YABtI - Yet Another Bluetooth Issue - Touch Pro2, Tilt 2 Windows Mobile General

After getting my US TMo TP2 last month I've been pretty sure everything Bt was working properly.
Giving commands is 100%, I can touch the call button on my Moto S9's and say Dial <contact>, or Dial <555-1212> or What are my appointments tommorrow?, etc. and it works great.
I thought notifications were working as well. Calender appt. announced via my S9's and the text to speech was impressive as it read them out to me but something was missing and I just realized what it was. Incoming phone calls were not being announced properly. I did hear it ring and I could press the headset button and take the call just fine but it was the default S9 ring not my ringtone and I did not hear VC announce the number or contact. I was having to look at the phone to see who was calling.
So I went searching XDA and found this post that has just about everything you need to know about MS VC. After reading thru it thoroughly and trying many of the settings and reg tweaks I found out how to make VC announce incoming calls but it will only do so thru the device speaker an not thru Bt Handsfree. I've tried everything in that post that might help but to no avail.
Any one here have any idea?
S

Microsoft are working on it apparently.

Related

Garmin Nuvi 360 - As Bluetooth Car Kit

Originaly posted this in the Nike Accessory section, but this device has worked on a couple of my phones so I thought it would be great to post here a well. I decided to write this post after testing for two weeks to make sure my excitement has held up to the initial expectations and to see if any woes present itself. So far I stand by my initial comment; this is the best Windows Mobile accessory I have found to date.
I originally bought this device as a GPS for my car and thought the bluetooth capability would be an added bonus. The handsfree capability of this device is by far the most impressive use of bluetooth I have seen. I have only tested this on the HTC Touch Dual 20 Key (Nike), compatibility and functionality may vary for other devices. So far no real problems; it connects, it works as stated and quite well too.
Highlighted capbilites in order of importance/functionality (to me):
(see screen shots for examples)
Handsfree Bluetooth carkit
Phonebook retrieval with Spell/Search Function
(dynamicaly uses phone address book not programed GPS contacts)
On Screen Dailer/Phone Pad.
Incoming Call Notification (image shows number but also displays name)
Call History (From phone, not GPS)
Phone Status (Signal/Battery)
Loud Speaker
Great Mic w/External Mic hookup
Voice Comand/Dail Compatible
General use description - Use images below for reference:
Device connects within 6-20 seconds after initial GPS bootup(about 20 seconds)
When calls come in there is an easy to use screen with Answer or Ignore option.
To make calls goto the main screen, press phone icon and select either phonebook where you can spell name and it will narrow down, or you can voice dail or use your call records or look up Point of interest and select dail from the results.
Call options let you pull up the dailer, mute the phone or transfer audio back to the phone while you are in a call. You can navigate while in a call, press the red call status button in the map mode to to see the status or end a call quickly.
I have so much more to tell you about but I will leave with this and for anybody to ask questions.
Like everything in the world there are always flaws or downsides. Here are a few (not necisarily flaws but fixes that would have made it better)
I listed voice dail last because the use is great but the audio feedback/voice prompt is quiet and I felt was least usefull in comparison to the other features. (using MS Voice Command 1.6) Voice recognition works great with the Nike but it requres a few key presses to initiate through the on screen buttons.
This GPS can send and receive text messages and read incoming aloud but this feature is not compatible with this phone. Maybe we could fix this another time friends!
Slow Device Bootup (20 secs), but fast paring most times after bootup. I have this device permanetly mounted and the slow boot doesnt bother me ever; its rare when I get a call before I can even pull out of the garage but If I do it will connect within seconds.
Thats all for now but if your interested this device retailed for about 600usd, I got mine on clearance for about 350usd.
Have a good one
jcostanza4
Thanks !!!
jcostanza4 said:
[*]I listed voice dail last because the use is great but the audio feedback/voice prompt is quiet and I felt was least usefull in comparison to the other features. (using MS Voice Command 1.6) Voice recognition works great with the Nike but it requres a few key presses to initiate through the on screen buttons.
Click to expand...
Click to collapse
How do you get Voice Command 1.6 to respond? I have a Nuvi 680 and Tilt but nothing happens when I press Voice Dial.

No voice from LG HBM-700

I just purchased an LG HBM-700. Everything works with my 7501 Advantage, ringer, connection, call in, call out, etc. but there is no voice incoming or outgoing. I've checked all the settings, it's not on mute. It works perfect on another phone I have, so the device seems ok. Any idea's. Thanks.
Never mind. It started working. I have no clue why. Nothing was changed. I called my landline phone from the device & was doing the "testing, testing" routine & all of a sudden I had voice.

8525, Voice Command 1.6 and HTC WM6 ROM upgrade.

Hi.
I have spent months trying replacement VC files and cabs in hope to get consistant Call notifications to various BT ear pieces with no resolution.
Has anyone been able to enable VCs call announcements to reach any BT ear piece.
THX.
Do you mean that your ear piece tells you when a call is coming in? If so I use the Voicecommand cab that's in the add ons for vp36's ROM: http://forum.xda-developers.com/showthread.php?t=334946&highlight=vp3G.
I also use the little Jabra ear piece: http://www.jabra.com/Sites/Jabra/NA-US/products/Pages/JabraBT8040.aspx
I can initiate Voice Command with it and the ear piece tells me when calls are coming in.
If you are expecting VoiceCommand to tell you the name of who is calling in that you recorded, I don't think it actually does that.
Just read the specs for 1.6 and it looks like it does include what you want. We'll see if we can find a cab for it. If you find it post the link here and I will do the same.
The bottom line is this..You need a headset with the AD2P profile like the one linked above. You also need to install the .cab linked and enable it once installed.
I use the Jabra BT8010 myself..If you don't have a headset with AD2P its not gonna happen so no need to go further.
Now if you have all this like I do then yes notifications with come through the headset. If you want incoming calls announced then goto Start/Settings/Voice Command then highlight phone and click options...check off 'Announce incoming calls' then press ok.
So when I'm driving in my car I can tell if I got a email or txt msg just by the tone I have set for each. If I turn on announce calls then it will say what I have in my contacts.

No voice dialing on Touch Pro 2?

I have a dutch ROM. I cannot find how to record voice dialing commands, moreover, the manual does not mention anyting about it.
What's up??
Voice dialling
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
It works. Voice Command gets to the one hardware button assigned that's configurable. Just hold the Call button until u hear a beep.
I disabled Voice Command though due to the ringtone volume bug. Every 2 seconds the ringtone gets low for an announcement that you don't hear. Still waiting for a proper fix without all the work of replacing files.
I was looking for the original voice dialing function. But it really isn't there on the TP2. Voice Command is much better though. But damn that bug.
Another problem is that I use it on my bikehelmet when driving. But on the TP2 you need to hold the call button 3 secs (using Voice Command). That turns my bluetooth communication system off. xD
On my previous phone Xperia X1 I could assign a button without needing to hold it for 3 seconds. That worked for my bikesystem.
Google voice2go
Cyberon Voice speed dial is the best for the job but didnt try it yet. Dunno compatible with broadcom/widcomm stack if using btooth hfree. anybody tried it ?
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
tornado said:
I try Cyberon Voice speed dial, it seem to work well on mic of phone . but it don't work by BT activate, I think BT stack not support. Any one can solve this?
Click to expand...
Click to collapse
Can you post a download link for this software? Thanks
Pimmr said:
Can you post a download link for this software? Thanks
Click to expand...
Click to collapse
see link in http://forum.xda-developers.com/showthread.php?t=523114
MS Voice Command works gr8 at least when i talk to my phone english
you have to buy the voice command software...
terryd1980 said:
There is no voice dialling option on the UK spec version either, I've tried MS Voice Command v1.6 and that doesnt work at all either, anyone got any ideas?
Click to expand...
Click to collapse
you have to buy the voice command software from Microsoft, its about $39.00. None of the foreign phones came with bluetooth voice command software...
Yes MS voice command works like a charm on TP2
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
The Telus version of the Touch Pro2 comes with Voice Command 1.6.21052 in ROM
terryd1980 said:
Not through Bluetooth it doesnt, thats the main point of voice dialing, I cant fiddle with my phone whilst driving as thats illegal, voice dialing through bluetooth was a breeze with Voice Command v1.6 on the old Kaiser, I need to find out how to get that functionality again.
Click to expand...
Click to collapse
after reading your post sent a question to HTC...cut a long story short they tested MVC on a TP2 and through the BT headset succesfully activated a command... when i first contacted they sent the following cab and suggested i install ... so this may help
CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB
did not buy because of this post but according to HTC the profile does work on TP2 so back on final list after my 1st choice the B7610 is pushed back to Oct launch
Due to speaking to HTC support who said they had voice over BT headset working on TP2 brought one and low and behold it does not work ... not happy
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
ChriX84 said:
Nice to know.
I googled CVC-PPC-WWE-711091-hTCPPC (Aus Voice Commander).CAB got redirected to the HTC site.
http://www.htc.com/au/SupportDownload.aspx?p_id=71&cat=3&dl_id=277
Guess what. Not available for my TP2.
Click to expand...
Click to collapse
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
hecksk said:
So that's it, there is no voice dialing via bluetooth?
I've got the same issue with this phone, I could not activate voice dialer to listen me by pressing button on handsfree.
Is there anyone who can fix it????
Click to expand...
Click to collapse
I emailed in detail about this problem. Mentioning that Voice Command only works on the phone itself by holding the call button for 3 secs. When using the bt handsfree set the handsfree set turns off when holding the button for 3 secs on it. While it works perfectly on my old Xperia X1 (wich is made by HTC too). With 3 different bt sets. No holding buttons for 3 sec. But only by shortly pressing the button.
Hopefully they answer with good news.
guys, I have an idea: what if we use AEB button plus to map voice command to one of the vol key-long press or double press for example, and then we see if the BT headset is capable of invoking it using its own volume keys? dunno if it's clear enough...
you might try it, so no long press on power button of the headset or so...
the other problem: even if my strange idea would work, I dunno if then the TP2 / voice command would listen to my commands through the BT headset.. but it might be worth a try
this absence of voice dialing and all this problems are driving me mad
cheers!
Can someone confirm if MS Voice (UK) works on the TP2?
When I installed this on my Diamond, it f***ed up the phone and required a hard reset .... twice! Once I thought it was my fault, but I did it again to make sure, and no it was the phone!
It worked great on my previous phone, but I've just got this one the way I like it, and would not like to have to reset everything
I have the TMoUS TP2 that came with MSVC preinstalled and it works perfectly with my Motorola S9 headset via BT.
Maybe try to get the version in the TMo ROM?
S

Issue with Jawbone Prime and TP2

Hi,
I wanted everybody to be aware of this issue.
When you use a Jawbone Prime with TouchPro2, on every other handset, you can disconnect the call on Jawbone by pressing the send/end key on the Jawbone.
This function of using the end key on the Jawbone does not work on the Telus TouchPro2.
I have gone through troubleshooting with Jawbone, still have same issue.
HTC sort of seems to be aware and will not troubleshoot.
Telus Data support were useless, no troubleshooting.
I believe this may be just an issue on Telus model, HTC was not aware of issues with T Mobile version or European versions.
I will also post to PPC Geeks and XDA developers as well.
Does anyone have a solution/reg edit that will solve this issue?
Dave
same issues w. verizon tp2 and jb prime
verizon tp2. unable to end call from jb prime. voice command, volume toggle, last call commands all work from jb prime. Just can't end a call from headset...
VZW TP2 has many BT Handsfree Bugs
Have similar problems with 2 Motorola headsets and Jawbone on VZW TP2. BT Handsfree has many issues --
1) cannot end calls from headset
2) cannot consistently access voice command.
3) Voice command reads sms and email headers aloud over the handset speaker when set to speak to BT headset only.
4) Dialer touch tones come out of phone speaker instead of headset.
5) Touch screen numeric pad goes blank after ~1minute on a BT handsfree call.
6) And then there is the irritating alert that BT headset disconnected so I should put the phone to my ear -- as if I didnt know I shut the thing off myself or could no longer hear a call! I wish at least that alert could automatically clear after 5 seconds.
I filed a support request for 1-5 with VZW earlier today. Forgot about #6 until moments after I ended the call and turned off the headset. VZW rep gave me HTC Tech Support phone number. Will call them Monday AM!
I had no issue using the JB2 on TMO. I just ordered the JB PRIME and i am helping its the same.
I'm having the same issue with the HTC Ozone. No call/end button, no redial, and no voice command. However, if I reboot the phone, everything works just fine! But then, almost at random, it just stops working again... Any ideas??
If this is anything like my aging Hermes I wouldn't expect a fix from HTC ever
Its depressing to know 3 years later it still seems impossible to get a phone with working ms vc and the kicker is this phone comes with it.

Categories

Resources