There recently has been quite a bit of discussion and support questions pertaining to the Kaiser device on Warm Donut.
To keep these device specific discussions separated and organized we will use this as the official Kaiser support thread.
As I don't own a Kaiser device I will be relying heavily on this strong community for assistance
-----------------------------------------------------------------------------------
Warm Donut RLS 5 with Kaiser updates integrated including battery (Thanks Millence)
Warm Donut RLS 5 with Kaiser updates integrated Odex Repack (Thanks Millence)
RLS 4 Wifi update + Home Screen load time update for Kaiser (Thanks citrit)
androidupdate_WifiRL4_110.tar.zip
androidupdate_WifiRL4_150.tar.zip
androidupdate_WifiRL4_120.tar.zip
WiFi enabled SQSH files for Kaiser users: (Thanks to noside12123)
Warm Donut RLS 4 [03-16-2010] With Base DarkStar Theme
Warm Donut RLS 4 [03-16-2010] With BlackPaddy Theme
[email protected] optimized version of Warm Donut (Thanks to Millence [07-22-2010])
FAQ
Q: Why doesn't data work for me?
A: Try to add new APN, fill the MCC and MNC values with your operator values and try apn type as "default". More Info. (Thanks Hepe83 and candin1977)
Q: How do I get my battery level representing the correct value?
A: Thanks to huttonjd, a fix is available here
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Myn, thank you so much for your effort! I've been paying attention to your Vogue's thread for a long time. I really love to try the RLS4 but couldn't find the androidinstall.tar file, the one you referrenced to another thread is still the old RLS3, I know you updated the sqsh file to RLS4, but I want to install it by NAND, so could you tell me where to get the RLS4 install.tar file? Thank you so much again.
tommywoods said:
Myn, thank you so much for your effort! I've been paying attention to your Vogue's thread for a long time. I really love to try the RLS4 but couldn't find the androidinstall.tar file, the one you referrenced to another thread is still the old RLS3, I know you updated the sqsh file to RLS4, but I want to install it by NAND, so could you tell me where to get the RLS4 install.tar file? Thank you so much again.
Click to expand...
Click to collapse
Here you go:
Installation:
NoMoRootFS Instructions for SDCard:
Download either the 320x480 or 240x320 version
Backup! than, clear whatever "android" stuff you have from sdcard (I dont want it to get caught up in the install) especially your andboot folder
Extract contents of downloaded zip to temporary directory
Copy extracted /andboot folder to the ROOT of your SDCard
Run HaRET, than hit “run” to launch android
Press and hold center of dpad after hitting "run" and follow the directions in the NoMoRootFs menu system
NoMoRootFS Instructions for NAND:
Download either the 320x480 or 240x320 version
Extract contents of downloaded zip to temporary directory
Using the androidinstall.tar file follow the directions here
Classic SQSH method:
Download SQSH package
Backup! than, clear whatever "android" stuff you have from sdcard (I dont want it to get caught up in the install) especially your android folder
Extract contents of downloaded zip to temporary directory
Copy extracted /Android folder to the ROOT of your SDCard
Run HaRET, than hit “run” to launch android
Those screen shots are sexy, but how does it work or better yet what does? I don't understand how to get this installed into NAND.
Radio problems
I installed android and it moves fast. Quite impressed. The problem I see is the radio. I was not able to hear anything when placing calls. Also I configured the APN and it doesn't connect.
Could be a problem with my radio version. There is one recommended?
Regards
Candin
Great build Myn. Thanks for the hardwork Myn and all devs. I've been using it on my Kaiser for the last month or so.
Here's a quick summary of what works and doesn't work for me:
AT&T Tilt / 1.71.09 Radio
installed to NAND:
Latest NBH from here: http://ponack.net/poly/BT_Update/index.php?folder=S2Fpc2VyX05CSHM=
Myn's RLS 4
Wifi-update
Works:
Normal Sleep/Suspend
Calls/TXT
3G Data
Wifi
Kinda works:
Camera: works but really dark / yellow
Speakerphone: works but volume very quiet
Bluetooth: A2DP works but drop out after a few minutes, haven't tried hand free yet
GPS: works but lost signal and locks up often required reset
Overall the experience is very nice, just waiting to get all the hardware issues iron out
myn said:
There recently has been quite a bit of discussion and support questions pertaining to the Kaiser device on Warm Donut.
To keep these device specific discussions separated and organized we will use this as the official Kaiser support thread.
As I don't own a Kaiser device I will be relying heavily on this strong community for assistance
Click to expand...
Click to collapse
thanks so much!
great build. everything work ok, only wifi not work.
cannot download this link: http://download12.mediafire.com/oexjcwxglmxg/witgmzgkljw/myn-WarmDonut-03-16-2010-320x480-160.zip
the phone cannot sleep, anyone has the same problem?
hoatienii said:
great build. everything work ok, only wifi not work.
cannot download this link: http://download12.mediafire.com/oexjcwxglmxg/witgmzgkljw/myn-WarmDonut-03-16-2010-320x480-160.zip
Click to expand...
Click to collapse
Try it again now.
tommywoods said:
the phone cannot sleep, anyone has the same problem?
Click to expand...
Click to collapse
my phone everything work ok. only wifi have problem.
myn said:
Try it again now.
Click to expand...
Click to collapse
when phone sleep, i press power button to turn on, i want press any button to turn on, can you help me. sorry my bad English
hoatienii said:
when phone sleep, i press power button to turn on, i want press any button to turn on, can you help me. sorry my bad English
Click to expand...
Click to collapse
Power button to turn on from standby is the correct way of doing it. ANY button to wake from standby means that the device is not properly sleeping and will drain the battery much faster.
Thanks for this build
It is fast and stable but the wifi is not working (installed on SD Card haret)
appreciate your help in fixing the wifi
Hi Myn, this looks pretty cool, and I'm interested in possibly installing it to NAND. Can you recommend a particular Kaiser HardSPL and radio for maximum stability? I'm using jockyw2001 3.29 and At&t radio 1.65.21.18 now.
hoatienii said:
great build. everything work ok, only wifi not work.
cannot download this link: http://download12.mediafire.com/oexjcwxglmxg/witgmzgkljw/myn-WarmDonut-03-16-2010-320x480-160.zip
Click to expand...
Click to collapse
Try one of these for working Wifi. If you are using the 480 resolution then take the 150 version.
tonyc0642 said:
Hi Myn, this looks pretty cool, and I'm interested in possibly installing it to NAND. Can you recommend a particular Kaiser HardSPL and radio for maximum stability? I'm using jockyw2001 3.29 and At&t radio 1.65.21.18 now.
Click to expand...
Click to collapse
I have been using RL4 installed to NAND for about 2 weeks. My specifics are:
AT&T Tilt (Kais100) / 1.71.09 Radio
HardSPL 3.29 (I tried others but this base one works best for me)
Kaisimg-panel2-428-tilt-18-03-10.nbh from Dzo' site
I have most things working and working well.
- Phone works great, auto switches between 2G and 3G based on signal. This is great since my office has terrible coverage.
- Data works fine.
- Camera works but focus is manual and colors are a bit off (At least I think, I am color blind)
- Wifi works and is stable.
- Bluetooth works for phone and stereo on my Motorola T505. But after about 10 minutes the stereo stops working. A reset of the Bluetooth fixes this. Dzo seems to have a fix, waiting for a release from him for the Kaiser.
I hope this helps.
citrit said:
I have been using RL4 installed to NAND for about 2 weeks. My specifics are:
AT&T Tilt (Kais100) / 1.71.09 Radio
HardSPL 3.29 (I tried others but this base one works best for me)
Kaisimg-panel2-428-tilt-18-03-10.nbh from Dzo' site
I have most things working and working well.
- Phone works great, auto switches between 2G and 3G based on signal. This is great since my office has terrible coverage.
- Data works fine.
- Camera works but focus is manual and colors are a bit off (At least I think, I am color blind)
- Wifi works and is stable.
- Bluetooth works for phone and stereo on my Motorola T505. But after about 10 minutes the stereo stops working. A reset of the Bluetooth fixes this. Dzo seems to have a fix, waiting for a release from him for the Kaiser.
I hope this helps.
Click to expand...
Click to collapse
about battery? it work fine?
hoatienii said:
about battery? it work fine?
Click to expand...
Click to collapse
It is hard to say, I keep flashing and trying new things so my battery goes quick. But yesterday I made it through a whole day at work with bad reception and my battery was at 75%. This is a good day for Android so this versions battery usage is pretty good.
Related
Hi and welcome to my ROM thread. This is RC2 (release candidate 2) of my Snap based ROM for the Excalibur (Dash, Dopod, etc).
The XIP (kernel) and SYS (main system files) are directly ported from HTC newest handset, the Snap.
This ROM includes only the stock applications for now (with the exception of a few things, like omapclockset and celetask) as it's meant to be a community based ROM where we can ALL work together, chip in and make suggestions to make the fastest and best ROM for the Excalibur.
To activate the weather panel, use the Activate Weather.cab in the "\My documents" folder on the phone and reboot.
The pagepool is set at 8 megs (up from the stock 4) for better speed and general "snappiness". You can lower it yourself by using the pagepool_changer application on the ROM's nbh file. I like mine at 8 and could care less about available RAM as long as the phone is fast and responsive
I will add more as more feedback is provided, but for now let's test this first release and see how it performs I hope you like it.
-------------------------------------------------------
Release 52409
- Back to IE5
- Updated to SYS 21048
- Some graphics changes
- More I can't remember...
Release 50909
SetJogBar Added to Tweaks
HTC Reboot updated
Added support for Vista Device Center
Addes startup sound
Removed SQM modules
Clockontop 12 hour put in
Changeg some defauly jogbar settings (one being hiding the icon)
Pagepool changed back to 9 (give me feedback on this.. is the speed worth the decrease in RAM)?
Added IESettings in Settings
Added back Enterprise and VPN features
Added HTC Startup Sound
jogbar icon hidden now
IE6 is now in the ROM with lots more options to play with
Added SMS inbox threading to switch from classic/threaded under Tweaks
-------------------------------------------------------
Release 50709a
fixed commmmanager links on homescreen
fixed bluetooth and wifi problems
menu freezing issues gone
added back working htc album (thanks ookba)
updated celetask
updated htmlnote for sms issues
updated to 12 hour clockontop (thanks ookba < this guy know his stuff!)
changed htcoldboot to auto restarting type
-------------------------------------------------------
Release 42709
disabled tmail from starting up at boot
disabled sqmupload service (not necessary)
disabled connection setup download service
updated to JBed java
added basehue, the SMS tools pack, and celecommand
added clockontop am\pm version
-------------------------------------------------------
Release 42609
- Initial Release.
-------------------------------------------------------------------------------------------------------------------------------------
INSTRUCTIONS for flashing:
You can look at this great guide found here or you can follow my instructions below...
Hell, look at both to make sure you're doing this right!!
1. Run Auto.bat included in the archive. It should resent a black command prompt window.
2. Make sure you remove your storage card from the phone before the next steps.
3 .Follow the instructions in the black window. Do NOT reboot when the SDA unlocker tells you to reboot the phone. It's not necessary.
4. You might get a prompt asking you if you want to run the spl program. Just say yes. At that point you should get a white screen.
5. If for any reason you're not seeing a white screen, you did something wrong and you need to try again.
6. Flash the ROM following the instructions in the flashing utility.
You can expect the phone to be "stuck" on the green windows mobile screen for about 2 1/2 minutes the first time. After that, it should only take about 40-45 seconds for the phone to reboot.
INSTRUCTIONS for recovery in case something goes wrong:
Turn your phone completely off. While pushing the camera button, plug in your usb cable. The tricolor, bootloader screen will come up and you can flash your regular OEM ROM which can be downloaded from one of the stickies.
I recommend flashing the modified bootloader made by jockeyw2001. It's attached to the third post.
What it does is, it CID unlocks your phone, so you don't have to use the softSPL everytime you want to flash a ROM. It also makes recovery from a bad flash much easier, where you dont have to hunt for your original manufacturer's ROM to load in order to resurect the phone.
DOWNLOAD HERE
Post reserved for screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Post reserved for other downloads and addons
I recommend flashing the hacked bootloader attached to this post to make future flashings easier, as there will probably be many revisions to this ROM (depending on YOUR input).
NRGZ28 said:
Post reserved for screenshots
Click to expand...
Click to collapse
omg this rom looks beautiful i have to try it
s1l3nt said:
omg this rom looks beautiful i have to try it
Click to expand...
Click to collapse
OMG OMG! LOL
Try it and report bugs... as I'm sure we'll have some
Nice! Now if only my replacement battery would get here already!
Two questions... (1) what version of Java is it running, (2) does Innercircle work?
the transparency menu looks pretty slick!
Thanks a lot NRGZ28!!
For bringing a new life to S621!
Will test and report soon as I can...
Cheers,
Thanks NRGZ28 !
Can't wait to test it..
uansari1 said:
Nice! Now if only my replacement battery would get here already!
Two questions... (1) what version of Java is it running, (2) does Innercircle work?
Click to expand...
Click to collapse
Jeodek stock.. I know.. I'll change it in the next build
And yes, innercircle works
However YouTube and the Album don't... so we'll see about that :/
Tnx for this rom NRGZ28!
Just one things:
1) How about the clock into top bar? (into left of battery when i go into options....);
2) Can u add a CHOME Slim?
Tnx in advance for the answer!
I will add those if I can find them anymore. Anybody got a cab for the am/pm version of clockontop ?
Hi NRGZ,
I've been using your ROM's for a while, this looks fine, a couple of issues,
1- No bluetooth
2- Wifi doesn't work, wifiinit is on the startup but once you try to activate it hangs in there
This if you use the connection manager on the panel if you go to the start menu and use the connection manager it works fine both of them
Thanks for your hard work
Enrique
Sadly I don't have an operable phone to test at the moment... to those of you who have flashed... how does it run compared to the Rose roms?
good
its real good but there is one thing you cant add my favs anymore like 1.7 and other thing that we could add before from chome?????
few minutes after first flash and look...
Looks really great Boot fast, seeking network fast, ROM fast as hell
Settings>Phone>Band select didn't work
Frozen when Menu>Contacts>Add contact, after remove battery works fine.
After change HTC Panel to Sliding panel and restart, change back to HTC Panel in 5 min...
BTW seems to be great ROM
My Regards
Great Work
This is by far the most asthetically pleasing rom i have used yet. i have to use my phone for business so have already flashed back for now but i cant wait for the final realease ha. as for bugs the only ones i found were that streaming media had no visual when playing and i could not get a data conection when trying to use opera mini but ie worked fine.Oh and also i could not use the NRG rinku cab either just fyi.
Empel1960 said:
Hi NRGZ,
I've been using your ROM's for a while, this looks fine, a couple of issues,
1- No bluetooth
2- Wifi doesn't work, wifiinit is on the startup but once you try to activate it hangs in there
This if you use the connection manager on the panel if you go to the start menu and use the connection manager it works fine both of them
Thanks for your hard work
Enrique
Click to expand...
Click to collapse
I can replicate that.I can turn both bt and wifi on/off with both comm managers no problem. Although I don't recommend using the built in ugly, microsoft one. Use the HTC one on the Start menu
ikando2on2 said:
its real good but there is one thing you cant add my favs anymore like 1.7 and other thing that we could add before from chome?????
Click to expand...
Click to collapse
1.7 is one ROM, this is a completely DIFFERENT ROM... Thank you
It's not like I took their ROM and "remade" it. I made this from scratch
Adaho0 said:
few minutes after first flash and look...
Looks really great Boot fast, seeking network fast, ROM fast as hell
Settings>Phone>Band select didn't work
Frozen when Menu>Contacts>Add contact, after remove battery works fine.
After change HTC Panel to Sliding panel and restart, change back to HTC Panel in 5 min...
BTW seems to be great ROM
My Regards
Click to expand...
Click to collapse
Yeah, there's no band select because this isn't a 3G phone, so there's no bands to select really. I will remove that option in the next version
Flashing now. I'll report with any issues that I find. Looks great though.
Since you're taking input... is there any chance you could include BaseHue, Resco Explorer and the SMSToolPack? The first two I use extensively, and the SMSToolPack would just be a "nice to have" since we all love flashing ROMs so much.
Also, does the HTC Sliding Panel homescreen pull the panel icons from bronzeres.dll?
On a sidenote, I actually took a look at your ROMs for the Raphael and was floored. I'm not surprised to see such an aesthetically pleasing ROM find it's way to our phones.
WARNING!!!! SOMEONE (ME ALSO) LOST THE USE OF VOLUME BOTTONS AND CAMERA IN WINDOWS MOBILE AFTER TESTING THIS ANDROID VERSION, THE ONLY WAY TO SOLVE THE PROBLEM IS A HARD RESET, SINCE WE ARE STILL TRYING TO FIX THIS KIND OF PROBLEMS I SUGGEST YOU TO TRY IT ONLY IF YOU ARE READY TO A POSSIBLE HARD RESET!!!
REMEMBER: ALWAYS WAIT FOR WINDOWS MOBILE TO FINISH HIS BOOTING SEQUENCE BEFORE STARTING HARET.EXE, MIGHT BE THIS THE CAUSE OF THE PROBLEM
Screenshots in the second post (Thanks a lot aavan)
FAQ At 3rd post (thanks a lot Rizlo)
Here's the new Thread a lot of people asked for:
A new project is born to port Android on different htc devices with the same build.
A team of linux experts on #htc-linux is working hard to make it real and i'm trying to keep You updated with it.
Installation:
1- backup your data from yor sdcard to somewhere on your Computer (just to save pictures and music from accidents)
2- Format your sdcard fat32
3- download http://www.cobaltcode.com/fileupload/data/Android/AllInOne/Android-Donut-htclinux-15-11-09.7z (right click and save as) and unzip it in the root of your sdcard
4- copy /startup/blackstone.txt to the root of your sdcard and rename it startup.txt
5- Edit the startup.txt as u prefere (only if You know what You are doing, otherwise just leave it like You found it)
6- A new zimage avaiable here http://glemsom.anapnea.net/android/htc-msm-android/ (the one from Fri Nov 20 23:54:15 2009 +0100 ) unzip and put everything in the root of your sdcard rename the new zImage.20091120_235415 to zImage and u can delete the old modules-2.6.27-00593-g3890096.tar.gz
7- download http://www.cobaltcode.com/fileupload/data/Android/BuildUpdates/rootfs.img-15-11-09.7z unzip it and replace the old rootfs.img
This will fix the recharging problems
8- Go to Windows power settings and uncheck the "Auto adjust backlight" option.
9- Disable PIN on your Windows Mobile
10- run a file explorer and find in the root of your sdcard the file named Haret.exe and launch it
11- Test Android on your HD Blackstone and let us know every little thing to fix
You can contact the team or help us by joining #htc-linux on freenode irc network
Thanks to: phh, yeyoy, klinux, cr2, townkat, auss81, itchy8me and all the other people working on it on #htc-linux and of course You all testing and reporting
In this version:
--- Android 1.6
--- Accellerometer works
--- Bluetooth Works
--- Screen on/off works
--- Telephone, SMS system works (if your sms dont work try to read http://forum.xda-developers.com/showthread.php?t=433433 maybe u can fix it, anyway let us know if it works)
--- 3G works
--- Internet connection is finally fully controlled by Android and not from startup.txt so is supposed to be easier and working better
--- WiFi working (aparently only WPA2 is working propely)
--- Now power botton is "home botton" short press go to home, long press popup a menu of latest applications used
--- Recharging working
In the next release 3.5 jack entrance for normal Headphones will be fixed
Anyway phh give me the idea to "fix" the problem with turning on screen so hard and loong...
Is not really a fix but is a cheat
Download a terminal from the market or search for "Better Terminal" on google and copy the *.apk file u get into your sdcard in the directory /AndroidApps/ (if there's not that dir just create it) After booting u should find the application in your menu
type:
su
bash
echo 42 > /sys/power/wake_lock (remember to use the "spaces" between 42 and > and /sys...)
To revert the process just soft reset
this makes only the screen to sleep and not the system, makeing the screen faster to wake up, but it will affect your battery life.
It's your choice guys.
I hope we will fix it in next releases
For your knowledge you can visit and read http://wiki.xda-developers.com/index.php?pagename=RaphaelDonut
If You like our work Donate Here (phh)
Enjoy
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ
Q: If I run Android on my phone, will it wipe out Windows and erase my own brain too? I don't want to forget my mother's name.
A: No. Just soft-reset your device and you will get back to good ol' WinMo.
Q: So I can try out Android with no consequence at all?
A: Not exactly. There is a slight risk that your camera and/or your volume buttons stop working. A hard-reset will fix this anyway.
Q: My phone is stuck at boot, displaying "Waiting for SD Card". Should I commit suicide?
A: No son, just get out of your room and go buy yourself a Class 2 SD Card. Most Class 6 cards have been reported not to work.
Q: It boots! But I can't find a way to enter my SIM unlock code! What's wrong with my life?
A: Just boot Windows and disable the SIM lock. It doesn't work in Android, yet.
Q: My camera flash isn't working anymore
A: Ok, that was a joke. Got it.
Q: My battery lasts 15 seconds.
A: This is an early development stage, so the system is not really optimized for battery life. Uncheck auto-dimming in Windows and install toggledata in Android to save some power. Or keep the darn thing plugged to USB, for crying out loud.
Q: How can I setup my APN?
A: Go to Settings - Wireless controls - Mobile networks - Access Point Names; tap on your home button and on New APN.
Q: I set my APN but it doesn't connect! How can I live with the burden of this endless pain?
A: Reboot and restart Haret. Or try and fondle with the airplane mode, sometimes it works.
Q: I can receive SMS messages but I cannot send any.
A: Known issue, it may be network related. Try this workaround http://forum.xda-developers.com/showthread.php?t=433433 . Guy who posts this for the 10000th time doesn't win any prize.
Q: I can receive SMS messages but I cannot send any.
A: I said...
Q: I enabled WIFI but it's not connecting.
A: Try rebooting again. Also, it's been widely reported that it won't work on WEP protected networks, switching to WPA2 could solve the problem.
Q: When my phone goes to sleep mode there seems to be no way to bring it up again. Is it dead?
A: Press the power button. Again. And again. And again andagain andaggggain. Be patient, it will come up eventually.
Q: Android 2.0 is out!
A: We KNOW. Listen and repeat. WE KNOW. But devs are working on 1.6 for now, and getting that to fully work is their goal at the moment.
Q: Why can't we have the Hero skin on our device?
A: This is not really related to making Android work on the HD but anyway... that UI is designed for lower resolution phones. Go on a general Android forum for this kind of things.
Q: Is it gonna rain today?
A: I have to admit it's quite cloudy.
gogo mitikos
Testing time...
thanks
cobalt file
High, like to test, loved the tux version.
But when i try to download the cobalt file there is only a lot of text but no file to download, is it corrupted or is ther an other way to get it.
Hope you can help me
pbotloh said:
High, like to test, loved the tux version.
But when i try to download the cobalt file there is only a lot of text but no file to download, is it corrupted or is ther an other way to get it.
Hope you can help me
Click to expand...
Click to collapse
I am getting the same issue here
pbotloh said:
High, like to test, loved the tux version.
But when i try to download the cobalt file there is only a lot of text but no file to download, is it corrupted or is ther an other way to get it.
Hope you can help me
Click to expand...
Click to collapse
Right click and "save as..." option
Now i edit the first post
Ok, testing it
New life for the project!
Thanks Mitikos! Thanks htc-linux guys!
sternas said:
Testing time...
Click to expand...
Click to collapse
sorry I can't download the file, help me tanks
On page 1 - right click the link and save link as 'done'
Help
Why "Waiting for SD card" ?
Is my first time to Android linux.
mitikos i've built a .zip with tuxfiles and phh kernel/donut with startup.txt already fixed for blackstone, uploading right now so we have a complete package with everything we need.
If anyone can download it and make a mirror that'll be great, oh and maybe give it a try so we're sure it works, on my phone is working great.
Partial test: this relese is more stable, smoother, and more responsive than Tux' 0.2........
Now, finally, I can resume the LCD on by simply holding the power button......
Bluetooth is active now, but I not tested it yet
APN is now configurable without modifing the startup file, but at the moment I'm not able to start a data session...... maybe my operator WIND?
Screen rotation is fully active but not for the home.
Wifi not yet tested, but I know is still in development.
auss81 for me wind italy connection is working, just create a new apn in the wireless config and put internet.wind as apn, but i've configured it also in the startup.txt, have to try w/o it.
[email protected] said:
mitikos i've built a .zip with tuxfiles and phh kernel/donut with startup.txt already fixed for blackstone, uploading right now so we have a complete package with everything we need.
If anyone can download it and make a mirror that'll be great, oh and maybe give it a try so we're sure it works, on my phone is working great.
Click to expand...
Click to collapse
Great work. I was going to make that suggestion.
It's way better to have the same starting package in order to test and check possible issues.
anyone else getting random lockups?
I'm also having problems with turning the screen on again after changed the end button behaviour to make the device sleep. Only a soft reset makes it usable.
Otherwise this is a huge step forward in terms of functionality. Good work to all those involved
[email protected] said:
mitikos i've built a .zip with tuxfiles and phh kernel/donut with startup.txt already fixed for blackstone, uploading right now so we have a complete package with everything we need.
If anyone can download it and make a mirror that'll be great, oh and maybe give it a try so we're sure it works, on my phone is working great.
Click to expand...
Click to collapse
That's great and make all more simple. Give me the addres and i put it on the first page.
Anyway a new version is coming next week i think, than You will have to update the link
wvernon said:
anyone else getting random lockups?
I'm also having problems with turning the screen on again after changed the end button behaviour to make the device sleep. Only a soft reset makes it usable.
Otherwise this is a huge step forward in terms of functionality. Good work to all those involved
Click to expand...
Click to collapse
Yes i know the turning on screen sometimes is laggy, but is just couse the phone goes in deep sleep, so u hqave to press the bottons many times to weak it up. We will fix it in the newer versions for sure. You dont need to soft reset, just be patient, press the bottons and he's coming back for sure.
I'm no longer updating this! All of the new changes have been pushed to the atools version. L1q1d is going to be taking over from here on out so check out his thread HERE.
Here's an editor to select which settings you want for your nbh!
All this does is hex edit different things, including the cmdline info, like you could do with a hex editor. It's just a lot more user friendly.
Disclaimer:
I'm not responsible for ANYTHING that happens to you, your phone, or your computer. I would not release something that intentionally harms a computer or phone, but there's always that chance when using unofficial software.
______________________________________________________________________________________________________________________________________
What everything means:Device:
-Vogue: LINK
-Kaiser: LINK
-Polaris: LINK
Resolution:
-240x320: The native resolution on these devices. Will give the best overall picture quality.
-320x428: The smaller version of the 320x480 that fits our screens better.
-320x480: The native resolution for the G1 and most 1st gen Android devices. Things will fit better as they aren't scaled down, but everything will look blurry/squished.
Version:
-This is the Android version. Be careful not to get it mixed up with a user's release version. Most builds say either Donut, Eclair, or Froyo, but if not then you can install the system and look under Settings>About Phone and look under "Android Version"
-Donut: 1.6
-Eclair: 2.1
-Froyo: 2.2
Panel Type:
-Only Vogues have auto panel detection, so for Kaiser and Polaris users you will just have to pick one. If there's weird pixels, things don't look right, sleeping issues try a different panel.
Keyboard Types:
-Look HERE for more info if you don't know which keyboard type.
More Settings:
-ppp.nostart: If you set this to 1 it should prevent data from starting on boot. Helpful for some people but if you don't have to worry about data then leave it 0.
-CPU Overclock: This uses the same method that myn uses with Rogue Tools. Our CPU's are set to run at 400 MHz, but we can overclock them to over 500 MHz. I would suggest not going over 500 unless you know what you're doing, but some users have reported running at 550 just fine. It could decrease your device's life expectancy if using constantly, but probably won't notice for quite some time.
-System/Data Partitions: You can use this if running system or data off an EXT2 partition to use all of nand. Also helps when using an older Sense build that needed a larger system partition.
-Disable Vibrate on boot: Check THIS POST for more info on that.
-Battery Capacity: Self explanatory.
______________________________________________________________________________________________________________________________________
How to use the Editor:
WINDOWS, MAC, LINUX:
1. Download python (Version 2.7)
2. Download editor from below.
3. Download the nbh for your phone
a. from DZO's SITE
b. Download the latest one using the editor
4. Open the NBH from the editor
5. Change any settings
6. Save new NBH
7. Enjoy your new nbh
Don't want to install python?
1. Download Windows NBH Editor.zip from below
2. Extract to where you'd like
3. Run nbheditor.exe
Last but not least... Thanks! I've said it all before but this wouldn't be possible without the mighty one, DZO. Thanks to DZO, kallt_kaffe, myn and l1q1d for pointers, and all the other devs that are helping get these what should have been extinct devices back to life!
To Do:
Taking suggestions!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Windows NBH Editor.zip
UPDATES
DOWNLOAD!!!(Right Click>Save As...)
loserskater said:
(I spoke with kallt_kaffe and his will probably work soon.)
Click to expand...
Click to collapse
I've posted new a new version that should be compatible but when I change an NBH (Kaiser) to donut the hw3d.version becomes 01 and the "1" overwrites the space what should be after the "0". Setting an NBH to eclair seems to work though. Haven't tried the same with DZO's NBH though but the result should be the same.
kallt_kaffe said:
I've posted new a new version that should be compatible but when I change an NBH (Kaiser) to donut the hw3d.version becomes 01 and the "1" overwrites the space what should be after the "0". Setting an NBH to eclair seems to work though. Haven't tried the same with DZO's NBH though but the result should be the same.
Click to expand...
Click to collapse
Thank you! New zip should have it working now.
loserskater said:
Thank you! New zip should have it working now.
Click to expand...
Click to collapse
Confirmed, seems to work now.
OK, so how easy was THAT?.. Thanks!
New version posted. Now just one program.
You still need to select the NBH for your device.
Excellent work dude, truly the most useful pre-install software, makes setting up everything so easy, intuitive to use too.
Hi Loserskater,
Thanks for your very good job and to help us to use much better our phone with android
Cheers.
loserskater said:
The moment you've all been waiting for... ok, well maybe just a few of you. Here's an editor to select which settings you want for your nbh!
Click to expand...
Click to collapse
Can you also include battery setting (option: experimental) ?
robuser007 said:
Can you also include battery setting (option: experimental) ?
Click to expand...
Click to collapse
That's something DZO will have to do... unfortunately you can't add things to the cmdline of the nbh or else it wont work right. it will have to be added to the source. If I can convince dzo to add it, I will add the option to change that value for other batteries. For now, you can try kallt_kaffe's nbh.
His also work with this editor
loserskater said:
That's something DZO will have to do... unfortunately you can't add things to the cmdline of the nbh or else it wont work right. it will have to be added to the source. If I can convince dzo to add it, I will add the option to change that value for other batteries. For now, you can try kallt_kaffe's nbh.
His also work with this editor
Click to expand...
Click to collapse
Scratch that. New update now includes ability to add default settings (like in kallt_kaffe's) for battery, clock, and ppp.nostart. I just flashed successfully but I haven't had much time to test.
Can now use either kaiser nbh or the vogue nbh.
Hi guys,
Sorry... I might have miss it.
Can someone explain what is the panel different?
I am using HTC Kaiser.
Thanks
Daniel
Re: Loser's NBH Editor v3.0
It just depends what panel you have. The only way to tell is by trying each one. If you get weird pixels then thats the wrong one. I havent found any difference between panel 2 and 3 though...
Apparently there are some differences in the way panel 2 and 3 handle power on, power off, there have been a few reports of white streaks on waking up the lcd by some users on panel 3 using panel 2 settings.
This is not definitive though, since panel3 seems to be pretty rare.
You could set other default settings, like panel2 (most used I guess), I never tried another panel.And eclair for the other default setting (most used nowadays I guess).
Maybe you can add comments (like use 1.7x radio and hardspl 3.34 before flashing and use kernel from...) to make it completly idiot proof (and have less questions here on the forums).
Great work anyway.
Re: Loser's NBH Editor v3.0
You could set other default settings, like panel2 (most used I guess), I never tried another panel.And eclair for the other default setting (most used nowadays I guess).
Maybe you can add comments (like use 1.7x radio and hardspl 3.34 before flashing and use kernel from...) to make it completly idiot proof (and have less questions here on the forums).
Great work anyway.
Click to expand...
Click to collapse
That's a good idea. I'll change those settings to the commonly used ones and maybe save settings on exit so you don't have to do it each time. And add more info in the actual program. Thanks for the input!
Probably will try with Panel 2. I am using the SD boot with Eclair right now.
Re: Loser's NBH Editor v3.1
What would be some things that people would like to see added to this? I was thinking about making it possible to change cpu and gpu OC settings. And maybe battery settings. Can anybody think of any other cmdline settings?
I don't have any suggestions, just wanted to say thanks for the great app. Very convenient.
[04JAN][TMOUS]CMYLXGO's Stripped & Squashed Stock Desire HD[KERNEL:gauner1986][RMNET]
-= CMYLXGO's Stripped & Squashed Stock Desire HD ROM =-
Build v.1.2 [Kernel: gauner1986]
THIS IS FOR T-MOBILE AND WWE
http://hotfile.com/dl/94262398/930083a/CMYLXGOs.Desire.HD.NAND.Edition.v1.2n.7z.html
This is a NAND build and will require MAGLDR.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-= ALL T-MOBILE APPS WORK OUT OF THE BOX INCLUDING MMS =-
1. Download MAGLDR 1.11
2. Download CMYLXGOs.Desire.HD.NAND.Edition.v1.2n.7z from link above and extract
3. Install MAGLDR. Either put phone in bootloader mode or boot into Windows Mobile. Run ROMUpdateUtility.exe from MAGLDR folder.
4. Boot Phone and select in the menu "4. USB Flasher"
5. Run DAF.exe on your computer from my ROM download.
6. Once flashing is done the phone will reboot.
7. Phone should boot directly to Android in NAND.
What's Not Working:
WiFi MAC is fixed to 00:11:22:33:44:55
Bluetooth MAC is fixed to 50:C3:00:00:00:00
720p recording
WiFi MAC Address Workaround:
Must have Android Developer Kit installed
1. adb pull /system/etc/calibartion
2. open calibration file with wordpad. Not notepad.
3. change the line that says macaddr=00:11:22:33:44:55 to either your real mac or just increment the last digit
4. save file and close
5. adb push calibration /system/etc
6. reboot phone
You can verify that the mac has changed by going to Settings --> About phone --> Hardware information
Click to expand...
Click to collapse
Thanks to the DarkForceTeam for making this possible
Thanks to gauner1986 for the kernel
Thanks to HTC for the Desire HD base
Thanks to lesjaw for the nudge in the right direction for cooking
Thanks to dung8604 for the link to SuperOneClick for root work around
To Do List...
- Install a Default Sound Set so Email Alerts work
- Update taskbar icons to a more generic style to work with my Skin Packs
- Load BlueTopia, GreenTopia, RedTopia, and YellowTopia Skins
- Remove other skins - Can be downloaded via HTC Hub
- Fix Bluetooth MAC issue
- Fix WiFi MAC issue
- Update Market
- Update gMail
- Update Facebook
- Added ES File Explorer
- Add T-Mobile Visual Voicemail
- Subtle Custom animation and splash screen. Close to stock but lets you know its Pimp'd by CMYLXGO
Change Log...
v1.2
- Fixed Root
v1.1
- Added News reader widget
- Added HTC Location widget
- Root should be fixed
- Minor tweak to system files and settings
- Squashed system files
- Some other fixes I can't remember
v0.1:
Initial Release
To obtain root on build v1.1n please use SuperOneClick v1.5.5
http://forum.xda-developers.com/showthread.php?t=803682
garymr2 said:
I just tried it...here is what I do
1. Make sure SD is unmount
2. open Superclick v1.5.5
3. select 'unroot', you will see the command line keep going and then keep looping
saying cannot re-mount the read access....
4. Ignore that looping message, restart your phone, and kill Superclick
5. Wait until phone boot up, unmount SD card again
6. open superclick and select 'root' this time, you just see a popup saying your phone is rooted.
7. i did the 'shell root' and then 'allow non-market apps' also.
8. Remount SD card.
9 Wala....open titaniumbackup and it works....
Hope this work for everyone...
Click to expand...
Click to collapse
Thanks! been waiting for this! will try and report!
great will give it a try and report
Remeber guys...this is just a base to get the T-Mobile US crowd up and running. I am working on a BlueTopia NAND and will post it shortly...but before I get knee deep into Topiaizing it I want to find a stable base.
The most important feedback I am looking for is related to data drops. I am doing something differnt in this build that I have not done in any of my others. It's not really anything top secret but don't want to let the cat out of the bag just yet cause some people may form a bias opinion.
Happy Flashing...and Merry New Year!
-CMYLXGO
cmylxgo said:
Remeber guys...this is just a base to get the T-Mobile US crowd up and running. I am working on a BlueTopia NAND and will post it shortly...but before I get knee deep into Topiaizing it I want to find a stable base.
The most important feedback I am looking for is related to data drops. I am doing something differnt in this build that I have not done in any of my others. It's not really anything top secret but don't want to let the cat out of the bag just yet cause some people may form a bias opinion.
Happy Flashing...and Merry New Year!
-CMYLXGO
Click to expand...
Click to collapse
Nice dude! Downloading now. Will report back. Just wondering if this is using RMNET or if you set PPP as default?
Sent from my HTC HD2 using XDA App
I love me some xda devs!
downloading nooooowwww!!!!
BBL to report.
Well the nand flash went like pie ... easy peasy.
The build felt sluggish for me, problem was powersaver.
Many thanks dude - Good work!
Finally seemed too unstable for me, changed to MDJ in sig.
Updated: It's up and running.... Data Wifi and 3G seem to be working fine. Market download is fast. Before installing any application, original storage is 650MB available Will spend more time to test it. First impression: very smooth.
Downloading and will report back. For future ROM, would you consider leaving the TMobile stuff out (my account and visual voicemail)? we can always download those from the market. Thanks
Htc Loacations and News
Does this build have HTC locations and HTC news ?
wow!!! very quick work! Downloading now and I will report back...
Great! Will try this on.
Thanks!
Btw, how to root it??
Is the MMS going to work correctly (non-blurry pics) like usual for us US people CMYLXGO?
Instead...saying Oh Great, That is Fast, Please keep these comments to yourself, I think you can use the THANK YOU button to actually say thanks. Try it first, and then get back and write a Review. As to what is working, and what is not working....and As well you may kindly suggest to the Dev as to what you want...Plz lets keep this thing clean, so we don't waste time looking for information, or looking up for the answers.
Thanks
is it too big to be installd on normal hd2
Anyone else having issues with not having root access?
hoss_n2 said:
is it too big to be installd on normal hd2
Click to expand...
Click to collapse
Are you using an international Leo on T-Mobile network? Otherwise:
cmylxgo said:
THIS IS FOR T-MOBILE US PHONES ONLY
Click to expand...
Click to collapse
when its for tmous, why isnt it in leo usa forum?
Rmnet kernel right?
Sent from my HTC HD2 using XDA App
still blurry mms pics, fellas?
simax said:
when its for tmous, why isnt it in leo usa forum?
Click to expand...
Click to collapse
US LEO doesn't have an Android sub-section?
FROYO x RED CAMERA 2011.02.24 FOR BLACKSTONE
I'M STILL UPDATING THIS THREAD FOR NEW BUILD
THANKS TO neopeek AND midnight FOR THIS
First off, there is an insanely huge list of guys who are responsible for making this possible.
Thanks to phhusson, dbz, Stinebd, ACL, arrrghhh , viruscrazy, WisTilt2, Klinux, kama, Reefermattness, chkms, davidebeatrice, elroy944, kstephens98, DracoLX, zenulator, Chamonix, Makkonen, Mrpippy, cr2, Markinus, Babijoee and anyone else forgotten!. I WILL ADD MORE
Thanks to those who have already helped, and to those who will. THANK YOU!
THANKS TO F22 FOR HIS KERNELS
THANKS TO VIRUSCRAZY FOR HIS CAMERA KERNELS
THANKS TO Stickman89 FOR HIS Latest Rootfs + Corrected key mapping for Blackstone
GUYS, I'M NOT A DEV. I JUST HELPING PEOPLE.
FROYO X RED CAMERA 2011.02.24 FOR BLACKSTONE
CHANGE LOG
0- MMS SHOULD WORK FOR GSM
1-MOD BUILD.PROP
2-better gps and location.
3-add it Japanese IME. make sure to unchecked Japanese IME in setting to English (language & keyboard setting)
4-wifi works
5-modprobe ipv6 support. add it ko driver to modules for support
6- zeam launcher
7-add it (rm -f /sdcard/*.rec) to the froyo.user.conf. you will not see those FSCK files any more in wm
8-auto backlight for keyboard. need to change kernels camera, 1250 or 1253
9- speaker phone. need to change kernels camera, 1250 or 1253
10-new market
APPS
1-ASTRO
2-BROWSER
3-CALCULATOR
4-CALENDAR
5-CAMERA.APK
6-CAR HOME
7-CLOCK
8-CONTACTS
9-DEV TOOLS
10-EMAIL
11-GALLERY
12-GMAIL
13-MAPS.
14-NEW MARKET
15-MARKET ENABLER
16-MESSAGING
17-MORELOCALE 2
18-MUSIC
19-GENIE WIDGET
20-SETTINGS
21-SPARE PARTS
22-SPEECH RECORDER
23-SUPERUSER
24-TALK
25-TAPATALK PRO
26-TITANIUM BACKUP
27-VOICE
28-VOICE DIALER
29-VOICE SEARCH
30-WIRELESS TETHER
31-YOUTUBE.
NOT WORKING IN THIS BUILD
1-Bluetooth- still working on this. not working on rhod. please try for you phones
2-3.5mm headset jack
3-Notification LED-doesn't notify, but just outputs whether device is in sleep or active
PREPARE YOUR SD CARD
1-FORMAT YOUR SD CARD TO FAT32. FULL FORMAT
2-DOWNLOAD FROYO X
3-UNZIP IT INTO YOUR SD CARD. ANDBOOT OR TO ROOT SD CARD
4-USE YOUR STARTUP.TXT FOR YOUR DEVICES. ADD THIS COMMAND YOUR STARTUP. rel_path=andboot. OR WITH YOU PUT EVERTHING ON YOUR ROOT SD CARD YOU DON'T NEED TO ADD THIS TO YOUR STARTUP.TXT
5- for cdma devices. add this command for the camera on your startup. board-htcrhodium.is_cdma=1
for gsm devices. add this command for the camera on your startup. board-htcrhodium.is_gsm=0.
FOR CDMA PHONES. REMOVE THE SIM CARD
6- for cdma & gsm devices make sure you have this command on your startup for data. force_cdma=1. for gsm devices is force_cdma=0
THINGS YOU NEED
Current Kernel Builds
http://glemsom.users.anapnea.net/android2/htc-msm-linux/
Current rootfs Builds
http://files.xdandroid.com/rootfs/
Current initrd.gz Builds
http://files.xdandroid.com/initramfs/
Frequently Asked Questions
http://sites.google.com/site/androidport/faq
FROYO x RED camera Install
THANKS TO bassiebal
So I noticed there wasnt any tutorial on how to install it and you just had to search all the posts in the froyo x thread to figure it out. Now I have done it this way.Im sure there are tons of other ways.But this one workes for me and I just want to share it. I will try to keep it up to date so everybody can install android on their blackstone.
All credits to Tiad8 and other developers this is not my build!
special thanks to TRNSLN who helped me install froyo so I can help you
Anyway first things first. Is this something for me to use daily? well here is your change to figure out.
My homescreen+menu+latitude
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
proof the camera works
Sample video(shot with blackstone)
[http://www.youtube.com/watch?feature=player_detailpage&v=OrYAP99pZI4][/YOUTUBE]
screenshot camera app:
sample photo(shot with blackstone) click http://img814.imageshack.us/img814/6485/img20110224231634.jpg for full image
So is this something for you?
whats working and whats not?
wifi/3G/sync =Ok!
market =Ok!
latitude =Ok!
Headphones =Ok!
messaging/calling(call/receive) =Ok!
Bluetooth =testing..
Battery =10/11 hour
Usb =No (at least not with standard app, there have been reports of usb via other program havent tested it yet)
Chapters of this tutorial:
[1]Formatting SD card
[2]Installing Froyo X red
[3]Installing Camera
[4]Finishing up
Downloads
1 Froyo X Red http://www.multiupload.com/16UTFCYLTA
2 kernel+libs http://www.multiupload.com/YGVM8VELPV
3 Haret+Startup.txt-Ts-Calibration http://www.multiupload.com/33Z52W8L14
4 If having problems with booting android try this startup.txt
[1]Formatting SD card
Easy as pie.
put your memory card in a sd card reader (your blackstone will do fine) and plug it in your pc/laptop.
open My pc and look for your memory card and right click on it.
Click Format
http://img37.imageshack.us/img37/3646/16774455.png
Ok great Sd card is formatted and ready to go. no lets move on..
[2]Installing froyo X Red /B]
ok first things first download Froyo X Red and Haret+Startup.txt-Ts-Calibration.
Then unpack Froyo X Red to the root of your memory card(root means on your memory card not in an folder on your memory card)
Then open up Haret+Startup.txt-Ts-Calibration and copy all the files to the root of your memory card.
Now unmount your Blackstone or Sd card reader from your pc.Put the Sd card in your blackstone(if it isnt already there) navigate to your storage card and open the file Haret
Now it shoud just give you a bunch of text and a little linux penguin let it load for a while(note: It coud take some minutes so dont think it wont boot)
it shoud boot. now follow the set-up and sync your google account.then turn off your blackstone and reboot it.so it boots in windows mobile again.when its in windows mobile go to the next step!
[3]Installing Camera
so android working accordingly everything set up but still no camera..
its time to change that
download kernel+libs
simply unpack the zip to your memory card..
overwrite zImage
thats that your done. enjoy android with working camera!
[4]Finishing up
this isnt really a neccesary step but I do recommend it.
open up spare parts and set the Window animation and Transition animation to Fast
and your done! have fun with your brand new Android phone..
dont forget to check this thread for updates!
Ts-calib for Blackstone. Rmove extension and put it in your andboot folder.
You will also need the "lib_camera" folder in the root of your SD-Card for camera to function. This is missing in this ROM distribution, but you can find the link for it in the first post here: http://forum.xda-developers.com/showthread.php?t=883966
Is this FroyoX build of yours still based on the Huawei U8150 from Neopeek? Just wondering of curiosity.
Hello,
I just tried with the 3 different camera modules, and with and without oc.
I used calibration from this thread and also from an older install of mine.
Find attached my STARTUP.txt.
I always have the same result.
Haret Booting OK
Passing Boot animation OK
Unlock SIM card OK
Then during the setup process, after clicking on the droid, it freezes and the image stay put, I can not do anything but soft reset. It does it at different stages: Time setup, or google account setup, or location setup...
If there is a way I can give you more information about what's going on please ask.
Cheers,
ok for those who are having crashes from setup screen: THIS IS WHAT WORKED FOR ME ON MY BLACKSTONE AND MY WORK WITH OTHER DEVICES!!
OPTION (1)
1) WHEN YOU REACH SETUP SCREEN REMOVE SIM CARD ONLY.....NOT BATTERY!
2) NOW CARRY ON WITH SETUP SCREEN AND SKIP EVERYTHING IT MAY FREEZE FOR 5SEC OR SO JUST WAIT!
3) NOW YOUR AT HOME SCREEN NAVIGATE TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER!
4) NOW THAT YOU HAVE PROVIDER AND IT HAS A GREEN DOT TO THE RIGHT OF IT YOU NEED TO POWER OFF YOUR DEVICE!
5) REPLACE YOUR SIM CARD AND POWER UP IN WM AND THEN RUN HARET AND YOU SHOULD BE GOOD TO GO WITH NO FREEZING IF YOU HAVE THE 3G ICON SHOW IN YOUR STATUS BAR AT THE TOP!!
OPTION (2)
THIS REQUIRES SPEED BUT WILL WORK BUT YOU HAVE TO BE FAST YOU MAY HAVE TO REBOOT LEAST 3 TIME BECAUSE IT MAY FREEZE!
BOOT HARET WHEN YOU REACH SETUP SCREEN THIS TIME LEAVE SIM CARD IN BUT TRY TO SKIP EVERYTHING AS QUICK AS U CAN, TO GET TO HOME SCREEN, IF YOU MANAGE TO GET TO HOME SCREEN THATS THE SETUP PROCESS DONE, IF YOUR PHONE FREEZES RESTART IT AGAIN YOU SHOULD BE AT HOME SCREEN THIS TIME, YOU NEED TO GO TO (SETTINGS, WIRELESS & NETWORKS, MOBILE NETWORKS, ACCESS POINT NAME.......CHOOSE YOUR PROVIDER THEN GO BACK 1 THEN GO TO NETWORK OPERATORS AND SELECT AUTOMATICALLY IT WILL SEARCH THEN AFTER 10 SECONDS FREEZE...........REBOOT AND YOU SHOULD BE GOOD TO GO! (NOTE YOU SHOULD DO THIS QUICKLY FROM WHEN YOUR HOME SHOWS HOME SCREEN BECAUSE IT WILL FREEZE WITHIN 40 SECONDS)
i know it alot of messing around but its worth it,........if you want to try this build out because its fast fast fast!!!!!
hope it works for you all
These issues are been delt with ive been told in the nxt update............no camera working at the moment
Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Update2:
-Wifi is OK (just has to change zImage and modules)
- Market: OK (download apps included)
Update3:
- Screen orientation OK
- Talk OK
So far no freeze or sluggishness. Amazingly fast.
Everything works perfect! Even the live wallpapers are working! Thanks to the developers...
Wow! Can confirm this is a lightning fast version!
Especially WIFI I've never seen so fast on FROYO build, could not believe my eyes, much appreciated!
(note: for some reason added modules and zkernel could not get WIFI to work, tried several things, but in the end changed to latest kernel (1253) and got amazing results!)
Camera would be nice, could you also check if "sound stuttering" is fixed in next build?
(as you probably already know, VirusCrazy managed to disable battery polling during sound playback in test kernel http://forum.xda-developers.com/showthread.php?t=883966)
Final note: keymapping is still wrong for blackstone, power button can be mapped to home, with long press to latest programs, see also http://forum.xda-developers.com/showthread.php?t=936601
All in all, great start, can't wait to see next steps!
Cheers,
Robbert
Blackstone, 524MHz, FROYO X 2011.02.02
littlewhitedog said:
Thank you, that helped.
Now testing other functionalities.
I changed end button mapping to "back home" as it seems it had same mapping as power button initialiy. I also put animations and transitions to fast.
I synchronized my google account and gmail/contacts/agenda are fine.
I'll keep you up to date. But, so far, this is definitely the best versions I ever tested. It is amazingly fast!
This is awesome work!
UPDATE1:
- Wifi : not OK.
This is a shame because as I do not have data plan, it means I can not download apps from the market without wifi, and I would really like to download some apps. I would really appreciate a fix!
- Gallery: OK
- SMS receive and send: OK
- Camera: Not OK
- Music Player: Partially OK because there audio stuttering (note: is this applicable to this version: http://forum.xda-developers.com/showthread.php?t=905085&page=4)
Click to expand...
Click to collapse
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME
All thanks to tiad8 for making it possible on our blackstone!
welard said:
TRY USING THE OTHER kernel_module + ZIMAGE IN PACKAGE.........WIFI WORKS FOR ME
Click to expand...
Click to collapse
Thanks, it did the trick. I updated my first post and will keep testing!
littlewhitedog said:
Thanks, it did the trick. I updated my first post and will keep testing!
Click to expand...
Click to collapse
what about the battery ? does it stay alive for more than one day ?
tarmacmaster said:
what about the battery ? does it stay alive for more than one day ?
Click to expand...
Click to collapse
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.
littlewhitedog said:
I will keep you up to date with the result after this week end. Today is not really a typical day because I rebooted a lot, changed versions this morning.
Click to expand...
Click to collapse
ok ! I'm looking forward to see how much it can stay alive with this FROYO
well
hmmmm
froyo X always worked for my blackstone
Hi
On my blackstone
WiFi don't work
Camera don't work (i try three kernels)
Can you help me?