Develop Bugs

Stuck in ROM upgrade - quick help appreciated

So guys I've read every instruction carefully, and decided to install unsigned HardSPL on my Diamond.
What happened was that by the time I clicked 'yes' to run enterbootloader.exe on the phone, the PC has already displayed some error message about not being able to reach the phone, with an 'exit' button as the only possibility.
My phone is now hooked up to the PC, displays a black screen (with backlight on), but it seems that none of the processes related to HardSPL are running on my PC. Its been well past 10 minutes.
What do I do? Simply unplug the thing and push the reset button? Or has harm already been done? I truly hope not, since my PC hasnt uploaded a bit of data to the phone.

Well I got impatient and just pushed the damn reset button and it seems everything is in working order. Did I soil my pants. Anyway I think I'm gonna give up flashing as I see lots of people on here who followed instructions yet bricked their phones.

Hi Caius
Help can sometimes take a while before being answered.
Don't expect someone to answer your question within 10 minutes and then just drop the entire issue.
Now, one of the things I'm nissing in your story, is did you hook up with active sync?
and which file did you use to flash your phone?
otherwise, if you don't feel comfortable flashing your phone, don't.
your phone should be fun to have, and not be stress related.
(although I remember the rush I had the first time I flashed, fun fun fun)

If you look at the edit time, you can see it wasn't 10 minutes but 30
Anyway, yes I did hook up with active sync. Nevertheless, I'm not even sure if my phone is a CDMA or GSM one - I've heard that if I have a SIM card its gotta be GSM, but wikipedia says CDMA phones use a CSIM as well :S

ATT Tilt 2 went to red, green, blue, white screen; how can I flash a cooked Rom to it

Hi,
Right in the middle of use, my ATT Tilt 2 went to a basic, dead screen with red, green, blue, and white bars that says Rhod300 32m SS-BC, etc.
The operating system seems have gone down--it won't respond to anything. Hard reset produces the same results.
Can I flash a cooked or official Rom back onto this? I think activesynch is needed for a normal flash and of course I can't use active synch with the phone in this condition.
I think probably what I need is an original ROM install. Is this possible with a normal Windows 7 PC and a dead phone?
I have so many Windows Mobile programs and peripherals that I am trying to avoid going to Windows Phone at all costs--at least until they have basic stuff like file systems, a way to port over notes, etc. Also need a hard keyboard.
Right now using an older Fuze, which works, but is slower, worse screen, smaller, and lacks some of the features I like.
Thanks for your help.

You sound like you're in the bootloader mode. Tri-color screen.
You can flash from USB or from SD at that screen. I'd recommend trying to flash a stock ROM - as it flashes everything. Assuming that works, hopefully you can flash back whatever ROM you were on.
The phone isn't dead if you're at the tri-color screen. It should say 'serial' at the bottom - when you plug in your USB cable, it should say 'USB' and install some drivers. Then with the RUU software that comes with every ROM, you should be able to flash it.

Phone won't reboot--stuck on tricolored boot screen
Hi,
Thanks so much for replying. I appreciate you pros helping us novices.
Just after I posted the first note, I pulled the battery and hit the power button, it rebooted, and everything was still there in the OS--working fine. But whenever the device had to be rebooted, I would have the same problem of it getting stuck in the boot screen. After that, for the last several days once in awhile, randomly, it would finally reboot from the boot screen after I pulled the battery and hit the power button. The rest of the time (about 5/1) it would just sit there in the boot screen no matter what I did. The "Serial"/"USB" thing would change when I plugged it in, but that's all.
Thought it was the OS, so at a lucky moment where the "pull battery, hit power button" strategy actually worked, I installed the latest official HTC/ATT Rom--it's the next to last one issued that ends in .4.
It was gorgeous and I got all excited--started installing stuff thinking my problem was solved.
Had to reboot to install some programs--now it is stuck again on the boot screen. Tried 30x again--no luck with the "pull battery/hit power button"
strategy. Sometime it would flash a white screen really quickly saying something like "Can't read image!" before going into permanent boot screen. The boot screen will switch from "Serial" to "USB" if you connect it to the computer. So, the problem doesn't seem to be in the OS--rather, in the ability of the device to "read" the OS from the boot screen.
I would be grateful if you or anyone else may know what's going on here, and any ideas on how to fix it. Is there any manual way to get it to read the OS from the boot screen when that's not happening?
I have two guesses (both of which may be wrong):
1. It may be something in the hardware is just worn out and is less and less able to read the Rom--any ROM. I got the phone new off Amazon for a profit of $50 ($.01 cost plus a refund for an older phone) in the summer of 2010 when it was already outdated. and WP was replacing WM. I've certainly gotten my money's worth after 18 months!
Of course we now know that a brand new ROM has the same problem as the older one--which suggests to me it's in the hardware. I'm sure the new OS and the stuff I installed is still there on the phone, but something it appears is not reading something in order to allow the boot up.
2. I have a squirrely free program called Rax Reset (from Windows Mobile Marketplace) that does a software-based hard or soft reboot from inside the OS. The very last time the device went down and didn't come back up, I had used that program to soft reset it. Might have been a big mistake. Could this program be causing the problem? If so, just one reboot would allow me to get rid of it or even hard reset to remove everything but the new OS--but can't get it to boot.
If it turns out the phone is just worn out, I've certainly gotten my money's worth.
I still love WM even with all its problems--and especially the newer Sense version. If this one is shot, I'm thinking about just buying a new Touch Pro2 on Ebay to avoid all of the sacrifices and backwards steps involved with Windows Phone.
Thanks for any help anyone can provide.
Phil Butin

Why are you crossposting? I read this EXACT same post in a thread just below this, in the same section. That's pretty low.. Crossposting across forums isn't welcome, crossposting within forums IN THE SAME SECTION is definitely not welcome.
Don't do it again.

Sorry, just trying to get help
Sorry, just trying to get help, not that familiar with the rules.
I searched on "bootloader" and found a thread (wrote a comment there too), but it's old....
Here is the thread. It doesn't really provide any solution.
HomeArrow
Legacy & Low Activity DevicesArrow
HTC Rhodium: Touch Pro2, Tilt 2Arrow
Touch Pro2, Tilt 2 GeneralArrow
issues with bootloader.

Either way, whether you know the rules or not - why would you think copying and pasting the exact same words in the exact same forum help you any more...
Anyhoo, have you tried the usual? Flash stock? Sometimes I've heard you have to flash several times, I never really understood that logic tho.

I'll try to reinstall the HTC/ATT Sense OS again. I guess you're saying active synch doesn't need to be working in order to do that. I'm at work now--have to wait until i get home. Nothing to lose at this point.
But I'm seriously wondering whether the problem is the OS install or whether there is something in the device that is supposed to read the ROM and start the bootup that is just wearing out.
Thanks.

"No Image File"
The quick little flash of white screen has "No image file" in blue letters--goes by so fast you can hardly see it.

[email protected] said:
The quick little flash of white screen has "No image file" in blue letters--goes by so fast you can hardly see it.
Click to expand...
Click to collapse
That error message is 'normal'. Basically the phone checks the SD card for a file labeled "RHODIMG.nbh". If said file exists, it will flash from it. If no file exists, or no SD present - it continues loading bootloader and should say "Serial" at the bottom. This indicates that it's ready to be flashed. If you plug in your USB cable, it will install some drivers and then it should change to "USB" at the bottom instead of "Serial".
Now you should be ready to flash from a normal RUU. I would recommend flashing STOCK, because this flashes everything.
It might also be good to note a lot of people have experienced something similar - the phone getting "stuck" in bootloader mode, and only occasionally making it to WinMo. I'd guess it's failing hardware in some way shape or form, as none of my RHOD's or RAPH's have ever done this.

Good News--at least for now
Good news--I hooked it up to the computer with the USB cable for awhile and the Windows 7 computer did set up some drivers. For some reason after I disconnected it I reset it, and the reboot worked. Then I immediately uninstalled the squirrely reset program and removed it.
Everything I installed yesterday is working fine--I have soft reset it about 5 times now and each time it has rebooted. So I think maybe I'm back in business. Too soon to tell--but we will pray and keep our fingers crossed.
Thanks so much for your time and help. I don't know how to use the thanks meter but I would have if I could have.

[email protected] said:
Thanks so much for your time and help. I don't know how to use the thanks meter but I would have if I could have.
Click to expand...
Click to collapse
You're welcome. Basically if I or someone else posts something helpful, click the "Thanks" button under that post.

15 hours later, Tilt 2 is still working fine on the newly installed Sense OS. I have rebooted freely (using the stylus button on the side) since removing the program "Rax Reset," and everything seems to be going well. I'm keeping my fingers crossed, and will end my contributions to this thread with a warning about using "Rax Reset."
Thanks to all.

a very strange hard brick

Hi!
First of all i got AOKP + Franco kernel for 2w without any problem and I didn't change any option since last week.
This morning i rebooted it, it switched off and it didn't start again.
I cannot switch one my nexus again since then. I have always a black screen, also if I try to enter in download mode or in the recovery.
I tried to connect to my computer and smt times my laptop see a omap4400 (i'm not sure about the name) but after few second it disappears.
Tomorrow I'm going to the service center... But I have a big doubt:
What the hell happened this morning?
Thanks

Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
1. Download the zip file from http://forum.gsmhosting.com/vbb/f634...eeeee-1465412/, created by Legija
2. Extract zip to whatever location you're comfortable with (I used Android directory)
3. Open up Device Manager (Hold down Windows Key, press R, the type in devmgmt.msc and press OK)
4. Go to actions menu, select Add Legacy Hardware
5. Choose install manually, then have disk. Browse to where you extracted the zip, select the 'inf' file in usb_drv_windows
6. Choose OMAP, you'll get a popup if on Win 7, continue anyway (driver not signed)
7. Once completed with driver, pull battery out of phone, then plug it into USB
8. Double click omap4460_tuna_hs_pro.bat to start the process
9. Once completed, unplug from USB, put battery back in, and power-up!
10. Extra step - depending on what's been done, it may 'brick' again - suggest to do a restore or a wipe reinstall afterwards to be certain (mine bricked again next reboot)
Click to expand...
Click to collapse

biscuitownz said:
Remove the battery for 5 minutes and try again.
If that doesn't work,
Follow this guide:
Click to expand...
Click to collapse
This, if OP can't reach fastboot.
Sent from my i9250

I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****... I would be very curious as to an explanation as to WHY on earth this would happen. Very confusing.
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..

owlieowl said:
I'm having the exact same problem. I saw my phone at maybe 10% battery in the AM, said screw it and let it die, woke up this morning and plugged the phone in and nothing. No LED light, black screen, completely unresponsive. I've tried every trick in the book, and the only one that seemed to work marginally even was using a different battery, which got my phone to boot to the encryption screen, but then shut off again. It did that twice, and now both batteries are useless.
I used Legija's program to try and bring some life back to my gnex, even though it's not the international version, just in hopes of getting some of my data back (I have already started the replacement process with Verizon since the phone was insured), but I got no luck there either.
It's extremely disappointing and annoying to me that this phone survived all sorts of ROM installations (I was also using AOKP on 4.1 if someone wants to start making connections), reformatting, tweaking, almost every setting on that phone was modified by me.
Not only that but almost any software or hardware problem I did run into I could solve in maybe an hour, but I let my charge run out and the phone just up and bricks itself? Now, that's just bull****...
Not to hijack the thread, but my interest here is not restoring the phone to working condition but just seeing if I can pull my data off of it. I wouldn't even be posting here had I been able to have an SD card with my gnex, which I figured was unnecessary at the time I bought it since I knew the space on their was enough for me already, and the added branding of "Nexus" brand which had me under the impression it was maybe stable enough by itself. Not a mistake I'll make again..
Is it at all possible to get the data off of my phone at this point? At least partially? I believe encryption makes it impossible but I'm rather stubborn. Any help would be greatly appreciated..
Click to expand...
Click to collapse
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705

TomBall718 said:
So just to be clear... You've been able to get it to boot all the way up to the encryption screen, right? If so you should be able to get into fastboot (Holding down BOTH volume rockers and the power key.) From there you could relock/unlock the bootloader to do a full factory wipe which might solve your boot issue.
As far as the data loss from the wipe, you could then try this: http://forum.xda-developers.com/showthread.php?t=1994705
Click to expand...
Click to collapse
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..

owlieowl said:
I was able to get it to the encryption screen with my old battery that had a little bit of charge left in it twice, but it shut itself down on me both times. So now both batteries are useless.. I took it to the Verizon store hoping they would maybe try one of their batteries, but they just called customer service and told me they're just going to replace it at this point.
I have a feeling the charging mechanism is somehow damaged, because when I did get it to the encryption screen I had it plugged into a wall outlet and it wasn't charging at all. So, I can't turn the phone on whatsoever anymore.. if I could turn it on I could solve this problem... but it simply refuses to boot. The closest I came to interfacing with it was the OMAP Flash script, which did work, but didn't fix the problem.
So maybe if I could get the phone working enough to use ADB with it I could get my data back, but not even that seems possible..
Click to expand...
Click to collapse
If the phone isn't charging then there's something wrong with the USB port. One way to test that would be to use a battery charger. Also, try a different cable. I've had issues with a few different cables that for whatever reason started to not fit properly in the phone.
If you're USB port has gone bad then you'll need to either A) Always use an external battery charger. B) Get a replacement. C) Fix it yourself (Good guide here: http://www.ifixit.com/Guide/Repairi...+LTE)+Micro+USB+Charge+Port+&+Main+Mic/9641/1 )

[Q] SGT3-7" Boots up w/no logo and no pic (updated to kitkat 1 day previously)

Title pretty much says the basics.
Details however are as follows.
SM-T210R, Have had this unit for about a year, always been in a case, never dropped, not a scratch/dent/ding on it and I use it every day.
Past couple weeks I was getting update notification from Samsung, I'd always put it off till I got home then not bother when I actually got there.
Finally, a long weekend for me.. I let the update run its course, No problems (500+MB's) And I believe it was upgrade to Kitkat from Jellybean.
Can't remember the exact version details.
Soooo, I use my tablet throughout the day everything seems to work great NO problems at all.
Notice my battery is down to like 20-25% and plug it in (Original wall charger and cable)
Go to get it the next morning, open the case expecting it to flash and display my lock/swipe screen, Nothing.. Not TOTALLY Black, you can see theres still a glow.
The screen still responds to touches ( I can swipe to unlock it and hear the sound)
I tried to reset power. Nope nothing except I can hear the startup tune.
Tried hard reset, nope same thing.
Tried every button combo I could think of or contort my hands/feet into.. Nope no joy.
Hit the internet... read, read, read, read, watch videos, watch more videos..
Ah-ha take the back off, disco battery, wait, replug and voila.
Nope.. not the issue
Different milliamp chargers, nope.
WTF??
Normally I'd think I did something to it, but I did nothing that I hadn't done at least 200 times already.
I'm convinced Samsung F'd my tablet w/their update, not only that but my $1200.00 drone sits idle over my holiday because my vision app resides on my sgt3.
Ideas?

My best solution so far...
Well its been like 2 days since my sgt3 lost its mind.
Found a solution.
EVGA - Tegra Note 7. (No hyperlinks allowed for me....Yet)
nvidia.ca/object/evga-tegra-note-tablet
DAYUMMMMM.
This thing blows my SGT3 right off the map.
Still would like to find a REAL solution, there's alot of configurations on my SGT3.
But in the meantime I think this'll keep me almost content.
-D-

Just download odin and the firmware for you country and flash it if it gets stuck at the boot get in recvory and wipe and flash once more works a treat
sounds like a bad flash i never let over the air upgrades there trouble always use a pc
Ps take any memory cards out before flashing once booted and working replace memory card

jasonvoor1313 said:
Just download odin and the firmware for you country and flash it if it gets stuck at the boot get in recvory and wipe and flash once more works a treat
sounds like a bad flash i never let over the air upgrades there trouble always use a pc
Ps take any memory cards out before flashing once booted and working replace memory card
Click to expand...
Click to collapse
Thanks Jason, I've not messed w/flashing the firmware through pc on this thing yet.
I've done it w/psp's, motherboards, routers etc, but never w/one of my tabs.
Just to confirm... I dont need a display on my tablet to flash it w/Odin?

dimzin said:
Thanks Jason, I've not messed w/flashing the firmware through pc on this thing yet.
I've done it w/psp's, motherboards, routers etc, but never w/one of my tabs.
Just to confirm... I dont need a display on my tablet to flash it w/Odin?
Click to expand...
Click to collapse
No, you don't need the display on your Tab, you just need Kies and Odin on your PC.
Place your Tab in Downloadmode(VolDown+Home+Power,release All buttons when you see the warning, press VolUp) then choose your PDA firmware in Odin(Obtain firmware from SamMobile) an hit start. After this boot into recovery and wipe/factory reset your tab if it's not booting!
Good Luck
Greets Daniel

xDaniel91536 said:
No, you don't need the display on your Tab, you just need Kies and Odin on your PC.
Place your Tab in Downloadmode(VolDown+Home+Power,release All buttons when you see the warning, press VolUp) then choose your PDA firmware in Odin(Obtain firmware from SamMobile) an hit start. After this boot into recovery and wipe/factory reset your tab if it's not booting!
Good Luck
Greets Daniel
Click to expand...
Click to collapse
Hey Daniel, Thanks for the info.
I found Odin was pretty easy to flash with.
I've tried 4 different FW images for the GT3-7 and taken the unit (almost) completely apart w/the exception of removing the actual digitizer and the lcd.
Same results after each install though.
It boots, plays the boot sound, but no display.
I guess next step is removing the screen.. After that I don't know what to do except possibly getting myself a lcd replacement..
Just might drop it off to one of the local shops and get them to do it that way I won't wind up paying for something and f'ing it up.
No joy w/my sgt3..

Hey Daniel, Thanks for the info.
I found Odin was pretty easy to flash with.
I've tried 4 different FW images for the GT3-7 and taken the unit (almost) completely apart w/the exception of removing the actual digitizer and the lcd.
Same results after each install though.
Even went so far as to try Kies to do the last one.
It boots, plays the boot sound, but no display.
I guess next step is removing the screen.. After that I don't know what to do except possibly getting myself a lcd replacement..
Just might drop it off to one of the local shops and get them to do it that way I won't wind up paying for something and f'ing it up.
No joy w/my sgt3..

[Q] LS980-Cloudy G3 ROM- TWRP installed&accessible- [email protected] Android is Updating screen

[Q] LS980-Cloudy G3 ROM- TWRP installed&accessible- [email protected] Android is Updating screen
Hello everyone,
I would like to say first of all to the community, thank you for SHARING KNOWLEDGE. That is the key to everyone's success.
Now down to the gritty. My, now, I guess, mess of a LS980. For starters, the phone was running I would say very well considering my abuse. Big overclocks, gaming hardcore, and pushing the storage space hard. I performed a very easy and simple rooting and recovery program installation. If I remember properly, it all started with an app/.apk that sparked my interest with making the phone mine, was Autorec? (red roundish logo?) In some time I decided to install my first aftermarket ROM. I chose and installed without any issues , Cloudys G3 ROM. I cannot however remember the version number. It is by no means recent. I think I installed it last September so maybe 1.0 or 1.2 (sorry so much bad luck with stuff recently) TWRP version 2.7.0.0 is my recovery, and its functional. Unfortunately I do NOT have my apps backed up. I have no space. (just managed to get about 7GB on this PC to try to back them up but there is not external back up option, UNLESS you are OTG cable equipped I am not )
Now, I think, (this has been the state of the phone for about 3 weeks now) this all started to go south when I saw there was a Dorimanx OTA app in the play store. I used his Kernel for as long as I have had the G3 ROM installed. With no problems. So I figure this would be easier for me than button mashing trying to get into recovery mode without popping my screen out the front. LOL Upon using the app, I was informed of an update, I read the included information, and generally knew the deal. I allowed the app to download what it needed and restart and install like a good little computer. And this is where it gets a little grey for me in terms of order and symptoms. I remember checking the status of the install and it read failed! I looked into the reason why, and I was just plain full of junk. I then uninstalled painfully a bunch of rarely if that, used apps and gained back about 2.2GB of space. I ran Dorimanxs app again and let it do its thing and reboot. And again it reported fail! I looked into it more and noticed there were newer Kernels than available on his inter-web. Alpha versions. I located them on my device and rebooted into TWRP mode and selected , then flashed his 10.4.1 Kernel. Everything went fine. Phone reboots, the LG logo is no longer animated, and takes a bit longer to actually boot into a GUI. But it was, luckily.
So now, the phone would be a usable thing for about 3 minutes tops, before a power off, to a reboot. Which at first I didnt notice to be a boot loop. My battery surprisingly went from full to about 6% in no more than 15-20 minutes. I noticed the battery was getting warm like I was running the CPUs maxed under a serious load for a good half hour. Around the range to make someone pull it out their pocket wondering wth? So after the next reboot, power cycle, I jumped back into TWRP mode, and dug around for what I thought was the culprit, Xposed. I was having the worst time with my phone after a major Xposed framework error. I picked up my phone one day and out of the blue the xda framework was telling me that there were so many errors with it and my apps that ran fine, not being installed or activated. Upon looking into it, it was removed from the phone. I belive the order was , stable, 2.5/ 2.6, then I tried the beta 2.7. and thats the version that eventually , either broke, or uninstalled, I think, during those frequent Crashes! I tried to install the previous versions, even going back to the versions that came out last year like 2.4 . But none would install. And the phone grew more unstable in terms of its cooperation with its software. My normal apps and games worked fine. The phone worked the same, the music player, but there were apps that only can work with xposed that I utilize constantly, that were kaput. So I left the phone off. For a while. I had/have no time and really no resources to research and rescue a sunken ship. I come back about two weeks to it and I take a look around in the phones storage and hunt for any kind of recovery and disabler. I found xposed's disabler and flashed it. Same luck as before. About 3 minutes on, then dump.
I dig some more and found a ccc71 back up folder with some hearty backups that I didn't know were still there (no wonder I was always loosing space) and found another xposed installer.zip . I figured well , it didn't make any sense trying to disable something that wasnt enabled in the first place. (thats why I walk away and come back . fresh mind to tackle what stumps me) So I flashed the installed zip and reboot. Same thing, but now it started to loop around one minute. I power down. Found the recovery.zip that was saved on the beater PC and adb pushed it over the the phone. Im not good enough to adb install it. So TWRP'd it and rebooted, and d'oh! Now we just have the motionless LG ball, but flashing blue and green LED. And after about 2 minutes it would black screen, but be on. Not hung or anything. I connected to the PC, it never finds the right stuff but I used adb to verify state. And it said device. It still could communicate and push. I had it dump its debug, surprise! as it flashes that crap as fast as it can up the screen. But Im a PC guy so it was a fun, pause/break over and over till I found something useful. I saw some things that I could recognize like, failed starts, and longer than normal (for a speedy experience) function or call times, but nothing that slapped me with a red flag.
And that ended that nights attempts to fix thanks to the slowest no ram having box I was using to try to learn how to have the debug save to a .txt file on my PC so I could take a good look at the results.
Upon reading forum after forum, I came to something that looked promising, telling me that, that particular boot issue was due to the wrong radio being installed. So I hunted, and hunted, and laaaaaged my arse off and finally found it. Great I thought. Powered up ten or twenty times, finally get into TWRP, tried to flash it. BBBBBAAAAAANNNNT! nope. Downloaded another copy of the file and tried it again. No luck. ( I must say not until roaming around in these forums tonight did anyone bother to mention that you dont flash that radio. You instead have to inject it via LGFlashTool, which I have used before, and its a pain in the butt.
But before I go any farther, make anymore mistakes. I need some help.. I would really LOVE to be able to flash this , slap that, curse its name then hug it and get her working, without having to ditch my 492 apps. If I would have to say goodbye to happy times, I would like to say good riddance to ugly and annoying G3 ROM. I like not flat UI. My phone was depressing me every time I had to do any navigating around inside it. So I would love to go back to KK Stock LG ROM if push came to shove. But if possible I would just like to "repair, and regain access into the phones GUI system". So I could backup my apps. And eventually labor back to OEM Kitkat.
I apologize for the length of the post. But I just dont see the point of ping ponging with partial exchanges of information. I hope I have made my situation clear, and someone knows of someway, I can get my GUI/phone working again. Thanks to all in advance.
"a non functional smartphone, is an oxymoron"

Upgrade twrp to the blastagator last and dirty flash the same version of cloudy g3. And backup everything on the cloud. Mega give you a lot of free space.
_____________________________________Read more write less and be smart

strangely enough
siggey said:
Upgrade twrp to the blastagator last and dirty flash the same version of cloudy g3. And backup everything on the cloud. Mega give you a lot of free space.
_____________________________________Read more write less and be smart
Click to expand...
Click to collapse
strange thing,
just about 5 minutes ago, the phone, which I left on sitting at the LG screen by accident yesterday after posting the above, changed screens and presented me with the Launcher selection screen.
I immediately noticed that it looked wrong. Like if the resolution was way off. Like an old low res screen, very dull, sort of blurred looking.
I figured what the heck and tapped the screen and it of course did not immediately respond. It took its sweet time , about 30 seconds to show a change. The menu disappeared and a error message along the lines of , android system UI has crashed.
That is not the message verbatim, it was gone to fast for me to take it all in. And now its sitting at the blank powered on and repeating blue/green LED.
I havent done as you suggested yet. I kept getting results from Norway and other places and didnt understand a thing. But I found a TWRP update from Dorimanx, there was a link to it. And now I have to find my version of the OS. And to be clear, were you suggesting doing a re install, basically a file overwrite? And if so, when doing something like that, do you wipe the Dalvik cache ? Or do you just "dirty flash" it?
Thank you ,

I think that your screen is overheated. Never let the phone in bootloop for long time, it can destroy the screen.
About the cache, is better to clean it, but if I remember well the rom installer alredy do this.
_____________________________________Read more write less and be smart