Would it be possible to configure our Rhodiums to wake from sleep mode upon a quick double tap on the screen? If possible it could be set that only a double tap (one tap followed by another no longer than half a second later for example) would wake the device to ensure accidental knocks in our pocket wouldn't wake it.
Any ideas?
Thanks
anyone any ideas?
I'm going to go out on a limb and say this isn't possible without seriously jeapordizing battery life, so it wouldn't be something plausible.
Consider that what you're asking means your device will always have to monitor the screen and thus never enter standby mode.
Perhaps you should look into applying the registry fix that will wake your device on any key press (not just the power button). Maybe that will work for you as well, while still letting your device go into standby.
What is wrong with the built-in power button again?
I would like that also (different button to turn on). With the diamond the centre round button would be a better button to turn on the pda than the current power button (which is a little too far recessed for my liking) The centre button is larger but recessed also which would stop accidently turning in on in your pocket.
Link to previous thread regarding pressing any key to wake...
ohyeahar said:
I'm going to go out on a limb and say this isn't possible without seriously jeapordizing battery life, so it wouldn't be something plausible.
Consider that what you're asking means your device will always have to monitor the screen and thus never enter standby mode.
Perhaps you should look into applying the registry fix that will wake your device on any key press (not just the power button). Maybe that will work for you as well, while still letting your device go into standby.
Click to expand...
Click to collapse
yeah thats a fair point, ddn't think too much about the implications of it having to perhaps always be awake!
Spike15 said:
What is wrong with the built-in power button again?
Click to expand...
Click to collapse
Nothing wrong with the power button, just thought itd be a cool feature to be able to do that, but ill stick with whats best!
I think HTC's placement of the power button is perfect. I've been using smartphones and PDAs for a while and that's just the natural spot I EXPECT a power button to be. In fact with my breif stay with a Blackjack II I kept hitting the power button to dim the screen, which on that phone would actually turn it off, like off off.
And as stated above, when your phone goes into standby, the screen turns off, it can't detect anything. In order to keep the sensor on, you would be draining power when your phone really shouldn't.
I'll throw my coin in the hat of "silly idea"
My first Tilt 2, which had a dud microphone, the power button was fine.. It was recessed but easily pressed. My current Tilt 2 I have to press holding the phone longwise.. if I'm holding the phone on the sides I can't press the power button... I'm thinking the screen moves slightly more or the button is more recessed. It's kind of annoying.
Personally I'd also like not have to use the power button all the time myself, although I wouldn't want to tap to do it.. One of the four hardware buttons would be just fine.
Yes, I know sliding and removing the stlyus turn it on too, neither thing I do often.
Related
I used to have an XDAII (the very first) where the unit could be woken up by pressing any button. There was a setting in the control panel that allowed you to set it to only recongnize the power button or have the other buttons wake it up. Naturally I set it to the power button, but after a while, that button got worn down and stopped "working" so I naturally set it to recognize any other button.
This experience has taught me the hard way, that its a good choice to have (or maybe even a necessity in some cases) that other buttons to wake the unit up in case of situations like this.
I've just bought an Atom life and unfortunately it ONLY recognizes the power button to wake the unit up. Is there any hack or software out there that could enable the other buttons (or better yet, allow selection of which buttons can turn the unit on)?
I'd like to use the large middle button on the front if possible, since that button seems more "sturdy" than the power button. I may be able to save that poor power button from years of wear and tear.
just realized i posted in the wrong section. Moderators, feel free to move it to the parent Atom section, and my sincerest apologies
Hi, nargalzius
I have been search for decade, but i still cannot find the way to assign other button for waking up da device......
same problem here...
anybody out there figured this one out already?
bump
did anybody find a hack for this?
I have just the opposite problem. I use the headphones that come
with the Atom Life - the button on it not only turns on the device.. if
you bang the mouth piece on something (without hitting
the button), it turns it on too!! I'd love a solution to that
I use O2 Flame and got the same setting, no other hard key than the power button can wake up the device from sleep. Anyone knows the tricks or registry hacks, please share. Thank you very much.
Atom Life Wakeup Button
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
vishaal said:
Hi guys, there doesn't seem to be an answer on here and I assume the reason is as follows - Atom Life also wakes up by pressing the "end" key... (I think this is a general hardware setup)
I was also a bit weary of the power button being worn out, so I did some experimentation and found that the end button works a treat if you have the same concern "end - s2u"... swweeet!
Hope this helps.
Click to expand...
Click to collapse
You mean when the phone is in standby mode and you press the END key, the phone will come out of standby? Beats the whole purpose of standby then
I do echo the same "problem" of not being able to change the mapping of the power button to the front button.. ( as I was able to do with my XDA II)
I 'm confused about the "end" key solution..
Anyone finding a solution ?
Thank you all
Nearest program might be MORT saver? it allows you to specify the button that put the device in to MORT stand by and therefore the same button that will awake the device. Not exactly the power button option that you talk of wanting but at least MORT also stops the device from waking up when any of the buttons around the action button are pressed.
Is it possible to configure the camera button on Hermes/TyTN with Windows Mobile 6 to automatically turn on the backlight and "unlock" when pressed?
Currently, it takes five actions to take a photo when the phone has been "locked" and the backlight has been turned off:
1) Pressing the "power" button to turn on the backlight.
2+3) Pressing the "unlock" buttons twice to unlock.
4) Pressing the "camera" button to start camera application.
5) Pressing the "camera" button to take photo.
Ideally, taking a photo should only require pressing the "camera" button twice. The "camera" button is sufficiently small and hard for this to work safely.
I expected this to be a common request but I have been unable to find any info or even requests regarding this anywhere.
Kinda defeats the purpose of locking all keys if the camera button can be hit by something in your pocket, etc and activate a full backlight with the camera running. That would be a battery waster real quickly...
As I already wrote, I find the "camera" button to be sufficiently small and hard for this to work safely - except maybe if you have all kinds of hard items of junk in the pocket, too - which I don't and which would probably ruin the screen before the battery runs out making that the least of your problems.
vejrum said:
except maybe if you have all kinds of hard items of junk in the pocket, too - which I don't and which would probably ruin the screen before the battery runs out making that the least of your problems.
Click to expand...
Click to collapse
install s2u2, that will provide slide to unlock, one less press! Another better idea, don't set your phone to lock when in standby mode as your pocket has nothing. So, there is no need to lock. That would bring down to 3 press.
Hi guys,
Here is my dream situation:
- Double tap "Hang Up" button to lock the device (I understand this can be done with AEButton Plus, although I haven't tried yet)
- Screen will turn off after a while
- Unlock the device by swiping the finger
At no point are the hardware buttons pressed! My new cover makes touching the power button very hard
Is this possible???
Thanks
They problem, as I am sure you've realized, is that once the phone enters suspended mode the digitizer is disabled (touch) and so are all other non hardware buttons.
I've always had problems with the power button on the HD being a pain in the neck to find and hit, so what I did to rectify this was cut a small hard plastic sticker to the size of the power button and stuck it on there. This helps a lot in not only finding the power button but also pressing it.
(Sticker was a liquid crystal thermometer sticker made by OMEGA: product number RCL-8050/150 I found this to be the perfect width, so I cut off a 1mm sliver off the end)
If you were really stuck on making this work exact as you described, you could prevent the phone from shutting down and just turn off the screen.
(I'm unsure of how the different screen off programs effect the digitizer, my guess it they all disable it at the same time, but I'm sure all that could be seperated.)
However since only the screen would turn off not the device, you'd drain the batter, and its short life would make this not worth it.
Alternate solutions:
Instead of doubletap hangup which you could do through AEButton Plus, but longpress end key can do the same thing just instead by holding the end call key
Also, you configure your phone to wake up at the press of any hardware key, IE the volume buttons on the HD.
Seen here
Also, you configure your phone to wake up at the press of any hardware key, IE the volume buttons on the HD.
Seen here[/QUOTE]
Could you please upload the Keylock Zip file?
Hello,
I saw that the phone is switched off when I press the power button very quickly after a few seconds turns on. This for me is very annoying, if I have the phone in my pocket sometimes turns on probably because Touch inside the power button. It is possible to change to having to press for a few seconds and not for 1/10 second ?
it is not possible ?
alfredolo said:
it is not possible ?
Click to expand...
Click to collapse
Why is this a problem? The screen will auto switch off again in 15 seconds if still locked.
Becouse i want turn off the phone.
You want it totally switched off? Hold down the power button and a menu pops up on the screen, switch if off from there.
There is no way to stop the power button waking up the device when it is "standby", that's its purpose, I can't imagine anything more annoying than having to hold down the button just to check my phone
I don't see how you guys don't understand his question.
He says that it is annoying that when you turn the phone off (for X reason) and put it in your pocket, the fact that it only takes a slight touch of the power button to turn the phone on means it involuntarily turns itself on in his pocket. He wantsto know whether it is possible to make it so you have to press a long time on the power button in order to turn the power on, so that if the power buton is only pressed for a second, nothing happens.
I really wish people tried to actually read questions on forums.
This is an important question for all that travel by air.
to avoid that during the take off or the landing the desire turn on inadvertently
My problem was born in the cinema when I turned off the phone and put it in my pocket. After a few seconds I heard the sound of ignition, so I switched off again, then yet again ... up when I removed the sound, while other people looked at me in a mole ..
It would be nice if you could choose to press the button for 2-3 seconds before it turn on, to prevent accidental starting
Totally agree. I had the same issue on the plane the other day. I had powered it off but during take off it powered itself on in my pocket. I used to have an iPhone and it at least required you to hold the power button down for a few seconds before it turned on.
-------------------------------------
Sent via the XDA Tapatalk App
speedking34 said:
I really wish people tried to actually read questions on forums.
Click to expand...
Click to collapse
I really wish people took the time to actually read the reply and accept that sometimes when the OP is in broken english it is misses details, before jumping in to criticise others while contributing nothing of value to the thread.
If you reckoned it was easy to understand the question, why have you offered no actual answer or constructive advice?
If you assume that the question is... can I set the phone so that it requires a long-press of the power button to switch it on when it is completely powered off... the answer is... No, you can't. Perhaps there is scope for this in a modded firmware if you root the device. I suggest you email HTC support to suggest this an an enhancement in a future update to the phone.
Why don't you try this FlexiSheild Case Cover, I purchased one and it has a very robust construction flexible but not sloppy like the silicone ones.
I have found that to turn the phone on or from standby you have firmly press the on button you cannot turn it on by simply sweeping your finger over the button it also offers a lot of protection to the phone and has some rubbery coating on the back to stop the phone slipping out of your hand.
I believe this will elimenate your false switch on of the phone
http://www.mobilefun.co.uk/flexishield-skin-for-the-htc-desire-black-p24206.htm
for a big phone isnt it a pain to have to press the top button to wake the damn screen? same thing happened to the nexus one ( has hack that wakes with trackball ) , incredible as well.
I would love this as well...hate hiting the power button...
Yea if someone makes an app that does this they should make the home button unlock it too
Yes, please that would be great. I hate having to use the power button to unlock.
Yea it would be nice if you could hit the home and search button at the same time to turn the screen on
Get the "No lock" app from market. Put the widget on your screen, choose unlocked. Now your phone will wake with the volume rocker. I keep the widget so I can lock it again when working (walking around all day).
yeah but I want to either tap the screen or a capacitive button to wake the phone. The mechanical buttons just feel like junk to me. I would like ot never even have to touch one of the mechanical buttons...
I'm with most of you, coming from my iPhone and having my Evo sit on my desk, I like pressed down on the face, so my phone doesnt move. Power buttons too hard to just tap.
Unfortunately, in order to wake the phone with a soft-key, the capacitive screen would have to be active, which means your phone would already be awake, thereby defeating the purpose of programming such a thing. Paradoxical.
Think along the same lines as a TV that you change the channel in order to turn it on... it'd have to already be on to change the channel in the first place.
Makes sense, I was just hopping for button on the front. I'll just need to adjust.
i wudnt mind having one of my vol buttons as a "wake" button... n then wen the screen comes back on it goes back to its default use as a volume key. this power button kills my shiznet >=|
I think I could get used to having to use the power button, altho I'm gonna side with most of you, being able to wake it from the volume rocker just seems more natural. Maybe once I switch cases the power button will be easier to press...
The power button hump on this silicon skin from Sprint isn't prominent enough, it actually makes it slightly harder to press imo. The hump doesn't protrude out very much and it's right on a mold or manufacturing edge on the skin which doesn't make it any easier to find.
Hoping the Amzer Luxe skin I ordered is better in this regard...
There is a app called menu unlock from team douche. It's available on the market [donate] or on xda for free. You'll need root for it but what it does is get rid of the swipe to unlock the screen. You'll still need to wake with the power button though. I'm trying to see if we can learn from the trackball wake on the nexus to port it to use the volume down button. With this the combo is press volume down then press the menu key and your going vs. swiping or the power button.
"No Lock" app in the market removes the lockscreen and wakes the phone with the volume keys. It was already mentioned in this thread but everyone seems to have ignored it.
dazabale said:
"No Lock" app in the market removes the lockscreen and wakes the phone with the volume keys. It was already mentioned in this thread but everyone seems to have ignored it.
Click to expand...
Click to collapse
lol, seriously.