[Q] Volume Profiles - Bluetooth and Headphones should be seperate levels - EVO 4G Q&A, Help & Troubleshooting

I have a small issue that may not be possible to resolve, but I don't understand why they have a BlueTooth volume control when all of my BT headsets and car stereo have independent volume controls, thus negating the need for there to be a stock BT profile with volume. This is only an issue because when I am wanting there to be an option to always go 100% volume with BT and use my current Media Volume for headphones and speakerphone output.
Does anyone have a fix for this? I have a theory that this can be done via Tasker (if that is the consensus, I will work on it and post a how-to if this is a popular request), but if this is a development issue and requires some BT Profile modifications, I can open a request in Development rather than Q&A.
Am I the only one annoyed at this? Or are there users that benefit from the BT Volume profile?
I always get blasted when using headsets or can't hear when in the car thus invalidating the hands-free component while I reach for the phone to hit the Volume Up button...

Related

Bluetooth Volume

I've searched and found 3 other threads on the same issue but with no solution
Is there any way to make audio from the ppc louder when streaming through a bluetooth headdset
thanks very much for viewing
I don't think it's possible to set higher volume than maximum volume provided by all 3 of headset, device volume and (sometimes) application volume. If all of these are set to max and it's still not enough, think about modification of the audio you are listening to.
Probably different version of BT stack (in different roms) might give a bit different volume, but I haven't noticed this effect (must not be so significant after all)

Control bluetooth headset volume? Sony HBH-IS800

I just paired a Sony bluetooth headset (HBH-IS800) with my Tilt 2 and the volume is quite loud when listening to music. I put media player sound volume down to 5%, apparently the lowest, and it's still very loud. The only other option at that point is going down to 0%, obviously too quiet :-|
Also, the main system volume slider on the side - no effect on the headset whatsoever. Whether it's maxed out or silent - the bluetooth headset is still too loud.
Does anyone have any recommendations on:
1) How to go between <5% and >0% volume on media player?
2) How to get the main volume control to affect the bluetooth headset volume?
3) Any other ideas on lowering the music volume overall? Maybe another (better?) music player could work? Maybe a reg setting I can modify?
Any advice is appreciated - the headset is so cool - I'd love to make it usable!!! - TIA!
-Fnortner
P.S. - I called Sony - their answer: "We don't support the headset unless it's paired with a Sony phone". Boo Sony!
I have the same problem with this headset.
I had it running on the Touch HD with volume control from the device works perfectly.
Is there any solution yet?
same volume control issue with BT8040
With both Media Player or PocketTunes, I am not able to alter the volume on the BT8040, either from the Tilt2, or the earpiece itself.
Never had this problem with the same earpiece and my original Tilt.
Same problem here
I have the same problem. I have a bluetooth set which I connect to FM transmiter. The problem is: Volume is all the way up so the music is horrible, it gets distorted. I'd like to know how to manage the bluetooth volume in the system settings, is there a way? Pushing the left buttons (system volume) wont affect bluetooth volume, neither any other volume control within the settings. Any help appreciated.
I have found a solution that works for me. I use Nitrogen Player and you can just turn the equalizer on and change the preamp level to close to the bottom. Works a treat for me.
Code:
Options -> Settings -> Equalizer.
http://code.google.com/p/microfi-nitrogen/
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
dahauss said:
I have a bluetooth stereo headset and when I pair it it tells me that I can not control the volume from the phone.. any way to fix??
Click to expand...
Click to collapse
Same problem to me... I listen often to internet radio, but now it's too loud :-(
Same Problem here...
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
jon5kr said:
If anyone came up with a solution for this that works native to the ROM (vs just adjusting the eq) post it here, and I'll do the same.
Click to expand...
Click to collapse
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
From the research I've done, the culprit is the sub-par Widcomm bluetooth stack in the phone, and I haven't yet found anyone who has engineered a replacement stack. I know the possibility exists (I upgraded the bluetooth stack on my Wizard a couple of years ago to get one that had the A2DP profile), but I just don't think anybody has made a replacement for this model yet
sirphunkee said:
I have a stereo BT headset, and whenever I pair it with my (tmo US) TP2, the phone throws up a standard "you have to adjust the volume from the headset, can't do it from the handset" warning...and when I do use the volume controls on the headset, the volume does adjust accordingly, but without any feedback from the phone (no volume slider or other indication), so the adjustment is obviously happening in the headset's circuitry, and the audio coming from the phone is at a static, un-adjustable level.
Click to expand...
Click to collapse
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Oooops. Meant Bluetooth 2.0 vs Bluetooth 2.1.
jon5kr said:
Thanks for the reply! My situation is backwards in the sense that the headset doesn't have volume controls - and what I seem to be finding is that there doesn't seem to be an immediate fix for controlling a headset from the phone. I did use a tool called "Advanced Config" to find a default music volume that I can change, so I lowered that from 100 to 50 and now the volume is at least comfortable. However I have no control over it yet....
Click to expand...
Click to collapse
Yes, for some reason, the BT stack in this phone seems to assume that all BT stereo headsets also have built-in controls on them and won't allow them to adjust system volume. I think we're probably stuck with that fact until somebody finds a BT stack to replace the TP2's native one.
The best workaround for now may be just to find and use a headset that does have volume controls. I'll be posting a review soon of the ones I have now, the Plantronics/Altec Lansing Backbeat 903's
jonto said:
Could these issues be due to USB 2.0 versus USB 2.1 ?
I got a Motorola H17 (USB 2.1) and everything works perfect. Have volumn control from phone and headset and all audio sources work fine.
Click to expand...
Click to collapse
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
sirphunkee said:
So when you play music through it, you can control the volume on the handset itself, and with controls on the headset? If so, I'm guessing it's because that's a monaural (not stereo) headset, so it may not be the same volume. My headset has BT 2.1 on it, and while I can control the playback etc on the phone, the volume controls only adjust the headset volume, not the volume on the phone.
Click to expand...
Click to collapse
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
jonto said:
This may be true since it is only monaural. The volume control (on the phone) still controls the phone (thus the headset) while the BT control only controls the BT headset.
Click to expand...
Click to collapse
Good evening,
If it can help you with tcpmp-0. 72RC1 - GF5500Edition - Alpha4. 1 can adjust the volume of this famous helmet HBH-IS800 and it is easier than with nitrogene.
Good evening
Ichtus
if its is supported by only sony phones(BB storm too) then can we get the profile from a xperia and install it on another device
I have seen multiple people state they can adjust the volume both on their headset and on the handset asystem volume. I thought perhaps it was the BT stack EXCEPT I was able to do this as well before I did a hard reset now I cannot adjust the 2 volume controls independently. The handset volume is static. Will someone that can adjust the system volume with a headset compare settings/egistry entries with me?
Is there a way we can adjust the volume of the line out from the bluetooth connection, anyone, lately ive have noticed that most devices are doing this, dont want to revert to a old stack but there has to be a way to combine the headset volume with the bluetooth volume

Volume auto-lowers on headphone insert?

Connect your phone to a stereo with a standard 3.5mm audio cable and set media volume to max. Play some music, eject the cable, plug it back in, resume playing music. For some reason the audio volume is automatically lowered. Increasing it back to max works just fine but you do get a notification saying "Loud music may harm your hearing if you listen to it for a long time" while you do that.
I only listen to music in my car using aux 3.5mm. I control volume using the headunit and this "feature" is annoying as heck.
Any way to disable the volume auto-lowering?
thats the way all of them work, also was the same on old galaxy s device. happens on ipad also.
i think the reason is they dont want you blowing your brains out when you plug your headphones in if you forgot to turn down the media volume before you unplugeed them
I've been in HTC world for past 5 years and never had a need for such feature... all I'm trying to figure out is how to disable this on my new sammy ​
I listen via the 3.5 port in my car and can confirm the original Epic 4G did NOT behave this way. (At least not when running stock--Voodoo drivers did do this by default but you could override them.)
It pisses me off too and the NS4G never did this when I had it. I can live with it but just annoying.
I solved it through tasker. Not elegant, but it works.
true, also a hack... solves one problem but creates another. when i DO use headphones i set volume low and taking 3.5mm out and back in resets volume to max. ouch
i wonder if there is a way in Tasker to simply re-set volume to whatever it was just before 3.5mm was inserted.
Yea, you can do this. Create a variable to hold the volume, update it whenever the media volume is changed. When headphones are plugged it, just set the volume based on the variable. Imo, this wouldn't help much though. If you insist on playing media at max volume through your car, you're still going to blow up your ears when you plug in headphones.
I'd recommend setting the volume offset on your stereo (slack on some radios, I think) to be ideal when the phone is at the reduced volume. This is what I do.
Sycobob said:
I'd recommend setting the volume offset on your stereo (slack on some radios, I think) to be ideal when the phone is at the reduced volume. This is what I do.
Click to expand...
Click to collapse
the issue at hand is a bit more complex. consider this scenario:
i'm in a car driving and someone calls me.
i pop out the 3.5mm and answer the call.
once done talking, i pop 3.5mm back in and resume music.
now the volume is NOT what it was since sgs2 lowered it automatically trying to "save" my hearing.
similar story happens when i get out of my car for few minutes and upon coming back in i constantly have to turn the volume back up.
changing the in-car headunit volume is not helping since my cell is not the only device used there. there is built-in radio, built-in cd player, other portable players, etc that i (and others) use. no need to tweak main system just because one of many devices is being an #!$le about media volume.
ugh, still looking for a right solution. i'll go ahead and try to mess with tasker but that will be just patching the problem, not solving it
frifox said:
Connect your phone to a stereo with a standard 3.5mm audio cable and set media volume to max. Play some music, eject the cable, plug it back in, resume playing music. For some reason the audio volume is automatically lowered. Increasing it back to max works just fine but you do get a notification saying "Loud music may harm your hearing if you listen to it for a long time" while you do that.
I only listen to music in my car using aux 3.5mm. I control volume using the headunit and this "feature" is annoying as heck.
Any way to disable the volume auto-lowering?
Click to expand...
Click to collapse
TRY THIS
Hi
Download and buy license from "SOUNDABOUT"
1. Enable it
Update the below
2. Call volume to EAR PIECE
3. Media to SPEAKER
everything will be ok...after many year it has worked for my HTC ONE E9PLUS
Robin

Car bluetooth volume

Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
angka8 said:
Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
Click to expand...
Click to collapse
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
This happens to me when I have connected to my bluetooth headphones and turned the volume down. When I connect again in the car the volume stays at what the headphones were at and I have to turn the volume up on the phone. After that it sticks until I use my headphones again.
csick said:
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
Click to expand...
Click to collapse
Ok let me try option. Thanks.
Headsets tend to control the bt volume on the phone. Cars often have their own volume and don't send volume commands to the phone.
angka8 said:
Anyway to increase the car Bluetooth volume? Pixel XL is way too soft compare with all my previous phone. Thanks.
Click to expand...
Click to collapse
I agree, I've found myself turning the car volume up 3-4 more turns than I used to. Not a huge deal, but definitely noticeable.
I've noticed the same thing on my Pixel XL while on bluetooth in my car but I'm also using the new Android Auto app as well.
Yesterday i noticed that while driving home from work i had low volume on my music (Car radio & phone were max volume) but while using Google Play music it went to a commercial (Don't pay for it) and started went very loud. After the commercial was over it went back to low volume?
Does this remind anyone of the TV commercial having loud volume issue to get your attention?
Can anyone confirm my suspicion?
Bluetooth gain/volume has always been an issue for me.
I make a lot of DIY portable bluetooth speakers as a hobby and BT input volume is a huge issue compared vs. analog input.
I finally found a Chinese BT amplifer manufacturer who was willing to mod their amp's BT input with higher gain. This helped considerably.
My old JVC car stereo was awful. I was always having to boost the BT output gain.
My 2015 Kia Optima's Infinity stereo doesn't have the same issue. BT volume is fine.
If you are willing to root and try a mod on your phone, the Viper4Android mod lets you raise Bluetooth gain:
http://forum.xda-developers.com/pixel-xl/themes/mod-weta-audio-t3491179
Hope this helps.
csick said:
This may be a dumb question, but did you try turning up the volume on the phone? I know my phone likes to reset the volume to really low when my car connects sometimes. After I turn the volume back up on the phone it's plenty loud in my car stereo.
Failing that, there's a "Disable absolute Volume" option for Bluetooth audio in developer options you could try.
Click to expand...
Click to collapse
This is not working. Hopefully the update will resolve this.

very low Bluetooth volume output

I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
hpsauce37 said:
I have noticed that when either connected to Bluetooth headphones or streaming to my car stereo that I am having to turn the volume up to nearly 90% just to get a reasonable volume.
Any work around for this ?
Click to expand...
Click to collapse
Yea I have a pair of wireless beatsx, but those headphones are junk anyway. Can not get them "loud". Maybe its the phone/bluetooth..
I noticed the same thing when I first paired the 7t with my car's BT. I don't consider it a problem because all I had to do was raise the volume on the car radio, and it remembered the setting. But I'm only listening to navigation prompts and voice phone calls. I haven't tried it with music.
Anyone solved this problem?
While using headphones or any audio-bt devices connected to oneplus 7t i can get only around 70-80% of max device volume.
My bluetooth can get painfully loud on any system... Are you sure you are not facing to sets of volume controls?
Some "dumb" headphones / speakers just have one output volume and you control loudness via the phone volume. Others have their own volume processing (like a car stereo). If you max out your phone volume then you can control the loudness via the stereo.
Numerous times I've been in the car and can't figure out why I need to turn the stereo volume up so high only to realize I've bumped the phone volume to a low setting.

Categories

Resources