, now the WiFi working Fine, but now have another problem, the Phone is now saying please enter "Sim Network Unlock PIN"
HELP !!!!

You've to unlock your phone. Go to "htcsimunlock.com", enter your phone modell and your IMEI No. You'll get the requested unlock code but you've to pay for.
Made the same procedure yesterday and it worked fine without unlocking the device. Maybe it's because it won't be nessessary in germany, I don't know.

moselep said:
Have now updated using the GoldCard methed, now the WiFi working Fine, but now have another problem, the Phone is now saying please enter "Sim Network Unlock PIN"
HELP !!!!
Click to expand...
Click to collapse
Sorted, Rang Orange and they gave me Unlock Code, thanks all for your Help

moselep said:
Sorted, Rang Orange and they gave me Unlock Code, thanks all for your Help
Click to expand...
Click to collapse
Hi
Did you need to pay Orange to get the unlock code? I'm in the same position you were in. Unbranded HTC Desire from Orange.
Thanks