Develop Bugs

Greeting oh clever ones | mun's Rom question

Hi People
First off, want to say hi, really looks like a nice community here, and hoping to be a human sponge and soak up all I can from you
Hopefully be able to contribute at some point in time.
I got a SPV m700 (Trinity) from Orange, and using my T-mobile sim card in it, after installing mun's ROM update.
Just wanted to know - does the INTERNAL gps still work, as I can only see the external GPS setting.
Will be loadin up TomTom as soon as I get a memory card.
Any other suggestions from you guys - that has experience with t-mobile settings for this phone?
cheers!!

You'll be fine.
Don't mess with any of the GPS settings, and when you install TomTom set it up as follows:
Other NMEA receiver
Com 9 Baud 115200

Cheers buddy.
I went thought the massive thread (tried to anyways) and could get a straight answer if it's still enabled or not.
Thanks

With tomtom, just use the Built in GPS setting.

soopahfly said:
With tomtom, just use the Built in GPS setting.
Click to expand...
Click to collapse
Sweet - like these kind of answers
"JUST leave it alone"

Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me

sup3rc0w said:
Can anyone tell me how to make mine look like this
http://www.4winmobile.com/forums/tr...9836-some-trinity-mun-rus-te-screenshots.html
Is that just the Homeplug?
If so, where can i download it from --> google is failing me
Click to expand...
Click to collapse
It' in NeilM's third post (look for 'try this')!

Jazza said:
It' in NeilM's third post (look for 'try this')!
Click to expand...
Click to collapse
GAH - I'm going blind!
Thank mate - can't believe I missed that

Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?

i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.

pinkllama said:
i've also got a t-mobile sim in my m700. if you are in the u.k run the attached program from your phone to get all the necessary t-mobile settings.
Click to expand...
Click to collapse
You're the man.
I knew p[osting here will be a good idea

sup3rc0w said:
Sorry to be a pain - but how do i install that - do I need to edit the XML files, or anything to that effect?
Click to expand...
Click to collapse
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.

Windoze9t8 said:
No, just install and enjoy. you can copy the .CAB file to your Device and install from there. There only screen you will not get is the COMM Manager.
Click to expand...
Click to collapse
There is no cab file, only a setup.xml

sup3rc0w said:
There is no cab file, only a setup.xml
Click to expand...
Click to collapse
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works

Windoze9t8 said:
Forgive for saying that you must be doing somthing wrong then or using a PDA to access the site. What happens when you click the link in the 5th (#5) post.
seleting "Try This" should bring up a save dialog box. I used the link the otherday and did again just know to test the link still worked.
edit:
Click this link instead HTC_Home_Plug_Today
Hope this works
Click to expand...
Click to collapse
Cheers dude - second link works just fine, first one is just a bunch of XML files for some reason
Might have something to do about work blokcing it - but I doubt it.

Just caught up on this thread- sorry!
Glad you now have the HTC HomePlug- I've just tried the download from our site, and it worked fine, so maybe a config problem on the PC you were using?
If you haven't already, just copy the cab file to the PPC, then locate it with Pocket File Explorer, and tap it to install.
Now go to Settings/Today/Items and put a checkmark against it, and uncheck other plugins you don't need, and voila !

Tilt 2, can I get Manila 2.5?

Hay guys, let me just say im complete newb at all this phone stuff unforchunalty. I dont know anything about this stuff so im asking for your help please. Ok, i want to get the upgraded HTC tf3d on my AT&T titl 2. I'm sick of the blue AT&T blue. Is it possible to get Max Manila 2.5, (I think that whats it called) for my phone? I dont know how to dl it onto my phone, or aanything. So please if any of you guys can help id be very thankful. Note, I dont know how to unlock or flash my rom, I dont even know what that mean but i see them alot. Thank guys.

Welcome to forums
yes you can have Manila 2.5
Have a deep read here to learn how to flash:
http://forum.xda-developers.com/showthread.php?t=550540
Then select the ROM of your preference on the Rhodium section
Read, Search, Respect and Emjoy!
Good luck,
And don't forget to vote for Rhodium!!

Hay thx orb3000!

Since you are newbi I recommend the Energy
To have most of the work done for you check out:
http://forum.xda-developers.com/showthread.php?t=562773
I am running NRGz 21855 Dec 31st Standard build and it is pretty sweet. A few bugs but it is still nice. NRG also puts out another TP2 ROM which is less than bleeding edge but more stable codenamed Pheonix. Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!

Omg kroniced thank you to for repling, Im having a hard time with this, there is a good chance im going to be asking for help. Thanks alot for the link man, I really mean it.

kroniced said:
Also sense 2.8 (used to be called Manila) has recently been released for the Leo so we will see it baked into Roms including the above listed one very soon!
Click to expand...
Click to collapse
Wait, what?
As in, Touch Flo 3D 2.8? As in a new version over Sense UI 2.5, already found on Leo & custom roms for other devices?

Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!

theherofromdoom said:
Progress report lol, Ok ladys and gents here is where im at. Well sadly i dont get alot of time to work on this, only weekends mostly because of work and what not. kroniced send me this perfect really cool ROM on the link of this page, its just like Max Manila 2.5/2.8, its really cool. So im looking around to the pages on how to get it and im stuck at step one. For some reason it keeps giving me a fatal error when i try to back up my phone with Rhodium-HardSPL_V2_00R3. I read from the forums you need to back up before changing ROM's. I dident know that I thought it would be like changing the wall paper or theme of the phone. Sorry really noob at this. I need like a dumbies video of how to do this or some really easy way to understand how to do this please i beg you all lol. Sorry guys this is just giving me a hard time, im gonna try and do it by tonite. please all your feed back is very helpful to me and I thank you all for it, remeber I have the tilt 2. Thank you all, wish me luck! All help is appreshated very much!
Click to expand...
Click to collapse
So what exactly happens when you run Rhodium-HardSPL_V2_00R3.EXE? Is it a connection error, a program error, a device error? If you have a Tilt2, you probably need to install this to your device before you run the executable. BTW, you're not backing up your device with HardSPL, you're replacing the stock, HTC bootloader with a patched bootloader, a process which you only need to do once. It's also not necessary to back up your device before flashing a new ROM, it's just recommended if you have important stuff saved to main memory, since you lose all the data on your device each time you flash. You will not lose data when installing HardSPL with this executable.

Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.

theherofromdoom said:
Hay thanks for reasponeding DaveTheTytnIIGuy, here is what the error seys, "ERROR
[246] Device not reasponding" -"The update utillity cannot get respones from your PDA phone. Please check that your USB cradle/cable is connected properly between the pc and your PDA phone. And also check your PDA phone."
Now my phone is connected, im possitive it synced as well. I dont know why is seys that. As far as anything I have on my phone just all my numbers, the rest are things like music witch i can put back on, but thats on my 8 gig memory card.
I down loaded the link named "this" to my comp. How do I get them on my phone, extraced them to my phone?? Not really sure how or what to do.
Click to expand...
Click to collapse
A .cab is an installer, just like an EXE or MSI on a desktop computer. Don't uncompress it, just put the .cab file as is onto your device, disconnect your device from the computer, browse to wherever you put it with File Explorer Mobile, and open it. Install it to internal memory and you're done. Also, try disabling your Antivirus/Firewall and ensure you have Windows Mobile Device Center (Vista/7) or ActiveSync (XP and lower). And no offence, but you might want to hold off on flashing for a little while, at least until you get a bit more acquainted with Windows Mobile. I recommend that everyone who flashes their device at least understand the technical aspects, since that highly reduces chances of bricking as an end result.

DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?

Get accustomed to you phone by doing the minor cabs and tweaks found here:
http://forum.xda-developers.com/showthread.php?t=524655
Most of this stuff is harmless and will get you use to using cabs and changing things on your phone.

theherofromdoom said:
DaveTheTyntIIGuy thank so much I did what u sed and i instolled it with no problems to my phone. You just helped me in a big way. Now I know how to download programes to my phone. So I think I have an idea how to do what i first came here to do. But your are rite 100%, I gotta get a understanding of this before I do anything so I dont screw up my phone. Thank you alot. So now that I downloaded the enablerapinew my phone is ready for when I decide to get a new interface on the phone like the Manila 2.5 / 2.8 / ext. ?
Click to expand...
Click to collapse
No, that .cab enables RAPI (Remote API) on the Tilt2, which allows programs like the HardSPL unlocker, on the PC, to control the device to an extent, which it needs to do in order to flash HardSPL.

Hi, How can I get the actual version of manila running on my Tilt 2
Thanks

It's listed in this key in your registry:
Its HKLM\Software\Manila\Version

sirphunkee said:
It's listed in this key in your registry:
Its HKLM\Software\Manila\Version
Click to expand...
Click to collapse
minor correction: HKLM\Software\HTC\Manila\Version
On the stock Tilt2, the version is 2.1.19183217.0
Note that this can also be seen by looking at the About section of the Settings tab in TF3D.

This is awsome DaveTheTytnIIGuy, the programe you sent me worked. I was suscussfully able to flash my HardSPL, with Rhodium-HardSPL_V2_00R3. Thank you. So now I'm up to the next step witch is finding a ROM.

Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?

raveztaylor said:
Is it possible to get Manila without flashing a cooked rom or is manila a cooked rom? I guess what I am asking is Can you get Manila as a CAB file or do you have to flash it as a ROM?
Click to expand...
Click to collapse
The only way to get a different version of Manila is to change ROMs. If you're using the stock ROM, you'll need to switch to a cooked ROM to get one of the newer versions of Manila.

Help! How to install Android on my Touch Pro 2?

== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami

http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.

where do u dl haret.its mentioned but theres no dl link

cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.

Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that

i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...

how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami

Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.

Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........

Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?

Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...

Oké i'm sorry... Hope it will be availible soon.

Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.

I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.

lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?

delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.

Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.

gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?

dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.

I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?

[ROM][Android] Myn's Warm Donut ported to Diamond!

First of all, it was very easy to get it working on Diamond. It is the fastest Android ever working on my Diamond. It version 1.6 ! But I think it's better because it is faster.
Still not working:
Camera
GPS ?
For a better Homescreen download PandaHome. With that tool you can download themes for Android and you can change the Lockscreen.
Also you can download OpenHome Lite, which runs much faster I experienced !
I think the battery is still a problem, because after a few ours it is empty if you are working much on your phone. Also Android says very early that your battery is empty.
The whole Android market should work!
If sound doesn't work on first boot, reboot! Then it should work.
1. Step:
Download Myn's Warm Donut for Vogue from here (The SQSH package)
forum.xda-developers.com/showthread.php?t=619980
Direct Download Link:
http://www.mediafire.com/?oitjoljxquj
Download the latest Zimage Kernel from here :
Without debugging (faster):
balsat.hopto.org/
Alternative, with debugging:
glemsom.anapnea.net/android/htc-msm-android
Download the latest RootFS from here:
http://xdandroid.southcape.org/rootfs/
Download the latest Innitrd from here:
xdandroid.southcape.org/initramfs/
Download the Startup.txt from the Attachment!!!!
The "Startup battery fake.txt" disables the 15% battery message, because the phone now only shows "battery is loading"!
Install it like the normal startup.txt and rename it as "Startup.txt"!!
2. Step
Extract all packages!
3.Step
Open the Folder of Myn's Diamond Rom and delete the following things:
INITRD.GZ
Rootfs.image
zImage
DEFAULT.txt
DEFAULT 240x320.txt
4.Step
- Copy the file from the latest INITRD to Myn's Rom folder. Rename it to INITRD.GZ.
- Open the LatestLinux folder, your zImage Kernel, and extract the .tar file. Then copy both extracted files to the Rom folder
- Now copy the file from the rootfs folder to the rom and rename it as rootfs.img
- Now copy the Startup.txt from the attachment the Rom Folder
5.Step
Copy all files of the Rom folder to the fresh formated ! storage of your Diamond.
6.Step
Start Haret.exe on your Diamond
Then Android will boot!

is this booted via haret??
and didnt we get alreayd donut 1.6??

yes it is booted via Haret.
There are some 1.6, but not as stable and fast as this one.

mediafire link for sqsh is not working!

Thank you sooo much for this build...for putting it together!!
Any idea if we can use those awesome themes on that page?? n is the resolution 640x480??

I dont know why media fire doesn't work. Now the link is correct, maybe it is working tomorrow again..I'll see.
Today Screen:
I don't know how, but i am working on it. Installation with NoMoRootfs is not working for me, maybe someone can try it?
There you have to copy the theme "androidupdate.tar" into a folder name andboot, then start android while you put down the volume up button, maybe for Diamond the button is another one? I don't know.
Theres someting called "MetaMorph" which manages themes, but it was also not working for me.
The only way i know to change the themes is to use "PandaHome"

testing
im gonna test it now and report.
PS: you can use openhome too. its a really cool program for themes.

oke i tested it:
The build is superfast i must admit.
but u seriously must fix the battery problem.. is that so hard??
i was just on the browser for 15 minutes and from 92% it went to 69%.
if you can fix that problem i will be soooo happy and the android will be completed for me...

WELDONE!
Thank you.
it is not perfect but worse to try.
WELDONE my friend WELDONE!

yepp, the fastest android on our diamonds, with it's already well knows problems: no camera and gps. By the way: how do u set the operator (3g, edge) internet options? Caz i have internet in windows mobile, which is not the case when i boot into the android via haret. In the options i didn't find anything useful to set it. Anyone?

THX man this IS the most fast rom available and i like it... but when i try to sync my google account with WIFI (WPA or no security) it fails.... it says something about not a good connection or sim data..... i CAN go to browser and browse the web though ?!

I had the same problem . Try a restart of you WiFi . For me that was the solution.

Wow thats really nice...
Had anyone tried to use one of the newer Kernels from the glemson autobuild page here:
glemsom.anapnea.net/android/htc-msm-android
Don't really know whats the differences between the kernel site in the first post and this one except that there are newer ones!?
So i think this version is a good candidate to run as a normal OS on my Diamond.
Greetz

restart of the wifi, like turning it off and on again... that didnt work.
Still got the same error.... can't get an reliable connection... bla bla... someone...
Wifi is the only way for me to sync and i really like the build so far

hm. that sounds strange. For me sync worked after it. I think restarts etc..maybe work?
Kernel
The link you wrote is also right, but the kernel i linked to is without debugging and because of that it is said to be faster.
Maybe the kernel with debugging solves some problems? Maybe the sync problem? Anyone can try it?

hermanherz said:
hm. that sounds strange. For me sync worked after it. I think restarts etc..maybe work?
Kernel
The link you wrote is also right, but the kernel i linked to is without debugging and because of that it is said to be faster.
Maybe the kernel with debugging solves some problems? Maybe the sync problem? Anyone can try it?
Click to expand...
Click to collapse
Had also no syncing probs...
Im trying the other Kernel right now...
Do you use Android for usual Day-Work? How long is your battery-life with normal use?
Anyone knows if theres a way to disable the annoying Battery Message with 15%? I think the indicator is not right and the bat can hold on longer...
Greetz

Okay tried it with the new Kernel. And your right. The one you mentioned in your first post is definitly faster and offers also less problems...
So my Android is running nice. Some minor improvements in Speed, the GPS-Module and more Battery life and i can wait another half year before buy a HTC Desire ;-)
How are the chances that GPS will work in next Kernel-Releases?
Ade

It's a nice built,and fast,but wi-fi doesn't work,and no home fullscreen,i will apreciate a little help from you,thanks!!!

liviu_007 said:
It's a nice built,and fast,but wi-fi doesn't work,and no home fullscreen,i will apreciate a little help from you,thanks!!!
Click to expand...
Click to collapse
So whats your Diamond Type? Diam100, Diam300, Diam500
There are slightly differences in these types. Mine is a Diam300 and everything is working fine...
You can check this by pressing the Vol down - Button during boot, i think... (Not sure)
And also please explain your prob a little more. So what happens if you wanna activate your WLAN in the Settings?
Greetz

The battery problem of 15 % is solved with the new startup.txt i uploaded .
GPS:
I really dont know.

Gruessle -> Kaiser Froyo Rom

06/16/2011
The screenshots are not important. This is not a theme!
You can install a theme from here, for example if you like.
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com
This is the actual Android Froyo operating system for the HTC Kaiser
So, stop asking me for screenshots and software installed, it's not relevant.
And the how to install guide is been posted here
Bug reports are welcome, other then that, I don't wont to hear from you.
Don't post a thank you either, there is a bottom for that, and you can also vote on the poll up there, but install and test it first!
Again Bug reports only, please!​
I been working on this for 3 days straight, and figure I'll share what I got.
Everything seems to be working, except the camera is blurry, but that seams to be the norm.
Included is the rom, radio and kernel
ROM: 2.2.1
Kernel: 2.6.25
Radio: KAISER 1.70.19.09
Panel: 2
Key Map: US Normal
Resolution: 240x320
Storage: Nand & Nand
Most everything is installed in userspace and can be uninstalled or upgraded.
Oh got GO Launcher EX installed (Also in user space)
Credits:
I stole ideas from, and used following tools:
Makers of atools
Makers of NBH creator
HTC Flasher
kallt_kaffe
Krazy-Killa
dzo (dzo's posts wore a big help. just wish he would answer his own questions after he found the solution)
n2rjt
and many more.
@todo
Resize NAND partitions to the smaller system size
Original post and download Links are posted on my blog:
http://press.pzzazz.net

Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?

MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
Yeah witch apps are include. Some yours tweaks or etc... ???

MaRekRM said:
Can you write something more about this? Is this your system and kernel(compiled yourself)? Any changes?
Click to expand...
Click to collapse
That sounds like a trick question.
Yes, at first I compiled everything my self but then to resolve bugs, I looked at other systems and basically stole stuff from them to fix my bugs. In other words, I can't take all the credit, it was a community effort.

Neo2SHYAlien said:
Yeah witch apps are include. Some yours tweaks or etc... ???
Click to expand...
Click to collapse
I removed most everything from the system and installed it in user space. So the system is very lean. You can uninstall what you don't like.

how is the rom？just waiting to see

gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.

Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.

tundelogic said:
Please, I don't really understand how to go upgrade this. I find it hard to do. Is everything needed packaged in this download, or please can u list things needed to change to android. I'll appreciate your response.
Click to expand...
Click to collapse
here is the howto
http://forum.xda-developers.com/showthread.php?t=680518

kkp said:
gruessle ...!! thanks for your efforts in getting this done... I been looking from long time to install Android on my HTC TyTN II. However i was not able to get the proper build...
can you share the screenshots of the build which you provided as well some steps at high level on installing this..
Thanks in advance.
Click to expand...
Click to collapse
The screenshots are not important.
This is not a theme.
You can install a theme from here, for example if you like:
http://golauncher.goforandroid.com/category/themes/
The theme it comes with is the:
Go Louncher Classical Theme (The new version of it)
The software installed is also not important, because you can remove it.
Google Market is installed, and you can install what ever you like, just like on your computer.
https://market.android.com/
This is the actual android froyo operating system.

Anyone else having trouble getting the kernel to install?
I get to 33% and the phone reboots...
Radio installed fine even though I was already using 1.70.19.09, just to be sure I installed everything in the package.

Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);

I also tried to install this kernel but I can't. Flashing in hardspl after few second give folowing error:
00018003
Os Fail
Update Terminate
UPDATE Fail.
Changing parameters in atools not helping. Every another kernel is flashing without problems so it's not phone fault

Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.

Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.

BTW, I call shenannegans on one of the 5-star votes... just sayin'.

Your kernel have fake ;/ . rom works great ;D
sorry for bad english;p

PoXFreak said:
Ok, quick "bug report":
After working with the kernel pack multiple times I have come to the conclusion that there might be a bug in the actual kernel file itself, throwing a code back to HardSPL and RUU (how I install).
I first noticed a problem in that the kernel was originally set up for a Polaris and had no resolution set. The size of the file should be unimportant as Scoot's newer kernel is in the order of 3.2-3.3MB in size (with the RIL patch installed it gets even larger), this one is 3,099KB, and l1q1d's is almost always 3,092KB.
The second issue I noticed is with the Froyo package itself... It's split up into many files (open the package in 7zip and you'll see what I mean). Normally, the packer has the files all listed inside the .tgz file, this one has the files inside many other files.
I have thus not installed the system on either phone because (correct me if I'm wrong), the kernel contains the basic directories for where everything is installed, and if I were to try and install this package on say, l1q1d's kernel, the phone would most likely crash because the files would not be found, including /system.
If ANYONE wants to dig deeper into this problem, feel free to message me. Personally, I think we've about finished getting all we can from the Kaiser, and much respect goes out to those who have done all the work in the past, but there's always that glimmer of hope that someone will find a way to pack this into a working rom installable through RUU or HardSPL.
I have one last thing to say:
Gruessle, please do your homework BEFORE posting things like this. There are people out there who still depend on this phone to operate as it is their only phone. I Personally cannot afford to go spend $100-200 on a replacement phone if this one goes down (thats why I have 2 of them). If you post something that does not work on the platform that you say it will, please correct it or move it to the proper forum.
Click to expand...
Click to collapse
1) The kernel doesn't care where you place the files. Right now I use a debian system with Ferora and Gentoo in a chroot. Both work fine with the Debian kernel.
In other words, if you have a kernel that works for you then use that it should work with the rest of the installation.
2) I don't get what you mean with files are "split up into many files", I am just guessing but you must be extracting it wrong. Maybe it's a windows thing, I haven't used windows in 15 years so I wouldn't be able to help you with that.
3) I have included everything you need to duplicate what I got, which works for me, and it appears to work for others too. Now i don't use that phone much, and there might be bugs I am unaware of, but don't tell me it doesn't work at all, just because you can't get it to work.

barmalini said:
Gruessle, thanks for your efforts! I want to try your rom but being a noob waiting for more comprehensive list of known errors before flashing it to my kaiser.
Click to expand...
Click to collapse
barmalini, it appears that a few people have trouble installing the Kernel, but the ROM seams to work for everybody as far as I can tell.
According to my server records the files have been downloaded over 200 times and I have yet to hear a complain about the ROM.
So I would say try to install the Kernel, but if you can't still use the ROM with a Kernel that works for you.
If you have trouble installing from windows you can also try a live CD from debian or knoppix. I installed everything from a Debian system. (Knoppix is based on Debian)
If you don't know what a live CD is then go here for info:
http://wiki.debian.org/LiveCD

PoXFreak said:
Installed HardSPL 3.34 and a WinMo 6.1 rom (custom) to see whats wrong. Installed L1q1d's kernel and goes right in like it should.
Checked .NBH with NBHCreator and only found 1 thing wrong: kernel set to Eclair instead of Froyo. Changed to Froyo and saved, attempted reflash and still won't go in...
;(Losted);
Click to expand...
Click to collapse
PoXFreak,
you are not the only one having trouble, installing the ROM it appears.
I am wondering, are you also using Microsoft Windows to install the ROM?
If so can you try again with Linux, because it worked fine for me.
If you don't have Linux you can use a Live CD
Also if you can't get it to work, try the ROM with a Kernel that works for you.
Please report, I will check back.