Hallo,
first I must say that I never cooked a rom so I'm a Rom-virgine
I want to edit the original 2.03 GER Rom from HTC.
I Installed XBmod Manila Rhodium but after installation there is no free Memory, so I must cook a ROM by myself. TouchFlow3D is the only thing I want to change.
Can anybody give me a link to a tutorial where I can read everything about Rom-Cooking.
I nee a kitchen... which, where I can find?
Which files to edit...
I hope somebody can spend me some minutes to help a nooby ^^
Maybe "erviuskitchen" is good for cooking, i dunno...
BUT I Think you need 2100+ build 4 TF3D working properly.
musste ma gugge obs irgndwo ne anleitung gibt
On my Diamond with cab installation everything works fine.
Where can I get a 2100+ build? I need a GER version.
Go to www.htc-developers.de. It's a German forum and there you can find a kitchen with a 21042 ROM and SYS. But currently the site seems to be down ...
Check this out, it might spare you the cooking - german rom with xbmod manila - http://forum.xda-developers.com/showthread.php?t=497204
Hey, nice to see some people really trying to learn and not only: "can you do it for me?"
Here's the easiest way i found to start cooking, it's a really simple kitchen, with it you can dump any open rom and there's also a great video tutorial:
http://forum.xda-developers.com/showthread.php?t=413782
And here's i nice post by Suiller explaining a little about some Manilla OEM's, what files you will need, etc...
http://forum.xda-developers.com/showpost.php?p=3622406&postcount=2220
Good luck man! If you have problems, just pm-me and i'll do my best!
In the Diamond ROM development section, look up the thread 'noob kitchen'. It's a thread where I and a few others help(ed) each other out to get started to cooking.
I posted a link there with a few packages and my entire ROM kitchen with what I ended up with, including my RhodiumManila packages.
Drop me a note on how to get going _after_ you've done at least a few test cooks and/or reading that thread for a bit .
If you're as far that you can dump the original 2.03 HTC ROM, and remove a few things, recook it and flash it: then you're just a few steps away from adding RhodiumManila to it
Related
Hello People,
I wonder if someone could give a small tutorial how to start cooking your rom, maybe something as easy as putting a NLD wm into a 1.93 stock rom. I have been searching and downloading several kitchens, but nowhere is told how to start or what to need.
I really would like an example or walktrough the basics. I think I want to cook my own roms too, and I know I can bite me into these things ... never a cook too much is there?
I would be interested too. I have seen Kaiser kitchen but I never seen how to remove application from a room or add new one.
Riel said:
Hello People,
I wonder if someone could give a small tutorial how to start cooking your rom, maybe something as easy as putting a NLD wm into a 1.93 stock rom. I have been searching and downloading several kitchens, but nowhere is told how to start or what to need.
I really would like an example or walktrough the basics. I think I want to cook my own roms too, and I know I can bite me into these things ... never a cook too much is there?
Click to expand...
Click to collapse
Please check
http://forum.xda-developers.com/showthread.php?t=413782
there is tutorial with video, if you haven't found it yet
Oh and it was lolek74 who posted the thread, thanks
Call me stupid, but I have searched around ALOT on this forum for an answer to my question but have yet found any relevance to what I am looking for.
I want to start cooking my own Artemis ROM's. As far as I have read the easiest way is by using something called HyperCore kitchen. Now, I've started using this, but have found out afterwards that cooked ROM's available to download on here, cannot be extracted properly so as to be able to make one of them custom for what I want.
And as there is no official WM6.1 ROM for the Artemis, I am at a loss.
Basically, what I am asking to do, is to find out how to port a Kaiser WM6.1 official ROM so that it would be usable on the Artemis. Alternatively, perhaps find out what files are required from the Kaiser ROM to make the official WM6 Artemis ROM into WM6.1.
I hope I haven't confused you all. Any help would be greatly appreciated, maybe from bepe, tom_codon, Anja, NhatHoa? Any of you guys still about these days?
90 Views and nobody else knows anything?
This is starting to bug me now
I have looked everywhere. I have used the search, the wiki, google! I can't find any reference anywhere that explains to me how I can properly make a WM6.1 ROM for my Artemis using the required 6.1 files from a Diamond ROM.
HELP!!!!!!!
Start off with a base ROM first instead of porting. Porting can get very tricky and complicated. I'm currently in the attempt of porting a ROM (for the Hermes) and let me tell you, it's not easy. If you want to know more, i can show you what i'm doing via IM (faster) or here.
hey guys,
learning to cook right now and i was looking for the 21877 rom from the com2 tree (for the raphael in case) that will work with the visual kitchen. i have seen a few different things but want to really try to cook with the right tools. also, is there a thread like the 6.5.3 that is update with the latest builds?
thanks,
theknub
theknub said:
hey guys,
learning to cook right now and i was looking for the 21877 rom from the com2 tree (for the raphael in case) that will work with the visual kitchen. i have seen a few different things but want to really try to cook with the right tools. also, is there a thread like the 6.5.3 that is update with the latest builds?
thanks,
theknub
Click to expand...
Click to collapse
That thread has everything...just read it from the beginning to end!
i have tried... just a really big thread
Below in the txt there is the link to 4shared for the latest Com2 21882.
I have no language files, so you have only th3 0409 WWe here....ive made a request post for some language but iv got no answer.
Da_G thread is too much long because its plenty of request of help and other stuffs...IMHO it should be made only for the latest build and should made another thread for Helping people with the WM builds.
In another note, if people instead of put link to the latest build will make a simple txt file with inside that link, we all togheter should be able to get them from the main "windows software dev" thread without search inside it.
Alexx already do that in his postes.
af974 said:
Below in the txt there is the link to 4shared for the latest Com2 21882.
I have no language files, so you have only th3 0409 WWe here....ive made a request post for some language but iv got no answer.
Da_G thread is too much long because its plenty of request of help and other stuffs...IMHO it should be made only for the latest build and should made another thread for Helping people with the WM builds.
In another note, if people instead of put link to the latest build will make a simple txt file with inside that link, we all togheter should be able to get them from the main "windows software dev" thread without search inside it.
Alexx already do that in his postes.
Click to expand...
Click to collapse
af974, thanks for this. i'll check it out.
thanks again, took me a day or two to really understand the kitchen. started cooking now though.
smells like burned cod
Are not safe me whether I wrote this now into the correct range..
The MOD or Admin cannot push it if it is correct gladly into the correct range. Cook at a Blackstone HD ROM
Wants to replace gladly individual components of my ROM or also only take.
It concerns Manila Document Tab from version 2_5_19211619_0 or also the whole version infer.
Gladly I would use also only individual components of Manila of it since nevertheless everything of it is not needed.
My ROM is the version WM 6.5 21882 from Blackstone HD GER
Now I find however here nothing, how this lets itself realize in ervius the Kitchen.
From there also the question to the Cooks of ROMs is somehow feasible this.
Sorry for my English, it is not the best..
I close now this procedure, there here no the trouble made myself for me to help here.
Firstley im a complete newbie to the moddin world
but ad like to update my blackstone to the new TF3D 2.5
any 1 willing to give a guy sum help?
cheers
since touchflo itself is not published as cab files to simply install, you need to flash a rom that comes with the version you like. you'll find different roms here: http://forum.xda-developers.com/forumdisplay.php?f=453
and a tutorial on how to flash roms can be found here: http://forum.xda-developers.com/showthread.php?t=505377
also, as a beginner, you should check out the blackstone wiki