Related
Hi all
This is my first post but i have been reading in the forums for a couple of days to see if i can work out how to fix my pride and joy by myself.
I tried to upgrade to WM6 and it seemed to halt mid update and i lost my active sync, it was only a few seconds into the update and i stupidly left the sd card and sim card in the device, this may have been the problem. I can get to the boot loader screen as i can see serial and v1.00 on the grayed out screen. I see USB in place of serial in the boot loader screen when i connect the USB lead and also hear the connection sound on my computer. I know that active sync is working as i have connected my c500 smartphone to check. I have also reinstalled Windows mobile device center. I have also tried to connect on my XP lappy and when i try to start mtty 1.42 it blue screens my lappy (anyone else seen this or have a solution?)
Main thing is can i use an SD image to flash a new rom
If not how can i get active sync to see my device
anyone know a good repair shop in the UK
I really have hunted the forums for an answer to this problem but can't readily find a solution any help gratefully received. Also reassurance that my XDA is not totally dead would be nice.
XDA EXEC
Running boot loader screen only
trying to restore using Vista and Windows XP pro
Yu have not been reading verry well!!!
That is easy to fix, just read WIKI
Disable usb in active synh!!!!
Hi thanks for the speedy reply, but i did try disabling the USB connection in active sync and nothing altered. I may be missing something tho so will have another look at the WIKI. Maybe it's because im using Vista, reason being that my lappy running XP is blue screening, would i be better using the lappy and fixing the mtty problem? If you could give me a link to the easy fix so i could find it a little faster. I really wanted to sort this out myself but i am also concerned that my pda is screwed and although all you maybe see a lazy n00b that hasn't read the site very well i have put in a large number of hours reading, i admit flashing firmware is not something i do every day and im a little out of my comfort zone and a few pointers would be very much appreciated.
I have some staff in my folder wich helped me in any problem situation i have ever been.
Try to borrow someonce PC...
Dont use hubs.
Use the same USB port for the whall proces
Done all of those but still no active sync connection! Is there some way the profile for the PDA in active sync can be removed to allow a clean install? Or can i flash some way with the SD card and avoid Active Sync altogether?
I appear to have sorted the problem now. It would seem that the IR port was conflicting with my active sync connection, i was getting a blue screen and a message about ircomm.sys when i disabled the virtual IR port in control panel my pda connected to the mity application without any problems. Hope this will help someone else that is stuck on the same problem.
First I have to state: I've already searched the web and xda-developers forums. Tried all solutions found, none work.
I don't connect my HTC Touch Pro 2 to my computer (Vista 32bit) often; other than the first few days, when I was downloading a lot of softwares to my device, I don't connect them at all. But the point is I was able to connect to WMDC.
Yesterday I wanted to try out Pocket Diablo, so I had to connect my device in order to install .NET CF 2.0. But I found I can no longer sync:
- Before I connect the device, I can see WMDC's green tray icon
- After I plug in the device (using the cable from HTC), WMDC's tray icon disappeared.
- I checked Device Manager, and found "Windows Mobile Remote Adapter" cannot start, error code 10. There was no mobile device listed.
- I tried another USB port, same result. I tried uninstalling all USB hubs and root hubs, let them reinstall, reconnect device, same result.
- With device still plugged in, I uninstalled "Windows Mobile Remote Adapter" and deleted the driver too. Then I unplugged device, uninstall WMDC driver update and WMDC itself, reboot PC, download WMDC6.1 from Microsoft again, reinstall WMDC, reboot, still no tray icon, and reconnect device with same result.
- I tried the above together with giving Users group full control on the registry key "HKLM\Software\Microsoft\Windows NT\Current Version\Svchost\WindowsMobile", same result.
- If I uncheck "advanced connection" on my device, there is no "Windows Mobile Remote Adapter" in device manager, but there is a generic mobile device listed. In WMDC it still thinks there is no device connected, and I cannot access the device in Windows Explorer.
- If I connect the device as a disk (under device's USB connection settings), I can access the device through Windows Explorer.
- I even hard-reset my device, still same result.
- I tested my old O2mini, same result.
- I don't recall any big changes on my system since my last successful connection.
- I tested my HTC Touch Pro 2 in my office (Vista 32bit), and it can be connected successfully.
So it seems the problem is in my home computer; the Windows Mobile Remote Adapter (version matches WMDC6.1's version) refuses to work in all cases.
Other than taking the sync cable in my office back home tomorrow, I'm all out of ideas of what to try next.
Can anyone give me a helping hand?
Bump. Please help, I really need to solve this.
- I'm taking the cable in office home, but I highly doubt that is the reason because with the cable at home I can connect as a disk and can charge.
- I notice in office (the successful case), the remote adapter is named "Windows Mobile Remote Adapter #2". At home (the failure case) there is no #number, just "Windows Mobile Remote Adapter".
Tested and it is not the cable. Cable used to successfully sync in office has same effect at home - Windows Mobile Remote Adapter cannot start, code 10.
I tried enabling WMDC debug log, but there're none - looks like the process failed at the driver stage and WMDC is not even started.
Also, when I have the device connected with the non-functioning driver, it seems to wreck havoc on my real network driver. I often need to reconnect my network connection.
Can anyone help?
It's getting weirder and weirder...
- I reinstalled WMDC for the countless time, and suddenly I am able to connect to O2mini (which does not connect via a network adapter). O2mini shows up in WMDC (can setup a partnership) and explorer. But not HTC TP2.
- If I disable advanced connection on TP2, I can connect TP2 as a Mobile device, but there is no network adapter. WMDC detects no connection, and I cannot view TP2 in explorer.
- I tried connecting O2mini again after TP2's failure, and O2mini cannot connect too - device manager shows no problem, but in WMDC I get nothing but the red stop sign and a simple message: "Error". No entries in event viewer.
And is anyone even reading this thread?
I was having a similar deal. Sync works solid on XP at home, was working but then stopped on 2 laptops with Vista and giving me those error codes.
I did the same things as unistalling mobile center on vista to no avail.
What did work was going onto the device, Start/All Applications/ActiveSync. Then Menu/Options and delete on the laptop PC's.
Now when I sync my vista laptop to the device it shows up as an additional device. I can copy files to it, I'm not sure if it syncs any other info.
The active sync also has an option for connections where you can uncheck "same for all pc's". I didn't try that one, but it might do something.
Update the Driver?
shealine said:
I was having a similar deal. Sync works solid on XP at home, was working but then stopped on 2 laptops with Vista and giving me those error codes.
I did the same things as unistalling mobile center on vista to no avail.
What did work was going onto the device, Start/All Applications/ActiveSync. Then Menu/Options and delete on the laptop PC's.
Click to expand...
Click to collapse
You mean removing the partnerships? I already did that - I had hardreset my TP2 for nothing too.
yrreP said:
Update the Driver?
Click to expand...
Click to collapse
I tried, but Vista said I already have the latest version (6.1.6965.0). I tried uninstalling (and fill the checkbox to remove the driver) and reinstalling, no difference.
It has to be something not right on my computer's drivers.
I'm going to compare the driver files of my home and office computers and see if there are any difference...
I copied all files related to the Windows Mobile Remote Adapter home, and compared them to mine. They are all identical.
I also tried forcing Device Manager to show non-present devices (by setting two environment variables), removed the related ones and tried again. Same result.
I'm all out of ideas now.
I'm even considering moving up to Windows 7 (Ultimate 64-bit), hoping that will solve my problems.
-- but what? They leave me with a nasty bug and I consider paying them even more? Whiskey, tango, foxtrot?
Awesome, finally i found someone that has (i think) 100% my problem.
Let me ask you this, what is your computer specs? Because this happened to me after i got a new computer >.< .
Mine is
Asus p7p55d LE motherboard
i5 50?
Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600)
I also have a HTC Touch pro2 (verizon) but i have testing my computer with a Samsung Omnia (verizon) to confirm my problem.
Edit: BTW this is on a Windows 7, just throwing it out there so that people can be even more mind boggled
Asus P7P55D Deluxe
Intel i7-860
2 sticks of Kingston 2Gb
I got my TP2 from Fortress (Hong Kong), they added a bunch of goodies in the ROM, like the radio cab, 1% battery driver, a business card scanner, etc.
You have the same problem on Windows 7? I am going to buy W7 tomorrow, I'm going 64-bit...
If I get the same problem in W7, then well, damn... at least I can connect TP2 as a driver and write data to it. But if I need to install anything from the PC-side, I'll need to rip the cab out of the installer.
holy crap then i think i know why its not working. Maybe its because of the new chipset p55? Doesnt support the drivers? or something
bornskilled200 said:
holy crap then i think i know why its not working. Maybe its because of the new chipset p55? Doesnt support the drivers? or something
Click to expand...
Click to collapse
Definitely not.
Plus I have sync'ed successfully before, and my TP2 plus cable can still sync in office, advanced connection on. It's a software problem.
I encountered the exact same error in Windows 7.
The Windows 7 is a fresh install, Windows updated, and installed 64-bit version of WMDC.
Darn.
First, sorry for my very bad english.
I had the same problem ( Error code 10 with Microsoft Mobile Remote Adapter) with p7p55d and Windows7.
It was a trouble with my asus p7p55d.
- I updated my bios to the 0711 version (this version does not appear on AsusUpdate, i found it on www.asus.com)
- I uninstall old Windows Mobile remote adapter
- I uninstall WMDC
- reboot
- simply plug my phone and let windows update do the job. This time it was good for me...
I have the same issue with ASUS P7P55D PRO and Windows 7 Ultimate 64bit, even with BIOS 0711. I tried all the ideas, nothing helps.
The same problem for me.
Windows 7 64bit,
Gigabyte P55M-UD2 Mainboard
I report great success with this problem!
Like suggested from a previous poster, i did update my bios to 605 (this is for p7p55d LE). But i noticed one thing, the setting for Plug and Play was set to that the bios handled it. I changed to so the that OS (?) handled it instead and tried everything again.
Happy to say (after some extra problems that does not pertain to this error) i finally got it to work. Hope my experience help others.
Encountered a similar issue yesterday.
WMDC could not sync. Although when selected as a disk drive, it connects fine.
What fixed it for me was to disable this setting in the device: Settings/connections/usb to pc/enable faster data synchronization.
Exit out, no reset required.
Good luck.
I have the same problem since my new gigabyte p55-ud5
i have windows 7 Ultimate. my htc diamond work fine for one week, then it stoped sync.
i think its somthing with the memory....
i tried to change the speed on my corsair DHX 2GB from 1600Mhz to 1333 and it worked for couple of days.
then it stoped sync.
tried to add voltage in bios but no good.
updated the bios - then it only worked with memory speed 1333 or 1066.
i shutdown my computer only once in a week.
then it started again. now no matter what i do - no SYNC.
i searched for this error alot and the common hardware is:
P55 + vista/win7 + HTC.
PLEASE HELP!!!!!!!!!!!!!!!!!!!!!!!!
Firm-up!
i have a good news!
Finally i got it after firm-up the bios.
Asus p7p55d turned out to got a problem installing 'Windows ... Adapter'
http://www.asus.com/product.aspx?P_ID=RBA8CzWoopUlYRFZ&templete=2
.
Description P7P55D 1002 BIOS
1. Fix PCI-E X16 may downgrade to X1 mode
2. Improve system stability
Good Luck!
So... No idea what's happened, but today I can no longer sync my phone with my Win7 laptop. So far I've deleted the partnership on my phone & in the Windows Mobile Device Center (WMDC.) Then I uninstalled and reinstalled WMDC. The error I'm seeing in the Event Viewer:
Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).
Click to expand...
Click to collapse
I'm at a loss here. I've never had a problem syncing my phone before. I've been syncing it regularly with this laptop & my home pc for months. The only thing I've done lately is install CoPilot8.
I can see the M$ Windows Mobile Remote Adapter show up under 'Network Adapters' in the device manager. Should anything else show up? Any ideas? I've been reading up on this error message for ages now and nothing's working for me. I really don't want to do a hardreset, but I will if I can't find anything else to try.
epoh said:
So... No idea what's happened, but today I can no longer sync my phone with my Win7 laptop. So far I've deleted the partnership on my phone & in the Windows Mobile Device Center (WMDC.) Then I uninstalled and reinstalled WMDC. The error I'm seeing in the Event Viewer:
I'm at a loss here. I've never had a problem syncing my phone before. I've been syncing it regularly with this laptop & my home pc for months. The only thing I've done lately is install CoPilot8.
I can see the M$ Windows Mobile Remote Adapter show up under 'Network Adapters' in the device manager. Should anything else show up? Any ideas? I've been reading up on this error message for ages now and nothing's working for me. I really don't want to do a hardreset, but I will if I can't find anything else to try.
Click to expand...
Click to collapse
This is the only thing I've found that might be relevant...according to the posts it seems to be caused by a conflicting driver issue, there's a solution suggested there that seemed to work for some...
http://social.microsoft.com/Forums/...c/thread/56e1b653-ec2a-48d8-9b2e-b6c95a2f2284
Good luck!
I saw that page.. nothing marked in Device Manager. I did remove the phone and the windows mobile remote adapter and reinstalled them both. Device manager updates appropriately when the phone is plugged in, but it's like active sync is broken. On the pc it will search for like 1 second, then go back to Not Connected, and on the phone I just see the into page in Active Sync "To syncronize your device..."
epoh said:
I saw that page.. nothing marked in Device Manager. I did remove the phone and the windows mobile remote adapter and reinstalled them both. Device manager updates appropriately when the phone is plugged in, but it's like active sync is broken. On the pc it will search for like 1 second, then go back to Not Connected, and on the phone I just see the into page in Active Sync "To syncronize your device..."
Click to expand...
Click to collapse
Darn, I had hoped that was one you hadn't stumbled across yet. The only other suggestion I might have is trying different ports on the PC, or a different cable maybe..? Sometimes when I'm using the cheap cable I keep at work for syncing, I have to reseat it a couple of times before ActiveSync will kick in and make the connection.
God I hate windows. I completely removed WMDC and the update to it, then rebooted. Reinstalled and now it's syncing. Good lord.
ETA: Is there a unix-based tool for syncing WM phones? I am seriously considering reloading this stupid laptop with Ubuntu.
Well hell. It got stuck while syncing, so I stopped it, disconnected and reconnected my phone, and now it's back to not connecting anymore. Grrr.
If its only happening on your work pc...
try disabling firewall and connectiong it... if that works... you will have to open some ports for mobile center(or activesync) to work with firewall turned on...
I didn't have a firewall on it, but god only know what the Enterprise McAfee was doing. I gave up on that stupid Windows load. Installed Ubuntu. It's sad when a non-windows OS is more reliable at talking to my Windows phone than Windows7.
hmm yea thats sad...
Hi. I'm running a TouchFLO 3.0 ROM tp2 from Tmobile. Recently, without reasonable cause, manila stopped launching on soft reset. The ONLY way I can get it to load every time I soft reset is opening file explorer, going to the windows folder [which takes a good 3 minutes to load], and launching manila.exe. I haven't added or removed any programs in over 2 weeks, and it started today. Any one have any ideas besides backing up and hard resetting?
EDIT: Everything's running sluggish too.
EDIT x2: And after manually launching manilla, I'm missing my task manager button in the upper right.
sounds like as good of a reason as any to back up your contacts etc and do a hard reset. Especially if the phones being sluggish
It won't connect through ActiveSync. How do I back up all that stuff?
either use PIM backup or Microsoft MyPhone
Those would both involve me connecting to the device to install the cab. Maybe someone could tell me why all of a sudden I can't connect to the device as well? It's almost like my device has a functionality virus. -.- There's never been a huge problem connecting before, but now it absolutely refuses. I keep getting the "To connect to this device, you need to have ActiveSync 4.5 installed" message, when I blatantly am running 4.5.
AlandisN said:
Those would both involve me connecting to the device to install the cab. Maybe someone could tell me why all of a sudden I can't connect to the device as well? It's almost like my device has a functionality virus. -.- There's never been a huge problem connecting before, but now it absolutely refuses. I keep getting the "To connect to this device, you need to have ActiveSync 4.5 installed" message, when I blatantly am running 4.5.
Click to expand...
Click to collapse
Think outside the box...use the phones wireless connection to do it or use bluetooth to connect with activesynch. This is an internet phone after all.
parleyp said:
Think outside the box...use the phones wireless connection to do it or use bluetooth to connect with activesynch. This is an internet phone after all.
Click to expand...
Click to collapse
How? I really have no idea.
EDIT: Nevermind. Emailing it to myself. Will it need to be connected to use PIMbackup or MyPhone?
use myphone... it can back up everything you need and stores it online... you can download the cab from the marketplace right on your phone. It uses your windows live account.
That said.. you can also transfer stuff on and off your sd card right to your computer no? By taking the card out and physically putting it in a memory card reader.
Myphone uses the data or wifi connection to back everything up. Pim doesn't just backs it all up to your sd card. Regardless I can only recommend what I myself use which is outlook or myphone and since outlook is a no go since you cant connect it via activsync for some reason I guess myphone is what I recommend.
good luck
Thanks for the help guys. All went well.
AlandisN said:
Thanks for the help guys. All went well.
Click to expand...
Click to collapse
Glad it worked out.
I really dont know why for the last two years Microsoft hasn't done anything for this very known issue. It seems they want all of us to use Microsoft My Phone service and put all out private data online.
The problem I am having is the following:
I am plugging my phone to the usb port using the original cable and if it detects the phone it will start syncing ...but this syncing will not actually start. The progress bar does not move.
Initially and for a couple of times after it synced fine. But then I got into this situation.
Of course like most of you know if I delete the partnership and make a new one it will work. But then what is the meaning of collecting data on TP2 when they will be deleted after making a new partnership....so there is no purpose of trying to sync if I have to make new partnerships once a while.
I have been trying aaaaalllllll the solutions mentioned in dozens of forums
ie:
unchecked faster data synchronization
checked if the right services are running
followed this procedure also [TUT] Dummies guide: updating HTC USB Sync Drivers
Checked my firewall settings, also disabled the firewall during sync.
disable third party firewalls and anti viruses
I have windows 7 ultimate 32bit, WMDC latest, and WM 6.5
I wish I could be proven wrong but I am sure that there is no solution to this problem. A 400euro operating system and a 500euro phone can not exchange information.
I have exactly the same problem (TP2 but running x64 windows 7). Did you manage to find any solution? Anybody?
Sverrs said:
I have exactly the same problem (TP2 but running x64 windows 7). Did you manage to find any solution? Anybody?
Click to expand...
Click to collapse
Start > Settings > Connections > USBtoPC
Uncheck "Enable faster data synchronization."
It works just fine for me on W7 Pro x64.
If that still isn't working, consider switching to a different sync option, like BirdieSync and Thunderbird. That's what I use normally. The only caveat is that you need to set up a new partnership each time you flash, which is the same on WMDC anyway, so not really a big deal.
krentzis said:
I really dont know why for the last two years Microsoft hasn't done anything for this very known issue. It seems they want all of us to use Microsoft My Phone service and put all out private data online.
The problem I am having is the following:
I am plugging my phone to the usb port using the original cable and if it detects the phone it will start syncing ...but this syncing will not actually start. The progress bar does not move.
Initially and for a couple of times after it synced fine. But then I got into this situation.
Of course like most of you know if I delete the partnership and make a new one it will work. But then what is the meaning of collecting data on TP2 when they will be deleted after making a new partnership....so there is no purpose of trying to sync if I have to make new partnerships once a while.
I have been trying aaaaalllllll the solutions mentioned in dozens of forums
ie:
unchecked faster data synchronization
checked if the right services are running
followed this procedure also [TUT] Dummies guide: updating HTC USB Sync Drivers
Checked my firewall settings, also disabled the firewall during sync.
disable third party firewalls and anti viruses
I have windows 7 ultimate 32bit, WMDC latest, and WM 6.5
I wish I could be proven wrong but I am sure that there is no solution to this problem. A 400euro operating system and a 500euro phone can not exchange information.
Click to expand...
Click to collapse
Sorry, I don't have a solution. I'm writing to say that I sync mine all the time with Win7 Pro x64, no problems at all.
I had a problem one time, and deleting the partnerships on the phone fixed it. Note that I do not sync emails or files; I don't use outlook for emails, only contacts and scheduling.
Have you tried doing a hard reset and then syncing the phone before you install anything else on the device?
I switched to 32 bit windows 7 and everything is ok now.
the only sync I can not do is through bluetooth.
the phone is freezing
krentzis said:
I switched to 32 bit windows 7 and everything is ok now.
the only sync I can not do is through bluetooth.
the phone is freezing
Click to expand...
Click to collapse
Perhaps the device itself is failing, then. If you are only able to sync with bluetooth, then it would seem likely that you would have a faulty USB port on the phone. Have you tried doing this with the stock ROM?
Win 7 64 bit
HTC TP2
Windows Mobile Device Center (WMDC)
I was just about to ask a question about the same problem, but I see a thread is started already.
I just built a new machine, and when I first plugged the phone in, everything worked great. WMDC recognized the phone, loaded the drivers, and it sync'ed with Outlook 10. Everyone was happy.
The next day when I plugged my phone in, Windows Mobile Device Center does not even recognize that the phone is plugged in. WMDC shows not connected, I don't get the little "ding" when it connects/disconnects, and it doesn't show up as anything under "computer" when I click on the libraries folder.
The ONLY solution I have found is doing a soft reset on my phone. When I do that, it sync's. But as soon as I disconnect it and reconnect it, I get the problem as described above.
I haven't done ANYTHING to try to troubleshoot this problem other than uncheck that box on the phone that allows the phone to fast sync. Any advice appreciated.
stevedebi said:
Sorry, I don't have a solution. I'm writing to say that I sync mine all the time with Win7 Pro x64, no problems at all.
I had a problem one time, and deleting the partnerships on the phone fixed it. Note that I do not sync emails or files; I don't use outlook for emails, only contacts and scheduling.
Have you tried doing a hard reset and then syncing the phone before you install anything else on the device?
Click to expand...
Click to collapse
How do you delete the partnerships as you describe?
ualdriver said:
How do you delete the partnerships as you describe?
Click to expand...
Click to collapse
Start WMDC > Mobile Device Settings > End a Partnership
cajunflavoredbob said:
Start WMDC > Mobile Device Settings > End a Partnership
Click to expand...
Click to collapse
Thanks Cajun!
no luck
stevedebi said:
Sorry, I don't have a solution. I'm writing to say that I sync mine all the time with Win7 Pro x64, no problems at all.
I had a problem one time, and deleting the partnerships on the phone fixed it. Note that I do not sync emails or files; I don't use outlook for emails, only contacts and scheduling.
Have you tried doing a hard reset and then syncing the phone before you install anything else on the device?
Click to expand...
Click to collapse
Yes I have tried that Im using Vista. Thing is the HTC do come up with progress bar on the phone. Way to weird and frustrating.
Now everthing is connected and its only when the tri colors on phone comes everthing disconnects then the HTC emblem is there showing progress as zero.
When I'm in the WMDC and setting up a partnership should I check any of the options.
ualdriver said:
Win 7 64 bit
HTC TP2
Windows Mobile Device Center (WMDC)
I was just about to ask a question about the same problem, but I see a thread is started already.
I just built a new machine, and when I first plugged the phone in, everything worked great. WMDC recognized the phone, loaded the drivers, and it sync'ed with Outlook 10. Everyone was happy.
The next day when I plugged my phone in, Windows Mobile Device Center does not even recognize that the phone is plugged in. WMDC shows not connected, I don't get the little "ding" when it connects/disconnects, and it doesn't show up as anything under "computer" when I click on the libraries folder.
The ONLY solution I have found is doing a soft reset on my phone. When I do that, it sync's. But as soon as I disconnect it and reconnect it, I get the problem as described above.
I haven't done ANYTHING to try to troubleshoot this problem other than uncheck that box on the phone that allows the phone to fast sync. Any advice appreciated.
Click to expand...
Click to collapse
Like many others I have not been able to sync my HTC TP2 with my new Windows 7 64 bit computer.
I found a fix that worked for me. After many attempts to sync my phone and WMDC showing me it is connected, but at the same time show an error icon with no explanation, I thought I would do a manual Windows update to ensure I had all the drivers needed. After going to START> CONTROL PANEL> REVIEW YOUR COMPUTERS STATUS....I noticed I had an message that said there was an update for my Pocket PC. I downloaded it and it was an file called "drvupdate-amd64.exe".
I connected my phone by a usb cable to my laptop and selected RUN on the above file after downloading it to my desktop. It showed a status that was updating a generic driver and one other drive.......then WAMO, WMDC opened and my HTC TP2 showed it was connected and started to Sync. YEHAW!