The power button on HD is in an inconvenient position and hard to press.
Is it possible to use any other button (like Vol-Down) to power off and on?
I tried AEButton, but it does not seem to have an option to "power-on".
Thanks
Power Off would be possible, however to Power On the device you always need to press the configured power button. This is since AEButton is a software solution and does not alter the hardware settings. Thus making it only run while Windows Mobile is on (by altering the Windows Settings), and since when the device is off WinMo isn't running, so it won't work while the device is off.
sank27 said:
The power button on HD is in an inconvenient position and hard to press.
Is it possible to use any other button (like Vol-Down) to power off and on?
I tried AEButton, but it does not seem to have an option to "power-on".
Thanks
Click to expand...
Click to collapse
It's supposed to be somewhat difficult ...
If you don't already know, virtually ALL power buttons are somewhat hard to press/use. It's supposed to be that way. If they were easier to press, you could easily power off your phone while it's in your pocket by accidentally hitting the volume up or down keys, or any other accidental push.
Peter
KilZone said:
Power Off would be possible, however to Power On the device you always need to press the configured power button. This is since AEButton is a software solution and does not alter the hardware settings. Thus making it only run while Windows Mobile is on (by altering the Windows Settings), and since when the device is off WinMo isn't running, so it won't work while the device is off.
Click to expand...
Click to collapse
I actually meant the state into which the device goes when you press the power button once (Sleep, suspend ... whatever that is called, although this state is sometimes called power-off), and not complete power-off (by holding the power button).
In this Sleep/Suspend, is it not possible to remap the button?
I mean that it is still able to receive calls in this state, so something is running. But not WinMo?
PeterHTC said:
If you don't already know, virtually ALL power buttons are somewhat hard to press/use. It's supposed to be that way. If they were easier to press, you could easily power off your phone while it's in your pocket by accidentally hitting the volume up or down keys, or any other accidental push.
Peter
Click to expand...
Click to collapse
You are right for accidental presses. However that can be taken care by assigning (if possible) a double press instead of single.
Oh, and I am sorry, I did not mean full power off, only sleep/suspend.
For PDAs, such a button placement may be ok, as you anyway have to use both hands to hold the PDA and take out/use the stylus.
But for this phone, single hand use is important. I dont use the stylus most of the time.
.
to power on with up/down control, change DefaultKeyLock to 0 in registry.
ucxoq said:
.
to power on with up/down control, change DefaultKeyLock to 0 in registry.
Click to expand...
Click to collapse
Thanks!! That's almost does it, but for the double press.
I added single press of Vol-Dn in AEB to Today Screen, and double press to a MortScript with PowerOff command.
Now to see if it accidentally comes on in the pouch...
Related
I used to have an XDAII (the very first) where the unit could be woken up by pressing any button. There was a setting in the control panel that allowed you to set it to only recongnize the power button or have the other buttons wake it up. Naturally I set it to the power button, but after a while, that button got worn down and stopped "working" so I naturally set it to recognize any other button.
This experience has taught me the hard way, that its a good choice to have (or maybe even a necessity in some cases) that other buttons to wake the unit up in case of situations like this.
I've just bought an Atom life and unfortunately it ONLY recognizes the power button to wake the unit up. Is there any hack or software out there that could enable the other buttons (or better yet, allow selection of which buttons can turn the unit on)?
I'd like to use the large middle button on the front if possible, since that button seems more "sturdy" than the power button. I may be able to save that poor power button from years of wear and tear.
just realized i posted in the wrong section. Moderators, feel free to move it to the parent Atom section, and my sincerest apologies
Hi, nargalzius
I have been search for decade, but i still cannot find the way to assign other button for waking up da device......
same problem here...
anybody out there figured this one out already?
bump
did anybody find a hack for this?
I have just the opposite problem. I use the headphones that come
with the Atom Life - the button on it not only turns on the device.. if
you bang the mouth piece on something (without hitting
the button), it turns it on too!! I'd love a solution to that
I use O2 Flame and got the same setting, no other hard key than the power button can wake up the device from sleep. Anyone knows the tricks or registry hacks, please share. Thank you very much.
Atom Life Wakeup Button
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
vishaal said:
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
Click to expand...
Click to collapse
You mean when the phone is in standby mode and you press the END key, the phone will come out of standby? Beats the whole purpose of standby then
I do echo the same "problem" of not being able to change the mapping of the power button to the front button.. ( as I was able to do with my XDA II)
I 'm confused about the "end" key solution..
Anyone finding a solution ?
Thank you all
Nearest program might be MORT saver? it allows you to specify the button that put the device in to MORT stand by and therefore the same button that will awake the device. Not exactly the power button option that you talk of wanting but at least MORT also stops the device from waking up when any of the buttons around the action button are pressed.
Is it possible to configure the camera button on Hermes/TyTN with Windows Mobile 6 to automatically turn on the backlight and "unlock" when pressed?
Currently, it takes five actions to take a photo when the phone has been "locked" and the backlight has been turned off:
1) Pressing the "power" button to turn on the backlight.
2+3) Pressing the "unlock" buttons twice to unlock.
4) Pressing the "camera" button to start camera application.
5) Pressing the "camera" button to take photo.
Ideally, taking a photo should only require pressing the "camera" button twice. The "camera" button is sufficiently small and hard for this to work safely.
I expected this to be a common request but I have been unable to find any info or even requests regarding this anywhere.
Kinda defeats the purpose of locking all keys if the camera button can be hit by something in your pocket, etc and activate a full backlight with the camera running. That would be a battery waster real quickly...
As I already wrote, I find the "camera" button to be sufficiently small and hard for this to work safely - except maybe if you have all kinds of hard items of junk in the pocket, too - which I don't and which would probably ruin the screen before the battery runs out making that the least of your problems.
vejrum said:
except maybe if you have all kinds of hard items of junk in the pocket, too - which I don't and which would probably ruin the screen before the battery runs out making that the least of your problems.
Click to expand...
Click to collapse
install s2u2, that will provide slide to unlock, one less press! Another better idea, don't set your phone to lock when in standby mode as your pocket has nothing. So, there is no need to lock. That would bring down to 3 press.
I hate the way power button is positioned on Hermes. I have trouble finding it plus each time I try to use it I accidentally slide keyboard open.
Is there any way to use PTT button as power button instead? I might be able to figure out how to use it to power unit down but is it possible to use it to power unit up while other buttons will still be locked?
Making PTT shut 'er down or suspend it is really easy, but I've never seen a way to make it power on with any button besides power.
Would it be possible to configure our Rhodiums to wake from sleep mode upon a quick double tap on the screen? If possible it could be set that only a double tap (one tap followed by another no longer than half a second later for example) would wake the device to ensure accidental knocks in our pocket wouldn't wake it.
Any ideas?
Thanks
anyone any ideas?
I'm going to go out on a limb and say this isn't possible without seriously jeapordizing battery life, so it wouldn't be something plausible.
Consider that what you're asking means your device will always have to monitor the screen and thus never enter standby mode.
Perhaps you should look into applying the registry fix that will wake your device on any key press (not just the power button). Maybe that will work for you as well, while still letting your device go into standby.
What is wrong with the built-in power button again?
I would like that also (different button to turn on). With the diamond the centre round button would be a better button to turn on the pda than the current power button (which is a little too far recessed for my liking) The centre button is larger but recessed also which would stop accidently turning in on in your pocket.
Link to previous thread regarding pressing any key to wake...
ohyeahar said:
I'm going to go out on a limb and say this isn't possible without seriously jeapordizing battery life, so it wouldn't be something plausible.
Consider that what you're asking means your device will always have to monitor the screen and thus never enter standby mode.
Perhaps you should look into applying the registry fix that will wake your device on any key press (not just the power button). Maybe that will work for you as well, while still letting your device go into standby.
Click to expand...
Click to collapse
yeah thats a fair point, ddn't think too much about the implications of it having to perhaps always be awake!
Spike15 said:
What is wrong with the built-in power button again?
Click to expand...
Click to collapse
Nothing wrong with the power button, just thought itd be a cool feature to be able to do that, but ill stick with whats best!
I think HTC's placement of the power button is perfect. I've been using smartphones and PDAs for a while and that's just the natural spot I EXPECT a power button to be. In fact with my breif stay with a Blackjack II I kept hitting the power button to dim the screen, which on that phone would actually turn it off, like off off.
And as stated above, when your phone goes into standby, the screen turns off, it can't detect anything. In order to keep the sensor on, you would be draining power when your phone really shouldn't.
I'll throw my coin in the hat of "silly idea"
My first Tilt 2, which had a dud microphone, the power button was fine.. It was recessed but easily pressed. My current Tilt 2 I have to press holding the phone longwise.. if I'm holding the phone on the sides I can't press the power button... I'm thinking the screen moves slightly more or the button is more recessed. It's kind of annoying.
Personally I'd also like not have to use the power button all the time myself, although I wouldn't want to tap to do it.. One of the four hardware buttons would be just fine.
Yes, I know sliding and removing the stlyus turn it on too, neither thing I do often.
Hello,
I'm using the International GT-N7100 Note II. It's rooted.
I find myself frequently touching the volume rocker or the Power button while using the phone, either when type-tapping or playing games, which gets annoying.
Have there been any mods or workarounds to, say, hold the Home button to access the functions of the volume and power buttons? At least, I can make sure I don't accidentally press those buttons when I do not intend to, and I also can make sure that I'm actually accessing those said functions when I want to, by pressing the Home button.
I prefer a mod or to edit the system files, if possible, rather than install an app for it, like the Volume Locker app.
Thank you for any information.
hey, if im not mistake,you could set 'hold menu button' activites by using 'simplistic control' donation version'
Thank you. But is there a method to directly edit a settings file just to add this behaviour? (i.e. hold the menu button to access the power button and volume rocker, and leave these untouched while in camera mode?) Thanks.
amgreenhawk said:
Thank you. But is there a method to directly edit a settings file just to add this behaviour? (i.e. hold the menu button to access the power button and volume rocker, and leave these untouched while in camera mode?) Thanks.
Click to expand...
Click to collapse
i dont think so,or maybe there s but i dunno about it,lol..sorry.