Related
Ok, now when I tilt the screen of my touch pro2 up, it has a slight wobble (in the direction the screen tilts, not sideways). Is it normal for a tilt screen device to have this "freeplay" from new?
Hi All
I have the same problem. My screen wobbles too. min 5-7mm "freeplay".
See my post yesterday
http://forum.xda-developers.com/showthread.php?t=524432
Just had blokey on from the company saying it was normal for the TP2. I must have had a good 4-5mm of play when it was tilted which seemed odd as my Kaiser was (and still is) totally solid with no play at tilt.
It would be really useful if people could post to say whether they have any 'freeplay' or not when tilted.
Thanks
John
yes freeplay here about 10m i would say its very loose
combat goofwing said:
yes freeplay here about 10m i would say its very loose
Click to expand...
Click to collapse
even 10mm is super loose
i think becoz it use different mechanism.
Have logged a call with HTC supprt to get the definitive answer, to wobble or not to wobble. Will update this post when I get a reply
Sent my unit back today and hope to get a replacement soon.
There was something seriously wrong with my unit.
See Pictures uploaded
http://www.noelsolutions.com/IMG_7673.JPG
http://www.noelsolutions.com/IMG_7675.JPG
tiinking of sending mine back to be replaced not only does it wobble in tilt but with the keyboard closed if i holed the phone flat of my hand and put slight pressure on the top left corner the screen slide about up just on one side is this normel so the screen can look off set
mine is loose but that is normal as you can't have the screen too rigid in tilt position. also its on hinges and that will have a part to play with the wobble. remember the screen is attached to the body by a ribbon which needs the screen to have that bit of play to take tension off the ribbon. when in tilt position look at the back of screen you will see the black ribbon. wobble the screen and you will see the kink in the ribbon when wobbling. now imagine having a really taut screen and the pressure that would be exerted on that ribbon. wobble is acceptable as it plays an important role! thats my opinion. i have a kaiser/tytn 2 and the screen is very wobbly and loose.
shingers5 said:
mine is loose but that is normal as you can't have the screen too rigid in tilt position. also its on hinges and that will have a part to play with the wobble. remember the screen is attached to the body by a ribbon which needs the screen to have that bit of play to take tension off the ribbon. when in tilt position look at the back of screen you will see the black ribbon. wobble the screen and you will see the kink in the ribbon when wobbling. now imagine having a really taut screen and the pressure that would be exerted on that ribbon. wobble is acceptable as it plays an important role! thats my opinion. i have a kaiser/tytn 2 and the screen is very wobbly and loose.
Click to expand...
Click to collapse
I second that Shingers,
My Kaiser became very loose after about one year.
The Rhodium looks to have a much more robust design though and yes there should be some amount of free play.
Time will tell how good the redisgn of the tilt mechanism is though.
Cheers,
Beasty
shingers5 said:
mine is loose but that is normal as you can't have the screen too rigid in tilt position. also its on hinges and that will have a part to play with the wobble. remember the screen is attached to the body by a ribbon which needs the screen to have that bit of play to take tension off the ribbon. when in tilt position look at the back of screen you will see the black ribbon. wobble the screen and you will see the kink in the ribbon when wobbling. now imagine having a really taut screen and the pressure that would be exerted on that ribbon. wobble is acceptable as it plays an important role! thats my opinion. i have a kaiser/tytn 2 and the screen is very wobbly and loose.
Click to expand...
Click to collapse
Yeah my partners one has same things as you mention but it does not look uneven like mine.
Here is my partners
http://www.noelsolutions.com/diamondpro2.JPG
Mine
http://www.noelsolutions.com/IMG_7678.JPG
My Hermes has the same wobble since the first time I got it. 2,5 years later, it's still working great. Don't think it's a lot to worry about. or the people who don't have the wobble, it probably will be there in time.
xxnoelziexx said:
Yeah my partners one has same things as you mention but it does not look uneven like mine.
Here is my partners
http://www.noelsolutions.com/diamondpro2.JPG
Mine
http://www.noelsolutions.com/IMG_7678.JPG
Click to expand...
Click to collapse
yeah yours defo looks like one of the hinges are loose. that needs to go back defo. might just need tightening but i'd request a replacement if i were you! good luck with that
thanks for the input guys,
John, let us know what's the official position on this. Apart from the wobble device is working fine so I decided to keep it, it's not a deal breaker for me - i operate it while flat anyway and it stays tilted when put on the desk.
The looseness is like, when you tilt it and shake back and forward slowly, it eventually goes down in 3 shakes. Using the touchscreen when tilted is impossible unless you have a finger behind it.
I don't know, all the reviews are praising the stiff tilting mechanism of TP2 and online videos show people applying a bit of pressure on the device to tilt the screen, mine is not like that, that's why I started the thread.
It did say it's the first batch here in UK on the MFDirect website, so could be an early flawed version.
Will do, still waiting to hear. Just think its a bit disapointing if this is a part of the design as (and I really don't want to take anything away from the brilliance of everything else about the phone & how much people, including me seem to love it) it makes it feel, well cheap.....which as you say was the opposite of the reviews the phone has got from everywhere else.
Maybe mine was a lot looser than others have experienced? maybe I'm just a fussy ba***rd, don't know?
MPD won't replace it as they say it is normal, I'm waiting for it to come back then I'll send another email with a couple of snaps/video to HTC to get the definitive view. Will keep you up to date.
And waht about this,it was a little hard for me to explain it corrctly,so i'v take a picture
is it normale ?
http://img38.imageshack.us/img38/4057/tp2a.jpg
yes i think it is. Its the part that slide's out and also can be tilted. That means that it isn't attached to the bottom of the device and i guess that is wat causes the problem. I also have that problem a bit.
When i slide the device out and NOT tilt it it looks perfectly straight, but when i tilt the screen it wobble's a bit but i guess thats normal to..
same problem ..... same wobble .... still i love it
Thanks guys so i will love more my tp2
The definitive view part 1
Hi all
HTC have replied to my first query. Posted below. Basically there should be no looseness/wobble. I'll speak to them and MPDirect and see what happens next.
'Thank you so much for contacting HTC Technical Support Team.
Regarding your request, kindly note that the symptom you stated (the screen when tilted was loose on its hinges and wobbled back and forth by a few milimetres ) is not a normal symptom. the Screen should be firmly in place.
For further assistance please don't hesitate to contact us on our hotline < 0845 890 0079 > or visit our website at www.htc.com .
Respects & Regards,
HTC Technical Support Team.
Even if the TP2 is very nice, I got mine last week that stupid camerahole bothers me and the TP1 was the same.
So I taped that hole (look at the picture)
Or does someone else got a better solution for it?
P.S:
I can still take nice pictures
x3dfx said:
Even if the TP2 is very nice, I got mine last week that stupid camerahole bothers me and the TP1 was the same.
So I taped that hole (look at the picture)
Or does someone else got a better solution for it?
P.S:
I can still take nice pictures
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showpost.php?p=4009075&postcount=38
x3dfx said:
Even if the TP2 is very nice, I got mine last week that stupid camerahole bothers me and the TP1 was the same.
So I taped that hole (look at the picture)
Or does someone else got a better solution for it?
P.S:
I can still take nice pictures
Click to expand...
Click to collapse
Especially recommended the production for romantic, blurry pictures.
sancho1234 said:
Especially recommended the production for romantic, blurry pictures.
Click to expand...
Click to collapse
Not really, it's not THAT blurry ^^
To be honest, I don't give a thing about the camera that doesn't even has a flash
@gcheok
What's the point with the screen protector
I don't want dust in the back of the phone.
Agreed. Having a protector in the lens is only useful if you're planning on jabbing sharp objects through the hole in the back cover.
A much more effective solution is to cover the hole itself, thus preventing the back of the phone from filling up with dust.
Seems like a bit of a weird thing to do on HTCs part, though I can understand it. On my TyTN2 I actually took the back cover off to take photos as the "lens cover" was so obliterated and caked with dust.
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
shadehh said:
I read about screem gap but i was unsure what exactly was meant. I just took a closer look and found out that there is a tiny gap between my screen and phone on top in which dirt fills in and it pisses me off. I havent dropped my screen once and if i push the top left part of my phone i can hear a sort of "click".does that make my phone faulty? Im really annoyed vy the dirt that fills in... Apart from rhat phone has no problems.
Click to expand...
Click to collapse
send it back. that is what i am doing. left hand side of the phone between the screen and the plastic you can see dust getting inside there to. plus if you press the left hand side tad hard you can hear it creaking as well. i called HTC to see if they could replace it for me straight away without sending it for repairs..waiting for an outcome tomorrow...if they say no i will just send it for repairs and hope they find the problem and either fix it or replace it then...i know it will drag for a week but at least that way you know one way or the other it will get fixed...
i was going to say if it does not bug you then leave it..but you sound just like me that even though the phone works fine it will bug you cause you know it is there
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
shadehh said:
should i go to my provider or directly cpntact htc? And just to understand it better. Gaps are not supposed to be there, am i right?
Click to expand...
Click to collapse
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Living in austria, where to check for such a repair center?
forumhookersdotcom said:
Dont replace it as you have no other problems. Go to HTC repair center and just fix it. If you replace there may be a chance of getting more faultier one.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
have to agree with that as well. but at the same time new batch of phones get send out so you never know. just go to HTC site and do a locator for your country my friend
shadehh said:
Living in austria, where to check for such a repair center?
Click to expand...
Click to collapse
Have a look at this . May be useful
http://www.htc-floorsystems.com/en/HTCGlobal/HTCOffices/HTCGermany/Contacts.aspx
Sent from my HTC One X using Tapatalk 2
Thank you all and especially goku80 for fast replies. Gotta love xda community
shadehh said:
Thank you all and especially goku80 for fast replies. Gotta love xda community
Click to expand...
Click to collapse
no problem my friend. i feel your pain and know what you are going through. i will keep you updated with my one and what happens..keep me updated with yours as well
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
oh really..seriously i wonder if you had a gap how would you feel about your perfect phone? everyone to their opinion. i can live with it no problem..but the fact knowing that it is there will bug the **** out of me hence why i am going through what i am right now
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Eddzz!! said:
I had a creaky SGS for 2 years. I still have it now and it works and looks as good as it did on day one.
Click to expand...
Click to collapse
well i will see what they say tomorrow..if they replace it for me all is good..but if they do not and want to fix it ehh i kinda have to think twice being without my phone for a week
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
htcmodteam said:
Ive heard that the one x was made in 2 different countrys taiwan and china... china being the worst built ones buttt I must have a really faulty dhd. I've had it for 10 months now and my screen moves, doesn't fit right on the phone as there should be a lip round it but isn't my speaker isn't straight so is sloping. Looks like the cnc machine hasn't cut it right. Power button is really recessed too far in..... I think a little sqweek is nothing to really worry about if the screen falls out then ya I'd send it back.
Sent from my Desire HD using XDA
Click to expand...
Click to collapse
well that is what worries me about the whole damn thing..if it gets to hot to soon and in two months down the line the screen actually does fall out
TBH ive just checked mine and it does have a slight gap with lint building up already (bare in mind ive had this phone 2 days) Also have the yellow blotch on the screen AND a dead pixel. This is by far the best phone ive ever owned...But my word these little niggles are grating on my moobs! Ive never had to send a phone off to a repair centre before but im not really willing to put up with the problems the phone has (however ridiculously small they seem to some ) You expect some software issues in an early batch, but dead pixels, discoloured screens, gaps occuring out of nowhere between the screen, its a bit much really! Im gunna have to get it sent off soon i think, gutted!
how do you clean the dust build up?
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Use a screwdriver.
P.S. http://forum.xda-developers.com/showthread.php?p=27066789
abuds87 said:
how do you clean the dust build up?
Click to expand...
Click to collapse
Vacuum cleaner with a soft piece of cloth on the vacuum tube to avoid scratches.
Just another option
To the OP: May I ask what serial your phone has?
Cheers.
Eddzz!! said:
It amazes me some of the reasons people will find to return an otherwise perfect handset. Considering the amount of serious problems floating about this phone, I don't think a creak or 1mm gap between the bezel and screen constitutes a return. Get over it and enjoy the phone.
Click to expand...
Click to collapse
Do you even realize how big 1mm is?!!!! Get a ruler and see please....
I doubt even a blind person could enjoy a phone with a gap big as that. You would not just see this, but also feel.
I have a gap that's about 0,1-2 mm big (measuring with paper, which is about that in average I think 0,1 till 0,3 I think but also not sure) and its around the whole screen on both sides of the ring.
Ugh...1mm...
But seriously guys, how big are the gaps it makes you return it?
I mean should I return it with 0,1 mm ? (maybe less) seen a bigger gap on SGS 2.
Has anyone else noticed the infamous purple noise problem on their Verizon Ones in low light? There's a giant thread about it here in the international variant's section. It gets especially bad when you take a picture in total darkness or cover the lens entirely. If your phone has one of the defective sensors, the whole screen will turn bright purple.
Also curious to see if there's a certain batch of camera sensors behind this. If you have this problem, could you browse to /sys/android_camera/sensor and post the text inside? Mine says "st vd6869(1.0) cinesensor 2013-05-03".
Before anyone suggests that this is a software problem, there are a quite a few units that don't exhibit this issue and show perfectly black images in the dark, so I'm more inclined to believe this is a hardware defect.
wireroid said:
Has anyone else noticed the infamous purple noise problem on their Verizon Ones in low light? There's a giant thread about it here in the international variant's section. It gets especially bad when you take a picture in total darkness or cover the lens entirely. If your phone has one of the defective sensors, the whole screen will turn bright purple.
Also curious to see if there's a defective batch of camera sensors behind this. If you have this problem, could you browse to /sys/android_camera/sensor and post the text inside? Mine says "st vd6869(1.0) cinesensor 2013-05-03".
Before anyone suggests that this is a software problem, there are a quite a few units that don't exhibit this issue and show perfectly black images in the dark, so I'm more inclined to believe this is a hardware defect.
Click to expand...
Click to collapse
I have the same problem. I am determining if I should bother replacing it. I have to decide by tomorrow. I am currently unlocked and don't know if it bothers me enough to lose that right now.
std vd6869(1.0) cinesensor 2013-04-25
Frankie1588 said:
I have the same problem. I am determining if I should bother replacing it. I have to decide by tomorrow. I am currently unlocked and don't know if it bothers me enough to lose that right now.
std vd6869(1.0) cinesensor 2013-04-25
Click to expand...
Click to collapse
Wow, that sucks.
I'm considering the same thing, though I'm not facing such an issue. I want to know if this camera problem is widespread to see if it's worth exchanging; it would be awful to go through the whole exchange process and wind up with the exact same problem on the replacement. And it would especially suck to lose your bootloader unlock for nothing...
wireroid said:
Wow, that sucks.
I'm considering the same thing, though I'm not facing such an issue. I want to know if this camera problem is widespread to see if it's worth exchanging; it would be awful to go through the whole exchange process and wind up with the exact same problem on the replacement. And it would especially suck to lose your bootloader unlock for nothing...
Click to expand...
Click to collapse
My dad also has the HTC One from Verizon (got it a week later). His camera exhibited no such issues. I am going to try messing with his again tomorrow.
Its definitely a widespread issue though as you can see on that XDA post. I've also been following that since I got the phone. There is someone who thinks it might be a software issue and can be fixed by flashing libs. He is working on it.
http://forum.xda-developers.com/showthread.php?p=45158495
I am just afraid of returning it and getting another headache such as dead pixel(s), chassis gaps/scratches, or anything else like that. I am trying to determine if I could live with it. I don't take many low light shots, but it will suck when I do.
When did you get your phone? It sucks that I have to decide by tomorrow!
EDIT: My camera pretty much does the same thing as shown in this pic (For others who may not be aware what we are talking about)
http://forum.xda-developers.com/showpost.php?p=45298491&postcount=966
I got the phone about a week after release. Not sure that means much though, they seem to be randomly using old leftover parts to build the phones (according to the serial number, mine was built in July).
Can you post a picture of the purple stuff? I've seen other threads on this - in one case it did look like classic low-light issues that plagued certain Dincs, but another guy's pictures seriously did not look like digital noise to me - looked like an oily smear, maybe a manufacturing defect.
st vd6869(1.0) cinesensor 2013-06-20
Mine doesn't have the issue and it was purchased in the release day.
I had this same problem. I went in to verizon and showed the guy and we went through 3 replacements before he swore it was a software issue. Then I showed him that covering up the camera lens on their display model showed a plain black screen, while the replacements were showing that purple/pink tint. Here's an album with a couple of pictures of what it looks like.
https://www.dropbox.com/sh/m93o47ugxapos4v/hB6YN6kw-n/HTC One
My camera does the same.
I took it to the VZW store today but didn't have my ID nor did I bring the box with me.
Planning on going back tomorrow.
They told me they'd replace the phone for me so we'll see what the new one does.
Will report back!
BTW, nice car Frankie1588 if that's yours
Mazda RX-8?
For reference - here's a pair of low light shots, one with night mode on and one without. Definitely worth replacing because this phone sees better in the dark than I do, and that's pretty cool - this scene is nowhere near as bright as the pictures make it look, and night mode gets rid of speckling artifacts entirely.
So just going into the Verizon store, you guys were successful in getting replacements? How hard was it to sell that the phone had an issue?
guess I'll test the camera as soon as fedex drops off the phone tomorrow. I'll just call if its bad and make them overnight me a new one.
so if you take a shot in low light without the flash on, and it comes out fine, your camera is ok?
sorry just trying to see if mine if effed.
I help the lens cover and got purple, but when i shot in dark (under my bed) with and without flash, they came out normal?
dunemessiah said:
So just going into the Verizon store, you guys were successful in getting replacements? How hard was it to sell that the phone had an issue?
Click to expand...
Click to collapse
I just went into the store today and they took my word for it when I described the problem.
Said they have been having a lot of people come in for the same reason.
Since I used another line's upgrade they said I couldn't swap out in the store.
But because of the device still being under warranty, they're shipping me a new one
And I just have to ship my current one back. I seriously hope this new one doesn't have
the same problem.
dunemessiah said:
So just going into the Verizon store, you guys were successful in getting replacements? How hard was it to sell that the phone had an issue?
Click to expand...
Click to collapse
nrfitchett4 said:
guess I'll test the camera as soon as fedex drops off the phone tomorrow. I'll just call if its bad and make them overnight me a new one.
Click to expand...
Click to collapse
andybones said:
so if you take a shot in low light without the flash on, and it comes out fine, your camera is ok?
sorry just trying to see if mine if effed.
I help the lens cover and got purple, but when i shot in dark (under my bed) with and without flash, they came out normal?
Click to expand...
Click to collapse
PizzaSauce said:
I just went into the store today and they took my word for it when I described the problem.
Said they have been having a lot of people come in for the same reason.
Since I used another line's upgrade they said I couldn't swap out in the store.
But because of the device still being under warranty, they're shipping me a new one
And I just have to ship my current one back. I seriously hope this new one doesn't have
the same problem.
Click to expand...
Click to collapse
I got mine with the Edge program (don't judge me), and they were very easy to deal with in store. I just told them that it's an awesome phone, and the camera wasn't working. I showed them that it wasn't working by just covering the lens with my wallet. It showed that pink/purple tint on the screen. We went through three phones before we found one that didn't have that when covering the lens. I would definitely take yours back because the lens, when not taking in any light, should be completely black.
murderdock said:
I got mine with the Edge program (don't judge me), and they were very easy to deal with in store. I just told them that it's an awesome phone, and the camera wasn't working. I showed them that it wasn't working by just covering the lens with my wallet. It showed that pink/purple tint on the screen. We went through three phones before we found one that didn't have that when covering the lens. I would definitely take yours back because the lens, when not taking in any light, should be completely black.
Click to expand...
Click to collapse
I got mine via edge to, 5 months after getting the note 2 on my upgrade. I'll either pay it off or trade it in at half paid off.
I think some of y'all might be mistaken on the camera.
You need to take a picture in pitch black room, not just cover the camera with your finger. Mine was able to draw light in through my finger, but when I went into the bathroom with the lights off, I got a solid black picture.
Just like a flashlight shines red through your finger, so to some extent can natural light.
nrfitchett4 said:
I got mine via edge to, 5 months after getting the note 2 on my upgrade. I'll either pay it off or trade it in at half paid off.
I think some of y'all might be mistaken on the camera.
You need to take a picture in pitch black room, not just cover the camera with your finger. Mine was able to draw light in through my finger, but when I went into the bathroom with the lights off, I got a solid black picture.
Just like a flashlight shines red through your finger, so to some extent can natural light.
Click to expand...
Click to collapse
I completely agree about not covering it with your finger, light still gets in. You can definitely find an object to cover up the lens, though. The display model at the Verizon store was black when covered with my wallet, but my phone was showing that tint when covered.
nrfitchett4 said:
I got mine via edge to, 5 months after getting the note 2 on my upgrade. I'll either pay it off or trade it in at half paid off.
I think some of y'all might be mistaken on the camera.
You need to take a picture in pitch black room, not just cover the camera with your finger. Mine was able to draw light in through my finger, but when I went into the bathroom with the lights off, I got a solid black picture.
Just like a flashlight shines red through your finger, so to some extent can natural light.
Click to expand...
Click to collapse
I've tried taking pictures at night. It turns into the same purple mess that you see when you cover the lens completely.
murderdock said:
I completely agree about not covering it with your finger, light still gets in. You can definitely find an object to cover up the lens, though. The display model at the Verizon store was black when covered with my wallet, but my phone was showing that tint when covered.
Click to expand...
Click to collapse
wireroid said:
I've tried taking pictures at night. It turns into the same purple mess that you see when you cover the lens completely.
Click to expand...
Click to collapse
then I would definitely get a replacement. Mine was solid black. Also don't have any gaps along the top, or scrapes, imperfections that I can find.
Only thing I noticed was the white band at the top was not quite flush. Have to really look to notice. I'm considering myself lucky.
nrfitchett4 said:
then I would definitely get a replacement. Mine was solid black. Also don't have any gaps along the top, or scrapes, imperfections that I can find.
Only thing I noticed was the white band at the top was not quite flush. Have to really look to notice. I'm considering myself lucky.
Click to expand...
Click to collapse
yea I got lucky as well with the build quality.
I am hoping the same with camera.
I just tested in pitch black.
taking pictures with out the flash on obviously left me with a black picture.
with flash everything was great.
am I do now believe my camera is ok?
or did I test wrong?
thank you in advance.
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Nope.
Gasaraki- said:
Nope.
Click to expand...
Click to collapse
This ^
ArticFox918 said:
This ^
Click to expand...
Click to collapse
This x2.
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Mine creaks a little in the bottom right corner. Everything else is fine. I think it's the plastic back giving a bit. I had this on the Nexus 10 as well.
Creaking is for Hollween not for my Tablet!
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, When I held the tablet with my left hand to touch the screen with my right it creaked like a rock band with bad music! Geeish.....the silver chrome or whatever the material is wasn't tight and it just bend. I returned it right away. I really didn't want to return it. However, I paid full price and not second hand money so I expect the performance to be right, that means no noise. When listening to music or watching a movie it seems as if someone was moving around and that can be pretty annoying. I tried holding it different ways with no change. So back it went. Let Samsung sell. This I know imagine you trying to sell it to the next person, what do you think they might say and how much will the value go down?
Doc
yanni_puffin said:
I got my note 4 days ago. At first everything was ok, but yesterday I noticed my device is terribly creaking. Almost every time I touch the back it sounds like the plastic would break a little bit (Although I don't think it would actually break).
Do you have the same issues? Or should I sent it back and get a new one, since it's really annoying me...?
Thank you )
Click to expand...
Click to collapse
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
kashbg said:
Yes, As soon as I opened the package, I noticed the bottom right hand corner was creaking an popping. It is not like I was looking for it. That made me investigate if the rest of the trim was doing the same. If you put your mind into into it, you can get some creaking from other ends of the trim but nothing like the bottom right hand corner. Every time I pick it up, it is annoying me so much that I feel I should take it back. I am not sure the guys at PCWorld would accept this as a reason for full money back or replacement claim. I do like the tablet, but do not want a noisy plastic in my hands.
Is this enough of a reason to ask for a replacement?
Click to expand...
Click to collapse
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Geordie Affy said:
Sadly I dont think it is (pure guess so dont take my word for it) BUT I can 100% say that your Tablet will have a little bit of lightbleed along the bottom and sides....this alone is a good enough reason for them to accept and exchange - Good luck.
Click to expand...
Click to collapse
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
kashbg said:
Hi,
Could you please elaborate on the light bleed issue. How do you determine if you have a light bleed and what is the significance of it.
Regards,
Click to expand...
Click to collapse
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Geordie Affy said:
Put screen britghness to 100% and open this http://www.net-tracker.net/android/wp-content/uploads/2011/05/black_bg_1024x768.png, make sure it covers the entire screen inc notifications part and then switch off your lights in your room and you will then see light bleed, Its nothing major and common on LCD'S but it is a valid reason for a return/exchange.
I had lightbleeding on my first note but I found it to be acceptable however on my 2nd tablet I found the bleeding to be excessive and off putting so I got a refund from John Lewis,
Anyways this thread should give you an idea too - best of luck :good: http://forum.xda-developers.com/showthread.php?t=2554094
Click to expand...
Click to collapse
Thanks,
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
mine creaking along left side
funfun99999 said:
mine creaking along left side
Click to expand...
Click to collapse
same here
Got mine 2 weeks ago, and it sounds like a bowl of snap, crackel, and pop, sitting on bubble wrap.
If i look at it wrong, it makes noises. I might take it back and have them look at it... see if that warrants an exchange.
Sent from my freekin huge Note 10.1 ?
Eric214 said:
Nope, no creaking and barely any noticeable light bleed (Just 2 spots on the bottom i have to tilt to see)
Click to expand...
Click to collapse
If your one is not creaking then this definitely should be a rightful exchange claim for all those unfortunate to pick up badly put together tablets.
I am even considering getting my money back and going the Apple way. Excellent build quality, and I know that because I got some for the kids.
yeah maybe idk. Sammy is also known for build issues lately so you have to really inspect before you take home. The Note 3 home button is all wonky and wobbly on a lot of units.
Eric214 said:
yeah maybe idk.
Click to expand...
Click to collapse
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
kashbg said:
Sorry for the question, but what is "idk" in your post?
Having a creaking case, would that get worse in terms of speading all around the tablet's trim?
Any experiences but no guesses please!
Click to expand...
Click to collapse
"IDK" means "I Dont Know".
I guess if the creaking was coming from say a loose glass to the digitizer i think it could be something that spreads. Since if the glass isn't glued down well enough i could see slight dust getting in there and causing more separation over time. I doubt this is the case as you'd see bubbling at the edges if that was happening.